Superresolution concepts offer the potential of resolution beyond the classical limit. This great promise has not generally been realized. In this study we investigate the potential application of superresolution concepts to synthetic aperture radar. The analytical basis for superresolution theory is discussed. In a previous report the application of the concept to synthetic aperture radar was investigated as an operator inversion problem. Generally, the operator inversion problem is ill posed. This work treats the problem from the standpoint of regularization. Both the operator inversion approach and the regularization approach show that the ability to superresolve SAR imagery is severely limited by system noise.
A technical review is presented of experiment activities and state of knowledge on air-borne, radiation source terms resulting from explosive sabotage attacks on spent reactor fuel subassemblies in shielded casks. Current assumptions about the behavior of irradiated fuel are largely based on a limited number of experimental results involving unirradiated, depleted uranium dioxide ''surrogate'' fuel. The behavior of irradiated nuclear fuel subjected to explosive conditions could be different from the behavior of the surrogate fuel, depending on the assumptions made by the evaluator. Available data indicate that these potential differences could result in errors, and possible orders-of-magnitude overestimates of aerosol dispersion and potential health effects from sabotage attacks. Furthermore, it is suggested that the current assumptions used in arriving at existing regulations for the transportation and storage of spent fuel in the U.S. are overly conservative. This, in turn, has led to potentially higher-than-needed operating expenses for those activities. A confirmatory experimental program is needed to develop a realistic correlation between source terms of irradiated fuel and unirradiated fuel. The motivations for performing the confirmatory experimental program are also presented.
This document describes a proactive plan for assessing and controlling sources of risk for the ASCI (Accelerated Strategic Computing Initiative) V&V program at Sandia National Laboratories. It offers a graded approach for identifying, analyzing, prioritizing, responding to, and monitoring risks.
The goal of this project was to develop a device that uses electric fields to grasp and possibly levitate LIGA parts. This non-contact form of grasping would solve many of the problems associated with grasping parts that are only a few microns in dimensions. Scaling laws show that for parts this size, electrostatic and electromagnetic forces are dominant over gravitational forces. This is why micro-parts often stick to mechanical tweezers. If these forces can be controlled under feedback control, the parts could be levitated, possibly even rotated in air. In this project, we designed, fabricated, and tested several grippers that use electrostatic and electromagnetic fields to grasp and release metal LIGA parts. The eventual use of this tool will be to assemble metal and non-metal LIGA parts into small electromechanical systems.
Photovoltaic inverters are the most mature of any DER inverter, and their mean time to first failure (MTFF) is about five years. This is an unacceptable MTFF and will inhibit the rapid expansion of PV. With all DER technologies, (solar, wind, fuel cells, and microturbines) the inverter is still an immature product that will result in reliability problems in fielded systems. The increasing need for all of these technologies to have a reliable inverter provides a unique opportunity to address these needs with focused R&D development projects. The requirements for these inverters are so similar that modular designs with universal features are obviously the best solution for a ''next generation'' inverter. A ''next generation'' inverter will have improved performance, higher reliability, and improved profitability. Sandia National Laboratories has estimated that the development of a ''next generation'' inverter could require approximately 20 man-years of work over an 18- to 24-month time frame, and that a government-industry partnership will greatly improve the chances of success.
The synthesis and characterization of soluble and processable high molecular weight polysilsesquioxanes with carboxylate functionalities was discussed. It was found that the tert-butyl functionality in these polymers was eliminated to give carboxylic acids functionalized polysilsesquioxane or methyltin carboxylatosilsesquioxane gels. The analysis showed that the polysilsesquioxane binds and removes tin through gelation.
The Boeing Company fabricated the Solar Two receiver as a subcontractor for the Solar Two project. The receiver absorbed sunlight reflected from the heliostat field. A molten-nitrate-salt heat transfer fluid was pumped from a storage tank at grade level, heated from 290 to 565 C by the receiver mounted on top of a tower, then flowed back down into another storage tank. To make electricity, the hot salt was pumped through a steam generator to produce steam that powered a conventional Rankine steam turbine/generator. This evaluation identifies the most significant Solar Two receiver system lessons learned from the Mechanical Design, Instrumentation and Control, Panel Fabrication, Site Construction, Receiver System Operation, and Management from the perspective of the receiver designer/manufacturer. The lessons learned on the receiver system described here consist of two parts: the Problem and one or more identified Solutions. The appendix summarizes an inspection of the advanced receiver panel developed by Boeing that was installed and operated in the Solar Two receiver.
