Publications

Results 100701–100725 of 100,993

Search results

Jump to search filters

Circuit level modeling of inductive elements

Muyshondt, G.P.; Portnoy, W.M.

Design and analysis of spacecraft power systems have been difficult to perform because of the lack of circuit level models for nonlinear inductive elements. This paper reviews some of the models which have been proposed, their limitations, and applications. An improved saturation dependent model will be described. The model has been implemented in SPICE and with a commercial circuit program and demonstrated to be satisfactory in both implementations. 3 refs., 9 figs.

More Details

VIBRAFUGE: A combined environment testing facility --- vibration testing on a centrifuge

Doggett, J.

Vibration testing in a centrifuge acceleration field (up to 50 gs) can be accomplished in either of two axes relative to the centrifuge acceleration with a modified, commercially available, electrodynamic shaker and the use of a specially designed orthogonal motion converter. Fixing the shaker armature axis in-line with the centrifuge arm (head towards the pivot) keeps the inertial forces on the head in the one direction which can be offset with servo controlled pneumatic bags located beneath the shaker head. Testing in an axis perpendicular to the principal axis is accomplished with the orthogonal motion converter which is driven by the shaker head. 13 figs.

More Details

Full-scale aircraft impact test for evaluatioin of impact force: Part 2: Analysis of results

Von Riesemann, W.A.

For estimating the global elasto-plastic structural response of critical concrete structures subjected to an aircraft crash, the time dependent impact force of a flat rigid barrier against a normally impacting aircraft was first evaluated and then the response, to the impact force, was calculated. In this approach, a significant problem was to determine the impact force for the aircraft against a rigid target. A review of the method proposed to determine the impact forces showed that all were based on analytical methods. However, in these analytical methods, there were many assumptions and many questions remained to be answered. Because of the uncertainty involved in the analytical prediction of the impact force, a full- scale aircraft impact test was performed and an extensive suite of response measurements was obtained. In this paper, these measurements are analyzed to evaluate the impact force accurately. Also, the results were used to evaluate existing analytical methods for prediction of the impact force. 7 refs., 10 figs.

More Details

The effects of pressure on the /beta/ molecular relaxation process in polyvinylidene fluoride

Samara, George A.

The hydrostatic pressure dependence of the /beta/ molecular relaxation process of polyvinylidene fluoride (PVDF) has been investigated to 20 kbar. This relaxation is known to have a strong influence on the electrical and mechanical properties of PVDF. The observed large slowing down of the relaxation process is discussed in terms of the Vogel/endash/Fulcher equation. There is an increase in both the energy barrier to dipolar motion and the reference temperature (T/sub 0/) for the kinetic relaxation process which represents the ''static'' dipolar freezing temperature for the process.

More Details

A solid state video recorder as a direct replacement of a mechanically driven disc recording device in a security system

Terry, Preston L.

Whether upgrading or developing a security system, investing in a solid state video recorder may prove to be quite prudent. Even though the initial cost of a solid state recorder may be more expensive, when comparing it to a disc recorder it is practically maintenance free. Thus, the cost effectiveness of a solid state video recorder over an extended period of time more than justifies the initial expense. This document illustrates the use of a solid state video recorder as a direct replacement. It replaces a mechanically driven disc recorder that existed in a synchronized video recording system. The original system was called the Universal Video Disc Recorder System. The modified system will now be referred to as the Solid State Video Recording System. 5 figs.

More Details

Demonstrations of a real time personnel and material tracking system

Trujillo, A.A.; Hoover, C.E.

Past experience in addressing the insider threat has led to the development of general principles for mitigating the insider threat while minimizing adverse impacts on site operations. Among the general principles developed was the requirement for real time tracking of personnel and material. A real time system for personnel and material tracking will aid in mitigating the insider threat by providing critical information regarding the movement and location of personnel and material. In addition, this system can provide an early detection mechanism for potential insider actions. This paper describes the development, operation, and performance of a technology-based system which utilizes radio frequency transmitters to achieve the real time tracking of personnel and material. The major elements of this system are personnel tracking credential which cannot be removed from an authorized individual without an alarm being sounded, and material control device which is utilized to control and monitor access to material. These elements form an insider protection system through the use of software which establishes the ''rules'' under which the system will operate. The performance of this system has been evaluated under both laboratory and operational settings in order to: (1) demonstrate the system's ability to successfully control access to material and areas by personnel, and (2) provide information regarding the status of materials in transit and storage. 3 refs., 1 fig.

