Publications

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

This paper presents the ongoing development of a wireline tool designed to detect and quantify inflows from feed zones in geothermal wells based on measurement of chloride. The tool aims to characterize stimulation events in Enhanced Geothermal Systems (EGS) wells at Utah FORGE (Frontier Observatory for Research in Geothermal Energy) and other EGS sites. Successful development of the chloride tool would greatly improve production monitoring of the fractures and enable proactive prescription of additional stimulations over the life of the field, thus helping to improve EGS commercial feasibility. The recent development of the chloride tool involves an Ion Specific Electrodes (ISE) probe and a reference electrode, assembled through a labor-intensive process, and designed to withstand downhole conditions for field deployment. Through laboratory experiments and numerical simulations, the tool demonstrated efficacy in identifying changes in chloride concentration, indicating its utility in feed zone detection. However, the impact of impedance on voltage measurements and discrepancies between laboratory and simulation results presented opportunities for further refinement. Notably, simulation results consistently underestimated actual chloride concentration by 30-40%, suggesting the need for compensatory calibration. Comparisons between different simulation software indicated that ANSYS was more accurate in replicating key features observed in laboratory experiments. Moreover, a Machine Learning (ML) approach was used to improve feed zone location detection and inflow rate measurement, utilizing Random Forest and Light Gradient Boosting Machine (LGBM) models, which delivered high performance scores. Thus, the chloride tool's recent development and integration with machine learning approaches offer promising advancements in feed zone identification and quantification.

The DOE GeoVision study identified that Enhanced Geothermal Systems (EGS) resources have the potential to provide a significant contribution toward achieving the goal of converting the U.S. electricity system to 100% clean energy over the next few decades. To further the implementation of commercial EGS development, DOE's Geothermal Technologies Office (GTO) initiated the Wells of Opportunity (WOO) Amplify program, where unproductive wells in selected geothermal fields are to be stimulated using EGS technologies, resulting in increased power production from these resources. As part of the WOO-Amplify project, GTO assembled the Amplify Monitoring Team (AMT), whose role is to provide in-field and near-field seismic monitoring design, deployment and data analysis for stimulations under the WOO-Amplify initiative. This team, consisting of scientists and engineers from Lawrence Berkeley National Laboratory (LBNL), Sandia National Laboratories (SNL), and the US Geological Survey (USGS), is working with WOO-Amplify EGS Operators in Nevada to develop and deploy optimized seismic monitoring systems at four geothermal fields where WOO-Amplify well stimulations are planned: Don A. Campbell, Tungsten Mountain and Jersey Valley operated by Ormat Technologies, and Patua operated by Cyrq Patua Acquisition Company LLC. Using geologic and geophysical field data provided by the WOO-Amplify teams, the focus of the AMT is to develop advanced simulation and modeling techniques, design targeted seismic monitoring arrays, develop innovative and cost-effective methodologies for drilling seismic monitoring boreholes, deploy effective seismic instrumentation, and facilitate the use of microseismic data to monitor well stimulation and flow within the geothermal reservoir. Realtime seismic data from the four WOO-Amplify sites will be streamed to a publicly accessible Amplify Monitoring website. AMT's advanced simulations and template matching techniques applied during pre-stimulation phases can help improve understanding of potential seismic hazard and inform the Operator's Induced Seismicity Mitigation Protocol (ISMP). Over the next two years, AMT will be drilling, instrumenting, and recording seismic data at the WOO-Amplify field sites, telemetering the seismic waveform data to AMT's central processing system and providing the processed location data to the WOO Amplify Operator teams. These data and monitoring systems will be critical for effective monitoring of the effects of planned well stimulation and extended flow tests during the next stage of the WOO-Amplify project.

