Publications

Results 97676–97700 of 100,993

Search results

Jump to search filters

Reliability assessment of underground shaft closure

Munson, Darrell E.

The intent of the WIPP, being constructed in the bedded geologic salt deposits of Southeastern New Mexico, is to provide the technological basis for the safe disposal of radioactive Transuranic (TRU) wastes generated by the defense programs of the United States. In determining this technological basis, advanced reliability and structural analysis techniques are used to determine the probability of time-to-closure of a hypothetical underground shaft located in an argillaceous salt formation and filled with compacted crushed salt. Before being filled with crushed salt for sealing, the shaft provides access to an underground facility. Reliable closure of the shaft depends upon the sealing of the shaft through creep closure and recompaction of crushed backfill. Appropriate methods are demonstrated to calculate cumulative distribution functions of the closure based on laboratory determined random variable uncertainty in salt creep properties.

More Details

Leadership -- It`s everybody`s business

Kane, A.J.

In a time when many companies are trying to find a way to do more with less, they are missing the ``solution`` that is right before their eyes. Rather than trying to decide on whether to reengineer or process improve, they should be focused on their most valuable resource: people. This paper discusses the elements of leadership and how it applies to all individuals in an organization. To get outstanding results from people, they need to begin by making leadership everybody`s business.

More Details

Tax barriers to solar central receiver generation technology

Reilly, Hugh E.

Tax loads and required revenues are estimated for current and future solar central receiver and gas-fired plants competing in the same market. An economic measure of tax equity is used to evaluate the equity of the tax loads under past and present tax codes. The same measure is used to devise a tax strategy which produces the following two types of equitable taxation: (1) the two plants carry nearly equal tax loads, and (2) local, state and federal governments receive the same distribution of revenues from the solar plant as from the gas-fired plant `Me results show that central receivers (and likely other capital-intensive technologies) carry higher tax loads compared to competing gasfired generation, that tax loads are highly correlated with competitiveness, and that equitable taxation is feasible within the boundaries of the study.

More Details

Recent results on the optical performance of solar two heliostats

Jones, Scott A.

Recent Sandia support of the Solar Two project has included the analysis of optical performance issues related to heliostat field improvements. Two types of heliostats will be used for the Solar Two project: The 1818 original 38.4 m{sup 2} Martin Marietta Co. heliostats, and 108 new 95 m{sup 2} Lugo heliostats. Carrisa Plains mirror modules will be used to construct the Lugo heliostats and refurbish original heliostats. Baseline, clean reflectivity measurements of 0.90 and 0.94 are recomended for the original heliostat and the Carrisa Plains modules, respectively. Sandia`s Beam Characterization System provided beam quality information for representative configurations of both heliostats. This showed that the replacement of two facets with Carrisa Plains modules on an original heliostat led to a slight increase in spillage, but also increased beam power. As expected, the large beam of the Lugo heliostat showed poorer beam quality and significant spillage, but proved to be an economical addition of reflective area. The Carrisa Plains modules were found to be nominally flat, although the focal length changed slightly with temperature. An analysis of the canting options for both types of heliostats was performed. It was recommended the original heliostats be canted with an on-axis, lookback method, whereas a two-step method using first on-, then off-axis approaches was recommended for the Lugo heliostats. Finally, measurements performed at the Daggett site showed that despite the 1992 Landers earthquake, heliostat pedestal tilt and the associated tracking errors are expected to be within acceptable limits.

More Details

Felt-metal-wick heat-pipe solar receiver

Andraka, Charles E.

