Publications

Sandia National Laboratories conducts the photovoltaic balance of systems (BOS) program, which is sponsored by the US Department of Energy`s Office of Energy Management. Under this program, SNL lets commercialization contracts and conducts a laboratory program designed to advance BOS technology, improve BOS component reliability, and reduce the BOS life-cycle-cost. This report details the testing of the first large US manufactured hybrid inverter and its associated maximum power tracker.

The overpressurization of a 1:6-scale reinforced concrete containment building demonstrated that liner tearing is a plausible failure mode in such structures under severe accident conditions. A combined experimental and analytical program was developed to determine the important parameters which affect liner tearing and to develop reasonably simple analytical methods for predicting when tearing will occur. Three sets of test specimens were designed to allow individual control over and investigation of the mechanisms believed to be important in causing failure of the liner plate. The series of tests investigated the effect on liner tearing produced by the anchorage system, the loading conditions, and the transition in thickness from the liner to the insert plate. Before testing, the specimens were analyzed using two- and three-dimensional finite element models. Based on the analysis, the failure mode and corresponding load conditions were predicted for each specimen. Test data and post-test examination of test specimens show mixed agreement with the analytical predictions with regard to failure mode and specimen response for most tests. Many similarities were also observed between the response of the liner in the 1:6-scale reinforced concrete containment model and the response of the test specimens. This work illustrates the fact that the failure mechanism of a reinforced concrete containment building can be greatly influenced by details of liner and anchorage system design. Further, it significantly increases the understanding of containment building response under severe conditions.

As part of an Environmentally Conscious Manufacturing (ECM) Program, a study was conducted at Sandia National Laboratories to identify an alternative cleaning process that would effectively replace trichloroethylene (TCE) for cleaning mechanical piece parts of Switch Tube assemblies. Eight aqueous alkaline cleaners, as well as an isopropyl alcohol and isopropyl alcohol/Cyclohexane cleaning process, were studied as potential replacements. Cleaning efficacy, materials compatibility, etch rate and corrosion studies were conducted and used to screen potential candidates. Cleaning efficacy was determined using visual examination, goniometer/contact angle measurements, Auger electron spectroscopy, X-ray Photoelectron spectroscopy and an evaporative rate analysis technique known as MESERAN Surface Analysis. Several cleaners were identified as potential replacements for TCE based solely on the cleaning efficacy results. Some of the cleaners, however, left undesirable residues studies were completed, Brulin 815GD (an aqueous alkaline cleaner) was selected as the replacement for TCE.

This paper describes the planning of evaluation for one large-scale national energy program with-scale, national energy program with international reporting requirements, US. Climate Change Action Plant. Referred to as Energy Partnerships for a Strong Economy, this program includes 19 DOE Office of Energy Efficiency and Renewable Energy (EE) initiatives and three other DOE projects. The evaluation strategy is to have a six year effort with ongoing performance measurement, market studies and process evaluations when deviations from targeted outcomes occur, and a final evaluation report that combines these results with other impact evaluations deemed necessary. The evaluation planning and implementation will use a collaborative approach involving program managers and stakeholders, including program partners and customers, to ensure that evaluation results are useful and utilized. Performance mapping will be used to describe the programs to be evaluated and determine data collection needs and key evaluation questions. The evaluation plan uses multiple evaluation methods, including model and engineering estimates, self-reporting by partners, case studies, surveys, and modified peer/expert review in order to accommodate the scope and diversity of programs and the need to measure progress as well as impact.

The part-load behavior of a typical 30-MWe SEGS (solar electric generating systems) plant was studied using a detailed thermodynamic model. As part of this analysis, a new solar field model was derived, based on measurement results of an LS-2 Collector and accounting for various conditions of receiver tubes, lost mirrors and measured reflectivity. A comparison was made of the model results to real plant conditions for a winter and summer day in order to test the accuracy of the model. The effects of bare tubes, different wind speeds, mirror reflectivity and other factors were studied showing, e.g., that heat losses due to wind are predicted to be very low. The comparison also shows that the model still lacks the capability to fully account for actual solar field conditions. The model was also compared to the SOLERGY model, showing differences between the assumptions used in both models. Finally different operating conditions of the plant were studied for a summer, fall, and winter day to provide a better understanding of how changing solar field outlet temperatures affect gross and net output of the plant. This clearly indicates that the lowest possible superheating temperature maximizes the gross electric output. On a net basis this conclusion is modified due to the high parasitics of the HTF (heat transfer fluid) pumps. It was found that the optimum operating strategy depends on the insolation conditions, e.g., different superheating temperatures should be chosen in summer, fall and winter. If the pressure drop in the solar field is reduced due to replacement of flex hoses with ball joints, increasing the HTF flow is more reasonable, so that at low isolation conditions the lowest possible superheating temperature also leads to the maximum net output.

The Energy Policy Act of 1992 required the DOE to develop recommendations and implement government programs to assist the domestic uranium industry in increasing export opportunities. In 1993, as part of that effort, the Office of Nuclear Energy identified several key factors that could (or have) significantly impact(ed) export opportunities for domestic uranium. This report addresses one of these factors: regulatory and policy impediments to the flow of uranium products between the US and other countries. It speaks primarily to the uranium market for civil nuclear power. Changes in the world political and economic order have changed US national security requirements, and the US uranium industry has found itself without the protected market it once enjoyed. An unlevel playing field for US uranium producers has resulted from a combination of geology, history, and a general US political philosophy of nonintervention that precludes the type of industrial policy practiced in other uranium-exporting countries. The US has also been hampered in its efforts to support the domestic uranium-producing industry by its own commitment to free and open global markets and by international agreements such as GATT and NAFTA. Several US policies, including the imposition of NRC fees and licensing costs and Harbor Maintenance fees, directly harm the competitiveness of the domestic uranium industry. Finally, requirements under US law, such as those in the 1979 Nuclear Nonproliferation Act, place very strict limits on the use of US-origin uranium, limitations not imposed by other uranium-producing countries. Export promotion and coordination are two areas in which the US can help the domestic uranium industry without violating existing trade agreements or other legal or policy constraints.

The fabrication of a prosthetic socket for a below-the-knee amputee requires knowledge of the underlying bone structure in order to provide pressure relief for sensitive areas and support for load bearing areas. The goal is to enable the residual limb to bear pressure with greater ease and utility. Conventional methods of prosthesis fabrication are based on limited knowledge about the patient`s underlying bone structure. A 3D ultrasound imaging system was developed at Sandia National Laboratories. The imaging system provides information about the location of the bones in the residual limb along with the shape of the skin surface. Computer assisted design (CAD) software can use this data to design prosthetic sockets for amputees. Ultrasound was selected as the imaging modality. A computer model was developed to analyze the effect of the various scanning parameters and to assist in the design of the overall system. The 3D ultrasound imaging system combines off-the-shelf technology for image capturing, custom hardware, and control and image processing software to generate two types of image data -- volumetric and planar. Both volumetric and planar images reveal definition of skin and bone geometry with planar images providing details on muscle fascial planes, muscle/fat interfaces, and blood vessel definition. The 3D ultrasound imaging system was tested on 9 unilateral below-the- knee amputees. Image data was acquired from both the sound limb and the residual limb. The imaging system was operated in both volumetric and planar formats. An x-ray CT (Computed Tomography) scan was performed on each amputee for comparison. Results of the test indicate beneficial use of ultrasound to generate databases for fabrication of prostheses at a lower cost and with better initial fit as compared to manually fabricated prostheses.

Combination glass electrodes were tested for determining H{sup +} concentrations in concentrated pure and mixed NaCl and Na{sub 2}SO{sub 4} solutions, as well as natural brine systems. NaCl, Na{sub 2}SO{sub 4}, and mixtures of NaCl and Na{sub 2}SO{sub 4} solutions were analyzed. Correction factors for estimating pC{sub H}{sup +} (negative logarithm of H{sup +} concentration) were determined from measured/observed pH values. Required Gran-type titrations were done with HCl and/or NaOH. The titration method is described and a step-by-step procedure provided; it has been used previously for determining pC{sub H}{sup +} values of synthetic chloride-dominated brines. Precautions are required to determine correction factors for electrolytes that react with H{sup +} or OH{sup {minus}} [sulfate brines for titration with acid; magnesium brines for titration with base because of precipitation of Mg(OH)2]. Correction factors A (pC{sub H}{sup +} = pH{sub ob} + A) from HCl titrations were similar to those from NaOH titrations where the concentration of free H{sup +} was calculated using a thermodynamic model. These values should be applicable to solns with a very large range in measured pH values (2 to 12). Because a large number of solns were titrated with HCl and the A values are similar for HCl and NaOH titrations, the A values for NaCl and Na2SO4 solns were fit as a function of molality to allow extrapolation. For NaCl solns 0 to 6.0 M, A can be obtained by multiplying the molality by 0.159. For Na2SO4 solns 0 to 2.0 M, the values of A can be obtained from (0.221 {minus} 0.549X + 0.201X{sup 2}), where X is the molality of Na{sub 2}SO{sub 4}. Orion-Ross electrode evaluations indicated that the A values did not differ significantly for different electrodes. Results suggest that the data in this report can be used to estimate A values for different NaCl and Na{sub 2}SO{sub 4} solns even for noncalibrated electrodes.

Asynchronous Transfer Mode (ATM) technology is currently receiving extensive attention in the computer networking arena. Many experts predict that ATM will be the future networking technology for both the Local Area Network (LAN) and the Wide Area Network (WAN). This paper presents the results of a collaboration between Sandia National Laboratories` Advanced Networking Department and Engineering Sciences Center to study the implementation of ATM in one of Sandia`s most heavily loaded production networks. The network consists of over 120 Sun Sparc 10s and 20s, two SparcCenter 2000s, a 12 node parallel IBM SP-2, and several other miscellaneous high-end workstations. The existing network was first characterized through extensive traffic measurements to better understand the capabilities and limitations of the existing network technologies and to provide a baseline for comparison to an ATM network. This characterization was used to select a subset of the network elements which would benefit most from conversion to the ATM technology. This subset was then converted to equipment based on the latest ATM standards. With direct OC-3c (155 Mbps) host connections for the workstations and the file and compute servers, we demonstrated as much as 122 Mbps throughput (memory-to-memory TCP/IP transfers) between endpoints. Flow control in the classical many-to-one client server environment was also investigated. Throughout all of our tests, the interaction of the user applications with the network technologies was documented and possible improvements were tested. The performance and reliability of the ATM network was compared to the original network to determine the benefits and liabilities of the ATM technology.

