Publications

Results 96351–96375 of 100,993

Search results

Jump to search filters

Slimholes for geothermal reservoir evaluation - An overview

Hickox, C.E.

The topics covered in this session include: slimhole testing and data acquisition, theoretical and numerical models for slimholes, and an overview of the analysis of slimhole data acquired by the Japanese. The fundamental issues discussed are concerned with assessing the efficacy of slimhole testing for the evaluation of geothermal reservoirs. the term reservoir evaluation is here taken to mean the assessment of the potential of the geothermal reservoir for the profitable production of electrical power. As an introduction to the subsequent presentations and discussions, a brief summary of the more important aspects of the use of slimholes in reservoir evaluation is given.

More Details

The ATM conversion at Sandia National Laboratories

Brenkosh, Joseph P.

Converting a large, heterogeneous, networked, environment to ATM (Asynchronous Transfer Mode) can yield many benefits. Before these benefits can be reaped, however, numerous decisions must be made and implemented. This paper presents a case study which describes the steps that were necessary to convert a backbone network at Sandia National Laboratories in Albuquerque, New Mexico to ATM. It presents each step by explaining its importance and what options were considered along with their tradeoffs. It is hoped that organizations contemplating converting to ATM will have a better understanding of how the transition is implemented after reading this paper.

More Details

The waveform correlation event detection system project, Phase I: Issues in prototype development and testing

Young, Christopher J.

A study using long-period seismic data showed that seismic events can be detected and located based on correlations of processed waveform profiles with the profile expected for an event. In this technique both time and space are discretized and events are found by forming profiles and calculating correlations for all time-distance points. events are declared at points with large correlations. In the first phase of the Waveform Correlation Event Detection System (WCEDS) Project at Sandia Labs we have developed a prototype automatic event detection system based on Shearer`s work which shows promise for treaty monitoring applications. Many modifications have been made to meet the requirements of the monitoring environment. A new full matrix multiplication has been developed which can reduce the number of computations needed for the data correlation by as much as two orders of magnitude for large grids. New methodology has also been developed to deal with the problems caused by false correlations (sidelobes) generated during the correlation process. When an event has been detected, masking matrices are set up which will mask all correlation sidelobes due to the event, allowing other events with intermingled phases to be found. This process is repeated until a detection threshold is reached. The system was tested on one hour of Incorporated Research Institutions for Seismology (IRIS) broadband data and built all 4 of the events listed in the National Earthquake Information Center (NEIC) Preliminary Determination of Epicenters (PDE) which were observable by the IRIS network. A continuous execution scheme has been developed for the system but has not yet been implemented. Improvements to the efficiency of the code are in various stages of development. Many refinements would have to be made to the system before it could be used as part of an actual monitoring system, but at this stage we know of no clear barriers which would prevent an eventual implementation of the system.

More Details

Advanced computer techniques for inverse modeling of electric current in cardiac tissue

Hutchinson, Scott A.

For many years, ECG`s and vector cardiograms have been the tools of choice for non-invasive diagnosis of cardiac conduction problems, such as found in reentrant tachycardia or Wolff-Parkinson-White (WPW) syndrome. Through skillful analysis of these skin-surface measurements of cardiac generated electric currents, a physician can deduce the general location of heart conduction irregularities. Using a combination of high-fidelity geometry modeling, advanced mathematical algorithms and massively parallel computing, Sandia`s approach would provide much more accurate information and thus allow the physician to pinpoint the source of an arrhythmia or abnormal conduction pathway.

More Details

MIG version 0.0 model interface guidelines: Rules to accelerate installation of numerical models into any compliant parent code

Brannon, Rebecca M.

A set of model interface guidelines, called MIG, is presented as a means by which any compliant numerical material model can be rapidly installed into any parent code without having to modify the model subroutines. Here, {open_quotes}model{close_quotes} usually means a material model such as one that computes stress as a function of strain, though the term may be extended to any numerical operation. {open_quotes}Parent code{close_quotes} means a hydrocode, finite element code, etc. which uses the model and enforces, say, the fundamental laws of motion and thermodynamics. MIG requires the model developer (who creates the model package) to specify model needs in a standardized but flexible way. MIG includes a dictionary of technical terms that allows developers and parent code architects to share a common vocabulary when specifying field variables. For portability, database management is the responsibility of the parent code. Input/output occurs via structured calling arguments. As much model information as possible (such as the lists of required inputs, as well as lists of precharacterized material data and special needs) is supplied by the model developer in an ASCII text file. Every MIG-compliant model also has three required subroutines to check data, to request extra field variables, and to perform model physics. To date, the MIG scheme has proven flexible in beta installations of a simple yield model, plus a more complicated viscodamage yield model, three electromechanical models, and a complicated anisotropic microcrack constitutive model. The MIG yield model has been successfully installed using identical subroutines in three vectorized parent codes and one parallel C++ code, all predicting comparable results. By maintaining one model for many codes, MIG facilitates code-to-code comparisons and reduces duplication of effort, thereby reducing the cost of installing and sharing models in diverse new codes.

