Publications

Results 97876–97900 of 100,993

Search results

Jump to search filters

Design verification activities in the Exploratory Studies Facility Starter Tunnel at Yucca Mountain

Pott, John

In situ design verification activities are being conducted in the North Ramp Starter Tunnel of the Yucca Mountain Project Exploratory Studies Facility. These activities include: monitoring the construction blasting, evaluating the damage to the rock mass associated with construction, assessing the rock mass quality surrounding the tunnel, monitoring the performance of the installed ground support, and monitoring the stability of the tunnel. In this paper, examples of the data that have been collected and preliminary conclusions from the data are presented.

More Details

Assembly partitioning with a constant number of translations

Wilson, Rodney K.

The authors consider the following problem that arises in assembly planning: given an assembly, identify a subassembly that can be removed as a rigid object without disturbing the rest of the assembly. This is the assembly partitioning problem. Specifically, they consider planar assemblies of simple polygons and subassembly removal paths consisting of a single finite translation followed by a translation to infinity. They show that such a subassembly and removal path can be determined in O(n{sup 1.46}N{sup 6}) time, where n is the number of polygons in the assembly and N is the total number of edges and vertices of all the parts together. They then extend this formulation to removal paths consisting of a small number of finite translations, followed by a translation to infinity. In this case the algorithm runs in time polynomial in the number of parts, but exponential in the number of translations a path may contain.

More Details

The role of high pressure in the study and applications of the ferroelectric polymer polyvinylidene fluoride and its copolymers

Samara, George A.

Effects of frequency, temperature and hydrostatic pressure on dielectric properties, molecular relaxations, and phase transitions of PVDF and a copolymer with 30 mol % trifluoroethylene are discussed. Pressure causes large slowing down of the {beta} molecular relaxations as well as large increases in the, ferroelectric transition temperatures and melting points, but the magnitudes of the effects are different for the different transitions. These effects can be understood in terms of pressure-induced hindrance of the molecular motions and/or reorientations. A unique application of these polymers as time-resolved dynamic stress gauges based on PVDF studies under very high pressure shock compression is discussed.

More Details

Comparison of model predictions with measurements using the improved spent fuel attribute tester

Dupree, S.A.

Design improvements for the International Atomic Energy Agency`s Spent Fuel Attribute Tester, recommended on the basis of an optimization study, were incorporated into a new instrument fabricated under the Finnish Support Programme. The new instrument was tested at a spent fuel storage pool on September 8 and 9, 1993. The result of two of the measurements have been compared with calculations. In both cases the calculated and measured pulse height spectra in good agreement and the {sup 137}Cs gamma peak signature from the target spent fuel element is present.

More Details

Design and implementation of a Synthetic Aperture Radar for Open Skies (SAROS) aboard a C-135 aircraft

Cooper, D.W.; Murphy, M.; Rimmel, G.

NATO and former Warsaw Pact nations have agreed to allow overflights of their countries in the interest of easing world tension. The United States has decided to implement two C-135 aircraft with a Synthetic Aperture Radar (SAR) that has a 3-meter resolution. This work is being sponsored by the Defense Nuclear Agency (DNA) and will be operational in Fall 1995. Since the SAR equipment must be exportable to foreign nations, a 20-year-old UPD-8 analog SAR system was selected as the front-end and refurbished for this application by Loral Defense Systems. Data processing is being upgraded to a currently exportable digital design by Sandia National Laboratories. Amplitude and phase histories will be collected during these overflights and digitized on VHS cassettes. Ground stations will use reduction algorithms to process the data and convert it to magnitude-detected images for member nations. System Planning Corporation is presently developing a portable ground station for use on the demonstration flights. Aircraft integration into the C-135 aircraft is being done by the Air Force at Wright-Patterson AFB, Ohio.

More Details

Development of solid state moisture sensors for semiconductor fabrication applications

Pfeifer, Kent B.