Polycrystalline silicon (polysilicon) surface micromachining is a new technology for building micrometer ({micro}m) scale mechanical devices on silicon wafers using techniques and process tools borrowed from the manufacture of integrated circuits. Sandia National Laboratories has invested a significant effort in demonstrating the viability of polysilicon surface micromachining and has developed the Sandia Ultraplanar Micromachining Technology (SUMMiT V{trademark} ) process, which consists of five structural levels of polysilicon. A major advantage of polysilicon surface micromachining over other micromachining methods is that thousands to millions of thin film mechanical devices can be built on multiple wafers in a single fabrication lot and will operate without post-processing assembly. However, if thin film mechanical or surface properties do not lie within certain tightly set bounds, micromachined devices will fail and yield will be low. This results in high fabrication costs to attain a certain number of working devices. An important factor in determining the yield of devices in this parallel-processing method is the uniformity of these properties across a wafer and from wafer to wafer. No metrology tool exists that can routinely and accurately quantify such properties. Such a tool would enable micromachining process engineers to understand trends and thereby improve yield of micromachined devices. In this LDRD project, we demonstrated the feasibility of and made significant progress towards automatically mapping mechanical and surface properties of thin films across a wafer. The MEMS parametrics measurement team has implemented a subset of this platform, and approximately 30 wafer lots have been characterized. While more remains to be done to achieve routine characterization of all these properties, we have demonstrated the essential technologies. These include: (1) well-understood test structures fabricated side-by-side with MEMS devices, (2) well-developed analysis methods, (3) new metrologies (i.e., long working distance interferometry) and (4) a hardware/software platform that integrates (1), (2) and (3). In this report, we summarize the major focus areas of our LDRD project. We describe the contents of several articles that provide the details of our approach. We also describe hardware and software innovations we made to realize a fully automatic wafer prober system for MEMS mechanical and surface property characterization across wafers and from wafer-lot to wafer-lot.
This report documents measurements in inductively driven plasmas containing SF{sub 6}/Argon gas mixtures. The data in this report is presented in a series of appendices with a minimum of interpretation. During the course of this work we investigated: the electron and negative ion density using microwave interferometry and laser photodetachment; the optical emission; plasma species using mass spectrometry, and the ion energy distributions at the surface of the rf biased electrode in several configurations. The goal of this work was to assemble a consistent set of data to understand the important chemical mechanisms in SF{sub 6} based processing of materials and to validate models of the gas and surface processes.
This report presents general concepts in a broadly applicable methodology for validation of Accelerated Strategic Computing Initiative (ASCI) codes for Defense Programs applications at Sandia National Laboratories. The concepts are defined and analyzed within the context of their relative roles in an experimental validation process. Examples of applying the proposed methodology to three existing experimental validation activities are provided in appendices, using an appraisal technique recommended in this report.
LOCA, the Library of Continuation Algorithms, is a software library for performing stability analysis of large-scale applications. LOCA enables the tracking of solution branches as a function of a system parameter, the direct tracking of bifurcation points, and, when linked with the ARPACK library, a linear stability analysis capability. It is designed to be easy to implement around codes that already use Newton's method to converge to steady-state solutions. The algorithms are chosen to work for large problems, such as those that arise from discretizations of partial differential equations, and to run on distributed memory parallel machines. This manual presents LOCA's continuation and bifurcation analysis algorithms, and instructions on how to implement LOCA with an application code. The LOCA code is being made publicly available at www.cs.sandia.gov/loca.
Three-dimensional finite element analyses simulate the mechanical response of enlarging existing caverns at the Strategic Petroleum Reserve (SPR). The caverns are located in Gulf Coast salt domes and are enlarged by leaching during oil drawdowns as fresh water is injected to displace the crude oil from the caverns. The current criteria adopted by the SPR limits cavern usage to 5 drawdowns (leaches). As a base case, 5 leaches were modeled over a 25 year period to roughly double the volume of a 19 cavern field. Thirteen additional leaches where then simulated until caverns approached coalescence. The cavern field approximated the geometries and geologic properties found at the West Hackberry site. This enabled comparisons are data collected over nearly 20 years to analysis predictions. The analyses closely predicted the measured surface subsidence and cavern closure rates as inferred from historic well head pressures. This provided the necessary assurance that the model displacements, strains, and stresses are accurate. However, the cavern field has not yet experienced the large scale drawdowns being simulated. Should they occur in the future, code predictions should be validated with actual field behavior at that time. The simulations were performed using JAS3D, a three dimensional finite element analysis code for nonlinear quasi-static solids. The results examine the impacts of leaching and cavern workovers, where internal cavern pressures are reduced, on surface subsidence, well integrity, and cavern stability. The results suggest that the current limit of 5 oil drawdowns may be extended with some mitigative action required on the wells and later on to surface structure due to subsidence strains. The predicted stress state in the salt shows damage to start occurring after 15 drawdowns with significant failure occurring at the 16th drawdown, well beyond the current limit of 5 drawdowns.
