Publications

Results 96876–96900 of 100,993

Search results

Jump to search filters

Radiation dose modeling using IGRIP and Deneb/ERGO

Davis, K.R.

The Radiological Environment Modeling System (REMS) quantifies dose to humans in radiation environments using the IGRIP (Interactive Graphical Robot Instruction Program) and Deneb/ERGO (Ergonomics) simulation software products. These commercially available products are augmented with custom C code to provide the radiation exposure information to and collect the radiation dose information from the workcell simulations. The emphasis of this paper is on the IGRIP and Deneb/ERGO parts of REMS, since that represents the extension to existing capabilities developed by the authors. Through the use of any radiation transport code or measured data, a radiation exposure input database may be formulated. User-specified IGRIP simulations utilize these database files to compute and accumulate dose to human devices (Deneb`s ERGO human) during simulated operations around radiation sources. Timing, distances, shielding, and human activity may be modeled accurately in the simulations. The accumulated dose is recorded in output files, and the user is able to process and view this output. REMS was developed because the proposed reduction in the yearly radiation exposure limit will preclude or require changes in many of the manual operations currently being utilized in the Weapons Complex. This is particularly relevant in the area of dismantlement activities at the Pantex Plant in Amarillo, TX. Therefore, a capability was needed to be able to quantify the dose associated with certain manual processes so that the benefits of automation could be identified and understood.

More Details

Modal parameter extraction from large operating structures using ambient excitation

James III, G.H.; Carne, T.G.; Mayes, R.L.

A technique called the Natural Excitation Technique or has been developed to response extract response parameters from large operational structure when subjected to random and unmeasured forces such as wind, road noise, aerodynamics, or waves. Six applications of NExT to ambient excitation testing and NExT analysis are surveyed in this paper with a minimum of technical detail. In the first application, NExT was applied to a controlled-yaw Horizontal-Axis Wind Turbine (HAWT). By controlling the yaw degree of freedom an important class of rotating coordinate system effects are reduced. A new shape extraction procedure was applied to this data set with good results. The second application was to a free-yaw HAWT. The complexity of the response has prompted further analytical studies and the development of a specialized visualization package. The third application of NExT was to a parked three-bladed Vertical-Axis Wind Turbine (VAWT) in which traditional modal testing could not excite all modes of interest. The shape extraction process used cross-correlation functions directly in a time-domain shape-fitting routine. The fourth application was to ground transportation systems. Ongoing work to improve driver and passenger comfort in tractor-trailer vehicles and to refine automobile body and tire models will use NExT. NExT has been used to process ambient vibration data for Finite Element Model correlation and is being used to study Structural Health Monitoring with ambient excitation. Shape fitting was performed using amplitude and phase information taken directly from the cross-spectra. The final application is to an offshore structure. This work is on-going, however initial studies have found a high-modal density, high noise content, and sparse data set.

More Details

Low-power approaches for parallel, free-space photonic interconnects

Carson, R.F.

Future advances in the application of photonic interconnects will involve the insertion of parallel-channel links into Multi-Chip Modules (MCMS) and board-level parallel connections. Such applications will drive photonic link components into more compact forms that consume far less power than traditional telecommunication data links. These will make use of new device-level technologies such as vertical cavity surface-emitting lasers and special low-power parallel photoreceiver circuits. Depending on the application, these device technologies will often be monolithically integrated to reduce the amount of board or module real estate required by the photonics. Highly parallel MCM and board-level applications will also require simplified drive circuitry, lower cost, and higher reliability than has been demonstrated in photonic and optoelectronic technologies. An example is found in two-dimensional point-to-point array interconnects for MCM stacking. These interconnects are based on high-efficiency Vertical Cavity Surface Emitting Lasers (VCSELs), Heterojunction Bipolar Transistor (HBT) photoreceivers, integrated micro-optics, and MCM-compatible packaging techniques. Individual channels have been demonstrated at 100 Mb/s, operating with a direct 3.3V CMOS electronic interface while using 45 mW of electrical power. These results demonstrate how optoelectronic device technologies can be optimized for low-power parallel link applications.