No abstract available.

Models for direct containment heating (DCH) in the CONTAIN code for severe accident analysis have been reviewed and a standard input prescription for their use has been defined. The code has been exercised against a large subset of the available DCH data base. Generally good agreement with the experimental results for containment pressurization ({Delta}P) and hydrogen generation has been obtained. Extensive sensitivity studies have been performed which permit assessment of many of the strengths and weaknesses of specific model features. These include models for debris transport and trapping, DCH heat transfer and chemistry, atmosphere-structure heat transfer, interactions between nonairborne debris and blowdown steam, potential effects of debris-water interactions, and hydrogen combustion under DCH conditions. Containment compartmentalization is an important DCH mitigator in the calculations, in agreement with experimental results. The CONTAIN model includes partially parametric treatments for some processes that are not well understood. The importance of the associated uncertainties depends upon the details of the DCH scenario being analyzed. Recommended sensitivity studies are summarized that allow the user to obtain a reasonable estimate of the uncertainties in the calculated results.

In this paper we study the question: How useful is randomization in speeding up Exclusive Write PRAM computations? Our results give further evidence that randomization is of limited use in these types of computations. First we examine a compaction problem on both the CREW and EREW PRAM models, and we present randomized lower bounds which match the best deterministic lower bounds known. (For the CREW PRAM model, the lower bound is asymptotically optimal.) These are the first non-trivial randomized lower bounds known for the compaction problem on these models. We show that our lower bounds also apply to the problem of approximate compaction. Next we examine the problem of computing boolean functions on the CREW PRAM model, and we present a randomized lower bound, which improves on the previous best randomized lower bound for many boolean functions, including the OR function. (The previous lower bounds for these functions were asymptotically optimal, but we improve the constant multiplicative factor.) We also give an alternate proof for the randomized lower bound on PARITY, which was already optimal to within a constant additive factor. Lastly, we give a randomized lower bound for integer merging on an EREW PRAM which matches the best deterministic lower bound known. In all our proofs, we use the Random Adversary method, which has previously only been used for proving lower bounds on models with Concurrent Write capabilities. Thus this paper also serves to illustrate the power and generality of this method for proving parallel randomized lower bounds.

The queue-read, queue-write (QRQW) parallel random access machine (PRAM) model is a shared memory model which allows concurrent reading and writing with a time cost proportional to the contention. This is designed to model currently available parallel machines more accurately than either the CRCW PRAM or EREW PRAM models. Many algorithmic results have been developed for the QRQW PRAM. However, the only lower bound results have been fairly simple reductions from lower bounds for other models, such as the EREW PRAM or the ``few-write`` CREW PRAM. Here we present a lower bound specific to the QRQW PRAM. This lower bound is on the problem of Linear Approximate Compaction (LAC), whose input consists of at most m marked items in an array of size n, and whose output consists of the rn marked items in an array of size 0(m). There is an O({radical}log n), expected time randomized algorithm for LAC on the QRQW PRAM. We prove a lower bound of {Omega}(log log log n) expected time for any randomized algorithm for LAC. This bound applies regardless of the number of processors and memory cells of the QRQW PRAM. The previous best lower bound was {Omega}(log* n) time, taken from the known lower bound for LAC on the CRCW PRAM.

SPH (Smoothed Particle Hydrodynamics) is a gridless Lagrangian technique which is appealing as a possible alternative to numerical techniques currently used to analyze high deformation impulsive loading events. In the present study, the SPH algorithm has been subjected to detailed testing and analysis to determine the feasibility of using PRONTO/SPH for the analysis of various types of underwater explosion problems involving fluid-structure and shock-structure interactions. Of particular interest are effects of bubble formation and collapse and the permanent deformation of thin walled structures due to these loadings. These are exceptionally difficult problems to model. Past attempts with various types of codes have not been satisfactory. Coupling SPH into the finite element code PRONTO represents a new approach to the problem. Results show that the method is well-suited for transmission of loads from underwater explosions to nearby structures, but the calculation of late time effects due to acceleration of gravity and bubble buoyancy will require additional development, and possibly coupling with implicit or incompressible methods. © 1995 Springer-Verlag.

The authors have characterized the pyrochlore-to-perovskite crystallization process in solution-derived Pb(Zr{sub 0.20}Ti{sub 0.80})O{sub 3} thin films on (100) MgO single crystal substrates. It has been determined that the perovskite phase nucleated preferentially at the film/MgO interface out of a nanocrystalline ({approx}100{angstrom} grains) pyrochlore matrix. During the early stages of the pyrochlore-to-perovskite conversion process, perovskite growth proceeded nearly isotropically from the substrate to form hemispherically shaped grains. Deviations from isotropic growth were shown to result from a growth dependence based on the crystallographic orientation of a growing perovskite grain relative to the orientations of pyrochlore grains being transformed. The volume change that occurs during the pyrochlore-to-perovskite transformation along with two-dimensional grain growth has been used to develop a mechanism for formation of porosity that commonly is concentrated in grain boundary regions.

Sandia National Laboratories has established a Cooperative Research and Development Agreement with consortium members of the National Center for Manufacturing Sciences (NCMS) to develop fundamental generic technology in the area of printed wiring board materials and surface finishes. Improved solderability of copper substrates is an important component of the Sandia-NCMS program. The authors are investigating the effects of surface roughness on the wettability and solderability behavior of several different types of copper board finishes. In this paper, the authors present roughness and solderability characterizations for a variety of chemically-etched copper substrates. Initial testing on six chemical etches demonstrate that surface roughness can be greatly enhanced through chemical etching. Noticeable improvements in solder wettability were observed to accompany increases in roughness. A number of different algorithms and measures of roughness were used to gain insight into surface morphologies that lead to improved solderability.

This report describes the results of experiments performed to determine the viability of titanium dioxide photocatalysis towards the treatment of water contaminated with different metal-EDTA complexes. Both the PB-EDTA and Ni-EDTA complexes were chosen for study, as they represent respectively metals that are and are not capable of photodeposition onto the TiO{sub 2} catalyst during the photoreaction. Batch reactions were carried out in a jacketed glass pot reactor using 300 ml of 50m g/l metal chelated with an equimolar amount of EDTA and 0.1wt% of TiO{sub 2} in the solution. The UV source used was a 100 W low-pressure Hg spot lamp. The two systems were studied using Degussa P-25 titanium dioxide, and Aldrich titanium dioxide loaded with Pt and Au. Around 80% removal of the Ni-EDTA complex was attained after 120 min using both catalysts with no photodeposition of Ni onto the catalyst. However, pH precipitation treatment of the reacted solutions indicated that the Ni was still complexed, probably to complexing agents that were EDTA oxidation products. Apparent zero-order kinetics was observed in the P-25 catalyst reaction, whereas apparent first-order kinetics was observed in the metal-loaded TiO{sub 2} catalyst. In contrast the Pb-EDTA complex was completely removed in 10 min using both catalysts. Also, complete Pb deposition onto the catalyst was attained in 30 min for both catalysts. The Pb deposition seemed to first require the degradation of the complex. Total organic carbon was reduced in the Ni-EDTA system 15--21% using both catalysts, and about 33% in the Pb-EDTA system using both catalysts. No reduction of either metal or metal complex was observed when no catalyst was present and the other conditions held constant.

Borehole-to-surface electromagnetic (EM) methods are an attractive alternative to Surface-based EM methods for a variety of environmental and engineering applications. They have improved sensitivity to the subsurface resistivity distribution because of the closer proximity to the area of interest offered by the borehole for the source or the receiver. For the borehole-to-surface measurements the source is in the borehole and the receivers are on the surface. On the other hand, for the surface-to-borehole methods, the source is on the surface and the receiver is in a borehole. The surface-to-borehole method has an added advantage since measurements are often more accurate due to the lower noise environment for the receiver. For these methods, the source can be a grounded electric dipole or a vertical magnetic dipole source. An added benefit of these techniques is field measurements are made using a variety of arrays where the system is tailored to the application and where one can take advantage of some new imaging methods. In this short paper the authors describe the application of the borehole-to-surface method, discuss benefits and shortcomings, and give two field examples where they have been used for underground imaging. The examples were the monitoring of a salt water flooding of an oil well and the characterization of a fuel oil spill.

The authors performed an X-ray diffraction study of tetrahedral-coordinated-amorphous carbon (a-tC) films prepared by pulsed laser deposition (PLD). Samples properties were analyzed as a function of laser energy and thickness. For all thicknesses and laser energies, films were made up of clusters with a basic unit size of 7 - 11 nm. Thicker films, as well as films prepared at higher laser densities exhibit larger clusters, in the tens of nanometers. The clusters are not readily observable by AFM, which may indicate the presence of a flat (graphitized) top film surface.

The structural evaluation test unit is roughly equivalent to a 1/3 scale model of a high level waste rail cask. The test unit was designed to just meet the requirements of NRC Regulatory Guide 7.6 when subjected to a 9 m (30 ft) free drop resulting in an impact velocity of 13.4 m/s (30 mph) onto an unyielding target in the end-on orientation. The test unit was then subjected to impacts with higher velocities to determine the amount of built-in conservatism in this design approach. Test impacts of 13.4, 20.1 and 26.8 m/s (30, 45, and 60 mph) were performed. This paper will describe the design, testing, and comparison of measured strains and deformations to the equivalent analytical predictions.

A Discrete element computer program named DMC (Distinct Motion Code) has been developed for modeling rock blasting. This program employs explicit time integration and uses spherical or cylindrical elements which are represented as circles in 2-D. DMC calculations have been compared with measurements on bench blasts in the field with relatively good comparison. Structural rock mass characteristics have a significant impact on any blast and DMC has not, until now, included these effects. This paper discusses a recently added DMC capability for treating joints and bedding planes in bench blast simulations. Material strength is treated in DMC by creating links between spheres to hold them together. The links can be broken based on any criterion; simple tension, compression and shear are currently employed. Joint sets are treated in DMC by defining the dip of each set toward or away from the bench face along with the joint spacing. Strength links that cross joint planes can have their strength properties modified or they can be deleted. Modification of the link patterns based on joint sets creates distinct blocks of spheres outlined by the intersecting joints. These blocks of spheres move together as a solid unit unless stress and strain conditions within the block indicate that links should be broken. Simulations using this capability show some blocks remaining intact throughout the blast and some being partially or completely broken. When this occurs, the joint pattern is shown to influence the characteristics of the blast. Upon completion of this capability both rock breakage and motion will be modeled during the same simulation. Much work remains to be done on this concept making this paper a progress report on the development of this new capability.

