A near net shape coating is desired to be applied to the outer surface of a capped cylinder (“cake pan”) type substrate using thermal spray technology. A capped cylinder geometry is more complex than simple coupon-level substrate substrates (e.g., flat panels, cylinders) and thus requires a more complex toolpath to deposit a uniform coating. This report documents a practical theoretical approach to calculating relative torch-to-substrate speeds for coating the cylindrical, corner, and cap region of a rotating capped cylinder based on fundamental thermal spray toolpath principles. A preliminary experimental test deposited a thermal spray coating onto a mock substrate using toolpath speeds calculated by the theoretical approach proposed. The mock substrate was metallographically inspected to assess coating uniformity across the cylindrical, corner, and cap region. Inspection of the mock substrate revealed qualitatively uniform coating microstructure and thickness where theoretically predicted, demonstrating the viability of the proposed toolpath method and associated calculations. Pathways forward to optimizing coating uniformity at the cap center are proposed as near term suggested future work.
The ability to integrate ceramics with other materials has been limited by the high temperature s (>800C) associated with ceramic processing. A novel process, known as aerosol deposition (AD), capable of preparing ceramic films at room temperature (RT) has been the subject of recent interest in the thermal spray and microelectronics communities. In this process, ceramic particles are accelerated using pressurized gas, impacted on a substrate and form a dense film under vacuum. This revolutionary process eliminates high temperature processing, enabling new coatings and microelectronic device integration as a back end of line process, in which ceramics can be deposited on metals, plastics, and glasses . Future impact s of this technology on Sandia's mission could include improved ceramic integration, miniaturized magnetic circulators in radar applications, new RF communication products, modification of commercial - off - the - shelf electronics, fabrication of conformal capacitors, thin batteries, glass - to - metal seals, and transparent electronics. Currently, optimization for RT solid - state deposition of ceramics is achieved empirically and fundamental mechanisms for ceramic particle - particle bonding are not well understood. Obtaining this knowledge will allow process - microstructure - property relation ship realization and will enable a differentiating ceramic integration capability. This LDRD leveraged Sandias existing equipment and capabilities in simulation, experimentation, and materials characterization to discover the fundamental mechanisms for ceramic particle deformation, particle - substrate bonding, and particle - particle bonding in RT consolidated films. RT deformation of individual Al2O3 particles was examined computationally and experimentally as a model system for understanding the complex dynamics associated with in vacuo RT deposition conditions associated with AD. Subsequently, particle - substrate bonding and particle - particle bonding in AD Al2O3 consolidated films were examined computationally and experimentally. Fundamental mechanisms behind the AD process were proposed.