More Details

Application of spreadsheets to standardize transportation radiological risk assessments

Mcclure, J.D.

Because of the complexity, volume of data and calculations required, one preferred analytical tool to perform transportation risk assessments is the RADTRAN computer code. RADTRAN combines user-determined material, packaging, transportation, demographic and meteorological factors, with health physics data to calculate expected radiological consequences and accident risk from transporting radioactive materials by all commercial modes including truck, rail, ship, air and barge. The computer code consists of two major modules for each transport mode: the incident-free module, in which doses from normal transport are calculated; and the accident module, in which dose consequences and probabilities are evaluated to generate risk estimates. The purpose of this presentation is to describe the development of a standardized procedure to perform transportation radiological risk assessments employing conventional spreadsheet programs to automate generation of RADTRAN input files and post-processing analysis of the resulting output.

More Details

Sandia National Laboratories/New Mexico 1994 site environmental report. Summary pamphlet

Salinas, Stephanie A.

This document presents details of the environmental activities that occurred during 1994 at Sandia National Laboratories. Topics include: Background about Sandia; radiation facts; sources of radiation; environmental monitoring; discussion of radiation detectors; radioactive waste management; environmental restoration; and quality assurance.

More Details

Cooperative business management strategies for the U.S. integrated textile complex

Washington, Kenneth

The mission of the American Textile (AMTEX{trademark}) Partnership is to engage the unique technical resources of the Department of Energy National Laboratories to work with the US Integrated Textile Complex (US ITC) and research universities to develop and deploy technologies that will increase the competitiveness of the US ITC. The objectives of the Demand Activated Manufacturing Architecture (DAMA) project of AMTEX are: (1) to determine strategic business structure changes for the US ITC; (2) to establish a textile industry electronic marketplace, (3) to provide methods for US ITC education ad implementation of an electronic marketplace. The Enterprise Modeling and Simulation Task of DAMA is focusing on the first DAMA goal as described in another paper of this conference. The Cooperative Business Management (CBM) Task of DAMA is developing computer-based tools that will render system-wide information accessible for improved decision making. Three CBM strategies and the associated computer tools being developed to support their implementation are described in this paper. This effort is addressing the second DAMA goal to establish a textile industry electronic marketplace in concert with the Connectivity and Infrastructure Task of DAMA. As the CBM tools mature, they will be commercialized through the DAMA Education, Outreach and Commercialization Task of DAMA to achieve the third and final DAMA goal.

More Details

Fatigue reliability of wind turbine fleets: The effect of uncertainty of projected costs

Veers, Paul S.

The cost of repairing or replacing failed components depends on the number and timing of failures. Although the total probability of individual component failure is sometimes interpreted as the percentage of components likely to fail, this perception is often far from correct. Different amounts of common versus independent uncertainty can cause different numbers of components to be at risk of failure. The FAROW tool for fatigue and reliability analysis of wind turbines makes it possible for the first time to conduct a detailed economic analysis of the effects of uncertainty on fleet costs. By dividing the uncertainty into common and independent parts, the percentage of components expected to fail in each year of operation is estimated. Costs are assigned to the failures and the yearly costs and present values are computed. If replacement cost is simply a constant multiple of the number of failures, the average, or expected cost is the same as would be calculated by multiplying by the probability of individual component failure. However, more complicated cost models require a break down of how many components are likely to fail. This break down enables the calculation of costs associated with various probability of occurrence levels, illustrating the variability in projected costs. Estimating how the numbers of components expected to fail evolves over time is also useful in calculating the present value of projected costs and in understanding the nature of the financial risk.

More Details

Development of a corrosion detection experiment to evaluate conventional and advanced NDI techniques

Roach, Dennis P.

The Aging Aircraft NDI Validation Center (AANC) was established by the Federal Aviation Administration Technical Center (FAATC) at Sandia National Laboratories in August of 1991. The goal of the AANC is to provide independent validation of technologies intended to enhance the structural inspection of aging commuter and transport aircraft. The deliverables from the AANC`s validation activities are assessments of the reliability of existing and emerging inspection technologies as well as analyses of the cost benefits to be derived from their implementation. This paper describes the methodology developed by the AANC to assess the performance of NDI techniques. In particular, an experiment being developed to evaluate corrosion detection devices will be presented. The experiment uses engineered test specimens, as well as complete aircraft test beds to provide metrics for NDI validation.

