Publications

Results 97926–97950 of 100,993

Search results

Jump to search filters

ESD hazards associated with CO{sub 2} refrigeration

Jones, R.D.; Chen, K.C.; Holmes, S.W.

Apparent malfunctions of two Trajectory Sensing Signal Generators (TSSGs) were observed during B61-3/4/10 trajectory arming tests at the Pantex Weapons Evaluation Test Laboratory (WETL). On two subsequent occasions, the TSSG used in the B83 bomb developed single-channel failures during tests at WETL. It was concluded that the failures were related to the electrostatic discharge (ESD) hazard associated with the use of a Thermotron{reg_sign} liquid carbon dioxide (CO{sub 2}) refrigeration system. It was demonstrated that during temperature conditioning, the case of the TSSG can acquire a substantial electrostatic charge as a result of triboelectric processes. A series of tests was performed to identify the charging mechanisms associated with liquid CO{sub 2} refrigeration systems and a quantitative assessment of the ESD hazard was made. The conclusions and recommendations derived in these tests were summarized in a Significant Finding Investigations Closeout. The purpose of this report is to provide formal documentation for, and elaboration on, issues addressed in the Findings.

More Details

Measured responses of internal enclosures and cables due to burnthrough penetration of weapon cases by lightning

Schnetzer, G.H.; Fisher, R.J.; Dinallo, M.A.

The electrical effects of lightning penetration of the outer case of a weapon on internal structures, such as a firing set housing, and on samples of a flat, flexline detonator cable have been investigated experimentally. Maximum open-circuit voltages measured on either simulated structures (126 V) or the cable (46 V) located directly behind the point of penetration were well below any level that is foreseen to create a threat to nuclear safety. On the other hand, it was found that once full burnthrough of the barrier occurred, significant fractions of the incident continuing currents coupled to both the simulated internal structure (up to 300 A) or to the cable sample (69 A) when each was electrically connected internally to case ground. No occurrence was observed of the injection of large amplitude currents from return strokes occurring after barrier penetration. Under circumstances in which small volumes of trapped gases exist behind penetration sites, rapid heating of the gas by return strokes occurring after burnthrough has been shown to produced large mechanical impulses to the adjacent surfaces.

More Details

An evaluation of solid state video frame recorders

Terry, Preston L.

The Department of Energy (DOE) has tasked Sandia with conducting a market survey to identify and evaluate pertinent solid state recorders. This report identifies the chosen recorders and explains why they were selected. It details test procedures and provides the results of the evaluation. Our main focus in this evaluation was to determine whether the frame grabber altered signal quality. To determine the effect on the signal, we evaluated specific parameters: sensitivity, resolution, signal-to-noise ratio, and intrascene dynamic range. These factors were evaluated at the input and output of the frame grabber.

More Details

In situ permeable flow sensors at the Savannah River Integrated Demonstration: Phase 2 results

Ballard, Sanford

A suite of In Situ Permeable Flow Sensors was deployed at the site of the Savannah River Integrated Demonstration to monitor the interaction between the groundwater flow regime and air injected into the saturated subsurface through a horizontal well. One of the goals of the experiment was to determine if a groundwater circulation system was induced by the air injection process. The data suggest that no such circulation system was established, perhaps due to the heterogeneous nature of the sediments through which the injected gas has to travel. The steady state and transient groundwater flow patterns observed suggest that the injected air followed high permeability pathways from the injection well to the water table. The preferential pathways through the essentially horizontal impermeable layers appear to have been created by drilling activities at the site.

More Details

Principles and guidelines for diversity in teamwork

Berman, M.; Crespin, G.; Garcia, L.R.; Jansma, R.; Lovato, L.; Randall, G.; Sanchez, A.

As part of Sandia`s Corporate Diversity Program, a Diversity Action Team was assembled to study the impact of diversity on teamwork. We reviewed the available literature on successful teaming, both with homogeneous (more alike than different) and heterogeneous teams. Although many principles and guidelines for successful homogeneous teams also apply to diverse teams, we believe that a document concentrating on diverse teams will be useful both for Sandians and for the outside world.

More Details

A pollution prevention chargeback system at Sandia National Laboratories, New Mexico

Davis, R.; Fish, J.; Brown, C.

