The Chemistry Science Investigation: Dognapping Workshop was designed to (i) target and inspire fourth grade students to view themselves as Junior Scientists before their career decisions are solidified; (ii) enable hands-on experience in fundamental scientific concepts; (iii) increase public interaction with science, technology, engineering, and mathematical personnel by providing face-to-face opportunities; (iv) give teachers a pathway forward for scientific resources; (v) meet the New Mexico K–5 Science Benchmark Performance Standards; (vi) most importantly, ensure everyone has fun! For this workshop, the students are told they will be going to see a Chemistry Magic Show, but the performance is stopped when the Chemistry Dog is reportedly stolen. The students first clear their names using a series of interactive stations and then apply a number of science experiments to solve the mystery. This report describes the workshop in detail, which is suitable for large (~100 students per day) audiences but has flexibility to be modified for much smaller groups. An identical survey was given three times (before, immediately after, and 2 months after the workshop) to determine the impact on the students’ perception of science and scientists as well as determine the effectiveness in relaying scientific concepts through retention time. As a result, survey responses indicate that scientific information pertaining to the workshop is retained for up to 2 months.
We disclose a strategy for Ni-catalyzed dicarbofunctionalization of olefins in styrenes by intercepting Heck C(sp3)-NiX intermediates with arylzinc reagents. This approach utilizes a readily removable imine as a coordinating group that plays a dual role of intercepting oxidative addition species derived from aryl halides and triflates to promote Heck carbometalation and stabilizing the Heck C(sp3)-NiX intermediates as transient metallacycles to suppress β-hydride elimination and facilitate transmetalation/reductive elimination steps. This method affords diversely substituted 1,1,2-triarylethyl products that occur as structural motifs in various natural products.
The structural properties of reported inorganic scandium (Sc) salts were reviewed, including the halide (Cl, Br, and I), nitrate, sulfate, and phosphate salts. Additional analytical techniques used for characterization of these complexes (metrical data, FTIR and 45Sc NMR spectroscopy) were tabulated. A structural comparison of Sc to select lanthanide (La, Gd, Lu) salt complexes was briefly evaluated.
The synthesis of a series of lanthanide trifluoroacetic acid (H-TFA) derivatives which contain only the TFA and its conjugate acid has been developed. From the reaction of Ln(N(SiMe3)2)3 with an excess amount of H-TFA, the products were identified as: [Ln(μ-TFA)3(H-TFA)2]n (Ln = Y, Ce, Sm, Eu, Gd, Tb, Dy), [Ln(μ-TFA)3(μ-H-TFA)]n·solv (Ln·solv = Pr·2 H-TFA, H3O+, Ho·2py, Er·py, Yb·py, H-TFA), 3[H][(TFA)La(μ-TFA)3La(TFA)(μ-TFA)2(μc-TFA)2]n ½(H2O) ½(H2O, H-TFA) (La·½(H2O) ½(H2O, H-TFA)), [(k2-TFA)Nd(μ-TFA)3]n·H-py+ (Nd·H-py+), [(py)2Tm(μ-TFA)3]n (Tm), or [Lu(μ-TFA)4Lu(μ-TFA)3·H3O+]n (Lu·H3O+). Here, the majority of samples formed long chain polymers with 3 or 4 μ-TFA ligands. Tm was isolated with py coordinated to the metal, whereas Ho, Er, and Yb were isolated with py located within the lattice. Select samples from this set of compounds were used to generate nanomaterials under solvothermal (SOLVO) conditions using pyridine (py) or octylamine at 185 °C for 24 h. The SOLVO products were isolated as: (i) from py: La – fluocerite (LaF3, PDF 98-000-0214, R = 9.64%, 35(0) nm), Tb – terbium fluoride (TbF3, PDF 00-037-1487, R = 4.76%, 21(2) nm), Lu lutetium oxy fluoride (LuOF, PDF 00-052-0779, R = 8.24%, 8(2) nm); (ii) from octylamine: La – fluocerite/lanthanum oxide carbonate (LaF3, PDF 98-000-0214, R = 7.47%, 5(0) nm; La2O2(CO3), PDF 01-070-5539, R = 12.32%, 12(0) nm), Tb – terbium oxy fluoride (TbOF, PDF 00-008-0230, R = 7.01%, 5(0) nm); Lu – lutetium oxide (Lu2O3, PDF 00-012-0728, R = 6.52%, 6(1) nm).
