Current classified document management systems require a tremendous amount of space and extensive manpower to account for, inventory, and protect the documents. Comprehensive analysis of current control and accountability procedures reveal the main problem is the actual handling of the paper itself. The purpose of the Networked Microsoft Windows 3.1 based Classified Document Control System (CDOCS) is to eliminate the paper by scanning and storing images of pages on a personal computer using {open_quotes}write once read mostly{close_quotes} (WORM) high density optical media. By saving images on the computer, not only can manpower and space requirements be reduced, but the chance of compromise is diminished. As an added benefit, the information is now more readily available to the authorized user and is provided to the user at the user`s PC. The network target for CDOCS is Microsoft Windows for Workgroups. Thus, the system is also readily applicable to unclassified document imaging uses.
Information system requirements that are expressed as simple English sentences provide a clear understanding of what is needed between system specifiers, administrators, users, and developers of information systems. The approach used to develop the requirements is the Natural-language Information Analysis Methodology (NIAM). NIAM allows the processes, events, and business rules to be modeled using natural language. The natural language presentation enables the people who deal with the business issues that are to be supported by the information system to describe exactly the system requirements that designers and developers will implement. Computer prattle is completely eliminated from the requirements discussion. An example is presented that is based upon a section of a DOE Order involving nuclear materials management. Where possible, the section is analyzed to specify the process(es) to be done, the event(s) that start the process, and the business rules that are to be followed during the process. Examples, including constraints, are developed. The presentation steps through the modeling process and shows where the section of the DOE Order needs clarification, extensions or interpretations that could provide a more complete and accurate specification.
Transparent and secure process monitoring systems may become an important tool in the dismantlement schemes in support of bilateral and multi-lateral treaties. A prototype system, using public key cryptography to authenticate compliance data, has been developed by Sandia National Laboratories. The Authenticated In-plant Process Monitor (AIPM) is an embedded process monitoring system capable of accepting up to sixteen industry standard process variables, at sample rates of up to two samples per second. Each AIPM will synchronously sample the process, authenticate, and transmit the data in real-time to the host receiving station. The receiving station will validate the compliance data and then display in real-time while updating a relational database. This new generation of monitoring systems must include protection from a host of possible threat scenarios while providing the user authentic clear text data. Data threats are controlled by the use of a public key Treaty Data Authentication Module (TDAM) utilizing the National Institute of Standards and Technology (NIST) Digital Signature Standard. System threats are minimized by the use of a tamper indicating enclosure that monitors unauthorized entry and environmental attacks. Insider threats will be controlled by the use of an authenticated bi-directional communication link between each remote AIPM and the host receiving station. This security envelope will be monitored on a real-time basis with appropriate action taken if an attack occurs. The employment of these security features allows the inspectorate to distribute unprocessed clear text data and an attached digital signature with confidence that the data cannot be forged.
Information Surety is the enhancement of the confidentiality, integrity, and availability of information and software systems. It is attained through sequential steps: identification of software reliability requirements and information protection needs, designing for a balanced level of risk throughout the system, and application of appropriate software and hardware technologies and procedures. The ability to apply these steps when developing systems is impaired by a general lack of understanding of surety issues by system developers, and by the fact that there are many separate areas of knowledge involved that are not currently integrated into a disciplined approach (e.g., risk assessment, information access control in computers and networks, secure messaging, trusted software development). Our best systems today are achieved by clever designers who use ad-hoc methods. In the absence of good development tools, technologies may be applied haphazardly and/or retrofitted, without yielding balanced protection. This paper will take the audience through an exploration of the elements of information surety, some common misconceptions about information surety today, and the even greater challenges on the horizon. It will end with some suggestions for research areas which will help evolve the discipline of information surety.
Sandia National Laboratories has considerable experience with monochrome video monitors used in alarm assessment video systems. Most of these systems, used for perimeter protection, were designed to classify rather than to identify intruders. There is a growing interest in the identification function of security video systems for both access control and insider protection. Because color video technology is rapidly changing and because color information is useful for identification purposes, Sandia National Laboratories established a program to evaluate the newest relevant color video equipment. This report documents the evaluation of an integral component, color monitors. It briefly discusses a critical parameter, dynamic range, details test procedures, and evaluates the results.