More Details

Molecular dynamics of gases and vapors in nanoporous solids. Final LDRD project report

Pohl, Phillip I.

This report provides a study of gases in microporous solids using molecular modeling. The theory of gas transport in porous materials as well as the molecular modeling literature is briefly reviewed. Work complete is described and analyzed with retard to the prevailing theory. The work covers two simple subjects, construction of porous solid models and diffusion of He, H{sub 2}, Ar and CH{sub 4} down a pressure gradient across the material models as in typical membrane permeation experiments. The broader objective is to enhance our capability to efficiently and accurately develop, produce and apply microporous materials.

More Details

Crystalline silicotitanates--new ion exchanger for selective removal of cesium and strontium from radwastes

Klavetter, E.A.

A new class of inorganic ion exchange material called crystalline silicotitanates (CST) has been developed for radioactive waste treatment in a collaborative effort between Sandia National Laboratories and Texas A&M University. The Sandia National Laboratories Laboratory Directed Research and Development program provided the initial funding for this effort and this report summarizes the rapid progress that was achieved. A wide range of compositions were synthesized, evaluated for cesium (Cs) removal efficiency, and a composition called TAM-5 was developed that exhibits high selectivity and affinity for Cs and strontium (Sr). Tests show it can remove parts per million concentrations of Cs{sup +} from highly alkaline, high-sodium, simulated radioactive waste solutions modeled after those at Hanford, Oak Ridge, and Savannah River. In experiments with solutions that simulate highly alkaline Hanford defense wastes, the crystalline silicotitanates exhibit distribution coefficients for Cs{sup +} of greater than 2,000 ml/g, and distribution coefficients greater than 10,000 ml/g for solutions adjusted to a pH between 1 and 10. In addition, the CSTs were found to exhibit distribution coefficients for Sr{sup +} greater than 100,000 ml/g and for plutonium of 2,000 ml/g from simulated Hanford waste. The CST crystal structure was determined and positions of individual atoms identified using x-ray and neutron diffraction. The structural information has permitted identification of the ion exchange sites and provided insights into the strong effect of pH on Cs ion exchange. Information on the synthesis, composition, and structure of CST is considered proprietary and is not discussed in this report.

More Details

Considerations in modeling groundwater inflow to underground respositories

Christian-Frear, T.

Groundwater in and around underground radioactive waste repositories has several potential effects on repository performance. Repository excavation produces conditions where the repository is underpressured relative to the surrounding host rock, resulting in groundwater inflow to the repository. The presence of groundwater has been shown to enhance gas generation from emplaced waste forms, which expedites repository pressurization. Repository pressurization results in an increased driving force for dissolved radionuclide movement away from the repository. Repository excavation also produces a zone surrounding the repository having disturbed hydrologic and geochemical properties. Within the disturbed rock zone (DRZ), intrinsic permeability and porosity change over time due to the formation of microfractures and grain boundary dilation. Additionally, elastic and inelastic changes in pore volume may cause variation in the near-field fluid pressure and fluid saturation distributions that influence groundwater flow toward the repository excavation. Increased permeability, decreased pore-fluid pressure, and partially saturated conditions in the DRZ contribute to enhancing potential release pathways away from the repository. It is important for a repository performance assessment to consider chemical processes, hydrologic processes, as well as the complex coupling between these processes.

More Details

The use of combustible metals in explosive incendiary devices

Fischer, S.H.

We have investigated tailoring damage effects of explosive devices by addition of unconventional materials, specifically combustible metals. Initial small-scale as well as full-scale testing has been performed. The explosives functioned to disperse and ignite these materials. Incendiary, enhanced-blast, and fragment-damage effect have been identified. These types of effects can be used to extend the damage done to hardened facilities. In other cases it is desirable to disable the target with minimal collateral damage. Use of unconventional materials allows the capability to tailor the damage and effects of explosive devices for these and other applications. Current work includes testing of an incendiary warhead for a penetrator.