A series of alkali metal yttrium neo-pentoxide ([AY(ONep)4]) compounds were developed as precursors to alkali yttrium oxide (AYO2) nanomaterials. The reaction of yttrium amide ([Y(NR2)3] where R=Si(CH3)3) with four equivalents of H-ONep followed by addition of [A(NR2)] (A=Li, Na, K) or Ao (Ao=Rb, Cs) led to the formation of a complex series of AnY(ONep)3+n species, crystallographically identified as [Y2Li3(μ3-ONep)(μ3-HONep)(μ-ONep)5(ONep)3(HONep)2] (1), [YNa2(μ3-ONep)4(ONep)]2 (2), {[Y2K3(μ3-ONep)3(μ-ONep)4(ONep)2(ηξ-tol)2][Y4K2(μ4-O)(μ3-ONep)8(ONep)4]•ηx-tol]} (3), [Y4K2(μ4-O)(μ3-ONep)8(ONep)4] (3 a), [Y2Rb3(μ4-ONep)3(μ-ONep)6] (4), and [Y2Cs4(μ6-O)(μ3-ONep)6(μ3-HONep)2(ONep)2(ηx-tol)4]•tol (5). Compounds 1–5 were investigated as single source precursors to AYOx nanomaterials following solvothermal routes (pyridine, 185 oC for 24 h). The final products after thermal processing were found by powder X-ray diffraction experiments to be Y2O3 with variable sized particles based on transmission electron diffraction. Energy dispersive X-ray spectroscopy studies indicated that the heavier alkali metal species were present in the isolated nanomaterials.
The electroreduction of Er3+ in propylene carbonate, N,N-dimethylformamide, or a variety of quaternary ammonium ionic liquids (ILs) was investigated using [Er(OTf)3] and [Er(NTf2)3]. Systematic variation of the ILs' cation and anion, Er3+ salt, and electrode material revealed a disparity in electrochemical interactions not previously seen. For most ILs at a platinum electrode, cyclic voltammetry exhibits irreversible interactions between Er3+ salts and the electrode at potentials significantly less than the theoretical reduction potential for Er3+. Throughout all solvent-salt systems tested, a deposit could be formed on the electrode, though obtaining a high purity, crystalline Er0 deposit is challenging due to the extreme reactivity of the deposit and resulting chemical interactions, often resulting in the formation of a complex, amorphous solid-electrolyte interface that slowed deposition rates. Comparison of platinum, gold, nickel, and glassy carbon (GC) working electrodes revealed oxidation processes unique to the platinum surface. While no appreciable reduction current was observed on GC at the potentials investigated, deposits were seen on platinum, gold, and nickel electrodes.
The structural properties of a series of scandium inorganic acid derivatives were determined. The reaction of Sc0 with concentrated aqueous hydrochloric acid led to the isolation of [(H2O)5Sc(Μ-OH)]24Cl·2H2O (1). Compound 1 was modified with a series of inorganic acids (i.e., HNO3, H3PO4, and H2SO4) at room temperature and found to form {[(H2O)4Sc(k2-NO3)(Μ-OH)]NO3}2 (2a), [(H2O)4Sc(k2-NO3)2]NO3·H2O (2b) (at reflux temperatures), {6[H][Sc(Μ-PO4)(PO4)]6}n (3), and [H][Sc(Μ3-SO4)2]·2H2O (4a). Additional organosulfonic acid derivatives were investigated, including tosylic acid (H-OTs) to yield {[(H2O)4Sc(OTs)2]OTs}·2H2O (4b) in H2O and [(DMSO)3Sc(OTs)3] (4c) in dimethyl sulfoxide and triflic acid (H-OTf) to form [Sc(H2O)8]OTf3 (4d). Other organic acid modifications of 1 were also investigated, and the final structures were determined to be {([(H2O)2Sc(Μ-OAc)2]Cl)6}n (5) from acetic acid (H-OAc) and [Sc(Μ-TFA)3Sc(Μ-TFA)3]n (6) from trifluoroacetic acid (H-TFA). In addition to single-crystal X-ray structures, the compounds were identified by solid-state and solution-state 45Sc nuclear magnetic resonance spectroscopic studies.
This report addresses recent developments concerning the identification and handling of potential peroxide forming (PPF) and peroxide yielded derivative (PYD) chemicals. PPF chemicals are described in terms of labeling, shelf lives, and safe handling requirements as required at SNL. The general peroxide chemistry concerning formation, prevention, and identification is cursorily presented to give some perspective to the generation of peroxides. The procedure for determining peroxide concentrations and the proper disposal methods established by the Hazardous Waste Handling Facility are also provided. Techniques such as neutralization and dilution are provided for the safe handling of any PYD chemicals to allow for safe handling. The appendices are a collection of all available SNL documentation pertaining to PPF/PYD chemicals to serve as a single reference.