More Details

NUREG-1150 methodology overview

Jow, Hong-Nian

The Nuclear Engineering Department of National Tsing Hua University organized a workshop on Severe Accident Management. The workshop was sponsored by Taiwan Power Company and was held at Taipei, Taiwan from July 31 to August 11, 1989. The topics covered in the workshop included the general in-vessel LWR severe accident phenomena, containment responses and performances under severe accident conditions, results of Level 1 PRAs of three Nuclear Power Plants at Taiwan, and also two lectures related to the NUREG-1150 report just published by US NRC. This presentation covers these two lectures.

More Details

Monitoring cables for local degradation

Bustard, Larry D.

Recent experiences in operating nuclear plants in the United States have demonstrated the need for an in situ cable condition monitoring technique that can assess whether installed, low-voltage, unshielded cables have local damage that could compromise their ability to function under normal and accident service conditions. This paper summarizes current US programs that have been initiated to develop a technological basis for monitoring cables with local degradation. 7 refs.

More Details

A simplified sizing and mass model for axial flow turbines

Hudson, S.L.

An axial flow turbine mass model has been developed and used to study axial flow turbines for space power systems. Hydrogen, helium-xenon, hydrogen-water vapor, air, and potassium vapor working fluids have been investigated to date. The impact of construction material, inlet temperature, rotational speed, pressure ratio, and power level on turbine mass and volume has been analyzed. This paper presents the turbine model description and results of parametric studies showing general design trends characteristic of any axial flow machine. Also, a comparison of axial flow turbine designs using helium-xenon mixtures and potassium vapor working fluids, which are used in Brayton and Rankine space power systems, respectively, is presented. 9 refs., 4 figs., 2 tabs.

More Details

An equation of state formulation for Hicks-Menzies FCI (fuel-coolant interaction) efficiencies

Cline, D.D.; Pong, L.T.; Beck, D.F.; Berman, M.

Energetic fuel-coolant interactions may occur in a nuclear reactor in the event that molten fuel comes in contact with the reactor coolant water. Reliable mechanistic models of these interactions have yet to be developed and so relatively simple thermodynamic models have been proposed for estimating the conversion of thermal energy to mechanical work. The present paper outlines a generalized thermodynamic model for fuel-coolant interactions which accounts for variable thermodynamic properties as well as the effect of latent heat in the fuel. The variable property model is shown to provide an upper bound (most conservative) estimate of the conversion efficiency compared to other formulations appearing in the literature. 7 refs., 5 figs.

More Details

Detonation of unconfined large scale fuel spray-air clouds

Benedick, W.B.

Unconfined heterogeneous two-phase detonations in liquid droplet-air mixtures are investigated. The liquid fuel is placed in a V-shaped channel and is dispersed into the atmosphere to form a cloud by an explosive detonating cord laid along the bottom vertex of the channel. An aerosol cloud 7 m high by about 1.5 m averaged width can be generated in this way with a typical mass ratio of fuel to explosive charge of 150. In the present study the length of channel used is typically 10 m giving a detonable fuel-air cloud of about 100 m/sup 3/. The propylene-oxide driver and the test fuel are disseminated simultaneously. Detonation in the propylene-oxide section is initiated by the sheet explosive and the detonation then transmits from this driver section into the rest of the cloud formed from the test fuel. For insensitive fuels requiring a larger cloud dimension, two parallel fuel troughs spaced 1.2 m apart are used. It is found that propylene-oxide and nitrated hydrocarbon fuels detonate quite readily. For the case of propylene-oxide, significant vaporization of the aerosol is observed prior to initiation so that detonation is essentially in the gas phase. 15 refs., 4 figs.

More Details

Materials analysis with nuclear microprobes: Superconductors and buried conductors

Barbour, J.C.

Nuclear microprobe analysis (NMA) is a unique form of microbeam analysis in that it combines high lateral resolution with the high depth resolution techniques of conventional ion beam analysis (IBA) to nondestructively determine sample composition in three dimensions. By using depth sensitive IBA techniques (e.g., Rutherford Backscattering Spectrometry (RBS), Enhanced Backscattering Spectrometry (EBS) or Elastic Recoil Detection (ERD)), NMA finds its greatest utility in analyses requiring the following information: (1) 1--100 ppM sensitivity, (2) nondestructive three-dimensional depth profiling, and (3) quantitative light element analysis (e.g., the first two rows of the periodic table). This paper demonstrates the continuing evolution of NMA capabilities through two examples. First, the unique capabilities afforded NMA are shown in a simple yet accurate method to measure both oxygen and metal atom concentrations in Y-Ba-Cu-O alloys with micro-area ion beam analysis. Second, a NMA of buried tungsten lines in a silicon wafer demonstrates the complementary nature of information determined by NMA and scanning electron microscopy (SEM). 9 refs., 2 figs.