We describe the design and fabrication of two types of solid state moisture sensors, and discuss the results of an evaluation of the sensors for the detection of trace levels of moisture in semiconductor process gases. The first sensor is based on surface acoustic wave (SAW) technology. A moisture sensitive layer is deposited onto a SAW device, and the amount of moisture adsorbed on the layer produces a proportional shift in the operating frequency of the device. Sensors based on this concept have excellent detection limits for moisture in inert gas (100 ppb) and corrosive gas (150 ppb in HCl). The second sensor is a simple capacitor structure that uses porous silicon as a moisture-sensitive dielectric material. The detection limits of these sensors for moisture in inert gas are about 700 ppb prior to HCl exposure, and about 7 ppm following HCl exposure.

More Details

Can information surety be assessed with high confidence?

Lim, J.J.; Fletcher, S.K.; Halbgewachs, R.D.; Jansma, R.M.; Sands, P.D.; Watterberg, P.A.; Wyss, G.D.

Several basic reasons are given to support the position that an integrated, systems methodology entailing probabilistic assessment offers the best means for addressing the problems in software safety. The recognized hard problems in software safety, or safety per se, and some of the techniques for hazard identification and analysis are then discussed relative to their specific strengths and limitations. The paper notes that it is the combination of techniques that will lead to safer systems, and that more experience, examples, and applications of techniques are needed to understand the limits to which software safety can be assessed. Lastly, some on-going project work at Sandia National Laboratories on developing a solution methodology is presented

More Details

Application of network technology to Remote Monitoring System

Johnson, C.S.; Sorokowski, D.L.; Veevers, K.

The Australian Safeguards Office (ASO) and the US Department of Energy (DOE) have sponsored work under a bilateral agreement to implement a Remote Monitoring System (RMS) at an Australian nuclear site operated by the Australian Nuclear Science and Technology Organization (ANSTO). The RMS, designed by Sandia National Laboratories (SNL), was installed in February 1994 at the Dry Spent Fuel Storage Facility (DSFSF) located at Lucas Heights, Australia. The RMS was designed to test a number of different concepts that would be useful for unattended remote monitoring activities. The DSFSF located in Building 27 is a very suitable test site for a RMS. The RMS uses a network of low cost nodes to collect data from a number of different sensors and security devices. Different sensors and detection devices have been installed to study how they can be used to complement each other for C/S applications. The data collected from the network will allow a comparison of how the various types of sensors perform under the same set of conditions. A video system using digital compression collects digital images and stores them on a hard drive and a digital optical disk. Data and images from the storage area are remotely monitored via telephone from Canberra, Australia and Albuquerque, NM, USA. These remote monitoring stations operated by ASO and SNL respectively, can retrieve data and images from the RMS computer at the DSFSF. The data and images are encrypted before transmission. The Remote Monitoring System field tests have been operational for six months with good test results. Sensors have performed well and the digital images have excellent resolution. The hardware and software have performed reliably without any major difficulties. This paper summarizes the highlights of the prototype system and the ongoing field tests.

More Details

An image processing system for the monitoring of special nuclear material and personnel

Thai, Tan Q.

An important aspect of insider protection in production facilities is the monitoring of the movement of special nuclear material (SNM) and personnel. One system developed at Sandia National Labs for this purpose is the Personnel and Material Tracking System (PAMTRAK). PAMTRAK can intelligently integrate different sensor technologies and the security requirements of a facility to provide a unique capability in monitoring and tracking SNM and personnel. Currently many sensor technologies are used to track the location of personnel and SNM inside a production facility. These technologies are generally intrusive; they require special badges be worn by personnel, special tags be connected to material, and special detection devices be mounted in the area. Video technology, however, is non-intrusive because it does not require that personnel wear special badges or that special tags be attached to SNM. Sandia has developed a video-based image processing system consisting of three major components: the Material Monitoring-Subsystem (MMS), the Personnel Tracking Subsystem (PTS) and the Item Recognition Subsystem (IRS). The basic function of the MMS is to detect movements of SNM, that occur in user-defined regions of interest (ROI) from multiple cameras; these ROI can be of any shape and size. The purpose of the PTS is to track location of personnel in an area using multiple cameras. It can also be used to implement the two-person rule or to detect unauthorized personnel in a restricted area. Finally, the IRS can be used for the recognition and inventory of SNM in a working area. It can also generate a log record on the status of each SNM. Currently the MMS is integrated with PAMTRAK to complement other monitoring technologies in the system. The paper will discuss the system components and their implementations, and describe current enhancements as well as future work.