Hydrogen is found to readily diffuse into InGaN, InAlN and InGaAlN epitaxial layers during plasma exposures at 170-250{degree}C for 40 sec-30 min. The diffusivity of hydrogen is > 10{sup -11} cm{sup 2} {center_dot} s{sup -1} at 170{degree}C, and the native donor species are passivated by association with the hydrogen. Reactivation of these species occurs at 450-500{degree}C, but the hydrogen remains in the material until {ge} 800{degree}C.

Pb(Zr,Ti)O{sub 3} (PZT) thin films are being developed for use in optical and electronic memory devices. To study ferroelectric switching behavior, the authors have produced relatively untextured PZT thin films on Si substrates. They have developed a method for using X-ray diffraction to observe domain switching in situ. This study involved the use of a micro-diffractometer to monitor the switching behavior in relatively small (0.7 mm diameter) electroded areas. Diffraction analyses were done while DC voltages were applied and removed, representing several places in the hysteresis loop. In particular, the authors were looking for relative intensity changes in the [h00],[00l] diffraction peaks as a function of position in the hysteresis loop. This study indicates that the 90{degrees} domain switching exhibited by bulk ferroelectrics, is very limited in films on Si when grain sizes are less than about 1{mu}m.

Increasingly constrained budgets in the defense community, both DoD and DOE, have created a need to emphasize affordability in the development of future weapons systems and components. Increased use of commercially compatible components will play an important role, but there will always remain a need for specialized production, especially at the system level. We will present on-going work at Sandia National Laboratories (referred to from here as Sandia) aimed at insuring the affordability of low-volume, defence-specific systems.

The 6.4 MeV p({sup l5}N,{alpha}{gamma}){sup 12}C resonant nuclear reaction has been used to investigate the role of hydrogen as a contributing factor in the formation of stress-induced voids in very large scale integrated circuit metallizations. Hydrogen profiles were measured from a series of layered structures consisting of aluminum-copper alloy metallizations deposited on borophosphosilicate glass and capped with a variety of commercial passivation materials in order to examine differences in the concentrations and depth distributions of hydrogen within the layered structures.

Accident source terms, source term probabilities, consequences, and risks are developed for ship collisions that might occur in US ports during the shipment of spent fuel from foreign research reactors to the United States.

Increasing computational speed has led to the development and use of sophisticated numerical methods in radioactive material (RAM) transportation container design. The design of a RAM container often involves a complex coupling of structural, thermal, and radioactive shielding analyses. Sandia National Laboratories has integrated automatic mesh generation, explicit structural finite element analysis, transient thermal finite element analysis, and numerical optimization techniques into a unified RAM container design tool to increase the efficiency of both the design process and the resultant design through coupled analyses. Although development of this technique has progressed significantly, inaccurate numerical gradients due to design space nonsmoothness and excessive computational time have hampered successful implementation of numerical optimization as a ``black box`` design tool. This paper presents the details of analysis tool integration, simplified model development, constraint boundary nonsmoothness difficulties, and numerical optimization results for a lightweight composite-overpack Type B RAM package subject to dynamic crush and fuel fire accident condition constraints.

The possibility of a collision with the earth and need for detection of asteroids and comets is briefly discussed.

An historical look at software systems reveals a progression of thinking about protection and risk management. In this paper, three generations are defined. For each, we examine the prevalent views of risk, risk assessment, and risk mitigation. We also examine prevalent strategies for assurance. Many gaps exist in current knowledge of how to manage and assess risks in software systems. This paper presents a new perspective which enables comprehensive risk-based design and evaluation of systems, spanning a range of surety concerns (including correctness and safety, in addition to traditional security concerns), and addressing multiple system aspects. We believe this to be a new and unique multidisciplinary approach which transcends both traditional security approaches and traditional risk analysis methods. It facilitates a risk analysis completely tailored to the system at hand, instantiating its threats, its barriers, and its needs for risk reduction.

Etch rates for binary nitrides in ECR Cl{sub 2}/CH{sub 4}/H{sub 2}/Ar are reported as a function of temperature, rf-bias, microwave power, pressure and relative gas proportions. GaN etch rates remain relatively constant from 30 to 125{degrees}C and then increase to a maximum of 2340 {angstrom}-min{sup {minus}1} at 170{degrees}C. The AlN etch rate decreases throughout the temperature range studied with a maximum of 960 {angstrom}-min{sup {minus}1} at 30{degrees}C. When CH{sub 4} is removed from the plasma chemistry, the GaN and InN etch rates are slightly lower, with less dramatic changes with temperature. The surface composition of the III-V nitrides remains unchanged over the temperatures studied. The GaN and InN rates increase significantly with rf power, and the fastest rates for all three binaries are obtained at 2 mTorr. Surface morphology is smooth for GaN over a wide range of conditions, whereas InN surfaces are more sensitive to plasma parameters.

In a light-water reactor core melt accident, if the reactor pressure vessel (RPV) fails while the reactor coolant system (RCS) at high pressure, the expulsion of molten core debris may pressurize the reactor containment building (RCB) beyond its failure pressure. A failure in the bottom head of the RPV, followed by melt expulsion and blowdown of the RCS, will entrain molten core debris in the high-velocity steam blowdown gas. This chain of events is called a high-pressure melt ejection (HPME). Four mechanisms may cause a rapid increase in pressure and temperature in the reactor containment: (1) blowdown of the RCS, (2) efficient debris-to-gas heat transfer, (3) exothermic metal-steam and metal-oxygen reactions, and (4) hydrogen combustion. These processes, which lead to increased loads on the containment building, are collectively referred to as direct containment heating (DCH). It is necessary to understand factors that enhance or mitigate DCH because the pressure load imposed on the RCB may lead to early failure of the containment.

In this paper, a massively parallel implementation of the boundary element method to study particle transport in Stokes flow is discussed. The numerical algorithm couples the quasistatic Stokes equations for the fluid with kinematic and equilibrium equations for the particles. The formation and assembly of the discretized boundary element equations is based on the torus-wrap mapping as opposed to the more traditional row- or column-wrap mappings. The equation set is solved using a block Jacobi iteration method. Results are shown for an example application problem, which requires solving a dense system of 6240 equations more than 1200 times.

Poly (1, 4 bis(triethoxysilyl)benzene) (PTESB), a representative of a new type of organic-inorganic hybrid polysilsesquioxane material, was characterized by fluorescence spectroscopy for both microenvironmental polarity and solvent accessibility. A dansyl fluorescent molecule was incorporated into the bulk as well as onto the surface of both PTESB and silica materials. Information about the microenvironment polarity and accessibility of PTESB to various organic solvents was determined and compared to that of silica gel. This study found that both the bulk and surface of PTESB are less polar than that of the silica material. The silica material is accessible to polar solvents and water, while YMB is accessible to polar solvents but not to water. The hydrophobicity of PTESB differentiates these new materials from silica gel.

By developing an approximation to the first integral of the Poisson equation, one can obtain solutions for the voltage-current characteristics of a radio-frequency (rf) plasma sheath that are valid over the whole range of inertial response of the ions to an imposed rf voltage or current-specified conditions. The theory adequately reproduces the time-dependent voltage-current characteristics of the two extreme cases corresponding to the Lieberman rf sheath theory and the Metze-Ernie-Oskam theory. Contained within the approximation is a time constant which controls the amount of ion response to the rf electric field. A prescription is given for determining this ion relaxation time constant, which also determines the time-dependent ion impact energy on the electrode surface.

Organometallic and hydride compounds are widely used as precursors for the epitaxial growth of GaAs and other compound semiconductors. These precursors are most commonly used to perform organometallic vapor phase epitaxy (OMVPE) and also in related deposition techniques such as atomic layer epitaxy (ALE) and metalorganic molecular beam epitaxy (MOMBE). We have investigated the surface chemical properties of these precursors on GaAs(100) using a variety of surface science diagnostics. Results have shed light on the mechanisms of precursor decomposition which lead to film growth and carbon doping. For instance, kinetics of trimethylgallium (TMGa) decomposition on the Ga-rich and As-rich surfaces, measured by TPD, are in semiquantitative agreement with ALE results; indicating that the dominant growth mechanism during ALE is heterogeneous. Furthermore, there is no compelling evidence for the production of methane (CH{sub 4}) on the GaAs surface when TMGa and arsine (AsH{sub 3}) are coadsorbed.

This paper describes a new optical interconnect architecture and the integrated optoelectronic circuit technology for implementing a parallel, reconfigurable, multiprocessor network. The technology consists of monolithic array`s of optoelectronic switches that integrate vertical-cavity surface-emitting lasers with three-terminal heterojunction phototransistors, which effectively combined the functions of an optical transceiver and an optical spatial routing switch. These switches have demonstrated optical switching at 200 Mb/s, and electrical-to-optical data conversion at > 500 Mb/s, with a small-signal electrical-to-optical modulation bandwidth of {approximately} 4 GHz.

Bimodal space reactor systems provide both thermal propulsion for the spacecraft orbital transfer and electrical power to the spacecraft bus once it is on station. These systems have the potential to increase both the available payload in high energy orbits and the available power to that payload. These increased mass and power capabilities can be used to either reduce mission cost by permitting the use of smaller launch vehicles or to provide increased mission performance from the current launch vehicle. A major barrier to the deployment of these bimodal systems has been the cost associated with their development. This paper describes a bimodal reactor system with performance potential to permit more than 70% of the instrumented payload of the Titan IV/Centaur to be launched from the Atlas IIAS. The development cost is minimized by basing the design on existing component technologies.

Sandia Laboratories has developed a thin film diamond substrate technology to meet the requirements for high power and high density circuits. Processes were developed to metallize, photopattern, laser process, and, package diamond thin film networks which were later assembled into high power multichip modules (MCMS) to test for effectiveness at removing heat. Diamond clearly demonstrated improvement in heat transfer during 20 Watt, strip heating experiments with junction-to-ambient temperature increases of less than 24 C compared to 126 C and 265 C for the aluminum nitride and ceramic versions, respectively.