International Atomic Energy Agency (IAEA) inspectors must maintain continuity of knowledge on all safeguard samples and, in particular, on those samples drawn from plutonium product and spent fuel input tanks at a nuclear reprocessing plant`s blister sampling station. Integrity of safeguard samples must be guaranteed from the sampling point to the moment of sample analysis at an accepted local laboratory or at the IAEA`s Safeguards Analytical Laboratory (SAL) in Seibersdorf, Austria. The safeguard samples are drawn at a blister sampling station with inspector participation and then transferred via a pneumatic post system to the facility`s analytical laboratory. Transfer of the sample by the pneumatic post system, arrival of the sample in the operator`s analytical laboratory, and storage of the sample awaiting analysis are very time consuming activities for an inspector, particularly if continuous human surveillance is required for all these activities. These activities could be observed by ordinary surveillance methods, such as a video monitoring system, but this would be cumbersome and time consuming for both the inspector and the operator. This paper describes a secure container designed to assure sample vial integrity from the point the sample is drawn to treatment of the sample at a facility`s analytical laboratory.
The progress made in advanced packaging development at Sandia National Laboratories for integration of III-V photonic devices and CMOS IC`s on Silicon MCM substrates for planar aid stacked applications will be reported. Studies to characterize precision alignment techniques using solder attach materials compatible with both silicon IC`s and III-V devices will be discussed. Examples of the use of back-side alignment and IR through-wafer inspection will be shown along with the extra processing steps that are used. Under bump metallurgy considerations are also addressed.
A simplified explanation for gas flow instability in parallel heated channels is presented with specific applications to channels containing packed beds of power-producing particles. The explanation captures the basic governing physics of the viscosity-driven instability and hopefully removes some of the misconceptions surrounding this issue. Simple illustrative calculations, steady-state and transient, using the SAFSIM computer program are included in the explanation. The explanation points out that flow instability is common to any and all gas flow systems with parallel heated channels, that the addition of flow resistance to the entrance of a channel mitigates flow instability, and that instabilities do not occur instantaneously.
The design of a magnetically suspended six degree of freedom positioning system capable of nanometer positioning is presented. The sample holder is controlled in six degrees of freedom (DOF) over 300 micrometers of travel in X, Y and Z directions. A design and control summary, and test results indicating stability and power dissipation are included in the paper. The system is vacuum compatible, uses commercially available materials, and requires minimal assembly and setup.
Concepts for underground panel or drift seals at the Waste Isolation Pilot Plant are developed to satisfy sealing requirements of the operational period. The concepts are divided into two groups. In the ``NOW`` group, design concepts are considered in which a sleeve structure is installed in the panel access immediately after excavation and before waste is emplaced. In the ``LATER`` group, no special measures are taken during excavation or before waste emplacement; the seal is installed at a later date, perhaps up to 35 years after the drift is excavated. Three concepts are presented in both the NOW and LATER groups. A rigid sleeve, a yielding sleeve, and steel rings with inflatable tubes are proposed as NOW concepts. One steel ring concept and two concrete monoliths are proposed for seals emplaced in older drifts. Advantages and disadvantages are listed for each concept. Based on the available information, it appears most feasible to recommend a LATER concept using a concrete monolith as a preferred seal for the operational period. Each concept includes the potential of remedial grout and/or construction of a chamber that could be used for monitoring leakage from a closed panel during the operational period. Supporting in situ demonstrations of elements of the concepts are recommended.
An investigation of the shock compression and release properties of silicon carbide ceramic has been performed. A series of planar impact experiments has been completed in which stationary target discs of ceramic were struck by plates of either similar ceramic or other appropriate material at velocities up to 2.2 km/s with a propellant gun facility. The particle velocity history at the interface between the back of the target ceramic and a lithium-fluoride window material was measured with laser velocity interferometry (VISAR). Impact stresses achieved in these experiments range between about 10 and 50 GPa. Numerical solutions and analytic methods were used to determine the dynamic compression and release stress-strain behavior of the ceramic. Further analysis of the data was performed to determine dynamic strength and compressibility properties of silicon carbide.