More Details

Safety assessment of high consequence robotics system

Robinson, David G.

This paper outlines the use of a failure modes and effects analysis for the safety assessment of a robotic system being developed at Sandia National Laboratories. The robotic system, the weigh and leak check system, is to replace a manual process for weight and leakage of nuclear materials at the DOE Pantex facility. Failure modes and effects analyses were completed for the robotics process to ensure that safety goals for the systems have been met. Due to the flexible nature of the robot configuration, traditional failure modes and effects analysis (FMEA) were not applicable. In addition, the primary focus of safety assessments of robotics systems has been the protection of personnel in the immediate area. In this application, the safety analysis must account for the sensitivities of the payload as well as traditional issues. A unique variation on the classical FMEA was developed that permits an organized and quite effective tool to be used to assure that safety was adequately considered during the development of the robotic system. The fundamental aspects of the approach are outlined in the paper.

More Details

Physical protection design and analysis training for the former Soviet Union

Soo Hoo, Mark S.

Since 1978, Sandia National Laboratories has provided training courses in the systematic design of Physical Protection Systems (PPS). One such course, the International Training Course (TC) on the Physical Protection of Nuclear Facilities and Materials, is sponsored by the Department of Energy`s International Safeguards Division , the International Atomic Energy Agency, and the Department of State. Since 1978, twelve 3- and 4-week classes have been conducted by Sandia for these sponsors. One- and two-week adaptations of this course have been developed for other customers, and, since 1994, nine of these abbreviated courses have been presented in the Russian language to participants from the Former Soviet Union (SU). These courses have been performed in support of the Department of Energy`s program on Material Protection, Control and Accounting (MPC&A) for the Russian Federation and the Newly Independent States. MPC&A physical protection training assumes participants have more narrowly defined backgrounds. In using affective approaches, the overall goal of training in the context of the MPC&A Program is to develop modern and effective, indigenous capabilities for physical protection system design and analysis within the SU. This paper contrasts the cognitive and affective approaches to training and indicates why different approaches are required for the ITC and the MPC&A Programs.

More Details

Numerical modeling of vertical cavity semiconductor lasers

Chow, Weng W.

A vertical cavity surface emitting laser (VCSEL) is a diode laser whose optical cavity is formed by growing or depositing DBR mirror stacks that sandwich an active gain region. The resulting short cavity supports lasing into a single longitudinal mode normal to the wafer, making these devices ideal for a multitude of applications, ranging from high-speed communication to high-power sources (from 2D arrays). This report describes the development of a numerical VCSEL model, whose goal is to both further their understanding of these complex devices and provide a tool for accurate design and data analysis.

More Details

Laboratory investigation of constitutive property up-scaling in volcanic tuffs

Tidwell, Vincent C.

One of the critical issues facing the Yucca Mountain site characterization and performance assessment programs is the manner in which property up-scaling is addressed. Property up-scaling becomes an issue whenever heterogeneous media properties are measured at one scale but applied at another. A research program has been established to challenge current understanding of property up-scaling with the aim of developing and testing improved models that describe up-scaling behavior in a quantitative manner. Up-scaling of constitutive rock properties is investigated through physical experimentation involving the collection of suites of gas-permeability data measured over a range of discrete scales. To date, up-scaling studies have been performed on a series of tuff and sandstone (used as experimental controls) blocks. Samples include a welded, anisotropic tuff (Tiva Canyon Member of the Paintbrush Tuff, upper cliff microstratigraphic unit), and a moderately welded tuff (Tiva Canyon Member of the Paintbrush Tuff, Caprock microstratigraphic unit). A massive fluvial sandstone (Berea Sandstone) was also investigated as a means of evaluating the experimental program and to provide a point of comparison for the tuff data. Because unsaturated flow is of prime interest to the Yucca Mountain Program, scoping studies aimed at investigating the up-scaling of hydraulic properties under various saturated conditions were performed to compliment these studies of intrinsic permeability. These studies focused on matrix sorptivity, a constitutive property quantifying the capillarity of a porous medium. 113 refs.

More Details

Characterization and fluid flow simulation of naturally fractured Frontier sandstone, Green River Basin, Wyoming

Lorenz, John C.