Accurate finite-element simulation of 3-D nonlinear heat transfer in complex systems may require meshes composed of tens of thousands of finite elements and hours of CPU time on today`s fastest computers. To treat applications in which thousands of calculations may be necessary such as for risk assessment or design of high-temperature manufacturing processes, methods are needed which can solve these problems far more efficiently and maintain an acceptably high degree of accuracy. For this purpose, we developed the Thermal Evaluation and Matching Program for Risk Applications (TEMPRA). The primary differentiator between TEMPRA and comparable codes is its numerical formulation, which is designed to be unconditionally stable even with very large time steps, to afford good accuracy even with relatively coarse meshing, and to facilitate benchmarking/calibration through the use of adjustable parameters. Analysis for a sample problem shows that TEMPRA can obtain temperature response solutions with errors of less than 10% using approximately 1/1000 of the computer time required by a typical finite element code.

Prosperity Games are an outgrowth and adaptation of move/countermove and seminar War Games. Prosperity Games are simulations that explore complex issues in a variety of areas including economics, politics, sociology, environment, education and research. These issues can be examined from a variety of perspectives ranging from a global, macroeconomic and geopolitical viewpoint down to the details of customer/supplier/market interactions in specific industries. All Prosperity Games are unique in that both the game format and the player contributions vary from game to game. This report documents the Prosperity Game conducted under the sponsorship of the Electronics Subcommittee of the Civilian Industrial Technology Committee (under the National Science and Technology Council), and the Electronics Partnership Project. Players were drawn from the electronics industry, from government, national laboratories, and universities, and from Japan and Austria. The primary objectives of this game were: To connect the technical and non-technical (i.e., policy) issues that were developed in the roadmap-making endeavor of the National Electronics Manufacturing Initiative (NENI);to provide energy, enthusiasm and people to help the roadmap succeed; and to provide insight into high-leverage public and private investments. The deliberations and recommendations of these teams provide valuable insights as to the views of this diverse group of decision makers concerning policy changes, foreign competition, the robustness of strategic thinking and planning, and the development, delivery and commercialization of new technologies.

The transmission of mechanical power is often accomplished through the use of gearing. The recently developed surface micromachined microengine provides us with an actuator which is suitable for driving surface micromachined geared systems. In this paper we will present aspects of the microengine as they relate to the driving of geared mechanisms, issues relating to the design of micro gear mechanisms, and details of a design of a microengine-driven geared shutter mechanism.

Goal of the Smart Gun Technology project is to eliminate the capability of an unauthorized user from firing a law enforcement officer`s firearm by implementing user-recognizing-and-authorizing surety technologies. This project is funded by the National Institute of Justice. This document reports the projects first objective: to find and document the requirements for a user-recognizing-and-authorizing firearm technology that law enforcement officers will value. This report details the problem of firearm takeaways in law enforcement, the methodology used to develop the law enforcement officers` requirements, and the requirements themselves.

Two test bed concentrators (TBCs) were designed to provide high-performance test beds for advanced solar receivers and converters. However, the second-surface silvered-glass mirror facets on the TBCs, which were originally manufactured by the Jet Propulsion Laboratory, have experienced severe silver corrosion. To restore reflectance, TBC-2 was refurbished with a lustering technique developed at Sandia National Laboratories. In the lustering technique, second-surface silvered thin-glass mirrors were applied over the corroded facets, thereby increasing the dish reflectivity and raising the available power of TBC-2 from approximately 70 to 78 kW{sub t}. Degradation of the original optical accuracy of the TBC facets was determined to be minimal. Lustering was chosen over facet replacement because of the lower cost, the anticipated improvement in corrosion resistance, and the shorter project duration. This report includes background information, details of the lustering process, and test results from TBC-2 characterization, both before and after lustering.

Nanometer size silicon nitride particles are synthesized using a pulsed radio frequency plasma technique. The plasma is modulated with a square-wave on/off cycle of varying period to control size and morphology and to deduce the growth kinetics. In situ laser light scattering and ex situ particle analysis are used to study the nucleation and growth. For SiH{sub 4}/Ar plasmas which nucleate silicon particles, an initial extremely rapid growth phase is followed by a slower growth rate, approaching the rate of thin film deposition on adjacent flat surfaces. In SiH{sub 4}/NH{sub 3} plasmas, silicon nitride particle size can be tightly controlled by adjusting the plasma-on time. The size dispersion of the particles is large and is consistent with a process of continual nucleation during the plasma-on period. The observed polydispersity differs dramatically from that reported from other laboratories.

A non-contact capacitive sensing system has been developed for guiding automated welding equipment along typical v-groove geometries. The Multi-Axis Seam Tracking (MAST) sensor has been designed to produce four electric fields for locating and measuring the v-groove geometry. In this system, the MAST sensor is coupled with a set of signal conditioning electronics making it possible to output four varying voltages proportional to the electric field perturbations. This output is used for motion control purposes by the automated welding platform to guide the weld torch directly over the center of the v-groove. This report discusses the development of this capacitive sensing system. A functional description of the system and MAST sensor response characteristics for typical weld v-groove geometries are provided. The effects of the harsh thermal and electrical noise environments of plasma arc welding on sensor performance are discussed. A comparison of MAST sensor fabrication from glass-epoxy and thick-film ceramic substrates is provided. Finally, results of v-groove tracking experiments on a robotic welding platform are described.

Since resonant sensors have a temperature sensitivity which is often greater than their sensitivity to the phenomena they are being used to detect, it is imperative to include either temperature control or temperature compensation in any resonant sensor system. The authors have developed a temperature-compensation scheme for resonant sensors which is amenable to integration into a resonator-driver integrated circuit. An integrated circuit incorporating this scheme has been designed, built, and tested.

Continuing trends in device fabrication towards smaller feature sizes, lower thermal budgets and advanced device structures put greater emphasis on controlling the surface structure and reactivity during processing. Since the evolution of the semiconductor surface during processing is determined by the interaction of multiple surface processes, understanding how to control and modify these processes on the atomic level would enable us to exert greater control over the resulting morphology and composition. Low energy ions represent one method for bringing controlled amounts of energy to the surface to modify surface structure and kinetics. The kinetic energy deposited by the ions can break bonds and displace atoms, creating defect populations significantly in excess of the equilibrium concentration. Consequences of these non-equilibrium conditions include the enhancement of surface kinetic processes, increased surface reactivity and formation of metastable structures and compositions. These effects can be beneficial (ion enhanced mass transport can lead to surface smoothing) or they can be detrimental (residual defects can degrade electrical properties or lead to amorphization). The net results depend on a complex balance that depends on many parameters including ion mass, energy, flux and temperature. In the following section, we review progress both in our fundamental understanding of the production of low-energy ion-induced defects and in the use of low energy ions to enhance surface morphology, stimulate low temperature growth and obtain non-equilibrium structures and compositions.

The Department of Energy Order 55003A requires facility-specific hazards assessment be prepared, maintained, and used for emergency planning purposes. This hazards assessment document describes the chemical and radiological hazards associated with the Kauai Test Facility, Barking Sands, Kauai, Hawaii. The Kauai Test Facility`s chemical and radiological inventories were screened according to potential airborne impact to onsite and offsite individuals. The air dispersion model, ALOHA, estimated pollutant concentrations downwind from the source of a release, taking into consideration the toxicological and physical characteristics of the release site, the atmospheric conditions, and the circumstances of the release. The greatest distance to the Early Severe Health Effects threshold is 4.2 kilometers. The highest emergency classification is a General Emergency at the {open_quotes}Main Complex{close_quotes} and a Site Area Emergency at the Kokole Point Launch Site. The Emergency Planning Zone for the {open_quotes}Main Complex{close_quotes} is 5 kilometers. The Emergency Planning Zone for the Kokole Point Launch Site is the Pacific Missile Range Facility`s site boundary.

Uranium contamination of groundwaters and surface waters near abandoned mill tailings piles is a serious concern in many areas of the western United States. Uranium usually exists in either the U(IV) or the U(VI) oxidation state. U(VI) is soluble in water and, as a result, is very mobile in the environment. U(IV), however, is generally insoluble in water and, therefore, is not subject to aqueous transport. In recent years, researchers have discovered that certain anaerobic microorganisms, such as the sulfate-reducing bacteria Desulfovibrio desulfuricans, can mediate the reduction of U(VI) to U(IV). Although the ability of this microorganism to reduce U(VI) has been studied in some detail by previous researchers, the kinetics of the reactions have not been characterized. The purpose of this research was to perform kinetic studies on Desulfovibrio desulficans bacteria during simultaneous reduction of sulfate and uranium and to determine the phase in which uranium exists after it has been reduced and precipitated from solution. The studies were conducted in a laboratory-scale chemostat under substrate-limited growth conditions with pyruvate as the substrate. Kinetic coefficients for substrate utilization and cell growth were calculated using the Monod equation. The maximum rate of substrate utilization (k) was determined to be 4.70 days{sup {minus}1} while the half-velocity constant (K{sub s}) was 140 mg/l COD. The yield coefficient (Y) was determined to be 0.17 mg cells/mg COD while the endogenous decay coefficient (k{sub d}) was calculated as 0.072 days{sup {minus}1}. After reduction, U(IV) Precipitated from solution in the uraninite (UO{sub 2}) phase. Uranium removal efficiency as high as 90% was achieved in the chemostat.

The packaging, designated the H1636A is a high-performing packageing for large payloads. The H1636A is 50 in. in diameter and 113 in. in length and weighs approximately 4600 lb when empty. The design objective was to meet 1996 proposed IAEA Type C criteria for air transport of large quantities of radioactive material (RAM). That is, the package should survive the standard Type B tests and more severe tests such as an impact onto an unyielding target at 280 ft/s and a one-hour jet fuel fire. The packaging consists of a large double-walled stainless steel outer drum filled with uniform density polyurethane foam. A stainless steel containment vessel (CV) with an inside diameter of 23 in. and a length of 78 in. carries the RAM. The CV has a nominal thickness of 0.375 in. and seals with two elastomeric 0-rings. The lid of the CV is joined to the body with a unique closure called a tape joint. The tape joint utilizes interlocking features preloaded with wedges and can withstand significant deformation.