Muir, J.F.; Hogan Jr., R.E.; Skocypec, R.D.; Buck, R.
A joint US/Federal Republic of Germany (FRG) project has successfully tested a unique solar-driven chemical reactor in the CAtalytically Enhanced Solar Absorption Receiver (CAESAR) experiment. The CAESAR test was a {open_quotes}proof-of-concept{close_quotes} demonstration of carbon-dioxide reforming of methane in a commercial-scale, solar, volumetric receiver/reactor on a parabolic dish concentrator. The CAESAR design; test facility and instrumentation; thermal and chemical tests; and analysis of test results are presented in detail. Numerical models for the absorber and the receiver are developed and predicted performance is compared with test data. Post test analyses to assess the structural condition of the absorber and the effectiveness of the rhodium catalyst are presented. Unresolved technical issues are identified and future development efforts are recommended.
This report describes work performed at Sandia under a CRADA with Shell Development of Houston, Texas aimed at developing hydrous metal oxide (HMO) catalysts for oxidation of hydrocarbons. Autoxidation as well as selective oxidation of 1-octene was studied in the presence of HMO catalysts based on known oxidation catalysts. The desired reactions were the conversion of olefin to epoxides, alcohols, and ketones, HMOs seem to inhibit autoxidation reactions, perhaps by reacting with peroxides or radicals. Attempts to use HMOs and metal loaded HMOs as epoxidation catalysts were unsuccessful, although their utility for this reaction was not entirely ruled out. Likewise, alcohol formation from olefins in the presence of HMO catalysts was not achieved. However, this work led to the discovery that acidified HMOs can lead to carbocation reactions of hydrocarbons such as cracking. An HMO catalyst containing Rh and Cu that promotes the reaction of {alpha}-olefins with oxygen to form methyl ketones was identified. Although the activity of the catalyst is relatively low and isomerization reactions of the olefin simultaneously occur, results indicate that these problems may be addressed by eliminating mass transfer limitations. Other suggestions for improving the catalyst are also made. 57 refs.
A mission hazard assessment has been performed for the Strategic Target System Mission 1 (known as STARS M1) for hazards due to potential debris impact in the Marshall Islands area. The work was performed at Sandia National Laboratories as a result of discussion with Kwajalein Missile Range (KMR) safety officers. The STARS M1 rocket will be launched from the Kauai Test Facility (KTF), Hawaii, and deliver two payloads to within the viewing range of sensors located on the Kwajalein Atoll. The purpose of this work has been to estimate upper bounds for expected casualty rates and impact probability or the Marshall Islands areas which adjoin the STARS M1 instantaneous impact point (IIP) trace. This report documents the methodology and results of the analysis.
This Fire Hazards Analysis is sponsored by Plant Engineering and is prepared to support the Safety Assessment for the CNSAC Facility. This is a preliminary fire hazards analysis of a yet to be constructed facility and is based upon the current building design and the current understanding of the potential occupancy hazards. The governing occupancy for this building is personnel offices. The CNSAC facility will be dedicated primarily to two activities: (1) arms control and verification technology and (2) intelligence. This report supplements the Safety Assessment for the CNSAC facility and follows the guidance of DOE Memorandum EH-31.3 and meets the objectives of paragraph 4 of DOE Order 5480.7A, ``Fire Protection.`` This analysis demonstrates that under ``worst case`` assumptions a fire in the CNSAC facility will result in consequences which are below DOE offsite guidelines for accident conditions. This report is based upon preliminary design information and any major changes to the building design may require additional analyses.