Sandia National Laboratories, New Mexico (Sandia/NM) has successfully developed and implemented a chargeback system to fund the implementation of Pollution Prevention activities. In the process of establishing this system, many valuable lessons have been learned. This paper describes how the chargeback system currently functions, the benefits and drawbacks of implementing such a system, and recommendations for implementing a chargeback system at other facilities. The initial goals in establishing a chargeback system were to create (1) funding for pollution prevention implementation, including specific pollution prevention projects; and (2) awareness on the part of the line organizations of the quantities and types of waste that they generate, thus providing them with a direct incentive to reduce that waste. The chargeback system inputs waste generation data and then filters and sorts the data to serve two purposes: (1) the operation of the chargeback system; and (2) the detailed waste generation reporting used for assessing processes and identifying pollution prevention opportunities.

More Details

Test results on direct containment heating by high-pressure melt ejection into the Surtsey vessel: The TDS test series

Allen, Mark S.

The Technology Development and Scoping (TDS) test series was conducted to test and develop instrumentation and procedures for performing steam-driven, high-pressure melt ejection (HPME) experiments at the Surtsey Test Facility to investigate direct containment heating (DCH). Seven experiments, designated TDS-1 through TDS-7, were performed in this test series. These experiments were conducted using similar initial conditions; the primary variable was the initial pressure in the Surtsey vessel. All experiments in this test series were performed with a steam driving gas pressure of {approx_equal} 4 MPa, 80 kg of lumina/iron/chromium thermite melt simulant, an initial hole diameter of 4.8 cm (which ablated to a final hole diameter of {approx_equal} 6 cm), and a 1/10th linear scale model of the Surry reactor cavity. The Surtsey vessel was purged with argon (<0.25 mol% O{sub 2}) to limit the recombination of hydrogen and oxygen, and gas grab samples were taken to measure the amount of hydrogen produced.

More Details

Stabilizing S.P.H. with conservative smoothing

Swegle, Jeffrey W.

There is an instability in certain S.P.H. (Smoothed Particle Hydrodynamics method) material dynamics computations. Evidence from analyses and experiments suggests that the instabilities in S.P.H. are not removable with artificial viscosities. However, the analysis shows that a type of conservative smoothing does remove the instability. Also, numerical experiments, on certain test problems, show that SPHCS, and S.P.H. code with conservative smoothing, compares well in accuracy with computations based on the von Neumann-Richtmyer method.

More Details

Nevada Test Site closure program

Shenk, D.P.

This report is a summary of the history, design and development, procurement, fabrication, installation and operation of the closures used as containment devices on underground nuclear tests at the Nevada Test Site. It also addresses the closure program mothball and start-up procedures. The Closure Program Document Index and equipment inventories, included as appendices, serve as location directories for future document reference and equipment use.

More Details

Particle beam fusion progress report for 1989

Sweeney, Mary A.

This report summarizes the progress on the pulsed power approach to inertial confinement fusion. In 1989, the authors achieved a proton focal intensity of 5 TW/cm{sup 2} on PBFA-II in a 15-cm-radius applied magnetic-field (applied-B) ion diode. This is an improvement by a factor of 4 compared to previous PBFA-II experiments. They completed development of the three-dimensional (3-D), electromagnetic, particle-in-cell code QUICKSILVER and obtained the first 3-D simulations of an applied-B ion diode. The simulations, together with analytic theory, suggest that control of electromagnetic instabilities could reduce ion divergence. In experiments using a lithium fluoride source, they delivered 26 kJ of lithium energy to the diode axis. Rutherford-scattered ion diagnostics have been developed and tested using a conical foil located inside the diode. They can now obtain energy density profiles by using range filters and recording ion images on nuclear track recording film. Timing uncertainties in power flow experiments on PBFA-II have been reduced by a factor of 5. They are investigating three plasma opening switches that use magnetic fields to control and confine the injected plasma. These new switches provide better power flow than the standard plasma erosion switch. Advanced pulsed-power fusion drivers will require extraction-geometry applied-B ion diodes. During this reporting period, progress was made in evaluating the generation, transport, and focus of multiple ion beams in an extraction geometry and in assessing the probable damage to a target chamber first wall.

More Details

Conservative smoothing versus artificial viscosity

Guenther, C.; Hicks, D.L.; Swegle, J.W.