Which current pulsed accelerator technology was developed during the late 60`s through the late 80`s to satisfy the needs of various military related applications such as effects simulators, particle beam devices, free electron lasers, and as drivers for Inertial Confinement Fusion devices. The emphasis in these devices is to achieve very high peak power levels, with pulse lengths on the order of a few 10`s of nanoseconds, peak currents of up to 10`s of MA, and accelerating potentials of up to 10`s of MV. New which average power systems, incorporating thermal management techniques, are enabling the potential use of high peak power technology in a number of diverse industrial application areas such as materials processing, food processing, stack gas cleanup, and the destruction of organic contaminants. These systems employ semiconductor and saturable magnetic switches to achieve short pulse durations that can then be added to efficiently give MV accelerating, potentials while delivering average power levels of a few 100`s of kilowatts to perhaps many megawatts. The Repetitive High Energy Puled Power project is developing short-pulse, high current accelerator technology capable of generating beams with kJ`s of energy per pulse delivered to areas of 1000 cm{sup 2} or more using ions, electrons, or x-rays. Modular technology is employed to meet the needs of a variety of applications requiring from 100`s of kV to MV`s and from 10`s to 100`s of kA. Modest repetition rates, up to a few 100`s of pulses per second (PPS), allow these machines to deliver average currents on the order of a few 100`s of mA. The design and operation of the second generation 300 kW RHEPP-II machine, now being brought on-line to operate at 2.5 MV, 25 kA, and 100 PPS will be described in detail as one example of the new high average power, high current pulsed accelerator technology.

Sandia National Laboratories (SNL) has traditionally used chlorinated and fluorinated organic solvents for general degreasing applications. Many of these solvents have been labeled by the Federal Government as ozone depleting chemicals and as toxic and/or suspected carcinogens. As a result, these solvents will no longer be recommended for use within the DOE weapons complex. There are three major classes of materials that are of concern for cleaning: organics, metals and ceramics. Each of these materials has its own special cleaning problems. Solvents that were used in the past, such as 1,1,1-trichloroethane (TCA) and trichloroethylene (TCE), were extremely efficient at removing everything from oils and greases to salts without leaving corrosive residues or permanently absorbing into the materials. These traditional degreasing solvents were essentially ``all-inone`` cleaners: quick, reliable, and easy to use. Unfortunately, a ``drop-in`` cleaner for such a wide variety of materials and contaminants will probably never be identified. So far, it has been difficult to identify environmentally conscious cleaners that clean as well as TCE and TCA. Most alternative cleaners require more volume to do the job, and also require longer exposure to get the job done. With these things in mind, we are hoping to identify and qualify new cleaners that will take care of general classes of materials.

At Sandia National Laboratories the Biomedical Engineering Program uses existing weapons-related technology in medical applications in order to reduce health care costs, improve diagnoses, and promote efficient health care delivery. This paper describes several projects which use Sandia technologies to solve biomedical problems. Specific technical capabilities that are important to this program include sensor data interpretation, robotics, lasers and optics, microelectronics, image processing and materials.

The increased demand for freight movements through international ports of entry and the signing of the North American Free Trade Agreement (NAFTA) have increased freight traffic at border ports of entry. The State-of-the-Art Port of Entry Workshop initiated a dialogue among technologists and stakeholders to explore the potential uses of technology at border crossings and to set development priorities. International ports of entry are both information and labor intensive, and there are many promising technologies that could be used to provide timely information and optimize inspection resources. Participants universally held that integration of technologies and operations is critical to improving port services. A series of Next Steps was developed to address stakeholder issues and national priorities, such as the National Transportation Policy and National Drug Policy. This report documents the views of the various stakeholders and technologists present at the workshop and outlines future directions of study.

A thermomechanical analysis of unidirectional continuous fiber metal matrix composites is presented. The analysis includes the effects of processing induced residual thermal stresses, interface cracking, and inelastic matrix behavior on damage evolution. Due to the complexity of the nonlinear effects, the analysis is performed computationally using the finite element method. The interface fracture is modeled by a nonlinear constitutive model. The problem formulation is summarized and results are presented for a four-ply unidirectional SCS-6/{beta}21S titanium composite under high temperature isothermal mechanical fatigue.

The chemistry and physical properties of fullerenes, the third, molecular allotrope of carbon, have been studied using both experimental and computational techniques. Early computational work investigated the stability of fullerene isomers and oxides, which was followed by extensive work on hydrogenated fullerenes. Our work led to the first synthesis of a polymer containing C{sub 60} and the synthesis of the simplest hydrocarbon derivatives of C{sub 60} and C{sub 70}. The excellent agreement between theory and experiment ({plus_minus} 0.1 kcal/mol in the relative stability of isomers) has provided insight into the chemical nature of fullerenes and has yielded a sound basis for prediction of the structure of derivatized fullerenes. Such derivatives are the key to the preparation of fullerene-based materials.

The TRC code, a mid-course tracking code for ballistic missiles, has previously been implemented on a 1024-processor MIMD (Multiple Instruction -- Multiple Data) massively parallel computer. Measures of Effectiveness (MOE) for this algorithm have been developed for this computing environment. The MOE code is run in parallel with the TRC code. Particularly useful MOEs include the number of missed objects (real objects for which the TRC algorithm did not construct a track); of ghost tracks (tracks not corresponding to a real object); of redundant tracks (multiple tracks corresponding to a single real object); and of unresolved objects (multiple objects corresponding to a single track). All of these are expressed as a function of time, and tend to maximize during the time in which real objects are spawned (multiple reentry vehicles per post-boost vehicle). As well, it is possible to measure the track-truth separation as a function of time. A set of calculations is presented illustrating these MOEs as a function of time for a case with 99 post-boost vehicles, each of which spawns 9 reentry vehicles.

Instrumentation which directly monitors the temperature of a coring bit used to retrieve core samples of high level nuclear waste stored in tanks at Hanford was developed at Sandia National Laboratories. Monitoring the temperature of the coring bit is desired to enhance the safety of the coring operations. A unique application of mature technologies was used to accomplish the measurement. This report documents the results of development testing performed at Sandia to assure the instrumentation will withstand the severe environments present in the waste tanks.

In extraterrestrial applications, satellite payloads have printed circuit modules that are housed in boxes or chassis. The box may be a one piece wall or a segmented wall. These two wall options are compared for function and cost.

The deformation characteristics of pellets of electrolyte-binder (EB) mixes based on MgO were measured under simulated, thermal-battery conditions. Measurements (using a statistically designed experimental strategy) were made as a function of applied pressure, temperature, and percentage of theoretical density for four molten-salt electrolytes at two levels of MgO. The EB mixes are used as separators in Li-alloy thermal batteries. The electrolytes included LiCl-KCI eutectic, LiCl-LiBr-KBr eutectic, LiBr-KBr-LiF eutectic, and a LiCl-LiBr-LiF electrolyte with a minimum-melting composition. The melting points ranged from 313 C to 436 C. The experimental data were used to develop statistical models that approximate the deformation behavior of pellets of the various EB mixes over the range of experimental conditions we examined. This report, discusses the importance of the deformation response surfaces to thermal-battery design.

Passive Soil Vapor Extraction was tested at the Chemical Waste Landfill (CWL) site at Sandia National Laboratories, New Mexico (SNLIW). Data collected included ambient pressures, differential pressures between soil gas and ambient air, gas flow rates into and out of the soil and concentrations of volatile organic compounds (VOCS) in vented soil gas. From the differential pressure and flow rate data, estimates of permeability were arrived at and compared with estimates from other studies. Flow, differential pressure, and ambient pressure data were collected for nearly 30 days. VOC data were collected for two six-hour periods during this time. Total VOC emissions were calculated and found to be under the limit set by the Resource Conservation and Recovery Act (RCRA). Although a complete process evaluation is not possible with the data gathered, some of the necessary information for designing a passive venting process was determined and the important parameters for designing the process were indicated. More study is required to evaluate long-term VOC removal using passive venting and to establish total remediation costs when passive venting is used as a polishing process following active soil vapor extraction.

A comprehensive environmental sample management program allocates much of its resources to collecting, managing, and manipulating information. A computerized system that collects information at the field sampling point, tracks the sample to analytical labs and loads electronic data deliverables from these labs, while maintaining chain of custody and data integrity, is efficient and cost effective for providing consistent and accurate, legally defensible sample data. In June 1993, a team was formed to gather Sample Management Office requirements and begin development of a sample tracking system. This paper is an overview of experiences encountered when Sandia transferred and implemented sample software from the Waste Area Group (WAG6) at ORNL.

The International Technology Exchange Program (ITEP) of the Department of Energy`s (DOE`s) Office of Environmental Management (EM) is responsible for promoting the import of innovative technologies to better address EM`s needs and the export of US services into foreign markets to enhance US competitiveness. Under this program, potentially innovative environmental restoration technologies, either commercially available or under development in the Netherlands and France, were identified, described, and evaluated. It was found that 12 innovative environmental restoration technologies, which are either commercially available or under development in the Netherlands and France, may have some benefit for the DOE EM program and should be considered for transfer to the United States.

The Vital Issues process (VIp) is a strategic planning tool initially developed by Sandia National Laboratories (SNL) for the Office of Foreign Intelligence (OFI)* of the US Department of Energy (DOE). It was further developed and refined through its application to a variety of strategic purposes for a range of public and semipublic organizations. The VIp provides a structured mechanism for assisting organizations in accomplishing specified objectives by identifying and prioritizing a portfolio of strategic issues, programmatic areas, or responses to a specified problem. It employs day-long panel meetings in a specified format to elicit a broad range of perspectives on a particular issue in a nonconfrontational manner and to facilitate the interaction and synthesis of diverse viewpoints on a specific topic. The VIp is unique in its incorporation of two primary approaches in each panel session: a qualitative or transactional segment, which entails the synthesis of the alternatives through negotiations or discussion, and a quantitative or net benefit maximization segment, an analytical approach, which involves prioritization of the alternatives using pairwise comparisons. This combination of facilitated group discussion and quantitative ranking provides input to strategic management decisions in the form of stakeholder-defined and -prioritized items as well as information on potential barriers to the implementation of policies and programs. This is the final volume in the series Identifying Vital Issues: New Intelligence Strategies for a New World, a three-volume set that gives an accounting of the VIp as implemented for OFI. This volume provides an in-depth description of the methodology used in the VIp.

