Publications

Abstract not provided.

Abstract not provided.

Inductive electromagnetic launchers, or coilguns, use discrete solenoidal coils to accelerate a coaxial conductive armature. To date, Sandia has been using an internally developed code, SLINGSHOT, as a point-mass lumped circuit element simulation tool for modeling coilgun behavior for design and verification purposes. This code has shortcomings in terms of accurately modeling gun performance under stressful electromagnetic propulsion environments. To correct for these limitations, it was decided to attempt to closely couple two Sandia simulation codes, Xyce and ALEGRA, to develop a more rigorous simulation capability for demanding launch applications. This report summarizes the modifications made to each respective code and the path forward to completing interfacing between them.

The Arquin Corporation has developed a new method of constructing CMU (concrete masonry unit) walls. This new method uses polymer spacers connected to steel wires that serve as reinforcing as well as means of accurately placing the spacers so that the concrete block can be dry stacked. The hollows of the concrete block used in constructing the wall are then filled with grout. As part of a New Mexico Small Business Assistance Program (NMSBAP), Sandia National Laboratories conducted a series of tests that statically loaded wall segments to compare the Arquin method to a more traditional method of constructing CMU walls. A total of 12 tests were conducted, three with the Arquin method using a W5 reinforcing wire, three with the traditional method of construction using a number 3 rebar as reinforcing, three with the Arquin method using a W2 reinforcing wire, and three with the traditional construction method but without rebar. The results of the tests showed that the walls constructed with the Arquin method and with a W5 reinforcing wire withstood more load than any of the other three types of walls that were tested.

Abstract not provided.

Abstract not provided.

This report summarizes the existing statistical engines in VTK/Titan and presents the parallel versions thereof which have already been implemented. The ease of use of these parallel engines is illustrated by the means of C++ code snippets. Furthermore, this report justifies the design of these engines with parallel scalability in mind; then, this theoretical property is verified with test runs that demonstrate optimal parallel speed-up with up to 200 processors.

We develop a scheme for providing strong cryptographic authentication on a stream of messages which consumes very little bandwidth (as little as one bit per message) and is robust in the presence of dropped messages. Such a scheme should be useful for extremely low-power, low-bandwidth wireless sensor networks and "smart dust" applications. The tradeoffs among security, memory, bandwidth, and tolerance for missing messages give rise to several new optimization problems. We report on experimental results and derive bounds on the performance of the scheme. © 2008 Springer-Verlag Berlin Heidelberg.

Higher performance is the main driver in the integrated circuit (IC) market, but along with added function comes the cost of increased input/output connections and larger die sizes. Space saving approaches aimed at solving these challenges includes two technologies; 3D stacking (3D-ICs) and flip chip assemblies. Emerging ICs require sub-micron scale interconnects which include vias for 3D-ICs and bump bonds for flip chips. Photolithographic techniques are commonly used to prepare templates followed by metal vapor deposition to create flip chip bump bonds. Both the lithography step and the metal properties required for bump bonding contribute to limiting this approach to a minimum bump size of ∼10 μm. Here, we present a wet chemistry approach to fabricating uniform bump bonds of tunable size and height down to the nanoscale. Nanosphere lithography (NSL), a "soft" lithographic technique, is used to create a bump bond template or mask for nanoscale bumps. Electrochemical deposition is also used through photoresist templates to create uniform bump bonds across large area wafers or dies. This template approach affords bumps with tunable diameters from 100s of nanometers to microns (allowing for tunable interconnect pitch and via diameters) while the use of constant current electoplating gives uniform bump height over large areas (>1 cm2).

A recently established mathematical equivalence-between weakly perturbed Huygens fronts (e.g., flames in weak turbulence or geometrical-optics wave fronts in slightly nonuniform media) and the inviscid limit of white-noise-driven Burgers turbulence-motivates theoretical and numerical estimates of Burgers-turbulence properties for specific types of white-in-time forcing. Existing mathematical relations between Burgers turbulence and the statistical mechanics of directed polymers, allowing use of the replica method, are exploited to obtain systematic upper bounds on the Burgers energy density, corresponding to the ground-state binding energy of the directed polymer and the speedup of the Huygens front. The results are complementary to previous studies of both Burgers turbulence and directed polymers, which have focused on universal scaling properties instead of forcing-dependent parameters. The upper-bound formula can be heuristically understood in terms of renormalization of a different kind from that previously used in combustion models, and also shows that the burning velocity of an idealized turbulent flame does not diverge with increasing Reynolds number at fixed turbulence intensity, a conclusion that applies even to strong turbulence. Numerical simulations of the one-dimensional inviscid Burgers equation using a Lagrangian finite-element method confirm that the theoretical upper bounds are sharp within about 15% for various forcing spectra (corresponding to various two-dimensional random media). These computations provide a quantitative test of the replica method. The inferred nonuniversality (spectrum dependence) of the front speedup is of direct importance for combustion modeling. © 2008 The American Physical Society.