This report was stimulated by some recent investigations of S.P.H. (Smoothed Particle Hydrodynamics method). Solid dynamics computations with S.P.H. show symptoms of instabilities which are not eliminated by artificial viscosities. Both analysis and experiment indicate that conservative smoothing eliminates the instabilities in S.P.H. computations which artificial viscosities cannot. Questions were raised as to whether conservative smoothing might smear solutions more than artificial viscosity. Conservative smoothing, properly used, can produce more accurate solutions than the von Neumann-Richtmyer-Landshoff artificial viscosity which has been the standard for many years. The authors illustrate this using the vNR scheme on a test problem with known exact solution involving a shock collision in an ideal gas. They show that the norms of the errors with conservative smoothing are significantly smaller than the norms of the errors with artificial viscosity.

More Details

Prosperity Games prototyping with the American Electronics Association, March 8--9, 1994

Berman, M.

Prosperity Games are an outgrowth and adaptation of move/countermove and seminar War Games. Prosperity Games are simulations that explore complex issues in a variety of areas including economics, politics, sociology, environment, education and research. These issues can be examined from a variety of perspectives ranging from a global, macroeconomic and geopolitical viewpoint down to the details of customer/supplier/market interactions in specific industries. All Prosperity Games are unique in that both the game format and the player contributions vary from game to game. This report documents the Prosperity Game conducted under the sponsorship of the American Electronics Association in conjunction with the Electronics Subcommittee of the Civilian Industrial Technology Committee of the National Science and Technology Council. Players were drawn from government, national laboratories, and universities, as well as from the electronics industry. The game explored policy changes that could enhance US competitiveness in the manufacturing of consumer electronics. Two teams simulated a presidentially appointed commission comprised of high-level representatives from government, industry, universities and national laboratories. A single team represented the foreign equivalent of this commission, formed to develop counter strategies for any changes in US policies. The deliberations and recommendations of these teams provide valuable insights as to the views of this diverse group of decision makers concerning policy changes, foreign competition, and the development, delivery and commercialization of new technologies.

More Details

Testing Technology: A Sandia technology bulletin

Goetsch, Robert S.

Inside this issue is a farewell to Testing Technology message from technical advisor, Ruth David. Also included are articles on: Testing the I-40 bridge over the Rio Grande, simulated reactor meltdown studies, an inexpensive monitor for testing integrated circuits, testing of antihelicoptor mines, and quality assurance on aircraft inspection.

More Details

Tonopah Test Range EGS graphics tracking display system: HP370

Meyer, R.H.; Bauhs, K.C.

This report describes the HP370 component of the Enhanced Graphics System (EGS) used at Tonopah Test Range (TTR). Selected Radar data is fed into the computer systems and the resulting tracking symbols are displayed on high-resolution video monitors in real time. These tracking symbols overlay background maps and are used for monitoring/controlling various flight vehicles. This report discusses both the operational aspects and the internal configuration of the HP370 Workstation portion of the EGS system.

More Details

Voltages across assembly joints due to direct-strike lightning currents

Fisher, R.J.

An extensive set of direct-strike lightning tests has been carried out on a set of facsimile assembly joints of the kinds employed in the design of nuclear weapon cases. Taken as a whole, the test hardware included all the conceptual design elements that are embodied, either singly or in combination, in any specific assembly joint incorporated into any stockpiled weapon. During the present testing, the effects of all key design parameters on the voltages developed across the interior of the joints were investigated under a range of lightning stroke current parameter values. Design parameter variations included the types and number of joint fasteners, mechanical preload, surface finish tolerance and coatings, and the material from which the joint assembly was fabricated. Variations of the simulated lightning stroke current included amplitude (30-, 100-, and 200-kA peak), rise time, and decay time. The maximum voltage observed on any of the test joints that incorporated proper metal-to-metal surface contact was 65 V. Typical response values were more on the order of 20 V. In order to assess the effect of the presence of a dielectric coating (either intentional or as a result of corrosion) between the mating surfaces of a joint, a special configuration was tested in which the mating parts of the test assembly were coated with a 1-mil-thick dielectric anodizing layer. First strokes to these test assemblies resulted in very narrow voltage spikes of amplitudes up to 900 V. The durations of these spikes were less than 0.1 {mu}s. However, beyond these initial spikes, the voltages typically had amplitudes of up to 400 V for durations of 3 to 5 {mu}s.