More Details

Sticky foam technology for less-than-lethal force situations

Goolsby, Tommy D.W.

Sticky foam is an extremely tacky, tenacious material used to entangle and impair an individual. It was developed at Sandia National Laboratories (SNL) in the late 1970`s for usage in nuclear safeguards and security applications. In late 1992, the National Institute of Justice (NIJ), the research arm of the Department of Justice, began a project with SNL to determine the applicability of sticky foam for law enforcement usage. The objectives of the project were to develop a dispenser capable of firing sticky foam, to conduct an extensive toxicology review of sticky foam (formulation SF-283), to test the developed dispenser and sticky foam effectiveness on SNL volunteers acting out prison and law enforcement scenarios, and to have the dispenser and sticky foam further evaluated by correctional representatives. This paper discusses the results of the project.

More Details

Characteristics of oxynitrides grown in N{sub 2}O

Fleetwood, Daniel M.

MOS oxides have been fabricated by oxidation of silicon in N{sub 2}O. Processes studied include oxidation in N{sub 2}O alone, and two-step oxidation in O{sub 2} followed by N{sub 2}O. For both oxides, a nitrogen-rich layer with a peak N concentration of {approximately} 0.5 at. % is observed at the Si-SiO{sub 2} interface with SIMS. Electrical characteristics of N{sub 2}O oxides, such as breakdown and defect generation, are generally improved, especially for the two-step process. Drawbacks typically associated with NH{sub 3}-nitrided oxides such as high fixed oxide charge and enhanced electron trapping, are not observed in N{sub 2}O oxides, which is probably due to their smaller nitrogen content.

More Details

Sandia Explosive Inventory and Information System

Mcgahan, Dyan A.

The Explosive Inventory and Information System (EIS) is being developed and implemented by Sandia National Laboratories (SNL) to incorporate a cradle to grave structure for all explosives and explosive containing devices and assemblies at SNL from acquisition through use, storage, reapplication, transfer or disposal. The system does more than track all material inventories. It provides information on material composition, characteristics, shipping requirements; life cycle cost information, plan of use; and duration of ownership. The system also provides for following the processes of explosive development; storage review; justification for retention; Resource, Recovery and Disposition Account (RRDA); disassembly and assembly; and job description, hazard analysis and training requirements for all locations and employees involved with explosive operations. In addition, other information systems will be provided through the system such as the Department of Energy (DOE) and SNL Explosive Safety manuals, the Navy`s Department of Defense (DoD) Explosive information system, and the Lawrence Livermore National Laboratories (LLNL) Handbook of Explosives.

More Details

A method for reducing encapsulation stress to ferrite pot cores

Sanchez, Robert O.

This paper describes a method of reducing the mechanical stress caused when a ferrite pot core is encapsulated in a rigid epoxy. the stresses are due to the differences of coefficient of thermal expansion between the two materials. A stress relief medium, phenolic micro-balloon-filled, syntactic polysulfide, is molded into the shape of the pot core. The molded polysulfide is bonded to the core prior to encapsulation. The new package design has made a significant difference in the ability to survive temperature cycles.

More Details

Defense Programs Transportation Risk Assessment

Clauss, David B.

This paper provides an overview of the methodology used in a probabilistic transportation risk assessment conducted to assess the probabilities and consequences of inadvertent dispersal of radioactive materials arising from severe transportation accidents. The model was developed for the Defense Program Transportation Risk Assessment (DPTRA) study. The analysis incorporates several enhancements relative to previous risk assessments of hazardous materials transportation including newly-developed statistics on the frequencies and severities of tractor semitrailer accidents and detailed route characterization using the 1990 Census data.

More Details

Tamper indicating packaging

Baumann, M.J.; Bartberger, J.C.; Welch, T.D.

Protecting sensitive items from undetected tampering in an unattended environment is crucial to the success of non-proliferation efforts relying on the verification of critical activities. Tamper Indicating Packaging (TIP) technologies are applied to containers, packages, and equipment that require an indication of a tamper attempt. Examples include: the transportation and storage of nuclear material, the operation and shipment of surveillance equipment and monitoring sensors, and the retail storage of medicine and food products. The spectrum of adversarial tampering ranges from attempted concealment of a pin-hole sized penetration to the complete container replacement, which would involve counterfeiting efforts of various degrees. Sandia National Laboratories (SNL) has developed a technology base for advanced TIP materials, sensors, designs, and processes which can be adapted to various future monitoring systems. The purpose of this technology base is to investigate potential new technologies, and to perform basic research of advanced technologies. This paper will describe the theory of TIP technologies and recent investigations of TIP technologies at SNL.