The relative stability of alkaline earth metals (M2+ = Mg 2+, Ca2+, Sr2+, and Ba2+) and their chloride complexes in aqueous solution is examined through molecular dynamics simulations using a flexible SPC water model with an internally consistent set of metal ion force field parameters. For each metal-chloride ion pair in aqueous solution, the free energy profile was calculated via potential of mean force simulations. The simulations provide detailed thermodynamic information regarding the relative stability of the different types of metal-chloride pairs. The free energy profiles indicate that the preference for contact ion pair formation increases with ionic radius and is closely related to the metal hydration free energies. The water residence times within the first hydration shells are in agreement with residence times reported in other computational studies. Calculated association constants suggest an increase in metal-chloride complexation with increasing cation radii that is inconsistent with experimentally observed trends. Possible explanations for this discrepancy are discussed. © 2008 American Chemical Society.

Abstract not provided.

Single-mode 75 μm × 37 μm rectangular waveguide components, including horn antennas, couplers, and bends, for operation at 3 THz have been designed and fabricated using thick gold micromachining. THz transmission through these waveguides has been quasi-optically measured at 2.92 THz. This technology offers the potential for realizing miniature integrated systems operating in the 3 THz frequency range. © 2008 IEEE.

In this paper, we discuss our work in the modeling and characterization of an acousdc-microfluidlc focusing device that uses standing bulk acoustic waves to focus particles under flow. Modeling was done using Comsol Multiphysics® (Comsol, Los Angeles, CA), a multiphysics FEM tool, and the performance of the device was assessed through coefficient of variance (CV) measurements using a confocal microscope. © 2008 IEEE.

Abstract not provided.

Abstract not provided.

Fiber-optic sensors for sensing electrical current are attractive due to their inherent immunity to electromagnetic interference. Several groups have shown the use of Faraday rotation in magneto-optical materials as a function of current-induced magnetic field. In this work, fiber-optic sensors based on different mechanisms such as magnetic-fielddependent polarization coherence and power scattering effects in magneto-optical materials are demonstrated. These novel sensor configurations can have advantages in that they exhibit power-independent or polarization-independent operation which can ultimately lead to fewer components and relaxed light source requirements compared to fiber-optic current sensor systems based on Faraday rotation.

We have developed a system to measure the directional thermal emission from a surface, and in turn, calculate its emissivity. This approach avoids inaccuracies sometimes encountered with the traditional method for calculating emissivity, which relies upon subtracting the measured total reflectivity and total transmissivity from unity. Typical total reflectivity measurements suffer from an inability to detect backscattered light, and may not be accurate for high angles of incidence. Our design allows us to vary the measurement angle (θ) from near-normal to ∼80°, and can accommodate samples as small as 7 mm on a side by controlling the sample interrogation area. The sample mount is open-backed to eliminate shine-through, can be heated up to 200°C, and is kept under vacuum to avoid oxidizing the sample. A cold shield reduces the background noise and stray signals reflected off the sample. We describe the strengths, weaknesses, trade-offs, and limitations of our system design, data analysis methods, the measurement process, and present the results of our validation of this Variable-Angle Directional Emissometer.

Rare-earth-doped fibers, such as Er3+- and Yb3+-doped aluminosilicates can be advantageous in space-based systems due to their stability, their high-bandwidth transmission properties and their lightweight, small-volume properties. In such environments the effect of ionizing-radiation on the optical transmission of these fibers is of paramount importance. For the present work, gamma-radiation experiments were conducted in which un-pumped Yb3+ and Er3+ doped sample fibers were irradiated with a Cobalt-60 source under different dose-rate and temperature conditions. In-situ spectral transmittance data over the near IR was monitored during the irradiations for total doses of up to tens of krad (Si). It was found that there was a dose-rate dependence in which higher rates resulted in more photodarkening. Higher temperatures were not found to significantly affect the rate of photodarkening at the dose rates used.

Fiber-optic sensors for sensing electrical current are attractive due to their inherent immunity to electromagnetic interference. Several groups have shown the use of Faraday rotation in magneto-optical materials as a function of current-induced magnetic field. In this work, fiber-optic sensors based on different mechanisms such as magnetic-fielddependent polarization coherence and power scattering effects in magneto-optical materials are demonstrated. These novel sensor configurations can have advantages in that they exhibit power-independent or polarization-independent operation which can ultimately lead to fewer components and relaxed light source requirements compared to fiber-optic current sensor systems based on Faraday rotation.

