Publications

Abstract not provided.

Visualization of flow structures within post-detonation fireballs has been performed for benchmark validation of numerical simulations. Custom pressed PETN explosives with a 12-mm diameter hemispherical form factor were used to produce a spherically symmetric post-detonation flow with low soot yield. Hydroxyl-radical planar laser induce fluorescence (OH-PLIF) was employed to visualize the structure ranging from approximately 10μs to 35μs after shock breakout from the explosive pellet. Fireball simulations were performed using the HyBurn Computational Fluid Dynamics (CFD) package. Experimental OH-PLIF results were compared to synthetic OH-PLIF from post-processing of CFD simulations. From the comparison of experimental and synthetic OH-PLIF images, CFD is shown to replicate much of the flow structure observed in the experiments, revealing potential differences in turbulent length scales and OH kinetics. Results provide significant advancement in experimental resolution of these harsh turbulent combustion environments and validate physical models thereof.

A quantum-cascade-laser-absorption-spectroscopy (QCLAS) diagnostic was used to characterize post-detonation fireballs of RP-80 detonators via measurements of temperature, pressure, and CO column pressure at a repetition rate of 1 MHz. Scanned-wavelength direct-absorption spectroscopy was used to measure CO absorbance spectra near 2008.5 cm−1 which are dominated by the P(0,31), P(2,20), and P(3,14) transitions. Line-of-sight (LOS) measurements were acquired 51 and 91 mm above the detonator surface. Three strategies were employed to facilitate interpretation of the LAS measurements in this highly nonuniform environment and to evaluate the accuracy of four post-detonation fireball models: (1) High-energy transitions were used to deliberately bias the measurements to the high-temperature outer shell, (2) a novel dual-zone absorption model was used to extract temperature, pressure, and CO measurements in two distinct regions of the fireball at times where pressure variations along the LOS were pronounced, and (3) the LAS measurements were compared with synthetic LAS measurements produced using the simulated distributions of temperature, pressure, and gas composition predicted by reactive CFD modeling. The results indicate that the QCLAS diagnostic provides high-fidelity data for evaluating post-detonation fireball models, and that assumptions regarding thermochemical equilibrium and carbon freeze-out during expansion of detonation gases have a large impact on the predicted chemical composition of the fireball.

Abstract not provided.