Significant gas reserves are present in low-permeability sandstones of the Frontier Formation in the greater Green River Basin, Wyoming. Successful exploitation of these reservoirs requires an understanding of the characteristics and fluid-flow response of the regional natural fracture system that controls reservoir productivity. Fracture characteristics were obtained from outcrop studies of Frontier sandstones at locations in the basin. The fracture data were combined with matrix permeability data to compute an anisotropic horizontal permeability tensor (magnitude and direction) corresponding to an equivalent reservoir system in the subsurface using a computational model developed by Oda (1985). This analysis shows that the maximum and minimum horizontal permeability and flow capacity are controlled by fracture intensity and decrease with increasing bed thickness. However, storage capacity is controlled by matrix porosity and increases linearly with increasing bed thickness. The relationship between bed thickness and the calculated fluid-flow properties was used in a reservoir simulation study of vertical, hydraulically-fractured and horizontal wells and horizontal wells of different lengths in analogous naturally fractured gas reservoirs. The simulation results show that flow capacity dominates early time production, while storage capacity dominates pressure support over time for vertical wells. For horizontal wells drilled perpendicular to the maximum permeability direction a high target production rate can be maintained over a longer time and have higher cumulative production than vertical wells. Longer horizontal wells are required for the same cumulative production with decreasing bed thickness.

More Details

Environmental measurement-while-drilling-gamma ray spectrometer (EMWD-GRS) system technology demonstration plan for use at the Savannah River Site F-Area Retention Basin

Williams, Cecelia V.

The Environmental Measurement-While-Drilling-Gamma Ray Spectrometer (EMWD-GRS) system represents an innovative blend of new and existing technology that provides the capability of producing real-time environmental and drillbit data during drilling operations. This demonstration plan presents information on the EMWD-GRS technology, demonstration design, Cs-137 contamination at the Savannah River Site F-Area Retention Basin, responsibilities of demonstration participants, and the policies and procedures for the demonstration to be conducted at the Savannah River Site F-Area Retention Basin. The EMWD-GRS technology demonstration will consist of continuously monitoring for gamma-radiation contamination while drilling two horizontal boreholes below the backfilled retention basin. These boreholes will pass near previously sampled vertical borehole locations where concentrations of contaminant levels are known. Contaminant levels continuously recorded by the EMWD-GRS system during drilling will be compared to contaminant levels previously determined through quantitative laboratory analysis of soil samples.

More Details

Technology integration project: Environmental Restoration Technologies Department Sandia National Laboratories

Williams, Cecelia V.

Sandia National Laboratories Environmental Restoration Technologies Department is developing environmental restoration technologies through funding form the US Department of Energy`s (DOE`s) Office of Science and Technology. Initially, this technology development has been through the Mixed Waste Landfill Integrated Demonstration (MWLID). It is currently being developed through the Contaminant Plume containment and Remediation Focus Area, the Landfill Stabilization Focus Area, and the Characterization, Monitoring, and Sensor Cross-Cutting Program. This Technology Integration Project (TIP) was responsible for transferring MWLID-developed technologies for routine use by environmental restoration groups throughout the DOE complex and commercializing these technologies to the private sector. The MWLID`s technology transfer/commercialization successes were achieved by involving private industry in development, demonstration, and technology transfer/commercialization activities; gathering and disseminating information about MWLID activities and technologies; and promoting stakeholder and regulatory involvement. From FY91 through FY95, 30 Technical Task Plans (TTPs) were funded. From these TTPs, the MWLID can claim 15 technology transfer/commercialization successes. Another seven technology transfer/commercialization successes are expected. With the changeover to the focus areas, the TIP continued the technology transfer/commercialization efforts begun under the MWLID.

More Details

A generalized fitting technique for the LIFE2 fatigue analysis code

Sutherland, Herbert J.

The analysis of component fatigue lifetime for a wind energy conversion system (WECS) requires that the component load spectrum be formulated in terms of stress cycles. Typically, these stress cycles are obtained from time series data using a cycle identification scheme. As discussed by many authors, the matrix or matrices of cycle counts that describe the stresses on a turbine are constructed from relatively short, representative samples of time series data. The ability to correctly represent the long-term behavior of the distribution of stress cycles from these representative samples is critical to the analysis of service lifetimes. Several techniques are currently used to convert representative samples to the lifetime cyclic loads on the turbine. There has been recently developed a set of fitting algorithms that is particularly useful for matching the body of the distribution of fatigue stress cycles on a turbine component. Fitting techniques are now incorporated into the LIFE2 fatigue/fracture analysis code for wind turbines. In this paper, the authors provide an overview of the fitting algorithms and describe the pre- and post-count algorithms developed to permit their use in the LIFE2 code. Typical case studies are used to illustrate the use of the technique.

