Publications

Abstract not provided.

Abstract not provided.

Abstract not provided.

Thermal detection has made extensive progress in the last 40 years, however, the speed and detectivity can still be improved. The advancement of silicon photonic microring resonators has made them intriguing for detection devices due to their small size and high quality factors. Implementing silicon photonic microring or microdisk resonators as a means of a thermal detector gives rise to higher speed and detectivity, as well as lower noise compared to conventional devices with electrical readouts. This LDRD effort explored the design and measurements of silicon photonic microdisk resonators used for thermal detection. The characteristic values, consisting of the thermal time constant ({tau} {approx} 2 ms) and noise equivalent power were measured and found to surpass the performance of the best microbolometers. Furthermore the detectivity was found to be D{sub {lambda}} = 2.47 x 10{sup 8} cm {center_dot} {radical}Hz/W at 10.6 {mu}m which is comparable to commercial detectors. Subsequent design modifications should increase the detectivity by another order of magnitude. Thermal detection in the terahertz (THz) remains underdeveloped, opening a door for new innovative technologies such as metamaterial enhanced detectors. This project also explored the use of metamaterials in conjunction with a cantilever design for detection in the THz region and demonstrated the use of metamaterials as custom thin film absorbers for thermal detection. While much work remains to integrate these technologies into a unified platform, the early stages of research show promising futures for use in thermal detection.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

We present the theory of operation along with detailed device designs and initial experimental results of a new class of uncooled thermal detectors. The detectors, termed microphotonic thermal detectors, are based on the thermo-optic effect in high quality factor (Q) micrometer-scale optical resonators. Microphotonic thermal detectors do not suffer from Johnson noise, do not require metallic connections to the sensing element, do not suffer from charge trapping effects, and have responsivities orders of magnitude larger than microbolometer-based thermal detectors. For these reasons, microphotonic thermal detectors have the potential to reach thermal phonon noise limited performance. © 2009 SPIE.

The authors establish a fundamental relationship between the phase and amplitude responses of an optomechanically variable photonic circuit and the forces and potentials produced by light. These results are illustrated through resonant and nonresonant multi-port systems.

Abstract not provided.