A gated spectrometer has been designed for real-time, pulsed infrared (IR) studies at the National Synchrotron Light Source at the Brookhaven National Laboratory. A pair of 90-degree, off-axis parabolic mirrors are used to relay the light from an entrance slit to an output IR recording camera. With an initial wavelength range of 1500-4500 nm required, gratings could not be used in the spectrometer because grating orders would overlap. A magnesium oxide prism, placed between these parabolic mirrors, serves as the dispersion element. The spectrometer is doubly telecentric. With proper choice of the air spacing between the prism and the second parabolic mirror, any spectral region of interest within the InSb camera array's sensitivity region can be recorded. The wavelengths leaving the second parabolic mirror are collimated, thereby relaxing the camera positioning tolerance. To set up the instrument, two different wavelength (visible) lasers are introduced at the entrance slit and made collinear with the optical axis via flip mirrors. After dispersion by the prism, these two laser beams are directed to tick marks located on the outside housing of the gated IR camera. This provides first-order wavelength calibration for the instrument. Light that is reflected off the front prism face is coupled into a high-speed detector to verify steady radiance during the gated spectral imaging. Alignment features include tick marks on the prism and parabolic mirrors. This instrument was designed to complement singlepoint pyrometry, which provides continuous time histories of a small collection of spots from shock-heated targets.

The performance of a series connected photovoltaic array is limited by the photocell that is illuminated the least. This paper quantifies the effects of single-mode and multi-mode illumination and discusses the design parameters.

Understanding the corrosion of spent nuclear fuel (SNF) and the subsequent mobilization of released radionuclides, particularly under oxidizing conditions, is one of the key issues in evaluating the long-term performance of a nuclear waste repository. However, the large amounts of iron in the metal waste package may create locally reducing conditions that would lower corrosion rates for the SNF, as well as reduce the solubility of some key radionuclides, e.g., Tc and Np. In order to investigate the interactions among SNF-waste package-fluids, four smallscale (∼1:40 by length) waste package mockups were constructed using metals similar to those proposed for use in waste packages at the proposed repository at Yucca Mountain. Each mockup experiment differed with respect to water input, exposure to the atmosphere, and temperature. Simulated Yucca Mountain process water (YMPW) was injected into three of the mockups at a rate of 200 μL per day for five days a week using a calibrated needle syringe. The YMPW was prepared by equilibrating 50 mg/L silica as sodium metasilicate with air, and adding enough HC1 to lower the pH to 7.6 in contact with an excess of powdered calcite. X-ray powder diffraction and scanning electron microscopy confirm that, where corrosion occurred, the dominant corrosion product in all cases was magnetite. In the high temperature (60°C) experiment, hematite and a fibrous, Fe-O-Cl phase were also identified. The Fe(II)/Fe(III) ratios measured in the corrosion products using a wet chemistry technique indicate extremely low oxygen fugacities (10-36 bar). Experiments are in progress in which 0.1g powdered UO2 was included in the mock-up in order to investigate the relative kinetics of Fe and U oxidation and to identify the U corrosion products formed under these conditions. © 2008 Materials Research Society.

Tracer aluminum alloyed wires (Al5056) are used to provide additional information for x-ray diagnostics of implosions of Cu planar wire arrays (PWAs). Specifically, the analysis of combined PWA experiments using the extensive set of x-ray diagnostics is presented. In these experiments, which were conducted at the 1MA pulsed power generator at University of Nevada, Reno, the Z-pinch load consisted of several (eight) Cu alloyed (main material) and one to two Al alloyed (tracer) wires mounted in a single plane row or double parallel plane rows, single planar wire array (SPWA) or double planar wire array (DPWA), respectively. The analysis of x-ray spatially resolved spectra from the main material indicates the increase in the electron temperature Te near the cathode. In general, the axial gradients in Te are more pronounced for SPWA than for DPWA due to the more "columnlike" plasma formation for SPWA compared to "hot-spot-like" plasma formation for DPWA. In addition, x-ray spectra from tracer wires are studied, and estimated plasma parameters are compared with those from the main material. It is observed that the x-ray K -shell Al spectra manifest more opacity features for the case of SPWA with about 18% of Al mass (to the total load mass) compared to the case of DPWA with about 11% of Al mass. The analysis of time-gated spectra shows that the relative intensity of the most intense K -shell Al line, small before the x-ray burst, increases with time and peaks close to the maximum of the sub-keV signal. © 2008 American Institute of Physics.

In the relatively new field of visual analytics there is a great need for automated approaches to both verify and discover the intentions and schemes of primary actors through time. Data mining and knowledge discovery play critical roles in facilitating the ability to extract meaningful information from large and complex textual-based (digital) collections. In this study, we develop a mathematical strategy based on nonnegative tensor factorization (NTF) to extract and sequence important activities and specific events from sources such as news articles. The ability to automatically reconstruct a plot or confirm involvement in a questionable activity is greatly facilitated by our approach. As a variant of the PARAFAC multidimensional data model, we apply our NTF algorithm to the terrorism-based scenarios of the VAST 2007 Contest data set to demonstrate how term-by-entity associations can be used for scenario/plot discovery and evaluation. © 2008 Springer-Verlag Berlin Heidelberg.