More Details

Safeguards equipment of the future integrated monitoring systems and remote monitoring

Sonnier, C.S.; Johnson, C.S.

Becoming aware of the significant events of the past four years and their effect on the expectations to international safeguards, it is necessary to reflect on which direction the development of nuclear safeguards in a new era needs to take and the implications. The lime proven monitoring techniques, based on quantitative factor`s and demonstrated universal application, have shown their merit. However, the new expectations suggest a possibility that a future IAEA safeguards system could rely more heavily on the value of a comprehensive, transparent and open implementation regime. Within such a regime, the associated measures need to be determined and technological support identified. This paper will identify the proven techniques which, with appropriate implementation support, could most quickly make available additional measures for a comprehensive, transparent and open implementation regime. In particular, it will examine the future of Integrated Monitoring Systems and Remote Monitoring in international safeguards, including technical and other related factors.

More Details

ALT-II armor tile design for upgraded TEXTOR operation

Mcgrath, R.T.

The upgrade of the TEXTOR tokamak at KFA Juelich was recently completed. This upgrade extended the TEXTOR pulse length from 5 seconds to 10 seconds. The auxiliary heating was increased to a total of 8.0 MW through a combination of neutral beam injection and radio frequency heating. Originally, the inertially cooled armor tiles of the full toroidal belt Advanced Limiter Test -- II (ALT-II) were designed for a 5-second operation with total heating of 6.0 MW. The upgrade of TEXTOR will increase the energy deposited per pulse onto the ALT-II by about 300%. Consequently, the graphite armor tiles for the ALT-II had to be redesigned to avoid excessively high graphite armor surface temperatures that would lead to unacceptable contamination of the plasma. This redesign took the form of two major changes in the ALT-II armor tile geometry. The first design change was an increase of the armor tile thermal mass, primarily by increasing the radial thickness of each tile from 17 mm to 20 mm. This increase in the radial tile dimension reduces the overall pumping efficiency of the ALT-II pump limiter by about 30%. The reduction in exhaust efficiency is unfortunate, but could be avoided only by active cooling of the ALT-II armor tiles. The active cooling option was too complicated and expensive to be considered at this time. The second design change involved redefining the plasma facing surface of each armor tile in order to fully utilize the entire surface area. The incident charged particle heat flux was distributed uniformly over the armor tile surfaces by carefully matching the radial, poloidal and toroidal curvature of each tile to the plasma flow in the TEXTOR boundary layer. This geometry redefinition complicates the manufacturing of the armor tiles, but results in significant thermal performance gains. In addition to these geometry upgrades, several material options were analyzed and evaluated.

More Details

Progress in the development of recycling processes for electric vehicle batteries

Jungst, Rudolph G.

Disposition of electric vehicle (EV) batteries after they have reached the end of their useful life is an issue that could impede the widespread acceptance of EVs in the commercial market. This is especially true for advanced battery systems where working recycling processes have not as yet been established. The DOE sponsors an Ad Hoc Electric Vehicle Battery Readiness Working Group to identify barriers to the introduction of commercial EVs and to advise them of specific issues related to battery reclamation/recycling, in-vehicle battery safety, and battery shipping. A Sub-Working Group on the reclamation/recycle topic has been reviewing the status of recycling process development for the principal battery technologies that are candidates for EV use from the near-term to the long-term. Recycling of near-term battery technologies, such as lead-acid and nickel/cadmium, is occurring today and it is believed that sufficient processing capacity can be maintained to keep up with the large number of units that could result from extensive EV use. Reclamation/recycle processes for midterm batteries are partially developed. Good progress has been made in identifying processes to recycle sodium/sulfur batteries at a reasonable cost and pilot scale facilities are being tested or planned. A pre-feasibility cost study on the nickel/metal hydride battery also indicates favorable economics for some of the proposed reclamation processes. Long-term battery technologies, including lithium-polymer and lithium/iron disulfide, are still being designed and developed for EVs, so descriptions for prototype recycling processes are rather general at this point. Due to the long time required to set up new, full-scale recycling facilities, it is important to develop a reclamation/recycling process in parallel with the battery technologies themselves.