The International Technology Program (IT?), formerly the international Technology Exchange Program (ITEP), of the Department of Energy`s (DOE`s) Office of Environmental Restoration and Waste Management (EM) is responsible for promoting: (1) the import of innovative technologies to better address EM`s needs; and (2) the export of US services into foreign markets to enhance US competitiveness. Under this program: (1) the environmental restoration market in Germany was evaluated, including the description of the general types of environmental problems, the environmental regulations, and specific selected contaminated sites; and (2) potentially innovative environmental restoration technologies, either commercially available or under development in Germany, were identified, described and evaluated. It was found that: (1) the environmental restoration market in Germany is very large, on the order of several billion US dollars per year, with a significant portion possibly available to US businesses; and (2) a large number (54) of innovative environmental restoration technologies, which are either commercially available or under development in Germany, may have some benefit to the DOE EM program and should be considered for transfer to the US.

This report describes the development and testing of a compact heat-pipe heat exchanger kW(e) designed to transfer thermal energy from hot combustion gases to the heater tubes of a 25-kW(e) Stirling engine. In this system, sodium evaporates from a surface that is heated by a stream of hot gases. The liquid metal then condenses on the heater tubes of a Stirling engine, where energy is transferred to the engine`s helium working fluid. Tests on a prototype unit illustrated that a compact (8 cm {times} 13 cm {times} 16 cm) sodium evaporator can routinely transfer 15 kW(t) of energy at an operating vapor temperature of 760 C. Four of these prototype units were eventually used to power a 25-kW(e) Stirling engine system. Design details and test results from the prototype unit are presented in this report.

This report describes the research accomplishments achieved under the LDRD Project ``Electron Phase Coherent Effects in Nanostructures and Coupled 2D Systems.`` The goal of this project was to discover and characterize novel quantum transport phenomena in small semiconductor structures at low temperatures. Included is a description of the purpose of the research, the various approaches used, and a detailed qualitative description of the numerous new results obtained. The first appendix gives a detailed listing of publications, presentations, patent applications, awards received, and various other measures of the LDRD project success. Subsequent appendices consist of reprinted versions of several specific,`` scientific journal publications resulting from this LDRD project.

An integral part of the licensing procedure for the potential nuclear waste repository at Yucca Mountain, Nevada, involves prediction of the in situ rheology for the design and construction of the facility and the emplacement of canisters containing radioactive waste. The data used to model the thermal and mechanical behavior of the repository and surrounding lithologies include dry and saturated bulk densities, average grain density, porosity, compressional and shear wave velocities, elastic moduli, and compressional and tensional fracture strengths. In this study, a suite of experiments was performed on cores recovered from the USW NRG-717A borehole drilled in support of the Exploratory Studies Facility (ESF) at Yucca Mountain. USW NRG-7/7A was drilled to a depth of 1,513.4 feet through five thermal/mechanical units of Paintbrush tuff and terminating in the tuffaceous beds of the Calico IEUS. The thermal/mechanical stratigraphy was defined by Orfiz et al. to group rock horizons of similar properties for the purpose of simplifying modeling efforts. The relationship between the geologic stratigraphy and the thermal/mechanical stratigraphy is presented. The tuff samples in this study have a wide range of welding characteristics, and a smaller range of mineralogy and petrology characteristics. Generally, the samples are silicic, ash-fall tuffs that exhibit large variability in their elastic and strength properties.

Relationships between countries generally exist somewhere in the grey area between war and peace. Crisis prevention activities are important in this area, and should have two goals: stabilizing tense situations that could push countries toward war, and supporting or reinforcing efforts to move countries toward peace. A Crisis Prevention Center (CPC) should facilitate efforts to achieve these goals. Its functions can be grouped into three broad, interrelated categories: establishing and facilitating communication among participating countries; supporting negotiations and consensus-building on regional security issues; and supporting implementation of agreed confidence and security building measures. Technology will play a critical role in a CPC. Technology is required for establishing communication systems to ensure the timely flow of information between countries and to provide the means for organizing and analyzing this information. Technically-based cooperative monitoring can provide an objective source of information on mutually agreed issues, thereby supporting the implementation of confidence building measures and treaties. Technology can be a neutral subject of interaction and collaboration between technical communities from different countries, thereby providing an important channel for improving relationships. Potential first steps for a CPC in the Middle Ease could include establishing communication channels and a dedicated communications center in each country, together with an agreement to use the system as a ``Hot Line` in bilateral and multilateral-lateral emergency situations. Bilateral cooperative monitoring centers could be established to assist with implementation of agreements. A centrally located CPC could serve as a regional communications hub, coordinating a number of functions aimed at stabilizing regional tensions and supporting confidence building activities. Specific recommendations for confidence building activities are discussed.

A novel multi-chip module (MCM) design and manufacturing methodology which utilizes active CMOS circuits in what is normally a passive substrate realizes the `smart substrate` for use in highly testable, high reliability MCMS. The active devices are used to test the bare substrate, diagnose assembly errors or integrated circuit (IC) failures that require rework, and improve the testability of the final MCM assembly. A static random access memory (SRAM) MCM has been designed and fabricated in Sandia Microelectronics Development Laboratory in order to demonstrate the technical feasibility of this concept and to examine design and manufacturing issues which will ultimately determine the economic viability of this approach. The smart substrate memory MCM represents a first in MCM packaging. At the time the first modules were fabricated, no other company or MCM vendor had incorporated active devices in the substrate to improve manufacturability and testability, and thereby improve MCM reliability and reduce cost.

Sandia National Laboratories and the Institute for Global Conflict and Cooperation hosted a workshop on the application of cooperative monitoring to the Middle East. The workshop, held in Albuquerque, New Mexico, from July 17 through 21, 1994, was sponsored by the US Department of Energy, the Arms Control and Disarmament Agency, and the US Department of State. The meeting, which focused on use of technical monitoring tools and sharing of collected information to facilitate regional agreements, included participants from five regional countries as well as from American universities, the US government, and US National Laboratories. Some attendees previously participated in meetings of the Arms Control and Regional Security working group of the Middle East Multilateral Peace Talks. The workshop combined presentations, demonstrations and hands-on experimentation with monitoring hardware and software. An exercise was conducted to evaluate and recommend cooperative monitoring options for a model agreement between two hypothetical countries. Historical precedents were reviewed and the role of environmental and natural resource conflicts explored. These activities were supplemented by roundtable discussions covering Middle East security issues, the relationship of ``national means`` to cooperative monitoring, and cooperative monitoring of ballistic missiles in the Middle East.

This report presents the results of an experimental study of the aerosol produced by the combustion of high-velocity molten-uranium droplets produced by the simultaneous heating and electromagnetic launch of uranium wires. These tests are intended to simulate the reduction of high-velocity fragments into aerosol in high-explosive detonations or reactor accidents involving nuclear materials. As reported earlier, the resulting aerosol consists mainly of web-like chain agglomerates. A condensation nucleus counter was used to investigate the decay of the total particle concentration due to coagulation and losses. Number size distributions based on mobility equivalent diameter obtained soon after launch with a Differential Mobility Particle Sizer showed lognormal distributions with an initial count median diameter (CMD) of 0.3 {mu}m and a geometric standard deviation, {sigma}{sub g} of about 2; the CMD was found to increase and {sigma}{sub g} decrease with time due to coagulation. Mass size distributions based on aerodynamic diameter were obtained for the first time with a Microorifice Uniform Deposit Impactor, which showed lognormal distributions with mass median aerodynamic diameters of about 0.5 {mu}m and an aerodynamic geometric standard deviation of about 2. Approximate methods for converting between number and mass distributions and between mobility and aerodynamic equivalent diameters are presented.

A natural and basic problem in scheduling theory is to provide good average quality of service to a stream of jobs that arrive over time. In this paper we consider the problem of scheduling n jobs that are released over time in order to minimize the average completion time of the set of jobs. In contrast to the problem of minimizing average completion time when all jobs are available at time 0, all the problems that we consider are NP-hard, and essentially nothing was known about constructing good approximations in polynomial time. We give the first constant-factor approximation algorithms for several variants of the single and parallel machine model. Many of the algorithms are based on interesting algorithmic and structural relationships between preemptive and nonpreemptive schedules and linear programming relaxations of both. Many of the algorithms generalize to the minimization of average weighted completion time as well.

The cryogenic thermometers used in superconducting accelerators must function in very adverse environments. Typical conditions are a temperature range of 1.5--300 K, high irradiation doses and magnetic fields which must be endured for the 20 to 50 year life of the accelerator. The authors determined the principal requirements for cryogenic thermometers in accelerator installations and for industrial applications. Some constructions of the thermometer mounting fixtures used in the ``Nuclotron`` (Dubna, Russia) and the SSCL (Dallas, USA) accelerator installations are described. The experimental results for long-term stability of the cryogenic thermometers applied are presented. The basic recommendations on the application technology of the cryogenic thermometers in large superconducting accelerator systems are given.

Numerous Federal facilities within the US involve multiple government agencies that face overlapping environmental concerns. This paper highlights the benefits of looking beyond the strict letter of environmental regulations that might affect a single tenant or environmental site to cooperative environmental efforts that focus on the entire facility, consistent with the missions of participating agencies. Using Kirtland Air Force Base (AFB) as a model, seven areas of Department of Defense (DoD) and Department of Energy (DOE) environmental cooperation are discussed that span technical, regulatory compliance, and administrative issues.

Detailed simulations have been performed for the TEVES (Thermal Enhanced Vapor Extraction System) Project using the TOUGH2 code considering air, water, and a single-component NAPL. A critical parameter varied in the simulations is the borehole vacuum which directly affects air flow through the system and indirectly influences soil temperatures and water and NAPL fluid masses. Contaminant migration from the heated zone into the unheated soil can occur if the borehole vacuum, or borehole flow rate, is not sufficient. Under these conditions, evaporation of liquids (water and NAPL) due to the heating can cause flow from the heated zone into the unheated soil. Insufficient air sweep may be indicated by a vapor dominated mass flow rate into the borehole, at least for the present configuration. Sufficient air flow through the heated zone must be provided to contain the contaminants within the heated zone.

The DOE requires that sensitive unclassified data be protected while being transmitted electronically. On most large networks it is difficult and expensive to provide the required level of physical protection. At Sandia National Laboratories, we are assembling the structure necessary to protect sensitive unclassified data using software-based encryption. This approach has the advantage that the data can be protected after arrival at its destination without additional investment While Sandia has expertise in cryptography, we had not used cryptography in this field. This discussion deals with the client-server model of file-based data exchange and interactive access to on-line data bases using Unix workstations, Macs and PCs.