More Details

Development of concentrator solar cells

Ruby, Douglas S.

A limited pilot production run on PESC silicon solar cells for use at high concentrations (200 to 400 suns) is summarized. The front contact design of the cells was modified for operation without prismatic covers. The original objective of the contract was to systematically complete a process consolidation phase, in which all the, process improvements developed during the contract would be combined in a pilot production run. This pilot run was going to provide, a basis for estimating cell costs when produced at high throughput. Because of DOE funding limitations, the Photovoltaic Concentrator Initiative is on hold, and Applied Solar`s contract was operated at a low level of effort for most of 1993. The results obtained from the reduced scope pilot run showed the effects of discontinuous process optimization and characterization. However, the run provided valuable insight into the technical areas that can be optimized to achieve the original goals of the contract.

More Details

The numerical integration and 3-D finite element formulation of a viscoelastic model of glass

Chambers, Robert S.

The use of glasses is widespread in making hermetic, insulating seals for many electronic components. Flat panel displays and fiber optic connectors are other products utilizing glass as a structural element. When glass is cooled from sealing temperatures, residual stresses are generated due to mismatches in thermal shrinkage created by the dissimilar material properties of the adjoining materials. Because glass is such a brittle material at room temperature, tensile residual stresses must be kept small to ensure durability and avoid cracking. Although production designs and the required manufacturing process development can be deduced empirically, this is an expensive and time consuming process that does not necessarily lead to an optimal design. Agile manufacturing demands that analyses be used to reduce development costs and schedules by providing insight and guiding the design process through the development cycle. To make these gains, however, viscoelastic models of glass must be available along with the right tool to use them. A viscoelastic model of glass can be used to simulate the stress and volume relaxation that occurs at elevated temperatures as the molecular structure of the glass seeks to equilibrate to the state of the supercooled liquid. The substance of the numerical treatment needed to support the implementation of the model in a 3-D finite element program is presented herein. An accurate second-order, central difference integrator is proposed for the constitutive equations, and numerical solutions are compared to those obtained with other integrators. Inherent convergence problems are reviewed and fixes are described. The resulting algorithms are generally applicable to the broad class of viscoelastic material models. First-order error estimates are used as a basis for developing a scheme for automatic time step controls, and several demonstration problems are presented to illustrate the performance of the methodology.

More Details

Zeroing in on requirements: Sandia National Laboratories` approach to meaningful program improvement

Richards, Robert R.

The necessity to evaluate our participant Quality Assurance (QA) Program for the Yucca Mountain Site Characterization Project (YMP) against the Office of Civilian Radioactive Waste Management (OCRWM) Quality Assurance Requirements and Description (QARD) issued December 1992, presented an opportunity to improve the QA Program. For some time, the SNL YMP technical staff had complained that the QA requirements imposed on their work were cumbersome and inhibited their ability to perform investigations using scientific methods. There was some truth to this, since SNL had over the years developed some procedures with many detailed controls that were far beyond what was required by project QA requirements. This had occurred either as a result of responding to numerous audit findings with a ``make the auditor happy`` attitude or with an attempt to cover every contingency. Procedures affecting scientific work were authored by the technical staff in an effort to provide them with ownership of the process; unfortunately, there were problems. Procedures were inconsistent because of the varied writing styles and differing perceptions of the degree of QA controls required to implement the program. It was extremely difficult to get all of the technical staff to accept the QA program as it was intended. These issues were endemic to the program and resulted in the QARD, the actual requirements, being written by a team of QA professionals. Once new QARD requirements were issued, an opportunity to evaluate the QA Program and to revise it not only to meet the QARD, but also to make it more plausible and meaningful to the technical staff, was presented. The discussion that follows will describe how the program was changed, will present both the positive and negative experiences observed by SNL personnel during the QARD transition, and will provide some recommendations.

More Details

The effect of stratigraphic uncertainty on repository performance

Wilson, Michael L.

One source of uncertainty in calculating radionuclide releases from a potential radioactive-waste at Yucca Mountain, Nevada, is uncertainty in the unsaturated-zone stratigraphy. Uncertainty stratigraphy results from sparse drillhole data; possible variations in stratigraphy are modeled using the geostatistical method of indicator simulation. One-dimensional stratigraphic columns are generated and used for calculations of groundwater flow and radionuclide transport. There are indications of a dependence of release on hydrogeologic-unit thicknesses, but the resulting variation in release is smaller than variations produced by other sources of uncertainty.

