Publications

The molecular-scale species distributions and intermediate-scale structure of silicate sols influence the microstructures of the corresponding thin films prepared by dip-coating. Using multi-step hydrolysis procedures, the authors find that, depending on the sequence and timing of the successive steps, the species distributions (determined by {sup 29}Si NMR) and intermediate scale structure (determined by SAXS) can change remarkably for sols prepared with the same nominal composition. During film formation, these kinetic effects cause differences in the efficiency of packing of the silicate species, leading to thin film structures with different porosities.

The porosity of sol-gel thin films may be tailored for specific applications through control of the size and structure of inorganic polymers within the coating sol, the extent of polymer reaction and interpenetration during film formation, and the magnitude of the capillary pressure exerted during the final stage of drying. By maximizing the capillary pressure and avoiding excessive condensation, dense insulating films may be prepared as passivation layers on silicon substrates. Such films can exhibit excellent dielectric integrity, viz., low interface trap densities and insulating properties approaching those of thermally grown SiO[sub 2]. Alternatively, through exploitation of the scaling relationship of mass and density of fractal objects, silica films can be prepared that show a variation in porosity (7--29 %) and refractive index (1.42--1.31) desired for applications in sensors, membranes, and photonics.

Inorganic thin films with molecular sieving properties have been formed by embedding microcrystals of zeolite Y and chabazite in a glassy silica matrix. The silica matrix was derived from sols prepared from tetraethylorthosilicate hydrolyzed under either acidic or basic conditions in alcoholic solution. Dip-coating, deposition of suspensions, or coating of zeolite dispersions with the glassy silica matrix were used to create the zeolite-silica films. The access of different probe molecules into the zeolitic part of the thin film was examined with in situ FTIR techniques and temperature-programmed-desorption studies. With all combinations of deposition techniques and silica matrices, the resulting films showed the molecular sieving properties of the parent zeolite. © 1989, Elsevier Science & Technology. All rights reserved.

This report summarizes research on the aging of Class I components in environments representative of nuclear power plants. It discusses Class IE equipment used in nuclear power plants, typical environments encountered by Class IE components, and aging techniques used to qualify this equipment. General discussions of radiation chemistry of polymers and accelerated aging techniques are also included. Based on the inadequacies of present aging techniques for Class IE equipment, a proposal for an experimental program on electrical cables is presented. One of the main purposes of the proposed work is to obtain relevant data in two areas of particular concern--the effect of radiation dose rate on polymer degradation, and the importance of synergism for combined thermal and radiation environments. A new model that allows combined environment accelerated aging to be carried out is introduced, and it is shown how the experimental data to be generated can be used to test this model.