This report addresses the effects of spectrum loading on lifetime and residual strength of a typical fiberglass laminate configuration used in wind turbine blade construction. Over 1100 tests have been run on laboratory specimens under a variety of load sequences. Repeated block loading at two or more load levels, either tensile-tensile, compressive-compressive, or reversing, as well as more random standard spectra have been studied. Data have been obtained for residual strength at various stages of the lifetime. Several lifetime prediction theories have been applied to the results. The repeated block loading data show lifetimes that are usually shorter than predicted by the most widely used linear damage accumulation theory, Miner's sum. Actual lifetimes are in the range of 10 to 20 percent of predicted lifetime in many cases. Linear and nonlinear residual strength models tend to fit the data better than Miner's sum, with the nonlinear providing a better fit of the two. Direct tests of residual strength at various fractions of the lifetime are consistent with the residual strength models. Load sequencing effects are found to be insignificant. The more a spectrum deviates from constant amplitude, the more sensitive predictions are to the damage law used. The nonlinear model provided improved correlation with test data for a modified standard wind turbine spectrum. When a single, relatively high load cycle was removed, all models provided similar, though somewhat non-conservative correlation with the experimental results. Predictions for the full spectrum, including tensile and compressive loads were slightly non-conservative relative to the experimental data, and accurately captured the trend with varying maximum load. The nonlinear residual strength based prediction with a power law S-N curve extrapolation provided the best fit to the data in most cases. The selection of the constant amplitude fatigue regression model becomes important at the lower stress, higher cycle loading cases. The residual strength models may provide a more accurate estimate of blade lifetime than Miner's rule for some loads spectra. They have the added advantage of providing an estimate of current blade strength throughout the service life.
The final report for a Laboratory Directed Research and Development project entitled, Molecular Simulation of Reacting Systems is presented. It describes efforts to incorporate chemical reaction events into the LAMMPS massively parallel molecular dynamics code. This was accomplished using a scheme in which several classes of reactions are allowed to occur in a probabilistic fashion at specified times during the MD simulation. Three classes of reaction were implemented: addition, chain transfer and scission. A fully parallel implementation was achieved using a checkerboarding scheme, which avoids conflicts due to reactions occurring on neighboring processors. The observed chemical evolution is independent of the number of processors used. The code was applied to two test applications: irreversible linear polymerization and thermal degradation chemistry.
Military test and training ranges generate scrap materials from targets and ordnance debris. These materials are routinely removed from the range for recycling; however, energetic material residues in this range scrap has presented a significant safety hazard to operations personnel and damaged recycling equipment. The Strategic Environmental Research and Development Program (SERDP) sought proof of concept evaluations for monitoring technologies to identify energetic residues among range scrap. Sandia National Laboratories teamed with Nomadics, Inc. to evaluate the Nomadics FIDO vapor sensor for application to this problem. Laboratory tests were completed that determined the vapor-sensing threshold to be 10 to 20 ppt for TNT and 150 to 200 ppt for DNT. Field tests with the FIDO demonstrated the proof of concept that energetic material residues can be identified with vapor sensing in enclosed scrap bins. Items such as low order detonation debris, demolition block granules, and unused 81-mm mortars were detected quickly and with minimum effort. Conceptual designs for field-screening scrap for energetic material residues include handheld vapor sensing systems, batch scrap sensing systems, continuous conveyor sensing systems and a hot gas decontamination verification system.
A physics-based understanding of material aging mechanisms helps to increase reliability when predicting the lifetime of mechanical and electrical components. This report examines in detail the mechanisms of atmospheric copper sulfidation and evaluates new methods of parallel experimentation for high-throughput corrosion analysis. Often our knowledge of aging mechanisms is limited because coupled chemical reactions and physical processes are involved that depend on complex interactions with the environment and component functionality. Atmospheric corrosion is one of the most complex aging phenomena and it has profound consequences for the nation's economy and safety. Therefore, copper sulfidation was used as a test-case to examine the utility of parallel experimentation. Through the use of parallel and conventional experimentation, we measured: (1) the sulfidation rate as a function of humidity, light, temperature and O{sub 2} concentration; (2) the primary moving species in solid state transport; (3) the diffusivity of Cu vacancies through Cu{sub 2}S; (4) the sulfidation activation energies as a function of relative humidity (RH); (5) the sulfidation induction times at low humidities; and (6) the effect of light on the sulfidation rate. Also, the importance of various sulfidation mechanisms was determined as a function of RH and sulfide thickness. Different models for sulfidation-reactor geometries and the sulfidation reaction process are presented.