More Details

Laboratory measurements of frictional slip on interfaces in a polycarbonate rock mass model

Brown, S.R.

The evaluation of the stability of the openings for the Exploratory Studies Facility and a potential repository for high-level nuclear waste at Yucca Mountain, Nevada will require computer codes capable of predicting slip on rock joints resulting from changes in thermal stresses. The geometrical method of analysis of moire fringe analysis was used to evaluate the magnitude and extent of frictional sliding in a layered polycarbonate rock mass model containing a circular hole. Slips were observed in confined zones around the hole and micron resolutions were obtained. Unpredicted and uncontrolled uniform slip of several interfaces in the model were observed giving considerable uncertainty in the boundary conditions of the model, perhaps making detailed comparison with numerical models impossible.

More Details

Geometric moire method of strain analysis with displacement discontinuities; Yucca Mountain Site Characterization Project

Brown, S.R.

Prediction of the deformation behavior of large engineering structures in jointed rock under a specified loading history requires the extensive use of numerical simulation. For example, the evaluation of the stability of the openings for the Exploratory Studies Facility and a potential repository for high-level nuclear waste at Yucca Mountain, Nevada will require computer codes capable of predicting slip on rock joints resulting from changes in thermal stresses. The testing and ultimate validation of these complex finite element computer codes is an important step in their development before their use as a design tool for an engineering structure or for the study of some other practical problem. While field tests may be ultimately necessary, the authors propose a different and more thorough approach where early tests are done on a bench scale with easily characterized materials and geometries. For these bench-scale tests, the basic approach is to construct a laboratory specimen with a known geometry from an easily characterized material. Digital video imaging combined with the geometric moire fringe method of strain analysis is used to measure and derive the displacements on the sample under load. Here the authors present the method of acquiring and analyzing the moire data and give an analysis of its problems and benefits.

More Details

Gunfire characterization and simulation using temporal moments

Smallwood, David O.

The concept of band-limited temporal moments is briefly reviewed. An input-output relationship for the band-limited product model is derived. The band-limited product model is then used to characterize and simulate a gunfire record in the following manner. An ensemble of 50 gunfire rounds are averaged to determine the mean response. The mean is subtracted from the original record and the remaining signal is characterized using a smoothed mean square response of the signal filtered into contiguous bandwidths. This operation preserves the lower bandlimited temporal moments of the original data. This smoothed mean square response was used as the deterministic window for the product model. The power spectrum of the response with the mean removed is used to estimate the spectrum for the random part a product model. An additional step varied the repetition rate in a random manner of the simulated gunfire rounds to match the original record in a statistical sense.

More Details

Building a bridge with the customer to facilitate collecting and validating information in modeling sessions

Eaton, Shelley M.

To build a bridge with customers, we balance the linear modeling process with the dynamics of the individuals we serve, who may feel unfamiliar, even confused, with that process. While it is recognized that human factors engineers improve the physical aspect of the workplace, they also work to integrate customers` cognitive styles, feelings, and concerns into the workplace tools. We take customers` feelings into consideration and integrate their expressed needs and concerns into the modeling sessions. After establishing an agreeable, professional relationship, we use a simple, portable CASE tool to reveal the effectiveness of NIAM. This tool, Modeler`s Assistant, is friendly enough to use directly with people who know nothing of NIAM, yet it captures all the information necessary to create complete models. The Modeler`s Assistant succeeds because it organizes the detailed information in an enhanced text format for customer validation. Customer cooperation results from our modeling sessions as they grow comfortable and become enthused about providing information.

More Details

Burnup Verification Tests with the FORK Measurement System-Implementation for Burnup Credit

Ewing, Ronald I.

Verification measurements may be used to help ensure nuclear criticality safety when burnup credit is applied to spent fuel transport and storage systems. The FORK system measures the passive neutron and gamma-ray emission from spent fuel assemblies while in the storage pool. It was designed at Los Alamos National Laboratory for the International Atomic Energy Agency safeguards program and is well suited to verify burnup and cooling time records at commercial Pressurized Water Reactor (PWR) sites. This report deals with the application of the FORK system to burnup credit operations.

More Details
Results 97926–97950 of 100,993
Results 97926–97950 of 100,993
Top