More Details

Scaling of material properties for Yucca Mountain: literature review and numerical experiments on saturated hydraulic conductivity

Mckenna, Sean A.

A review of pertinent literature reveals techniques which may be practical for upscaling saturated hydraulic conductivity at Yucca Mountain: geometric mean, spatial averaging, inverse numerical modeling, renormalization, and a perturbation technique. Isotropic realizations of log hydraulic conductivity exhibiting various spatial correlation lengths are scaled from the point values to five discrete scales through these techniques. For the variances in log{sub 10} saturated hydraulic conductivity examined here, geometric mean, numerical inverse and renormalization adequately reproduce point scale fluxes across the modeled domains. Fastest particle velocities and dispersion measured on the point scale are not reproduced by the upscaled fields. Additional numerical experiments examine the utility of power law averaging on a geostatistical realization of a cross-section similar to the cross-sections that will be used in the 1995 groundwater travel time calculations. A literature review on scaling techniques for thermal and mechanical properties is included. 153 refs., 29 figs., 6 tabs.

More Details

Coherent change detection and interferometric ISAR measurements in the folded compact range

Sorensen, Kurt W.

A folded compact range configuration has been developed ant the Sandia National Laboratories` compact range antenna and radar-cross- section measurement facility as a means of performing indoor, environmentally-controlled, far-field simulations of synthetic aperture radar (SAR) measurements of distributed target samples (i.e. gravel, sand, etc.). The folded compact range configuration has previously been used to perform coherent-change-detection (CCD) measurements, which allow disturbances to distributed targets on the order of fractions of a wavelength to be detected. This report describes follow-on CCD measurements of other distributed target samples, and also investigates the sensitivity of the CCD measurement process to changes in the relative spatial location of the SAR sensor between observations of the target. Additionally, this report describes the theoretical and practical aspects of performing interferometric inverse-synthetic-aperture-radar (IFISAR) measurements in the folded compact range environment. IFISAR measurements provide resolution of the relative heights of targets with accuracies on the order of a wavelength. Several examples are given of digital height maps that have been generated from measurements performed at the folded compact range facility.

More Details

Process uniformity for plasma etchback and desmear in printed wiring board manufacturing

Ward, P.P.

In the manufacture of printed wiring boards (PWB), plasma etchback and desmear processes facilitate the making of good mechanical and electrical bonds of copper inner layers to copper plating. Without sufficient plasma treatment, internal layer copper features receive inadequate polymer removal which results in circuit discontinuity during the plating process. Additionally, the plasma serves to roughen the polymer wall of drilled holes which improves copper adhesion. To ensure proper plasma treatment, careful adherence to strict production guidelines is essential. These guidelines include attention to several critical criteria in placement, pretreatment and treatment of the PWBs during the plasma process; process verification via post plasma testing; and careful process monitoring throughout. In this brief, some guidelines for process monitoring and control will be discussed. A description of a new plasma monitor utilizing optical emission spectroscopy (OES), developed cooperatively between Sandia National Laboratories, National Consortium for Manufacturing Sciences (NCMS) and Texas Instruments Inc., will be discussed along with possible benefits derived from in situ monitoring of plasma systems.

More Details

SPHINX experimenters information package

Zarick, Thomas A.

This information package was prepared for both new and experienced users of the SPHINX (Short Pulse High Intensity Nanosecond X-radiator) flash X-Ray facility. It was compiled to help facilitate experiment design and preparation for both the experimenter(s) and the SPHINX operational staff. The major areas covered include: Recording Systems Capabilities,Recording System Cable Plant, Physical Dimensions of SPHINX and the SPHINX Test cell, SPHINX Operating Parameters and Modes, Dose Rate Map, Experiment Safety Approval Form, and a Feedback Questionnaire. This package will be updated as the SPHINX facilities and capabilities are enhanced.

More Details

The probability of containment failure by direct containment heating in Zion

Nuclear Engineering and Design

Pilch, M.M.; Yan, H.; Theofanous, T.G.