More Details

Sandia National Laboratories Institutional Plan: FY 1996--2001

Garber, D.P.

Sandia`s Institutional Plan is by necessity a large document. As their missions have grown and diversified over the past decades, the variety of technical and site activities has increased. The programs and activities described here cover an enormous breadth of scientific and technological effort--from the creation of new materials to the development of a Sandia-wide electronic communications system. Today, there are three major themes that greatly influence this work. First, every federally funded institution is being challenged to find ways to become more cost effective, as the US seeks to reduce the deficit and achieve a balanced federal spending plan. Sandia is evaluating its business and operational processes to reduce the overall costs. Second, in response to the Galvin Task Force`s report ``Alternative Futures for the Department of Energy National Laboratories``, Sandia and the Department of Energy are working jointly to reduce the burden of administrative and compliance activities in order to devote more of the total effort to their principal research and development missions. Third, they are reevaluating the match between their missions and the programs they will emphasize in the future. They must demonstrate that Sandia`s roles--in national security, energy security, environmental integrity, and national scientific and technology agenda support--fit their special capabilities and skills and thus ensure their place in these missions for the longer planning horizon. The following areas are covered here: Sandia`s mission; laboratory directives; programmatic activities; technology partnerships and commercialization; Sandia`s resources; and protecting resources and the community.

More Details

An integrated approach to product development and manufacturing

Readey, M.J.

A new approach to product development is described that integrates various unit operations into a unified ``knowledge-base``. This knowledge-base is easily accessible to all members of the design team due to the advent of high performance and networking capabilities of today`s desktop computers. This permits rapid optimization of the product`s material, shape, and manufacturing processes that satisfy the customer`s performance requirements while maximizing economic return for the manufacturer.

More Details

Update on the Federal Facilities Compliance Act disposal workgroup disposal site evaluation - what has worked and what has not

Waters, Robert D.

The Department of Energy (DOE) has been developing a planning process for mixed low-level waste (MLLW) disposal in conjunction with the affected states for over two years and has screened the potential disposal sites from 49 to 15. A radiological performance evaluation was conducted on these fifteen sites to further identify their strengths and weaknesses for disposal of MLLW. Technical analyses are on-going. The disposal evaluation process has sufficiently satisfied the affected states` concerns to the point that disposal has not been a major issue in the consent order process for site treatment plans. Additionally, a large amount of technical and institutional information on several DOE sites has been summarized. The relative technical capabilities of the remaining fifteen sites have been demonstrated, and the benefits of waste form and disposal facility performance have been quantified. However, the final disposal configuration has not yet been determined. Additionally, the MLLW disposal planning efforts will need to integrate more closely with the low-level waste disposal activities before a final MLLW disposal configuration can be determined. Recent Environmental Protection Agency efforts related to the definition of hazardous wastes may also affect the process.

More Details

Surface morphology and microstructure of Al-O alloys grown by ECR plasma deposition

Barbour, J.C.

The growth of polycrystalline and amorphous aluminum-oxygen alloy films using electron-beam evaporation of Al in the presence of an O{sub 2} electron-cyclotron-resonance (ECR) plasma was investigated for film compositions varying from 40% Al (Al{sub 2}O{sub 3}) to near 100% Al (AlO{sub x}). Processing parameters such as deposition temperature and ion energy were varied to study their effects on surface texture and film microstructure. The Al-rich films (AlO{sub x}) contain polycrystalline fcc Al grains with finely dispersed second-phase particles of {gamma}-Al{sub 2}O{sub 3} (1-2 nm in size). The surface roughness of these films was measured by atomic force microscopy and found to increase with sample bias and deposition temperature. Stoichiometric Al{sub 2}O{sub 3} films grown at 100{degrees}C and 400{degrees}C without an applied bias were amorphous, while an applied bias of -140 V formed a nanocrystalline {gamma}-Al{sub 2}O{sub 3} film at 400{degrees}C. The surface roughness of the Al{sub 2}O{sub 3} increased with temperature while ion irradiation produced a smoother surface.