Reflux heat-pipe receivers have been identified as a desirable interface to couple a Stirling-cycle engine with a parabolic dish solar concentrator. The reflux receiver provides power nearly isothermally to the engine heater heads while decoupling the heater head design from the solar absorber surface design. The independent design of the receiver and engine heater head leads to higher system efficiency. Heat pipe reflux receivers have been demonstrated at approximately 65 kW{sub t} power throughput. Several 25 to 30-kW{sub e} Stirling-cycle engines are under development, and will soon be incorporated in commercial dish-Stirling systems. These engines will require reflux receivers with power throughput limits reaching 90-kW{sub t}. The extension of heat pipe technology from 60 kW{sub t} to 100 kW{sub t} is not trivial. Current heat pipe wick technology is pushed to its limits. It is necessary to develop and test advanced wick structure technologies to perform this task. Sandia has developed and begun testing a Bekaert Corporation felt metal wick structure fabricated by Porous Metal Products Inc. This wick is about 95% porous, and has liquid permeability a factor of 2 to 8 times higher than conventional technologies for a given maximum pore radius. The wick has been successfully demonstrated in a bench-scale heat pipe, and a full-scale on-sun receiver has been fabricated. This report details the wick design, characterization and installation into a heat pipe receiver, and the results of the bench-scale tests are presented. The wick performance is modeled, and the model results are compared to test results.

More Details

Ecological risk assessment benefits environmental management

Turnley, Jessica G.

The ecological risk assessment process in its ideal form is an unbiased approach for assessing the probability of harm to the environment as a consequence of a given action. This information can then be combined with other societal values and biases in the management of such risks. However, as the process currently is understood, decision makers often are accused of manipulating information in order to generate decisions or achieve buy in from the public in support of a particular political agenda. A clear understanding of the nature of the risk management process can help define areas where information should be free from social or personal bias, and areas where values and judgments are critical. The authors do not propose to discuss the individual`s decision-making process, but rather to address the social process of risk communication and environmentally-related decision-making, identifying which parts of that process require bias-free, scientifically generated information about the consequences of various actions and which parts need an understanding of the social values which underlie the informed choices among those possible actions.

More Details

Mass transport through polycrystalline microstructures

Swiler, T.P.; Holm, E.A.; Young, M.F.; Wright, S.A.

Mass transport properties are important in polycrystalline materials used as protective films. Traditionally, such properties have been studied by examining model polycrystalline structures, such as a regular array of straight grain boundaries. However, these models do not account for a number of features of real grain ensembles, including the grain size distribution and variations in grain shape. In this study, a finite difference scheme is developed to study transient and steady-state mass transport through realistic two dimensional polycrystalline microstructures. Comparisons with the transport properties of traditional model microstructures provide regimes of applicability of such models. The effects of microstructural parameters such as average grain size are examined.

More Details

Physical and Chemical Sciences Center: Research briefs. Volume 9-94

Vook, F.L.; Samara, G.A.

As Sandia National Laboratories and the Physical and Chemical Sciences Center develop an increasingly diverse set of customers, research partners, and Cooperative Research and Development Agreements (CRADA`s) with industry, there is a need for providing more concise information describing the technical achievements and capabilities. This publication, Research Briefs, is designed to inform the present and potential partners in research and technology advancement. The research emphasizes semiconductor physics, electronic materials, surface physics and chemistry, plasma and chemical processing sciences, lasers and optics, vision science, ion-solid interactions and defect physics, and advanced materials physics. The specific programs pursued are driven by the research goals which are greatly influenced by interactions with the government and industrial customers.

More Details

Micro heat spreader enhanced heat transfer in MCMs

Shen, D.S.

The peak thermal power generated in microelectronics assemblies has risen from less than 1 W/cm{sup 2} in 1980 to greater than 40 W/cm{sup 2} today, due primarily to increasing densities at both the IC and packaging levels. The authors have demonstrated enhanced heat transfer in a prototype Si substrate with a backside micro heat channel structure. Unlike conventional micro heat pipes, these channels are biaxial with a greater capacity for fluid transfer. Thermal modeling and preliminary experiments have shown an equivalent increase in substrate thermal conductivity to over 500 W/m{center_dot}K, or a four times improvement. Optimization of the structure and alternative liquids will further increase the thermal conductivity of the micro heat channel substrate with the objective being polycrystalline diamond, or about 1,200 W/m{center_dot}K. The crucial design parameters for the micro heat channel system and the thermal characteristics of the system will be covered.

