Publications

Results 100251–100275 of 100,993

Search results

Jump to search filters

Plasma facing materials

Nuclear Fusion

Gauster, Wilhelm B.

The paper reviews the interaction of plasmas with materials and presents a status summary based on experience in large fusion experiments, laboratory investigations and design studies. The phenomena that are discussed limit the power densities and confinement properties attainable in plasmas; their control is an essential element of the design of future fusion devices. © 1990 IOP Publishing Ltd.

More Details

Controlled microstructure oxide coatings for chemical sensors

Technical Digest, 1990 Solid-State Sensor and Actuator Workshop

Frye, G.C.; Brinker, C.J.; Ashley, C.S.; Martinez, S.L.; Bein, T.

The use of porous oxide coatings, formed using sol-gel chemistry routes, as the discriminating elements of acoustic wave (AW) chemical sensors, is investigated. These coatings provide several unique advantages: durability, high adsorption capacity based on large surface areas, and chemical selectivity based on both molecular size and chemical interactions. The porosity of these coatings is determined by performing nitrogen adsorption isotherms using the AW device response to monitor the uptake of nitrogen at 77 K. The chemical sensitivity and selectivity obtained with this class of coatings is demonstrated using several examples: hydrous titanate ion exchange coatings, zeolite/silicate microcomposite coatings, and surface modified silicate films.

More Details

Volumetric light source theory

Walko, R.J.

In light sources such as tungsten filament bulbs, fluorescent tubes and gas tube type radioluminescent (RL) lamps, visible light is emitted from a thin surface layer of excited material. In contrast, neon bulbs, xenon flash tubes and lasers emit light generated throughout their volumes. The first group can be characterized as surface emitters and the latter as volumetric emitters. Theoretically, an ideal volumetric light source has definite advantages over a surface source. In reality, practical volumetric sources will have limitations as well. These advantages and limitations will be discussed with particular emphasis on comparisons between current gas tube type RL lamps and the more advanced volumetric RL lamps.

More Details

Chemical Reactions During the Thermal Processing of Borazene Polymers

Journal of the American Ceramic Society

Rye, Robert R.

A class of borazene polymers was developed which consists of a two‐dimensional array of six‐membered borazene rings with the borons of adjacent borazene rings separated by ‐NH‐ groups. Pyrolysis of these polymers above ∼1000°C leads to crystalline graphite‐like boron nitride (h‐BN). The thermal chemistry of thin films of one polymer deposited on KOH‐eched aluminum was examined by thermal decomposition mass spectroscopy (TDMS) and thermal gravimetric analysis (TGA), and the gas evolution chemistry was found to be essentially complete at temperatures less than 400°C. All products desorb with the same temperature profile and the major desorbing species are NH3 and N2, consistent with a loss of excess nitrogen and hydrogen in the polymer, and HCl from decomposition of byproducts of the synthesis step. Since the formation of ordered crystalline h‐BN films requires heating to temperatures of the order of 1000°C, whereas the gas evolution chemistry is complete by roughly 400°C, it is concluded that gas evolution chemical processes are not rate limiting in BN ceramic production. Copyright © 1990, Wiley Blackwell. All rights reserved

More Details

Development of the sodium/sulfur technology for energy storage

Magnani, N.J.

The US Department of Energy (DOE) has supported the development of the sodium-sulfur technology since 1973. The programs have focused on progressing core aspects of the technology and completing initial battery engineering for both mobile and stationary applications. An overview of the Office of Energy Management (OEM) activities is contained in this paper. Two major development programs have been active: the first with Ford Aerospace and Communications Corporation (1975 to 1985), and the second with Chloride Silent Power Limited (1985 to 1990). With the completion this year of the qualification of a cell suitable for initial Solar Energy Systems (SES) applications, the emphasis of future DOE/OEM sodium/sulfur programs will shift to SES-battery engineering and development. The initial effort will resolve a number of issues related to the feasibility of utilizing the sodium/sulfur technology in these large-scale applications. This multi-year activity will represent the initial phase of an integrated long-term DOE-supported program to produce a commercially viable battery system.

More Details

Data and conclusions from tests on small screws

Cawlfield, J.L.; Ernest, T.L.; Reese, R.T.