More Details

Management of citation verification requests for multiple projects at Sandia National Laboratories

Crawford, C.S.

Sandia National Laboratories` (SNL) Technical Library is now responsible for providing citation verification management support for all references cited in technical reports issued by the Nuclear Waste Management (NWM) Program. This paper dancing how this process is managed for the Yucca Mountain Site Characterization (YWP), Waste Isolation Pilot Plant (WIPP), Idaho National Engineering Laboratory (INEL), and Greater Confinement Disposal (GCD) projects. Since technical reports are the main product of these projects, emphasis is placed on meeting the constantly evolving needs of these customers in a timely and cost-effective manner.

More Details

Very high intensity fiber transmission systems

Setchell, Robert E.

Various applications are currently motivating interest in the transmission of very high laser intensities through optical fibers. As intensities within a fiber are increased, however, laser breakdown or laser-induced fiber damage will eventually occur and interrupt fiber transmission. For a number of years we have been studying these effects during the transmission of Q-switched, Nd/YAG laser pulses through step-index, multimode, fused-silica fiber. We have found that fiber transmission is often limited by a plasma-forming breakdown occurring at the fiber entrance face. This breakdown results in subtle surface modifications that can leave the surface more resistant to further breakdown or damage events. Catastrophic fiber damage can also occur as a result of a number of different mechanisms, with damage appearing at fiber end faces, within the initial ``entry`` segment of the fiber path, and at other internal sites due to effects related to the particular fiber routing. An overview of these past observations is presented, and issues requiring further study are identified.

More Details

Electroreflectance and the problem of studying plasma-surface interactions

Preppernau, B.L.

A long standing problem in low-temperature plasma discharge physics is to understand in detail the mutual interaction of real exposed surfaces (electrodes) with the reactive plasma environment. In particular, one wishes to discern the influence of these surfaces on the plasma parameters given their contributions from secondary electrons and ions. This paper briefly reviews the known surface interaction processes as well as currently available diagnostics to study the interface between plasmas and surfaces. Next comes a discussion describing the application of plasma-modulated electroreflectance to this research and some potential experimental techniques.

More Details

Low-energy deposition of high-strength Al(0) alloys from an ECR plasma

Barbour, J.C.

Low-energy deposition of Al(O) alloys from an electron cyclotron resonance (ECR) plasma offers a scaleable method for the synthesis of thick, high-strength Al layers. This work compares alloy layers formed by an ECR-0{sub 2} plasma in conjunction with Al evaporation to 0-implanted Al (ion energies 25-200 keV); and it examines the effects of volume fraction of A1{sub 2}0{sub 3} phase and deposition temperature on the yield stress of the material. TEM showed the Al(O) alloys contain a dense dispersion of small {gamma}-Al{sub 2}0{sub 3} precipitates ({approximately}l nm) in a fine-grain (10-100 nm) fcc Al matrix when deposited at a temperature of {approximately}100C, similar to the microstructure for gigapascal-strength 0-implanted Al. Nanoindentation gave hardnesses for ECR films from 1.1 to 3.2 GPa, and finite-element modeling gave yield stresses up to 1.3 {plus_minus} 0.2 GPa with an elastic modulus of 66 GPa {plus_minus} 6 GPa (similar to pure bulk Al). The yield stress of a polycrystalline pure Al layer was only 0.19 {plus_minus} 0.02 GPa, which was increased to 0.87 {plus_minus} 0.15 GPa by implantation with 5 at. % 0.

More Details

Multidimensional electron-photon transport with standard discrete ordinates codes

Drumm, Clifton R.

A method is described for generating electron cross sections that are compatible with standard discrete ordinates codes without modification. There are many advantages of using an established discrete ordinates solver, e.g. immediately available adjoint capability. Coupled electron-photon transport capability is needed for many applications, including the modeling of the response of electronics components to space and man-made radiation environments. The cross sections have been successfully used in the DORT, TWODANT and TORT discrete ordinates codes. The cross sections are shown to provide accurate and efficient solutions to certain multidimensional electronphoton transport problems.