This paper is the first step in the resolution of the direct containment heating (DCH) issue for the Zion nuclear power plant using the risk oriented accident analysis methodology (ROAAM). This paper includes the definition of a probabilistic framework that decomposes the DCH problem into three probability density functions that reflect the most uncertain initial conditions (UO2 mass, zirconium oxidation fraction, and steel mass). Uncertainties in the initial conditions are significant, but our quantification approach is based on establishing reasonable bounds that are not unnecessarily conservative. To this end, we also make use of the ROAAM ideas of enveloping scenarios and 'splintering'. Two causal relations (CRs) are used in this framework: CR1 is a model that calculates the peak pressure in the containment as a function of the initial conditions, and CR2 is a model that returns the frequency of containment failure as a function of pressure within the containment. Uncertainty in CR1 is accounted for by the use of two independently developed phenomenological models, the convection-limited containment heating model and the two-cell equilibrium model, and by probabilistically distributing the key parameter in both, which is the ratio of the melt entrainment time to the system blowdown time constant. The two phenomenological models have been compared with an extensive database including recent integral simulations at two different physical scales (1:10-scale in the Surtsey facility at Sandia National Laboratories and 1:40-scale in the COREXIT facility at Argonne National Laboratory). The loads predicted by these models were significantly lower than those from previous parametric calculations. The containment load distributions do not intersect the containment strength (fragility) curve in any significant way, resulting in containment failure probabilities less than 10-3 for all scenarios considered. Sensitivity analyses did not show any areas of large sensitivity. The feasibility of extrapolating containment loads distributions to most other pressurized water reactors is explored.

More Details

Selective dehydrogenation over hydrous titanium oxide-supported catalytsts

Sault, Allen G.

The use of hydrous titanium oxide (HTO) ion-exchange materials as supports for iron and chromium based dehydrogenation catalysts is compared to current commercial catalyst systems in order to determine the potential of HTO technology for impacting this important chemical processing area. The best Fe/HTO catalysts synthesized to date achieve ethylbenzene conversions to styrene approaching those of commercial catalysts, even though the Fe/HTO catalysts contain no promoters while the commercial catalysts contain several different promoters, including K, Cr, and Ce. Addition of promoters to Fe/HTO catalyst is expected to result in further conversion improvements such that the activity of the commercial catalysts may be equaled or exceeded. Fe/HTO and Cr/HTO catalysts achieve only modest conversions of isobutane to isobutene that are far below available commercial catalysts. With the Cr/HTO catalysts, however, activity normalized to Cr loading far exceeds that of the commercial catalyst. Since optimum Cr loading conditions have not yet been identified, there is ample room for increases in both Cr loading and catalyst activity. Even if Cr/HTO and Fe/HTO catalysts do not ultimately exceed the performance obtained with commercial catalysts, the ability to cast HTO materials in the form of thin films may present important advantages for catalytic membrane reactor systems. These potential advantages are discussed and evaluated.

More Details

PNC/DOE Remote Monitoring Project at Japan`s Joyo Facility

Ross, Michael P.

The Power Reactor and Nuclear Fuel Development Corporation (PNC) of Japan and the US Department of Energy (DOE) are cooperating on the development of a remote monitoring system for nuclear nonproliferation efforts. This cooperation is part of a broader safeguards agreement between PNC and DOE. A remote monitoring system is being installed in a spent fuel storage area at PNC`s experimental reactor facility Joyo in Oarai. The system has been designed by Sandia National Laboratories (SNL) and is closely related to those used in other SNL remote monitoring projects. The Joyo project will particularly study the unique aspects of remote monitoring in contribution to nuclear nonproliferation. The project will also test and evaluate the fundamental design and implementation of the remote monitoring system in its application to regional and international safeguards efficiency. This paper will present a short history of the cooperation, the details of the monitoring system and a general schedule of activities.

More Details

Tuning a double quantum well Fermi surface with in-plane magnetic fields

Surface Science

Simmons, Jerry A.

A double quantum well (QW) subject to in-plane magnetic fields B∥ has the dispersion curves of its two QWs shifted in k-space. When the QWs are strongly coupled, an anticrossing and partial energy gap occur, yielding a tunable multi-component Fermi surface. We report measurements of the resultant features in the conductance, the capacitive density of states and giant deviations in the cyclotron effective masses.

More Details
Results 96351–96375 of 100,993
Results 96351–96375 of 100,993
Top