More Details

The ASSESS Neutralization Analysis module

Paulus, W.K.

The ASSESS Neutralization Analysis module (Neutralization) is part of Analytic System and Software for Evaluation of Safeguards and Security, ASSESS, a vulnerability assessment tool. Neutralization models a fire fight engagement security inspectors (SIs) and adversaries. Results are based on probability of neutralization, P(N), which estimates the likelihood that SIs will win, given that SIs interrupt the attackers and begin an armed engagement. The calculating engine of the module is the Brief Adversary Threat Loss Estimator, BATLE. Engagements can have as many as thirty combatants on a side. Reinforcements may be introduced or combatant characteristics may be changed as many as ten times in one engagement. Inputs may be made with or without programmed guidance to the user. Combatant characteristics come from a modifiable library. Seven different characteristics can be independently specified for each combatant. Graphs of time distributions and studies of the sensitivity of P(N) to any combatant characteristic of either SIs or adversaries can be requested. Output files from Neutralization are used by Outsider Analysis to produce probability of security system win. 4 refs., 12 figs., 2 tabs.

More Details

The assess facility descriptor module

Jordan, S.E.; Winblad, A.; Key, B.; Walker, S.; Renis, T.; Saleh, R.

The Facility Descriptor (Facility) module is part of the Analytic System and Software for Evaluating Safeguards and Security (ASSESS). Facility is the foundational software application in the ASSESS system for modelling a nuclear facility's safeguards and security system to determine the effectiveness against theft of special nuclear material. The Facility module provides the tools for an analyst to define a complete description of a facility's physical protection system which can then be used by other ASSESS software modules to determine vulnerability to a spectrum of insider and outsider threats. The analyst can enter a comprehensive description of the protection system layout including all secured areas, target locations, and detailed safeguards specifications. An extensive safeguard component catalog provides the reference data for calculating delay and detection performance. Multiple target locations within the same physical area may be specified, and the facility may be defined for two different operational states such as dayshift and nightshift. 6 refs., 5 figs.

More Details

Addressing the insider threat through the use of a real time personnel and material tracking system

Trujillo, A.A.

Past experience in addressing the insider threat has led to the development of general principles for mitigating the insider threat while minimizing adverse impacts on site operations. Among the general principles developed was the requirement for real time tracking of personnel and material. A real time system for personnel and material tracking will aid in mitigating the insider threat by providing critical information regarding the movement and location of personnel and material. In addition, this system can provide an early detection mechanism for potential insider actions. This paper describes the development, operation, and performance of a technology-based system which utilizes radio frequency transmitters to achieve the real time tracking of personnel and material. The major elements of this system are a personnel tracking credential which cannot be removed from an authorized individual without an alarm being sounded, and a material control device which is utilized to control and monitor access to material. These elements form an insider protection system through the use of software which establishes the ''rules'' under which the system will operate. The performance of this system has been evaluated under both laboratory and operational settings in order to: (1) demonstrate the system's ability to successfully control access to material and areas by personnel, and (2) provide information regarding the status of materials in transit and storage. 3 refs., 1 fig.

More Details

Application of generic risk assessment software to radioactive waste disposal

Campbell, James E.

Monte Carlo methods are used in a variety of applications such as risk assessment, probabilistic safety assessment, and reliability analysis. While Monte Carlo methods are simple to use, their application can be laborious. A new microcomputer software package has been developed that substantially reduces the effort requires to conduct Monte Carlo analyses. The Sensitivity and Uncertainty Analysis Shell (SUNS) is a software shell in the sense that a wide variety of application model can be incorporated into it. SUNS offers several useful features including a menu-driven environment, a flexible input editor, both Monte Carlo and Latin Hypercube sampling, the ability to perform both repeated trials and parametric studies in a single run, and both statistical and graphical output. SUNS also performs all required file management functions. 9 refs., 6 figs., 1 tab.

More Details

Evaluation of waveform digitizer systems and components in accordance with IEEE waveform digitizer standards

Green, P.F.