More Details

Supai salt karst features: Holbrook Basin, Arizona

Neal, J.T.

More than 300 sinkholes, fissures, depressions, and other collapse features occur along a 70 km (45 mi) dissolution front of the Permian Supai Formation, dipping northward into the Holbrook Basin, also called the Supai Salt Basin. The dissolution front is essentially coincident with the so-called Holbrook Anticline showing local dip reversal; rather than being of tectonic origin, this feature is likely a subsidence-induced monoclinal flexure caused by the northward migrating dissolution front. Three major areas are identified with distinctive attributes: (1) The Sinks, 10 km WNW of Snowflake, containing some 200 sinkholes up to 200 m diameter and 50 m depth, and joint controlled fissures and fissure-sinks; (2) Dry Lake Valley and contiguous areas containing large collapse fissures and sinkholes in jointed Coconino sandstone, some of which drained more than 50 acre-feet ({approximately}6 {times} 10{sup 4} m{sup 3}) of water overnight; and (3) the McCauley Sinks, a localized group of about 40 sinkholes 15 km SE of Winslow along Chevelon Creek, some showing essentially rectangular jointing in the surficial Coconino Formation. Similar salt karst features also occur between these three major areas. The range of features in Supai salt are distinctive, yet similar to those in other evaporate basins. The wide variety of dissolution/collapse features range in development from incipient surface expression to mature and old age. The features began forming at least by Pliocene time and continue to the present, with recent changes reportedly observed and verified on airphotos with 20 year repetition. The evaporate sequence along interstate transportation routes creates a strategic location for underground LPG storage in leached caverns. The existing 11 cavern field at Adamana is safely located about 25 miles away from the dissolution front, but further expansion initiatives will require thorough engineering evaluation.

More Details

Neutron diffraction studies on recrystallization of solution derived lead zirconate titanates

Morosin, Bruno W.

We performed neutron powder diffraction on solution-derived lead zirconate titanates (PZT). Three compositions, PZT 45/55, PZT 20/80 and PbTiO{sub 3}, were investigated. The materials were annealed so that the perovskite phase had just begun to grow from the precursor phase. In our materials this precursor phase is the pyrochlore rather than fluorite phase. The results show that in the pyrochlore phase, the (Ti,Zr) and the Pb are ordered in their crystallographic sites while the O are essentially disordered in both of the two usual pyrochlore anion sites.

More Details

Processing and properties of chromate-free conversion coatings on aluminum

Buchheit, R.G.; Drewien, C.A.; Martinez, M.A.; Stoner, G.E.

A conversion coating method has been developed based on precipitation of Li{sub 2}[Al{sub 2}(OH){sub 6}]{sub 2}{center_dot}CO{sub 3}{center_dot}3H{sub 2}O from alkaline lithium salt solutions. The process is procedurally similar to chromate conversion coating but does not use or produce hazardous chemicals. The coating that forms is polycrystalline, continuous and conformal. The coating meets the MIL-C-5541E corrosion resistance, electrical contact resistance and paint adhesion requirements for certain aluminum alloys, but does not match the levels of performance exhibited by chromate conversion coatings. In this paper, methods for producing the coating are described. Corrosion resistance has been characterized using electrochemical impedance spectroscopy and salt spray exposure. The structural, compositional and property changes attending post-coating thermal exposure are discussed. Performance in standardized corrosion, electrical and paint adhesion tests is also presented.

More Details

Porosity in hexylene-bridged polysilsesquioxanes: Effects of monomer concentration

Loy, Douglas A.