Geothermal energy has been underutilized in the U.S., primarily due to the high cost of drilling in the harsh environments encountered during the development of geothermal resources. Drilling depths can approach 5,000 m with temperatures reaching 170 C. In situ geothermal fluids are up to ten times more saline than seawater and highly corrosive, and hard rock formations often exceed 240 MPa compressive strength. This combination of extreme conditions pushes the limits of most conventional drilling equipment. Furthermore, enhanced geothermal systems are expected to reach depths of 10,000 m and temperatures more than 300 °C. To address these drilling challenges, Sandia developed a proof-of-concept tool called the auto indexer under an annual operating plan task funded by the Geothermal Technologies Program (GTP) of the U.S. Department of Energy Geothermal Technologies Office. The auto indexer is a relatively simple, elastomer-free motor that was shown previously to be compatible with pneumatic hammers in bench-top testing. Pneumatic hammers can improve penetration rates and potentially reduce drilling costs when deployed in appropriate conditions. The current effort, also funded by DOE GTP, increased the technology readiness level of the auto indexer, producing a scaled prototype for drilling larger diameter boreholes using pneumatic hammers. The results presented herein include design details, modeling and simulation results, and testing results, as well as background on percussive hammers and downhole rotation.

Drilling systems that use downhole rotation must react torque either through the drill-string or near the motor to achieve effective drilling performance. Problems with drill-string loading such as buckling, friction, and twist become more severe as hole diameter decreases. Therefore, for small holes, reacting torque downhole without interfering with the application of weight-on-bit, is preferred. In this paper, we present a novel mechanism that enables effective and controllable downhole weight on bit transmission and torque reaction. This scalable design achieves its unique performance through four key features: (1) mechanical advantage based on geometry, (2) direction dependent behavior using rolling and sliding contact, (3) modular scalability by combining modules in series, and (4) torque reaction and weight on bit that are proportional to applied axial force. As a result, simple mechanical devices can be used to react large torques while allowing controlled force to be transmitted to the drill bit. We outline our design, provide theoretical predictions of performance, and validate the results using full-scale testing. The experimental results include laboratory studies as well as limited field testing using a percussive hammer. These results demonstrate effective torque reaction, axial force transmission, favorable scaling with multiple modules, and predictable performance that is proportional to applied force.

Wellbore integrity is a significant problem in the U.S. and worldwide, which has serious adverse environmental and energy security consequences. Wells are constructed with a cement barrier designed to last about 50 years. Indirect measurements and models are commonly used to identify wellbore damage and leakage, often producing subjective and even erroneous results. The research presented herein focuses on new technologies to improve monitoring and detection of wellbore failures (leaks) by developing a multi-step machine learning approach to localize two types of thermal defects within a wellbore model, a prototype mechatronic system for automatically drilling small diameter holes of arbitrary depth to monitor the integrity of oil and gas wells in situ, and benchtop testing and analyses to support the development of an autonomous real-time diagnostic tool to enable sensor emplacement for monitoring wellbore integrity. Each technology was supported by experimental results. This research has provided tools to aid in the detection of wellbore leaks and significantly enhanced our understanding of the interaction between small-hole drilling and wellbore materials.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

One of the greatest barriers to geothermal energy expansion is the high cost of drilling during exploration, assessment, and monitoring. Microhole drilling technology—small-diameter 2–4 in. (~5.1–10.2 cm) boreholes—is one potential low-cost alternative for monitoring and evaluating bores. However, delivering high weight-on-bit (WOB), high torque rotational horsepower to a conventional drill bit does not scale down to the hole sizes needed to realize the cost savings. Coiled tube drilling technology is one solution, but these systems are limited by the torque resistance of the coil system, helical buckling in compression, and most of all, WOB management. The evaluation presented herein will: (i) evaluate the technical and economic feasibility of low WOB technologies (specifically, a percussive hammer and a laser-mechanical system), (ii) develop downhole rotational solutions for low WOB drilling, (iii) provide specifications for a low WOB microhole drilling system, (iv) implement WOB control for low WOB drilling, and (v) evaluate and test low WOB drilling technologies.