More Details

Impacts of seismic activity on long-term repository performance at Yucca Mountain

Wilson, Michael L.

Several effects of seismic activity on the release of radionuclides from a potential repository at Yucca Mountain are quantified. Future seismic events are predicted using data from the seismic hazard analysis conducted for the Exploratory Studies Facility (ESF). Phenomenological models are developed, including rockfall (thermal-mechanical and seismic) in unbackfilled emplacement drifts, container damage caused by fault displacement within the repository, and flow-path chance caused by changes in strain. Using the composite-porosity flow model (relatively large-scale, regular percolation), seismic events show little effect on total-system releases; using the weeps flow model (episodic pulses of flow in locally saturated fractures), container damage and flow-path changes cause over an order of magnitude increase in releases. In separate calculations using, more realistic representations of faulting, water-table rise caused by seismically induced changes in strain are seen to be higher than previously estimated by others, but not sufficient to reach a potential repository.

More Details

Calibration of an explosives vapor generator based on vapor diffusion from a condensed phase

Parmeter, John

Development of a vapor generator for consistently producing accurate amounts of vapor from low vapor pressure explosive materials is a pressing need within the explosives detection community. Of particular importance for reproducibility and widespread acceptance of results is the correlation of such a vapor generator to a National Institute of Standards and Technology (NIST) mass standard. This paper describes an explosives vapor generator recently developed at Varian in which a solid explosive sample in a precision bore glass tube is put in an oven at constant temperature, and vapor diff-using from the top of the tube is entrained in a carrier gas flow. The rate of vapor output is thus dependent on both the equilibrium vapor pressure of the solid at oven temperature and the rate of diffusion up the length of the tube. Correlation to a NIST mass standard is achieved by periodic weighing of the sample tube on a microbalance. We report results obtained with the explosives TNT and RDX. Results for TNT show that the mass output rate is constant over hundreds of hours of continuous use, with outputs of {approximately} 10--2000 pg/sec for oven temperatures in the range of 60--120{degrees}C. Both the mass loss experiments and calibration with an ion mobility spectrometer (IMS) give a TNT mass output value of 85 pg/sec at 79{degrees}C, and this result is supported by transport theory calculations. Mass loss curves for RDX are also linear with time, and show the expected exponential increase of mass output with oven temperature.

More Details

Automatic design of 3-d fixtures and assembly pallets

Brost, Randolph

This paper presents an implemented algorithm that automatically designs fixtures and assembly pallets to hold three-dimensional parts. The designed fixtures rigidly constrain and locate the part, obey task constraints, are robust to part shape variations, are easy to load, and are economical to produce. The algorithm is guaranteed to find the global optimum solution that satisfies these and other pragmatic conditions. We present the results of the algorithm applied to several practical manufacturing problems. For these complex problems the algorithm typically returns initial high-quality fixture designs in less than two minutes, and identifies th global optimum design in just over an hour.

More Details

Micro-machined heat pipes in silicon MCM substrates

Benson, D.A.

Multichip modules (MCMs) containing power components need a substrate with excellent heat spreading capability both to avoid hot spots and to move dissipated heat toward the system heat sinks. Polycrystalline diamond is an excellent MCM heat spreading substrate but remains several orders of magnitude too expensive and somewhat more difficult to process than conventional mother-board materials. Today`s power MCMs concentrate on moderately priced silicon wafers and aluminum nitride ceramic with their improved thermal conductivity and good thermal expansion match to power semiconductor components, in comparison to traditional alumina and printed wiring board materials. However, even silicon and AlN substrates are challenged by designers` thermal needs. We report on the fabrication of micro-heat pipes embedded in silicon MCM substrates (5{times}5 cm) by the use of micromachined capillary wick structures and hermetic micro-cavities. This passive microstructure results in more than a 5 times improvement in heat spreading capability of the silicon MCM substrate over a large range of power densities and operating temperatures as compared with silicon alone. Thus diamond-like cooling is possible at silicon prices.

More Details

Characterization and assessment of HTML style guides

Ratner, J.