Hexylene-bridged polysilsesquioxanes can be prepared as mesoporous or non-porous xerogels simply by switching from basic to acidic polymerization conditions. In this study, we looked at the effect of monomer concentration on porosity of hexylene-bridged xerogels prepared under acidic and basic conditions. 1, 6-Hexylene-bridged polysilsesquioxanes were prepared by sol-gel polymerizations of 1, 6-bis(triethoxysilyl)hexane 1 with concentrations between 0. 1 to 1.2 M in ethanol. Gelation times ranged from seconds for 1.2 M concentration to months for 0.2 M. The gels were processed into xerogels by an aqueous work-up and the dry gels characterized by scanning electron microscopy (SEM), solid state {sup 13}C and {sup 29}Si CP MAS NMR spectroscopy, and gas sorption porosimetry.

More Details

Comparison of bridged polysilsesquioxane xerogels prepared from methoxy- and ethoxy-silyl monomers

Loy, Douglas A.

Hydrocarbon-bridged polysilsesquioxanes are prepared by the sol-gel polymerization of monomers with more than one trialkoxysilyl group attached directly to the bridging group by Si-C bonds. While the effects of varying the identity of the bridging group (length, rigidity, etc.), monomer concentration, and type of catalyst have been studied, the effect of different alkoxy ligands on the silicon atoms has not been investigated. For this study, 1, 6-- bis(triethoxysilyl)hexane 1 and 1, 6-bis(trimethoxysilyl)hexane 2 were polymerized under acidic and basic conditions in ethanol and methanol, respectively, and in tetrahydrofuran (THF). The resulting gels were processed to afford xerogels that were characterized by SEM, solid state {sup 13}C and {sup 29}Si Cross Polarization Magic Angle Spinning (CP MAS) NMR spectroscopy, and nitrogen sorption porosimetry.

More Details

Flat panel display development activities at Sandia National Laboratories

Dibello, E.G.

The flat panel display development activities underway at Sandia National Laboratories are described. Research is being conducted in the areas of glass substrates, phosphors, large area processes, and electron emissions. Projects are focused on improving process yield, developing large area processes, and using modeling techniques to predict design performance.

More Details

I{sub DDQ} Testing and Defect Classes: A Tutorial

Soden, Jerry M.

I{sub DDQ} testing of CMOSICs is a technique for production quality and reliability improvement, design validation, and failure analysis. The origin and basic concepts of I{sub DDQ} testing are reviewed. The relationship of I{sub DDQ} testing to other test methods is considered in the context of the whole IC life cycle from design, fabrication, and test through end use. A comprehensive test strategy is described that uses defect classes based on defect electrical properties rather than traditional fault models.

More Details

Graph certificates, lookahead in dynamic graph problems, and assembly planning in robotics

Wilson, Rodney K.

Despite intensive efforts in the area of dynamic graph algorithms, no efficient algorithms are known for the dynamic versions of some basic graph problems such as strong connectivity and transitive closure. We provide some explanation for this lack of success by presenting quadratic lower bounds on the strong certificate complexity of such problems, thereby establishing the inapplicability of the only known general technique for designing dynamic graph algorithms, viz., sparsification. These results also provide evidence of the inherent intractability of such dynamic graph problems. Some of our results are based on a general technique for obtaining lower bounds on the strong certificate complexity for a class of graph properties by establishing a relationship with the witness complexity. In many real applications of dynamic graph problems, a certain amount of lookahead is available. Specifically, we consider the problems of assembly planning in robotics and the maintenance of relations in databases which, respectively, give rise to dynamic strong connectivity and transitive closure. We exploit the (naturally available) lookahead in these two applications to circumvent the inherent complexity of the dynamic graph problems. We propose a variant of sparsification, viz., lookahead based sparsification, and apply it to obtain the first efficient fully dynamic algorithms for strong connectivity and transitive closure.

More Details

Photocatalysis for the destruction of aqueous TNT, RDX, and HMX

Showalter, Steven K.