The well documented promise of microholes has not yet matched expectations. A fundamental issue is that delivering high weight-on-bit (WOB), high torque rotational horsepower to a conventional drill bit does not scale down to the hole sizes necessary to realize the envisioned cost savings. Prior work has focused on miniaturizing the various systems used in conventional drilling technologies, such as motors, steering systems, mud handling and logging tools, and coiled tubing drilling units. As smaller diameters are targeted for these low WOB drilling technologies, several associated sets of challenges arise. For example, energy transfer efficiency in small diameter percussive hammers is different than conventional hammers. Finding adequate methods of generating rotation at the bit are also more difficult. A low weight-on-bit microhole drilling system was proposed, conceived, and tested on a limited scale. The utility of a microhole was quantified using flow analyses to establish bounds for usable microholes. Two low weight-on-bit rock reduction techniques were evaluated and developed, including a low technology readiness level concept in the laser-assisted mechanical drill and a modified commercial percussive hammer. Supporting equipment, including downhole rotation and a drill string twist reaction tool, were developed to enable wireline deployment of a drilling assembly. Although the various subsystems were tested and shown to work well individually in a laboratory environment, there is still room for improvement before the microhole drilling system is ready to be deployed. Ruggedizing the various components will be key, as well as having additional capacity in a conveyance system to provide additional capacity for pullback and deployment.

Depth of cut (DOC) refers to the depth a bit penetrates into the rock during drilling. This is an important quantity for estimating drilling performance. In general, DOC is determined by dividing the rate of penetration (ROP) by the rotational speed. Surface based sensors at the top of the drill string are used to determine both ROP and rotational speed. However, ROP measurements using top-hole sensors are noisy and often require taking a derivative. Filtering reduces the update rate, and both top-hole linear and angular velocity can be delayed relative to downhole behavior. In this work, we describe recent progress towards estimating ROP and DOC using down-hole sensing. We assume downhole measurements of torque, weight-on-bit (WOB), and rotational speed and anticipate that these measurements are physically realizable. Our hypothesis is that these measurements can provide more rapid and accurate measures of drilling performance. We examine a range of machine learning techniques for estimating ROP and DOC based on this local sensing paradigm. We show how machine learning can provide rapid and accurate performance when evaluated on experimental data taken from Sandia's Hard Rock Drilling Facility. These results have the potential to enable better drilling assessment, improved control, and extended component life-times.

Abstract not provided.

Abstract not provided.

We describe the development and benchtop prototype performance characterization of a mechatronic system for automatically drilling small diameter holes of arbitrary depth, to enable monitoring the integrity of oil and gas wells in situ. The precise drilling of very small diameter, high aspect ratio holes, particularly in dimensionally constrained spaces, presents several challenges including bit buckling, limited torsional stiffness, chip clearing, and limited space for the bit and mechanism. We describe a compact mechanism that overcomes these issues by minimizing the unsupported drill bit length throughout the process, enabling the bit to be progressively fed from a chuck as depth increases. When used with flexible drill bits, holes of arbitrary depth and aspect ratio may be drilled orthogonal to the wellbore. The mechanism and a conventional drilling system are tested in deep hole drilling operation. The experimental results show that the system operates as intended and achieves holes with substantially greater aspect ratios than conventional methods with very long drill bits. The mechanism enabled successful drilling of a 1/16" diameter hole to a depth of 9", a ratio of 144:1. Dysfunctions prevented drilling of the same hole using conventional methods.

The ability to rapidly drill through diverse, layered materials can greatly enhance future mine-rescue operations, energy exploration, and underground operations. Pneumatic-percussive drilling holds great promise in this area due to its ability to penetrate very hard materials and potential for portability. Currently such systems require expert operators who require extensive training. We envision future applications where first responders who lack such training can still respond rapidly and safely perform operations. Automated techniques can reduce the dependence on expert operators while increasing efficiency and safety. However, current progress in this area is restricted by the difficulty controlling such systems and the complexity of modeling percussive rock-bit interactions. In this work we develop and experimentally validate a novel intelligent percussive drilling architecture that is tailored to autonomously operate in diverse, layered materials. Our approach combines low-level feedback control, machine learning-based material classification, and on-line optimization. Our experimental results demonstrate the effectiveness of this approach and illustrate the performance benefits over conventional methods.