More Details

Determining information management needs for enhanced international safeguards

Deland, Sharon M.

The Safeguards Information Management System initiative is a program of the Department of Energy`s (DOE) Office of Arms Control and Nonproliferation aimed at supporting the International Atomic Energy Agency`s (IAEA) efforts to strengthen safeguards through the enhancement of information management capabilities. The DOE hopes to provide the IAEA with the ability to correlate and analyze data from existing and new sources of information, including publicly available information, information on imports and exports, design information, environmental monitoring data, and non-safeguards information. The first step in this effort is to identify and define IAEA requirements. In support of this, we have created a users` requirements document based on interviews with IAEA staff that describes the information management needs of the end user projected by the IAEA, including needs for storage, retrieval, analysis, communication, and visualization of data. Also included are characteristics of the end user and attributes of the current environment. This paper describes our efforts to obtain the required information. We discuss how to accurately represent user needs and involve users for an international organization with a multi-cultural user population. We describe our approach, our experience in setting up and conducting the interviews and brainstorming sessions, and a brief discussion of what we learned.

More Details

Input shaping for vibration-damped slewing of a flexible beam using a heavy-lift hydraulic robot

Parker, G.G.

An input shaping scheme originally used to slew flexible beams via a tabletop D.C. motor is modified for use with an industrial-type, hydraulic-drive robot. This trajectory generation method was originally developed to produce symmetric, rest-to-rest maneuvers of flexible rotating rods where the angular velocity vector and gravitational vector were collinear. In that configuration, out-of-plane oscillations were excited due to centripetal acceleration of the rod. The bang-coast-bang acceleration profile resulted in no oscillations in either plane at the end of the symmetric slew maneuver. In this paper, a smoothed version of the bang-coast-bang acceleration is used for symmetric maneuvers where the angular velocity vector is orthogonal to the gravitational vector. Furthermore, the hydraulic robot servo dynamics are considered explicitly in determining the input joint angle trajectory. An instrumented mass is attached to the tip of a flexible aluminum rod. The first natural frequency of this system is about 1.0Hz. Joint angle responses obtained with encoder sensors are used to identify the servo actuator dynamics.

More Details

Multidimensional thermal-chemical cookoff modeling

Baer, M.R.; Gross, R.J.; Gartling, D.K.; Hobbs, M.L.

Multidimensional thermal/chemical modeling is an essential step in the development of a predictive capability for cookoff of energetic materials in systems subjected to abnormal thermal environments. COYOTE II is a state-of-the-art two- and three-dimensional finite element code for the solution of heat conduction problems including surface-to-surface thermal radiation heat transfer and decomposition chemistry. Multistep finite rate chemistry is incorporated into COYOTE II using an operator-splitting methodology; rate equations are solved element-by-element with a modified matrix-free stiff solver, CHEMEQ. COYOTE II is purposely designed with a user-oriented input structure compatible with the database, the pre-processing mesh generation, and the post-processing tools for data visualization shared with other engineering analysis codes available at Sandia National Laboratories. As demonstrated in a companion paper, decomposition during cookoff in a confined or semi-confined system leads to significant mechanical behavior. Although mechanical effect are not presently considered in COYOTE II, the formalism for including mechanics in multidimensions is under development.

More Details

Structure-property relationships in sol-gel-derived thin films

Brinker, C.J.

The molecular-scale species distributions and intermediate-scale structure of silicate sols influence the microstructures of the corresponding thin films prepared by dip-coating. Using multi-step hydrolysis procedures, the authors find that, depending on the sequence and timing of the successive steps, the species distributions (determined by {sup 29}Si NMR) and intermediate scale structure (determined by SAXS) can change remarkably for sols prepared with the same nominal composition. During film formation, these kinetic effects cause differences in the efficiency of packing of the silicate species, leading to thin film structures with different porosities.

More Details
Results 97876–97900 of 100,993
Results 97876–97900 of 100,993
Top