The goal of the Offsite Demonstration Project for Mixed Waste Landfill Integrated Demonstration (MWLID)-developed environmental site characterization and remediation technologies is to facilitate the transfer, use, and commercialization of these technologies to the public and private sector. The meet this goal, the project identified environmental restoration needs of mixed waste and/or hazardous waste landfill owners (Native American, municipal, DOE, and DoD); documenting potential demonstration sites and the contaminants present at each site; assessing the environmental regulations that would effect demonstration activities; and evaluating site suitability for demonstrating MWLID technologies at the tribal and municipal sites identified. Eighteen landfill sites within a 40.2-km radius of Sandia National Laboratories are listed on the CERCLIS Site/Event Listing for the state of New Mexico. Seventeen are not located within DOE or DoD facilities and are potential offsite MWLID technology demonstration sites. Two of the seventeen CERCLIS sites, one on Native American land and one on municipal land, were evaluated and identified as potential candidates for off-site demonstrations of MWLID-developed technologies. Contaminants potentially present on site include chromium waste, household/commercial hazardous waste, volatile organic compounds, and petroleum products. MWLID characterization technologies applicable to these sites include Magnetometer Towed Array, Cross-borehole Electromagnetic Imaging, SitePlanner {trademark}/PLUME, Hybrid Directional Drilling, Seamist{trademark}/Vadose Zone Monitoring, Stripping Analyses, and x-ray Fluorescence Spectroscopy for Heavy Metals.

The industrial sector is the most complex and diverse segment of the US economy. There are more than 360,000 industrial facilities in the US, using tens of thousands of processes with millions of different pieces of equipment and employing nearly 30 million people to make hundreds of thousands of products. These facilities consume large quantities of raw materials and energy resources every year. Their waste streams, as well as the technology options for preventing them, are very specific not only to individual industries, but even to plants within the same industry that produce similar products. On October 24, 1992, President Bush signed the Energy Policy Act of 1992 (EPAct) into law as Public Law 102-486. Section 2108 of the Act requires the DOE to identify opportunities to demonstrate energy efficient pollution prevention technologies and processes. As a first step in DOE`s response to congress, Sandia National Laboratories lead a fast tracked project to compile information from the open literature, and pilot a process for identifying and prioritizing opportunity areas from industrial and federal experts. Approximately 300 documents were collected and reviewed, and knowledgeable individuals in government, universities, and trade associations were interviewed. A panel of experts from petroleum industry was assembled for the future opportunity assessments pilot These activities were conducted between May and August, 1993. Project background and results are summarized.

Human intrusion scenarios at the Waste Isolation Pilot Plant (WIPP) involve penetration of the repository and an underlying brine reservoir by a future borehole. Brine and gas from the brine reservoir and the repository may flow up the borehole and into the overlying Culebra formation, which is saturated with water containing different amounts of dissolved `solids resulting in a spatially varying density. Current modeling approaches involve perturbing a steady-state Culebra flow field by inflow of gas and/or brine from a breach borehole that has passed through the repository. Previous studies simulating steady-state flow in the Culebra have been done. One specific study by LaVenue et al. (1990) used the SWIFT 2 code, a single-phase flow and transport code, to develop the steady-state flow field. Because gas may also be present in the fluids from the intrusion borehole, a two-phase code such as TOUGH2 can be used to determine the effect that emitted fluids may have on the steady-state Culebra flow field. Thus a comparison between TOUGH2 and SWIFT2 was prompted. In order to compare the two codes and to evaluate the influence of gas on flow in the Culebra, modifications were made to TOUGH2. Modifications were performed by the authors to allow for element-specific values of permeability, porosity, and elevation. The analysis also used a new equation of state module for a water-brine-air mixture, EOS7 (Pruess, 1991), which was developed to simulate variable water densities by assuming a miscible mixture of water and brine phases and allows for element-specific brine concentration in the INCON file.

The Waste Isolation Pilot Plant (WIPP) is a US Department of Energy (DOE) research and development facility for the underground disposal of transuranic waste in southeastern New Mexico. The WIPP repository is located 655 m below the land surface in the lower portion of the Salado Formation, which is comprised of beds of pure and impure halite with thin interbeds of anhydrite and related clay seams. The regional dip of the Salado Formation is approximately 1{degree} southeast in the vicinity of the repository. The proposed waste storage area has eight waste disposal panels, each of which will contain seven rooms. The repository is designed to follow a single stratigraphic horizon. Due to the dip, the north end of the repository will be about 10 meters higher than the south end. Waste that is emplaced in the disposal rooms will generate gas due to microbial degradation, anoxic corrosion, and radiolysis. Brine inflow to the rooms from the surrounding Salado Formation may significantly influence the gas generation rate and the total amount of gas generated. The salt surrounding the repository will creep in response to the excavation, reducing the room volume. Gas generation in the room may increase the pressure sufficiently to drive brine and gas into the surrounding Salado Formation. Migration of gas and brine in the Salado is an important factor in evaluating the performance of the repository. The studies summarized in this paper have. been performed to evaluate brine and gas flow processes in the WIPP disposal system and to identify some of the important processes. These studies are done in support of, but are not part of, the formal Performance Assessment (PA) effort. Because of probabilistic and system-scale requirements, the PA effort uses the Sandia-developed BRAGFLO (BRine And Gas FLOw) code for multiphase flow calculations.

The Waste Isolation Pilot Plant (WIPP) is a US Department of Energy facility designed to demonstrate the safe underground disposal of transuranic waste. Following waste emplacement, each room will be backfilled with crushed salt. Due to deviatoric stress introduced by excavation, the walls of the waste disposal rooms in the repository will deform over time, consolidating waste containers and salt backfill, thereby decreasing the void volume of the repository. Long-term repository assessment must consider the processes of gas generation, room closure and expansion due to salt creep, and multiphase (brine and gas) fluid flow, as well as the complex coupling between these three processes. Stone (1992) used the mechanical creep closure code SANCHO to simulate the closure of a single, perfectly sealed disposal room filled with waste and backfill. The results of the SANCHO f-series simulations provide a relationship between gas generation, room closure, and room pressure. Several methods for coupling this relationship with multiphase fluid flow into and out of a room were examined by Freeze et al. TOUGH2 was employed to couple the processes of gas generation, room closure/consolidation, and multiphase brine and gas flow. Two empirically-based methods for approximating salt creep and room consolidation were implemented in TOUGH2: the pressure-time-porosity line interpolation approach and the fluid-phase-salt approach. Both approaches utilized links to the SANCHO f-series simulation results to calculate room-void-volume changes with time during a simulation.

The Waste Isolation Pilot Plant (WIPP) is a US Department of Energy research and development facility for the underground disposal of transuranic waste from US defense-related activities. The WIPP repository is located within the Salado Formation, which is comprised of beds of pure and impure halite with thin interbeds of anhydrite and related clay seams. This formation is brine saturated with a pore pressure of approximately 12.5 MPa at the repository horizon. The Salado Formation dips gently southeast, on the average approximately 1{degree}, with steeper dips locally. Elevated repository pressures, caused by gas generated as emplaced waste corrodes and degrades, may drive brine and gas out of the repository into the surrounding formation. Stratigraphic dip may cause increased brine inflow to the repository through countercurrent flow in the interbeds and enhanced gas migration distances in the updip direction due to buoyancy. Two-dimensional simulations of isolated WIPP repository room have been performed using TOUGH2 for horizontal and 1{degree} dipping stratigraphy. The impact of dip on multiphase flow at the WIPP may be significant. With dip, an additional mechanism for brine inflow may occur, namely the formation of a cell of countercurrent brine and gas flow in the interbeds. The additional volume of brine inflow resulting from the countercurrent flow cell may be of similar magnitude to brine inflow without dip. Therefore, dip must be included in any repository model to include the countercurrent brine inflow mechanism. Gas migration may also be significantly influenced due to dip. Gas migration distances may increase dramatically with preferential migration updip.

MELCOR models the progression of severe accidents in light water reactor nuclear power plants. Recent efforts in MELCOR development to incorporate CORCON-Mod3 models for core-concrete interactions, new models for advanced reactors, and improvements to several other existing models have resulted in release of MELCOR 1.8.3. In addition, continuing efforts to expand the code assessment database have filled in many of the gaps in phenomenological coverage. Efforts are now under way to develop models for chemical interactions of fission products with structural surfaces and for reactions of iodine in the presence of water, and work is also in progress to improve models for the scrubbing of fission products by water pools, the chemical reactions of boron carbide with steam, and the coupling of flow blockages with the hydrodynamics. Several code assessment analyses are in progress, and more are planned.

Sandia National Laboratories performs R and D in structural dynamics and vibration suppression for precision applications in weapon systems, space, underwater, transportation and civil structures. Over the last decade these efforts have expanded into the areas of active vibration control and ``smart`` structures and material systems. In addition, Sandia has focused major resources towards technology to support weapon product development and agile manufacturing capability for defense and industrial applications. This paper will briefly describe the structural dynamics modeling and verification process currently in place at Sandia that supports vibration control and some specific applications of these techniques to manufacturing in the areas of lithography, machine tools and flexible robotics.

To improve process reliability and deposition methods, it is essential to identify the rate-limiting step in TEOS-based SiO{sub 2} CVD and its dependence on process conditions. For this purpose, experiments designed to evaluate by-product inhibition effects and to identify the rate-limiting step in TEOS decomposition have been carried out in a research reactor using GCMS and FTIR. By repetitively sampling a series of reactions in which TEOS was first mixed with ethylene, ethanol, and water in the gas-phase, GCMS was used to show clearly that these reaction by-products do not inhibit the heterogeneous reaction step on SiO{sub 2} at 1,000K. FTIR was used to determine that ethoxy groups from TEOS dissociative chemisorption have a significant lifetime on the SiO{sub 2} surface at CVD temperatures and have an activation energy for decomposition of 16kcal/mol{+-}4kcal/mol. This is much higher than the activation energy of 6 kcal/mol reported for the initial chemisorption step and is near the 22 kcal/mol reported for the overall activation energy for SiO{sub 2} deposition in a cold-wall reactor. These results suggest that, whether or not surface ethoxy groups inhibit TEOS reactions, their decomposition may be directly related to the rate-limiting step in SiO{sub 2} deposition.