The Salado Two-Phase Flow Laboratory Program was established to address concerns regarding two-phase flow properties and to provide WIPP-specific, geologically consistent experimental data to develop more appropriate correlations for Salado rock to replace those currently used in Performance Assessment models. Researchers in Sandia`s Fluid Flow and Transport Department originally identified and emphasized the need for laboratory measurements of Salado threshold pressure and relative permeability. The program expanded to include the measurement of capillary pressure, rock compressibility, porosity, and intrinsic permeability and the assessment of core damage. Sensitivity analyses identified the anhydrite interbed layers as the most likely path for the dissipation of waste-generated gas from waste-storage rooms because of their relatively high permeability. Due to this the program will initially focus on the anhydrite interbed material. The program may expand to include similar rock and flow measurements on other WIPP materials including impure halite, pure halite, and backfill and seal materials. This conceptual plan presents the scope, objectives, and historical documentation of the development of the Salado Two-Phase Flow Program through January 1993. Potential laboratory techniques for assessing core damage and measuring porosity, rock compressibility, capillary and threshold pressure, permeability as a function of stress, and relative permeability are discussed. Details of actual test designs, test procedures, and data analysis are not included in this report, but will be included in the Salado Two-Phase Flow Laboratory Program Test Plan pending the results of experimental and other scoping activities in FY93.
Sandia National Laboratories maintains several libraries of equation of state tables, in a modified Sesame format, for use in hydrocode calculations and other applications. This report discusses one of those libraries, the seslan file, which contains 78 tables from the Los Alamos equation of state library. Minor changes have been made to these tables, making them more convenient for code users and reducing numerical difficulties that occasionally arise in hydrocode calculations.
The ANSI/ANS 8.1 criticality safety standard recommends validation and benchmarking of the calculational methods used in evaluating criticality safety limits for away-from-reactor applications. The lack of critical experiments with burned light-water reactor (LWR) fuel in racks or in casks necessitates the validation of burnup credit methods by comparison with LWR core criticals. These benchmarks are relevant because they test a methodology`s ability to predict spent fuel isotopic and to evaluate the reactivity effects of heterogeneities and strong absorbers. Data are available to perform analyses at precise state points. As part of the Burnup Credit Analysis Verification (BCAV) Task, the U.S. Department of Energy has sponsored analysis of selected reactor core critical configurations from commercial pressurized-water-reactors (PWRs). The initial analysis methodology used the SCALE-4 code system to analyze a set of reactor critical configurations from Virginia Power`s Slurry and North Anna reactors. However, the analysis procedure was complex and included the calculation of lumped fission products. The methodology has since been revised to simplify both the data requirements and the calculational procedure for the criticality analyst. This revised methodology is validated here by a comparison with three reactor critical configurations from Tennessee Valley Authority`s Sequoyah Unit 2 Cycle 3 and two from Virginia Power`s Slurry Unit 1 Cycle 2.
The current political and economic situations suggest that significant reductions of nuclear forces outside the US will continue. This implies that in times of crisis the rapid deployment of nuclear weapons into a theater may be required. This paper describes a proposed Mobile Integrated C{sup 3} and Security System (MICSS). The MICSS, together with associated personnel, could satisfy the command and control and security requirements of a deployed nuclear operation. Rapid deployment poses unique nuclear weapon surety difficulties that must be overcome for the operation to be effective and survivable. The MICSS must be portable, reliable, limited in size, and easily emplaced to facilitate movement, reduce the possibility of detection, and minimize manpower requirements. The MICSS will be based on existing technology. Sandia has designed prototype mobile command centers for the military. These command centers are based on an approach that stresses modularity, standards, and the use of an open architecture. Radio, telephone, satellite communications, communication security, and global positioning system equipment has been successfully integrated into the command centers. Sandia is also supporting the development of portable security systems for the military. These systems are rapidly deployable and mission flexible and are capable of intrusion detection, area and alarm display, night assessment, and wireless sensor communications. This paper is organized as follows: Background information about the prototype mobile command centers will be presented first. Background information about portable security systems concepts will then be given. Next, an integrated communications and security system will be presented, and finally, the design and status of a prototype MICSS will be described.
