Publications

Results 26–50 of 120

Search results

Jump to search filters

Predicting the counter-intuitive stress relaxation behavior of glass forming materials

Polymer

Kropka, Jamie M.; Long, Kevin N.

The ability to relax a macroscopically applied stress is often associated with molecular mobility, or the possibility for a molecule to move outside the confines of its current position, within the material of which the stress is applied. Here, a viscoelastic constitutive analysis is used to investigate the counter-intuitive experimental observation of “mobility decrease with increased deformation through yield” [1] for a glass forming polymer during stress relaxation while under compressive and tensile loading conditions. The behavior of an epoxy thermoset is examined using an extensively validated, thermorheologically simple, material “clock” model, the Simplified Potential Energy Clock (SPEC) model.[2] This methodology allows for a comparison between the linear viscoelastic (LVE) limit and the true non-linear viscoelastic (NLVE) representation and enables exploration of a wide range of conditions that are not practical to investigate experimentally. The model predicts the behavior previously described as “mobility decrease with increased deformation” in the LVE limit and at low strain rates for NLVE. Only when loading rates are sufficient to decrease the material shift factor by multiple orders of magnitude is the anticipated deformation induced mobility or “mobility increase with increased deformation” observed. While the model has not been “trained” for these behaviors, it also predicts that the normalized stress relaxation response is indistinguishable amongst strain levels in the “post-yield” region, as has been experimentally reported. At long time, which has not been examined experimentally, the model predicts that even the normalized relaxation curves that exhibit “mobility increase with increased deformation” “cross back over” and return to the LVE ordering. These findings demonstrate the ability of rheologically simple models to represent the counter-intuitive experimentally measured material response and present predictions at long time scales that could be tested experimentally.

More Details
TYPE Journal Article YEAR 2018
DOIOSTIScopus

Cure Schedule for Stycast 2651/Catalyst 11

Kropka, Jamie M.; McCoy, John D.

The Henkel technical data sheet (TDS) for Stycast 2651/Catalyst 11 lists three alternate cure schedules for the material, each of which would result in a different state of reaction and different material properties. Here, a cure schedule that attains full reaction of the material is defined. The use of this cure schedule will eliminate variance in material properties due to changes in the cure state of the material, and the cure schedule will serve as the method to make material prior to characterizing properties. The following recommendation was motivated by (1) a desire to cure at a single temperature for ease of manufacture and (2) a desire to keep the cure temperature low (to minimize residual stress build-up associated with the cooldown from the cure temperature to room temperature) without excessively limiting the cure reaction due to vitrification (i.e., material glass transition temperature, Tg, exceeding cure temperature).

More Details
TYPE Other Report YEAR 2017
DOIOSTIDOIOSTI

Cure Schedule for Stycast 2651/Catalyst 9

Kropka, Jamie M.; McCoy, John D.

The Emerson & Cuming technical data sheet (TDS) for Stycast 2651/Catalyst 9 lists three alternate cure schedules for the material, each of which would result in a different state of reaction and different material properties. Here, a cure schedule that attains full reaction of the material is defined. The use of this cure schedule will eliminate variance in material properties due to changes in the cure state of the material, and the cure schedule will serve as the method to make material prior to characterizing properties. The following recommendation uses one of the schedules within the TDS and adds a “post cure” to obtain full reaction.

More Details
TYPE Other Report YEAR 2017
DOIDOIOSTIOSTI

Predictive Modeling of Polymer Mechanical Behavior Coupled to Chemical Change/ Technique Development for Measuring Polymer Physical Aging

Kropka, Jamie M.; Stavig, Mark E.; Arechederra, Gabriel A.; McCoy, John D.

Develop an understanding of the evolution of glassy polymer mechanical response during aging and the mechanisms associated with that evolution. That understanding will be used to develop constitutive models to assess the impact of stress evolution in encapsulants on NW designs.

More Details
TYPE Other Report YEAR 2017
DOIOSTIDOIOSTI
Results 26–50 of 120
Results 26–50 of 120