The photo-destruction of the high explosives HMX, RDX and TNT was investigated using two systems (ozone versus titanium dioxide), two reactors (pot vs annular reactor), and two types of lamps (1000 Watt Hg-Xe vs 25 Watt LP Hg). A mass balance was performed on reactions executed under pseudo-solar conditions, and relative reaction rates and products were compared for ozone and titanium dioxide based processes. The ratios of relative product formation is also discussed. Results show that there was little difference in the reactions performed in the annular reactor when either ozone or titanium oxide were used. The chemistry of RDX and HMX are very similar, as expected. Future work involving the mechanism is also discussed.

More Details

The unusual properties of beryllium surfaces

Feibelman, Peter J.

Be is a ``marginal metal.`` The stable phase, hcp-Be, has a low Fermi-level density of states and very anisotropic structural and elastic properties, similar to a semiconductor`s. At the Be(0001) surface, surface states drastically increase the Fermi-level density of states. The different nature of bonding in bulk-Be and at the Be(0001) surface explains the large outward relaxation. The presence of surface states causes large surface core-level shifts by inducing a higher electrostatic potential in the surface layers and by improving the screening at the surface. The authors experimental and theoretical investigations of atomic vibrations at the Be(0001) surface demonstrate clearly that Be screening of atomic motion by the surface states makes the surface phonon dispersion fundamentally different from that of the bulk. Properties of Be(0001) are so different from those of the bulk that the surface can be considered a new ``phase`` of beryllium with unique electronic and structural characteristics. For comparison they also study Be(11{bar 2}0), a very open surface without important surface states. Be(11{bar 2}0) is the only clean s-p metal surface known to reconstruct (1 {times} 3 missing row reconstruction).

More Details

Aspects of macroscopic phase separation and interstitial oxygen ordering in oxygen doped La{sub 2}CuO{sub 4+{delta}}

Schirber, J.E.

NMR and neutron diffraction measurements reveal that macroscopic phase separation and the tetragonal to orthorhombic (TO) structural phase coincide at two distinct points in the temperature-doping phase plot for oxygen doped La{sub 2}CuO{sub 4+{delta}}. Thus the TO phase line coincides with the phase separation line. This is evidence that the macroscopic phase separation is inhibited in the tetragonal phase. We propose that the interstitial oxygen has higher mobility in the orthorhombic phase and that insufficient mobility suppresses macroscopic phase separation in the tetragonal phase. Neutron diffraction measurements also reveal superlattice peaks which indicate ordering of the interstitial oxygen. Our NMR measurements, have demonstrated a distribution of tilts of the CuO{sub 6} octahedra. We propose a sawtooth modulation of the octahedral tilt in which the sign of the tilt changes when the tilt reaches a maximum value can explain this distribution. The large openings in the La-O layer resulting from the abrupt switch of the sign of the tilt provide an attractive location for the interstitial oxygen. This mechanism would lead to stripe ordering of the interstitial oxygen.

More Details

Variability of the physical properties of tuff at Yucca Mountain, NV

Price, Ronald H.

Lateral and vertical variabilities in the bulk and mechanical properties of silicic volcanic tuff at the potential nuclear waste repository site in Yucca Mountain, NV have been evaluated. Laboratory measurements have been performed on tuff specimens recovered from boreholes located to support the design of the Exploratory Studies Facility/North Ramp. The data include dry and saturated bulk densities, average grain density, porosity, compressional and shear wave velocities, elastic moduli, and compressional and tensional fracture strengths. Data from eight boreholes aligned in a northwest-southeast direction have been collected under the required quality assurance program. Three boreholes have penetrated the potential repository horizon. The information collected provides for an accurate appraisal of the variability of rock properties in the vicinity of the boreholes. As expected, there is substantial variability in the bulk and mechanical properties of the tuff with depth (lithology). This is due to variations in gross characteristics of the tuffs (e.g., cooling units, mode of deposition, etc.), as well as smaller scale features (welding, porosity, and internal structures) that have developed as a result of depositional and post-depositional mechanisms. An evaluation of the lateral variability in bulk and mechanical properties is somewhat limited, at this time, due to a lack of borehole control to the north and south (parallel to the depositional flow direction). Initial observations indicate that there is minimal lateral variability within lithologic units. There are observable differences however, that can be related to variability in specific properties (e.g., porosity, and internal structures).