Through the Dish-Stirling Joint Venture Program (JVP) sponsored by the US Department of Energy (DOE), Cummins Power Generation, Inc., (CPG) and Sandia National Laboratories (SNL) have entered into a joint venture to develop and commercialize economically competitive dish-Stirling systems for remote power applications. The $14 million JVP is being conducted in three phases over a 3 1/2-year period in accordance with the Cummins Total Quality System (TQS) for new product development. The JVP is being funded equally by CPG, including its industrial partners, and the DOE. In June 1992, a ``concept validation`` (prototype) 5-kW{sub e}, dish-Stirling system became operational at the CPG test site m Abilene, TX. And on January 1, 1993, the program advanced to phase 2. On the basis of the performance of the 5-kW{sub e} system, a decision was made to increase the rated system output to 7.5-kW{sub e}. The CPG system uses advanced components that have the potential for low cost and reliable operation, but which also have technical risks. In this paper, the status of the advanced components and results from system integration testing are presented and discussed. Performance results from system testing of the 5-kW{sub e} prototype along with phase 2 goals for the 7.5-kW{sub e} system are also discussed.
This paper presents data compiled by the Photovoltaic Design Assistance Center at Sandia National Laboratories from more than eighty field tests performed at over thirty-five photovoltaic systems in the United States during the last ten years. The recorded performance histories, failure rates, and degradation of post-Block IV modules and balance-of-system (BOS) components are described in detail.
Drilling production-size holes for geothermal exploration puts a large expense at the beginning of the project, and thus requires a long period of debt service before those costs can be recaptured from power sales. If a reservoir can be adequately defined and proved by drilling smaller, cheaper slim-holes, production well drilling can be delayed until the power plant is under construction, saving years of interest payments. In the broadest terms, this project`s objective is to demonstrate that a geothermal resevoir can be identified and evaluated with data collected in slim holes. We have assembled a coordinated working group, including personnel from Sandia, Lawrence Berkeley Lab, University of Utah Research Institute, US Geological Survey, independent consultants, and geothermal operators, to focus on the development of this project. This group is involved to a greater or lesser extent in all decisions affecting the direction of the research. Specific tasks being pursued include: Correlation of fluid flow and injection tests between slim-holes and production size wells. Transfer of slim-hole exploration drilling and reservoir assessment to industry so that slim-hole drilling becomes an accepted method for geothermal exploration.Development and validation of a coupled wellbore-reservoir flow simulator which can be used for reservoir evaluation from slim-hole flow data. Collection of applicable data from commercial wells in existing geothermal fields. Drilling of at least one new slim-hole and use it to evaluate a geothermal reservoir.
C++ is commonly described as an object-oriented programming language because of its strong support for classes with multiple inheritance and polymorphism. However, for a growing community of numerical programmers, an equally important feature of C++ is its support of operator overloading on abstract data types. The authors choose to call the resulting style of programming object-oriented numerics. They believe that much of object-oriented numerics is orthogonal to conventional object-oriented programming. As a case study, they discuss two strong shock physics codes written in C++ that they`re currently developing. These codes use both polymorphic classes (typical of traditional object-oriented programming) and abstract data types with overloaded operators (typical of object-oriented numerics). They believe that C++ translators can generate efficient code for many numerical objects. However, for the important case of smart arrays (which are used to represent matrices and the fields found in partial differential equations) fundamental difficulties remain. The authors discuss the two most important of these, namely, the aliasing ambiguity and the proliferation of temporaries, and present some possible solutions.
At Sandia National Laboratories, the Engineering Sciences Center has made a commitment to integrate Application Visualization System (AVS) into our computing environment as the primary tool for scientific visualization. AVS will be used on an everyday basis by a broad spectrum of users ranging from the occasional computer user to AVS module developers. Additionally, AVS will be used to visualize structured grid, unstructured grid, gridless, 1D, 2D, 3D, steady-state, transient, computational, and experimental data. The following is one user`s perspective on how AVS meets this task. Several examples of how AVS is currently being utilized will be given along with some future directions.