The integrity of many mechanical assemblies and electrical components depends on small threaded fasteners. The design standards for small (less than {1/4} inch in diameter) screws made of stainless steel are not as well developed as those for larger sizes of high strength steels. The typical design approach is based on the application of static design principals. Steady state accelerations are applied to the component or assembly and sufficient screws are installed in mounting hardware for attachment to the next assembly. These design principals have been used successfully for years in a wide variety of applications. As the parts requiring small screws have continued to decrease in size, some design requirements include greater thread depths and adherence to strict interpretation of the governing thread standards. These design requirements have their origins in the lack of adequate definitions and standards for designs using small threaded fasteners. These design practices have led to significant problems in manufacturing parts with small threaded fasteners by requiring thread depths to four and more diameters of engagement while maintaining thread heights (radial engagement) of 75 percent throughout the thread interfaces. A test program was developed to address questions regarding design and manufacturing issues involving small threaded fasteners which included tensile strength, length of engagement needed to achieve the full strengths of the screws, and verification of the static design principals in dynamic conditions. This paper summarizes the initial results obtained to date from this test program and describes the work-in-progress on the dynamic tests with their related static tests. 2 refs., 4 figs., 4 tabs.

More Details

A continuum damage model for the quasi-static response of brittle materials

Chen, Er-Ping

An isotropic continuum damage theory which accounts for the degradation of material strength under quasi-static loading conditions has been developed in the present investigation. The damage mechanism in this theory has been selected to be the interaction and growth of subscale cracks. The development of the theory follows closely the strain-rate dependent dynamic model advanced by the first author and his coworkers. Briefly, the cracks are activated by the maximum principal tensile strain and the density of activated cracks is described by a Weibull statistical distribution. The moduli of a cracked solid derived by Budiansky and O'Connell are then used to represent the global material degradation due to subscale cracking. Two additional material constants have been introduced in this model. These constants are determined from uniaxial tensile test data. The model has been implemented into a finite element code. Sample calculations involving the uniaxial and biaxial responses of plain concrete panels are presented to demonstrate the utility of the model. 7 refs., 2 figs.

More Details

Experimental evaluation of chemical cleaning processes for high-lifetime silicon processing

King, David L.

The first in a series of multi-factor experiments designed to optimize the chemical cleaning procedure for four types of silicon material used in solar cell fabrication has been completed. The goal of this first experiment (a twenty-two factor main-effects experiment) was to determine the factors associated with chemical cleaning procedures that are most important in obtaining high excess charge-carrier recombination lifetime following a high-temperature furnace oxidation. It was determined that the factors having the strongest influence on charge-carrier lifetime were different for the four different silicon materials considered. In general, the lower the lifetime of the material, the less sensitive the material was to different chemical cleaning steps. The stability of the lifetime was also evaluated with several factors exhibiting a significant effect for high-quality silicon. Chemical cleaning procedures were identified that resulted in stable post-oxidation lifetimes greater than 2 ms for high-resistivity float-zone silicon. 3 refs., 8 figs.

More Details

Comparison of calculations and in situ results for a large, heated test room at the Waste Isolation Pilot Plant (WIPP)*

31st U.S. Symposium on Rock Mechanics, USRMS 1990

Munson, Darrell E.

The closure measurements from a large scale, heated, in situ experimental room in salt are compared to numerical calculations using the most recent predictive technology, with very good agreement, limited potentially only by the unmodeled roof fracture and separation.

More Details

Insulations for metallic glasses in pulse power systems

Turman, B.N.

Insulations are used in metallic glass ribbon cores in pulse power applications to prevent interlaminar eddy currents due to voltages induced between adjacent laminations. These interlaminar eddy currents can greatly increase the losses in cores, and, thereby, decrease the pulse permeability at high magnetization rates. This paper reports results of experiments with various insulation materials and both low and high induced anisotropy energy iron-base metallic glass ribbons. Co-wound insulation films as well as conformal insulations were investigated. Magnetic properties and voltage hold-off strengths are reported. 11 refs., 11 figs., 5 tabs.

More Details

Minimizing frequency pulling of quartz oscillators due to power supply variations

Wessendorf, Kurt O.

When quartz controlled oscillators are required for use in applications demanding precision many factors will ultimately place limitations on the ability of the oscillator to remain at the desired frequency. These factors include temperature, resonator Q, pullability, radiation, output load variability, and the electronic components. This paper addresses the subject of frequency instability of oscillator circuits due to power supply voltage variations. In particular, the primary sources of this instability are described for a Pierce oscillator employing a bipolar transistor and design techniques are presented which minimize these frequency pulling effects. 4 refs., 17 figs.

More Details

Three-dimensional structural analyses of reentry vehicles

Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference

Gwinn, Kenneth W.