More Details

Degradation of blue AlGaN/InGaN/GaN LEDs subjected to high current pulses

Barton, Daniel L.

Short-wavelength, visible-light emitting optoelectronic devices are needed for a wide range of commercial applications, including high-density optical data storage, full-color displays, and underwater communications. In 1994, high-brightness blue LEDs based on gallium nitride and related compounds (InGaN/AlGaN) were introduced by Nichia Chemical Industries. The Nichia diodes are 100 times brighter than the previously available SiC blue LEDs. Group-III nitrides combine a wide, direct bandgap with refractory properties and high physical strength. So far, no studies of degradation of GaN based LEDs have been reported. The authors study, reported in this paper, focuses on the performance of GaN LEDs under high electrical stress conditions. Their observations indicate that, in spite of a high defect density, which normally would have been fatal to other III-V devices, defects in group-III nitrides are not mobile even under high electrical stress. Defect tubes, however, can offer a preferential path for contact metals to electromigrate towards the p-n junction, eventually resulting in a short. The proposed mechanism of GaN diode degradation raises concern for prospects of reliable lasers in the group-III nitrides grown on sapphire.

More Details

All wind farm uncertainty is not the same: The economics of common versus independent causes

Veers, Paul S.

There is uncertainty in the performance of wind energy installations due to unknowns in the local wind environment, machine response to the environment, and the durability of materials. Some of the unknowns are inherently independent from machine to machine while other uncertainties are common to the entire fleet equally. The FAROW computer software for fatigue and reliability of wind turbines is used to calculate the probability of component failure due to a combination of all sources of uncertainty. Although the total probability of component failure due to all effects is sometimes interpreted as the percentage of components likely to fail, this perception is often far from correct. Different amounts of common versus independent uncertainty are reflected in economic risk due to either high probabilities that a small percentage of the fleet will experience problems or low probabilities that the entire fleet will have problems. The average, or expected cost is the same as would be calculated by combining all sources of uncertainty, but the risk to the fleet may be quite different in nature. Present values of replacement costs are compared for two examples reflecting different stages in the design and development process. Results emphasize that an engineering effort to test and evaluate the design assumptions is necessary to advance a design from the high uncertainty of the conceptual stages to the lower uncertainty of a well engineered and tested machine.

More Details

Recent progress in the photovoltaic manufacturing technology project (PVMaT)

Ruby, Douglas S.

The Photovoltaic Manufacturing Technology (PVMaT) Project was initiated in 1990 to help the US photovoltaic (PV) industry extend its world leadership role in manufacturing and commercially developing PV modules and systems. It is being conducted in several phases, staggered to support industry progress. The four most recently awarded subcontracts (Phase 2B) are now completing their first year of research. They include two subcontracts on CdTe, one on Spheral Solar[trademark] Cells, and one on cast polysilicon. These subcontracts represent new technology additions to the PVMaT Project. Subcontracts initiated in earlier phases are nearing completion, and their progress is summarized. An additional phase of PVMaT, Phase 4A, is being initiated which will emphasize product-driven manufacturing research and development. The intention of Phase 4A is to emphasize improvement and cost reduction in the manufacture of full-system PV products. The work areas may include, but are not limited to, issues such as improvement of module manufacturing processes; system and system component packaging, integration, manufacturing, and assembly; product manufacturing flexibility; and balance-of-system development with the goal of product manufacturing improvements.

More Details
Results 97676–97700 of 100,993
Results 97676–97700 of 100,993
Top