Our division is charged with instrumentation development in support of underground testing. We find it necessary to be able to evaluate the performance of waveform digitizing systems with sampling rates from a few kilohertz to more than a gigahertz. We have been developing an integrated system which can provide quantitative results on the performance of systems and subsystems. Here we describe a system which is controlled by a Microvax II with instrumentation control through the IEEE-488 buss. The evaluation procedures are aimed at being consistent with a new Trial Waveform Digitizer Standard generated by the Waveform Measurements and Analysis committee appointed by the Instrumentation and Measurement Society of IEEE. This standard has been recently accepted by the IEEE and will be published in the next few months. Attention is given to the accurate measurement of effective-bit performance and differential nonlinearity of waveform digitizers. 3 refs., 14 figs.

More Details

Dynamics and static behavior of metal gussets in cask impact limiters

Yoshimura, Richard H.

Static and dynamic analyses of an impact limiter for a spent fuel cask have been performed using the finite element analysis code PRONTO2D (Taylor and Flanagan, 1987). The impact limiter contained wood as the energy absorbing material, with the wood confined by a cylindrical metal outer skin and sixteen metal stiffeners (gussets). The object of these analyses was to determine how the wood interacts with the metal stiffeners and to determine if the impact limiter would behave differently under static versus dynamic loading conditions. Originally, the metal gusset strength was assumed to be limited by the elastic buckling load. Further analysis showed that the gusset strength was not limited to the elastic buckling load and that each gusset contributed significantly to the impact limiter's strength. The current analyses investigated the strength of a flat plate or gusset used in impact limiter systems. 3 refs., 6 figs.

More Details

Two-dimensional phase correction of synthetic aperture radar imagery

Ghiglia, D.C.; Mastin, G.A.

A two-dimensional synthetic aperture radar (SAR) phase correction algorithm is described as a natural extension of a one-dimensional technique developed previously. It embodies many similarities to phase gradient speckle imaging and incorporates improvements in phase estimation. Diffraction limited performance has been obtained on actual SAR imagery regardless of scene content or phase error structure. The algorithm is computationally efficient, robust, and easily implemented on a general purpose computer or special purpose hardware. 13 refs., 1 fig.

More Details

High voltage considerations for Silicon-on-Insulator devices using porous silicon

Guilinger, Terry R.

We describe a Silicon-on-Insulator (SOI) structure for high voltage BICMOS uniquely suited to the use of porous silicon (PS). In this SOI structure, bulk, high speed bipolar devices are readily integrated with CMOS high voltage and logic devices (smart power). To investigate the processing compatibility of PS with this structure, we measured breakdown strength and etch rate of thermally treated PS in 7:1 buffered oxide etch (BOE) and determined that they can approach values typical of thermal silicon oxides/nitrides. 7 refs., 2 figs.

More Details

The solidification metallurgy of Alloy 718 and other Nb-containing superalloys

Cieslak, Michael J.

The solidification behavior of Alloy 718 and other Nb-bearing austenitic superalloys has been examined using an integrated analytical approach. All alloys of this type begin solidification with the formation of Nb-lean austenitic dendrites. Interdendritic eutectic-type solidification constituents involving MC-type carbides and a Nb-rich Laves phase occur in these alloys. The ..gamma../Laves eutectic constituent terminates solidification in these alloys. Nb is the dominant element in the evolution of solidification microstructure with C and Si affecting the amounts of ..gamma../MC and ..gamma../Laves constituent observed. Simple solidification models predict reasonably well the amount of eutectic constituent observed. 11 refs., 9 figs., 2 tabs.

More Details

Design of an advanced entry control system

Williams, J.D.

An entry control system (ECS) allows the movement of authorized personnel and material through normal routes while detecting and delaying movement of unauthorized personnel and contraband. This paper presents an overview of several unique design and operating principles used in the implementation of a positive identity entry control system utilizing proximity cards. The system design incorporates distributed processing to support geographically separated entry points and redundancy such that no single point failure will shut down operations. The functionality and integration of the photo identification system, the visitor authorization system, and the access control and contraband detection systems will be discussed. Systems unique features such as temporary badge issue for lost or forgotten badges at entry points using video lookup, visitor processing, and ergonomic and environmental considerations for the design of the proximity card based entry lane will be covered. 6 figs.

More Details

Effective implementation of safeguards and security requirements

Schumann, M.; Hofferth, L.J.; Trujillo, A.A.

Effective implementation of an insider protection program in light of the new directives can be accomplished through sound planning and a strong management commitment to meaningful improvements. Good planning, with a firm set of goals and objectives that have reasonable milestones, are essential elements in the effective implementation of new requirements. This paper describes a structured approach to achieving effective and acceptable program implementation.

More Details
Results 100701–100725 of 100,993
Results 100701–100725 of 100,993
Top