The three-dimensional structural analysis of reentry vehicles presents a considerable challenge to the analyst. This is due to the mechanics of the problem as well as the incorporation of results from several disciplines into the environmental description of the problem. Separate results from aero-analyses, frequently computed in one-dimensional format must be combined into a three-dimensional format suitable for a structural finite element analysis. Features required for the analysis include the ablated thickness of the heatshield structure, as well as pressure on the vehicle and the temperature distribution through the heatshield. By combining these environments, a complete description of all factors which affect the structural performance of reentry vehicles are included into one analysis. This paper presents a method of analyzing the structural response of reentry vehicles using the complete three-dimensional environmental load description.

More Details

Reflection mass spectrometry (REMS) during III/V MBE

Tsao, Jeffrey Y.

Reflection Mass Spectrometry (REMS) consists of a cryo-shrouded mass spectrometer which measures mass-analyzed, line-of-sight chemical fluxes from a growing wafer. It is especially useful during III/V molecular beam epitaxy (MBE) for which there are always substantial group V fluxes and often some group III fluxes leaving the wafer during growth. These fluxes depend sensitively on the instantaneous chemical reactivity of the surface. That chemical reactivity in turn depends on instantaneous alloy composition (III/III ratio), surface stoichiometry (As coverage) and temperature. In this brief summary of our work, we describe two examples of the engineering'' usefulness of REMS, involving MBE of InAlAs and InGaAs and one example of measurements of basic scientific interest. 3 figs.

More Details

Measuring flow properties of wicks for heat pipe solar receivers

Adkins, Douglas R.

A program is under way to develop liquid metal heat pipes that can transfer energy from the focal point of a parabolic solar concentrator to the heater tubes of one or more Stirling engines. To design high performance wicks for heat pipe solar receivers, it is necessary to have an accurate assessment of the wick's properties. Procedures for measuring the flow properties of wicks before and after fabrication processes take place are presented. The testing procedures provide a useful method of determining the validity of a wick design before full-scale testing is attempted.

More Details

Recent progress in photovoltaic concentrator module technology

Richards, Elizabeth H.

Significant progress is continuing in the development of photovoltaic (PV) concentrator technology. New record cell and module efficiencies have been achieved, and improvements in cells, cell assemblies, and modules are increasing reliability and decreasing cost. The number of firms actively pursuing PV concentrator module technology has increased substantially in the last three years. Two new concentrator systems were installed last year, and we are likely to see more in the near future. This paper describes the most significant developments of the last two years, including descriptions of PV concentrator module development and reliability activities, advances in concentrator cell technology, the new PV concentrator array installations, a new Concentrator Initiative Program, and results of the latest costing study. 26 refs., 9 figs., 1 tab.

More Details

Petroleum storage potential of the Chacahoula salt dome, Louisiana

Neal, J.T.

Chacahoula salt dome, eight miles southwest of Thibodaux, LA, could be solution mined to create caverns for storing as much as 500 million barrels (MMB) of crude oil, should the Strategic Petroleum Reserve (SPR) require additional storage volume. The salt mass geometry is confirmed by more than 50 oil wells, and also from previous exploratory drilling for sulphur. Top of salt occurs at {minus}1100 ft, and some 1300 acres exist within the {minus}2000 ft salt contour. Frasch mining of 1.35 million long tons of sulphur caused the surface to subside about one foot on the northeastern part of the dome. Creep-induced subsidence averaging {approximately}2.7 ft over 30 yrs is estimated for a 200 MMB cavern array, which would require perimeter diking to control localized perennial flooding. Earthquakes approaching intensity MM 6 have occurred nearby and are expected to recur on the order of {approximately}100 yrs but would not affect cavern stability. Additional study of brine disposal methods and hurricane surge probabilities are needed to establish design parameters and cost estimates for storage. 11 refs., 8 figs., 2 tabs.

More Details

A Nuisance Alarm Data System for evaluation of intrusion detectors

Ream, W.K.

A Nuisance Alarm Data System (NADS) was developed to gather long- term background alarm data on exterior intrusion detectors as part of their evaluation. Since nuisance alarms play an important part in the selection of intrusion detectors for use at Department of Energy (DOE) facilities, an economical and reliable way to monitor and record there alarms was needed. NADS consists of an IBM Personal Computer and printer along with other commercial units to communicate with detectors, to gather weather data and to record video for assessment. Each alarm, its assessment and the weather conditions occurring at alarm time are placed into a database that is used in the evaluation of the detector. The operating software is written in Turbo Pascal for easy maintenance and modification. A portable system, based on the NADS design, has been built and shipped to other DOE locations to do on-site alarm monitoring. This has been valuable for the comparison of different detectors in the on-site environment and for testing new detectors when the appropriate conditions do not exist or cannot be simulated at the Exterior Intrusion Detection Testbed.