This paper describes a study in which HTML style guides were characterized, compared to established HCI style guides, and evaluated against findings from HCI reviews of web paces and applications. Findings showed little consistency among the 21 HTML style guides assessed, with 75% of recommendations appearing in only one style guide. While there was some overlap, only 20% of HTML relevant recommendations from established style guides were found in HTML style guides. HTML style guides emphasized common look and feel, information display, and navigation issues with little mention of many issues prominent in established style guides such as help, message boxes and data entry. This difference is reinforced by other results showing that HTML style guides addressed concerns of web information content pages with much greater success than web-based applications. It is concluded that while the WWW represents a unique HCI environment, development of HTML style guides has been less rigorous, with issues associated with web-based applications largely ignored.

More Details

Vibration control for precision manufacturing using piezoelectric actuators

Martinez, D.R.

Piezoelectric actuators provide high frequency, force, and stiffness capabilities along with reasonable Stroke limits, all of which can be used to increase performance levels in precision manufacturing systems. This paper describes two examples of embedding piezoelectric actuators in structural components for vibration control. One example involves suppressing the self excited chatter phenomenon in the metal cutting process of a milling machine and the other involves damping vibrations induced by rigid body stepping of a photolithography platen. Finite element modeling and analyses are essential for locating and sizing the actuators and permit further simulation studies of the response of the dynamic system. Experimental results are given for embedding piezoelectric actuators in a cantilevered bar configuration, which was used as a surrogate machine tool structure. These results are incorporated into a previously developed milling process simulation and the effect of the control on the cutting process stability diagram is quantified. Experimental results are also given for embedding three piezoelectric actuators in a surrogate photolithography platen to suppress vibrations. These results demonstrate the potential benefit that can be realized by applying advances from the field of adaptive structures to problems in precision manufacturing.

More Details

Plasma chemistry dependent ECR etching of GaN

Shul, Randy J.

Electron cyclotron resonance (ECR) etching of GaN in Cl{sub 2}/H{sub 2}/Ar, C1{sub 2}/SF{sub 6}/Ar, BCl{sub 3}/H{sub 2}/Ar and BCl{sub 3}/SF{sub 6}/Ar plasmas is reported as a function of percent H{sub 2} and SF{sub 6}. GaN etch rates were found to be 2 to 3 times greater in Cl{sub 2}/H{sub 2}/Ar discharges than in BCl{sub 3}/H{sub 2}/Ar discharges independent of the H{sub 2} concentration. In both discharges, the etch rates decreased as the H{sub 2} concentration increased above 10%. When SF{sub 6} was substituted for H{sub 2}, the GaN etch rates in BCl{sub 3}-based plasmas were greater than those for the Cl{sub 2}-based discharges as the SF{sub 6} concentration increased. GaN etch rates were greater in Cl{sub 2}/H{sub 2}/Ar discharges as compared to Cl{sub 2}SF{sub 6}/Ar discharges whereas the opposite trend was observed for BCl{sub 3}-based discharges. Variations in surface morphology and near-surface stoichiometry due to plasma chemistries were also investigated using atomic force microscopy and Auger spectroscopy, respectively.

More Details

Investigation of a steam generator tube rupture sequence using VICTORIA

Bixler, Nathan E.

VICTORIA-92 is a mechanistic computer code for analyzing fission product behavior within the reactor coolant system (RCS) during a severe reactor accident. It provides detailed predictions of the release of radionuclides and nonradioactive materials from the core and transport of these materials within the RCS. The modeling accounts for the chemical and aerosol processes that affect radionuclide behavior. Coupling of detailed chemistry and aerosol packages is a unique feature of VICTORIA; it allows exploration of phenomena involving deposition, revaporization, and re-entrainment that cannot be resolved with other codes. The purpose of this work is to determine the attenuation of fission products in the RCS and on the secondary side of the steam generator in an accident initiated by a steam generator tube rupture (SGTR). As a class, bypass sequences have been identified in NUREG-1150 as being risk dominant for the Surry and Sequoyah pressurized water reactor (PWR) plants.

More Details
Results 96876–96900 of 100,993
Results 96876–96900 of 100,993
Top