If current plans are realized, within the next few years, an extraordinary set of coordinated research efforts focusing on energy flows in the Arctic will be implemented. All are motivated by the prospect of global climate change. SHEBA (Surface Energy Budget of the Arctic Ocean), led by the National Science Foundation (NSF) and the Office of Naval Research (ONR), involves instrumenting an ice camp in the perennial Arctic ice pack, and taking data for 12--18 months. The ARM (Atmospheric Radiation Measurement) North Slope of Alaska and Adjacent Arctic Ocean (NSA/AAO) Cloud and Radiation Testbed (CART) focuses on atmospheric radiative transport, especially in the presence of clouds. The NSA/AAO CART involves instrumenting a sizeable area on the North Slope of Alaska and adjacent waters in the vicinity of Barrow, and acquiring data over a period of about 10 years. FIRE (First ISCCP [International Satellite Cloud Climatology Program] Regional Experiment) Phase 3 is a program led by the National Aeronautics and Space Administration (NASA) which focuses on Arctic clouds, and which is coordinated with SHEBA and ARM. FIRE has historically emphasized data from airborne and satellite platforms. All three program anticipate initiating Arctic data acquisition during spring, 1997. In light of his historic opportunity, the authors discuss a strawman atmospheric radiative transfer experimental plan that identifies which features of the radiative transport models they think should be tested, what experimental data are required for each type of test, the platforms and instrumentation necessary to acquire those data, and in general terms, how the experiments could be conducted. Aspects of the plan are applicable to all three programs.

This paper describes an application of Sandia`s non-contact capacitive sensing technology for collision avoidance during the manufacturing of rocket engine thrust chambers. The collision avoidance system consists of an octagon shaped collar with a capacitive proximity sensor mounted on each face. The sensors produced electric fields which extend several inches from the face of the collar and detect potential collisions between the robot and the workpiece. A signal conditioning system processes the sensor output and provides varying voltage signals to the robot controller for stopping the robot.

The introduction of alternative, non-lead bearing solders into electronic assemblies requires a thorough investigation of product manufacturability and reliability. Both of these attributes can be impacted by the excessive growth of intermetallic compound (IMC) layers at the solder/substrate interface. An extensive study has documented the stoichiometry and solid state growth kinetics of IMC layers formed between copper and the lead-free solders: 96.5Sn-3.5Ag (wt.%), 95Sn-5Sb, 100Sn, and 58Bi-42Sn. Aging temperatures were 70--205 C for the Sn-based solders and 55--120 C for the Bi-rich solder. Time periods were 1--400 days for all of the alloys. The Sn/Cu, Sn-Ag/Cu, and Sn-Sb/Cu IMC layers exhibited sub-layers of Cu{sub 6}Sn{sub 5} and Cu{sub 3}Sn; the latter composition was present only following prolonged aging times or higher temperatures. The total layer growth exhibited a time exponent of n = 0.5 at low temperatures and a value of n = 0.42 at higher temperatures in each of the solder/Cu systems. Similar growth kinetics were observed with the low temperature 58Bi-42Sn solder; however, a considerably more complex sub-layer structure was observed. The kinetic data will be discussed with respect to predicting IMC layer growth based upon solder composition.

Optoelectronic and photonic devices hold great promise for high data-rate communication and computing. Their wide implementation was limited first by the device technologies and now suffers due to the need for high-precision packaging that is mass-produced. The use of photons as a medium of communication and control implies a unique set of packaging constraints that are highly driven by the need for micron and even sub-micron alignments between photonic devices and their transmission media. Current trends in optoelectronic device packaging are reviewed and future directions are identified both for free-space (3-dimensional) and guided-wave (2-dimensional) photonics. Emphasis will be placed on the special needs generated by increasing levels of device integration.

Sandia Labs` mobile tracking systems have only one moving part. The double gimballed 18 inch diameter beryllium mirror is capable of constant tracking velocities up to 5 rads/sec in both axes, and accelerations to 150 rads/sec/sec in both axes. Orthogonality is <10 microradians. The mirror directs the 488 and 514 nm wavelength CW laser beams to adhesive-backed reflective material applied to the test unit. The mirror catches the return beam and visual image, directing the visual image to three camera bays, and the return beam to an image dissector behind an 80 inch gathering telescope. The image dissector or image position sensor is a photomultiplier with amplifying drift tube and electron aperture and its associated electronics. During the test, the image dissector scan senses the change in position of the reflective material and produces signals to operate the azimuth and elevation torque motors in the gimbal assembly. With the help of 1 1/8 inch diameter azimuth and elevation galvonometer steering mirrors in the optical path, the laser beam is kept on the target at extremely high velocities. To maintain a constant return signal strength, the outgoing beam is run through a microprocessor controlled beam focusing telescope.

Geologic Site Characterization should be a dynamic, continuing process, not an event. Its successes and failures are legion and can make or break an operator. A balanced approach must be sought to provide adequate information for safety of operations, neither slighting nor overdoing the effort. The evolving nature of study methods and geologic knowledge essentially mandates that characterization efforts be reviewed periodically. However, indifference, nonchallance, and even outright disdain describe attitudes witnessed in some circles regarding this subject. Unawareness may also be a factor. Unfortunately, several unanticipated events have led to severe economic consequences for the operators. The hard-learned lessons involving several unanticipated geotechnical occurrences at several Gulf Coast salt domes are discussed. The ultimate benefit of valuing site characterization efforts may be more than just enhanced safety and health--costs not expended in lost facilities and litigation can become profit.

In order to provide needed security assurances for traffic carried in Asynchronous Transfer Mode (ATM) networks, methods of protecting the integrity and privacy of traffic must be employed. Cryptographic methods can be used to assure authenticity and privacy, but are hard to scale and the incorporation of these methods into computer networks can severely impact functionality, reliability, and performance. To study these trade-offs, a research prototype encryptor/decryptor is under development. This prototype is to demonstrate the viability of implementing certain encryption techniques in high speed networks by processing Asynchronous Transfer Mode (ATM) cells in a SONET OC-3 payload. This paper describes the objectives and design trade-offs intended to be investigated with the prototype. User requirements for high performance computing and communication have driven Sandia to do work in the areas of functionality, reliability, security, and performance of high speed communication networks. Adherence to standards (including emerging standards) achieves greater functionality of high speed computer networks by providing wide interoperability of applications, network hardware, and network software.

Many advanced light water reactor (ALWR) concepts proposed for the next generation of nuclear power plants rely on passive systems to perform safety functions, rather than active systems as in current reactor designs. These passive systems depend to a great extent on physical processes such as natural circulation for their driving force, and not on active components, such as pumps. An NRC-sponsored study was begun at Sandia National Laboratories to develop and implement a methodology for evaluating ALWR passive system reliability in the context of probabilistic risk assessment (PRA). This report documents the first of three phases of this study, including methodology development, system-level qualitative analysis, and sequence-level component failure quantification. The methodology developed addresses both the component (e.g. valve) failure aspect of passive system failure, and uncertainties in system success criteria arising from uncertainties in the system`s underlying physical processes. Traditional PRA methods, such as fault and event tree modeling, are applied to the component failure aspect. Thermal-hydraulic calculations are incorporated into a formal expert judgment process to address uncertainties in selected natural processes and success criteria. The first phase of the program has emphasized the component failure element of passive system reliability, rather than the natural process uncertainties. Although cursory evaluation of the natural processes has been performed as part of Phase 1, detailed assessment of these processes will take place during Phases 2 and 3 of the program.

Full-scale fire characterization tests are becoming less frequent due to cost restrictions and environmental concerns. This trend, combined with significant advances in fire field modeling, has resulted in an increased effort to perform well-designed experiments which support the development and validation of numerical tools. In pursuit of improved fire characterization, large-fire measurement techniques in large-scale (D > 2m) fires are reviewed in this work. Primary attention is focused on the measurement of temperature and heat flux. Additional measurements of quantities such as soot volume fraction, soot emission temperature, and gas species are also addressed. Issues relating to the use of existing techniques, and methods for improving and interpreting the results from existing measurement techniques are presented. Alternate techniques for fire characterization and needs for development of advanced measurement technology are also briefly discussed.

A series of tests investigating dynamic pulse buckling of a cylindrical shell under axial impact is compared to several 2D and 3D finite element simulations of the event. The purpose of the work is to investigate the performance of various analysis codes and element types on a problem which is applicable to radioactive material transport packages, and ultimately to develop a benchmark problem to qualify finite element analysis codes for the transport package design industry. During the pulse buckling tests, a buckle formed at each end of the cylinder, and one of the two buckles became unstable and collapsed. Numerical simulations of the test were performed using PRONTO, a Sandia developed transient dynamics analysis code, and ABAQUS/Explicit with both shell and continuum elements. The calculations are compared to the tests with respect to deformed shape and impact load history.

This paper presents an analysis of the Chemical Vapor Deposition of diamond thin films in a direct-current (dc) arc-jet reactor. The analysis discussed here includes a model of the performance of the arc-jet hydrogen excitation source, chemistry in the free-stream region, diffusive transport and chemistry in the boundary layer and at the surface. The surface chemistry model includes pathways for deposition of diamond, as well as creation of defects in the diamond lattice.

An overview is presented of work on strained InAsSb heterostructures and infrared emitters. InAsSb/InGaAs strained-layer superlattices (SLS) and InAsSb quantum wells were grown by metal-organic chemical vapor deposition and characterized using magneto-photoluminescence. LEDs and lasers with InAsSb heterostructure active regions are described.

When a system is being designed, one of the system requirements will specify the intended life for the system, which is called the design life, the system life, the expected operational lifetime, or the service life. This specification is an important driver of the total life cycle cost. This paper suggests how specifying this design life affects the design and the cost of the system.

Over the next decade, the US Department of Energy (DOE) must retire and dismantle many nuclear weapon systems. In support of this effort, Sandia National Laboratories (SNL) has developed the Hazard Separation System (HSS). The HSS combines abrasive waterjet cutting technology and real-time radiography. Using the HSS, operators determine the exact location of interior, hazardous sub-components and remove them through precision cutting. The system minimizes waste and maximizes the recovery of recyclable materials. During 1994, the HSS was completed and demonstrated. Weapon components processed during the demonstration period included arming, fusing, and firing units; preflight control units; neutron generator subassemblies; and x-units. Hazards removed included radioactive krytron tubes and gap tubes, thermal batteries, neutron generator tubes, and oil-filled capacitors. Currently, the HSS is being operated at SNL in a research and development mode to facilitate the transfer of the technology to other DOE facilities for support of their dismantlement operations.