More Details

Evaluation of thermal cycling creep-fatigue damage for a molten salt receiver

undefined

Grossman, James W.

A molten salt cavity receiver was solar tested at Sandia National Laboratories during a year-long test program. Upon completion of testing, an analysis was performed to determine the effect of thermal cycling on the receiver. The results indicate substantial fatigue damage accumulation for the receiver when the relatively short test time is considered. This paper describes the methodology used to analyze the cycling, the results, and how they affect future receiver design. The test receiver was configured as a C-shaped cavity with eight multipass heat absorption panels. The tubes were Alloy 800. The heat exchange medium was a molten nitrate salt mixture (60% sodium nitrate, 40% potassium nitrate by weight). The operating temperature range was from 288°C to 566°C.

More Details

Combining acoustic emission locations and a microcrack damage model to study development of damage in brittle materials

31st U.S. Symposium on Rock Mechanics, USRMS 1990

Holcomb, David J.

Under compressive stresses, brittle polycrystalline materials fail as the result of the growth, interaction and coalesence of microcracks. To predict the deformation of damaging material, constitutive laws developed for such materials must incorporate the effects of crack size, density, orientation, and interaction.A method of incorporating the accumulation and growth of microcracks into a continuum model is to use a measure of microcrack growth and interaction defined as damage. Although a number of damage theories have been proposed, there is no generally accepted experimental technique for detecting and measuring damage. Acoustic emissions (AE) have been correlated with microcrack nucleation and growth. We propose that AE locations and density are useful measures of damage that can be correlated with calculated damage. Our approach is to use acoustic emissions (AE) and computer modeling to study the development of damage in geomaterials.

More Details

Suboptimal strong stabilization using fixed-order dynamic compensation

Proceedings of the American Control Conference

Jacobus, M.J.

Consideration is given to the problem of stabilizing a plant using a suboptimal stable compensator of fixed order. The resulting equations are a modified form of the optimal projection equations, with the separation principle not holding in either the full- or reduced-order case. An overbounding technique on the state covariance guarantees that the compensator is stable if nonnegative definite solutions exist to the design equations.

More Details

Standardizing complexity characteristics in Function Points: A process improvement

Schofield, Joseph R.

The Function Point (FP) concept was introduced to define'' a measure for applications development and maintenance functions avoiding the problems inherent in productivity measures in the late 1970s. At that time, Albrecht outlines three essentials elements for software size measurement: the measure must be technology independent; the technique must measure all the application functions delivered to the end customer; and the technique must measure only the application functions as delivered. Using these three attributes of a measurement, further concentrated analysis could be performed for languages, technologies, methodologies, and tools. The characterization of systems and the quality of the product are motives for subscribing to FPs. Since the inception of FPs, attempts have been made to improve the process of quantifying FPs. Some of these attempts have strayed from the intended use of FPs and have diverted valuable energy away from consistent application. The purpose of this article is to describe the process and the quantification of complexity factors for each of the five Unadjusted FPs. 4 refs.

More Details

Impedance characteristics of terawatt ion diodes

Mendel Jr., C.W.; Desjarlais, M.P.; Pointon, T.D.; Seidel, D.B.; Slutz, S.A.

Light ion fusion research has developed ion diodes that have unique properties when compared to other ion diodes. These diodes involve relativistic electrons, ion beam stagnation pressures that compress the magnetic field to the order of 10 Tesla, and large space-charge and particle current effects throughout the accelerating region. These diodes have required new theories and models to account for effects that previously were unimportant. One of the most important effects of the magnetic field compression and large space-charge has been impedance collapse. The impedance collapse can lead to poor energy transfer efficiency, beam debunching, and rapid change of the beam focus. This paper discusses our current understanding of these effects, some of the methods we are using to ameliorate them, and the future directions our theory and modeling will take. 40 refs., 6 figs.

More Details

A new technique for imaging the logic state of passivated conductors: Biased resistive contrast imaging

Cole Jr., E.I.

A new scanning electron microscopy imaging technique has been developed to examine the logic state of conductors on passivated CMOS integrated circuits. This technique employs a modified Resistive Contrast Imaging system to acquire image data on powered devices. The image is generated by monitoring subtle shifts in the power supply current of an integrated circuit as an electron beam is scanned over the device surface. The images produced with this new technique resemble voltage contrast data from devices with the passivation removed and the surface topography subtracted. Non-destructive applications of this imaging method to functional and failed integrated circuits are described. Possible irradiation effects and methods to minimize them are also discussed. 2 refs., 1 fig.

More Details
Results 100251–100275 of 100,993
Results 100251–100275 of 100,993
Top