Publications

Results 100726–100750 of 100,993

Search results

Jump to search filters

Electrohydrodynamically driven, large-area liquid metal ion source for inertial confinement fusion

Pregenzer, Arian L.

Analysis of the electrohydrodynamic (EHD) equations of motion of a planar liquid-lithium surface in the presence of a normal electric field suggest that liquid lithium may provide a large-area ion source for intense ion-beam diodes. Such sources are being developed for the Particle Beam Fusion Accelerator II at Sandia National Laboratories. In this paper, theoretical and experimental studies of the planar EHD ion source will be reviewed. When a planar liquid surface is subjected to an electric field of sufficient magnitude, EHD instabilities produce an array of cusps on the surface. The electric field enhancement at the apex of each cusp is sufficient to permit field evaporation of ions. The time delay between application of the electric field and ion emission depends on the magnitude and rate of increase of the applied electric field, and on the initial amplitude of the surface perturbation. Above 10 MV/cm, theory indicates that field emission will occur on a nanosecond time scale and that the characteristic spacing of emitters will be less than one micrometer. At these fields, the source should have an intrinsic divergence of less than 6 mrad and the effects of space charge from neighboring emitters should not inhibit emission significantly. Experimental measurements of wavelength and cusp-formation-times for water and ethanol at electric fields near the critical field for instability have agreed well with theory. 11 refs., 4 figs.

More Details

Formation, motion and high temperature superconductivity of large bipolarons

Emin, David J.

Bipolaronic superconductivity requires two exceptional circumstances. First, at least some charge carriers must form bipolarons. Second, these bipolarons must be mobile (move coherently). However, beyond quasi-one-dimensional electronic systems, bipolarons have heretofore always been found to be ''small.'' Small (bi)polarons are very compact (bi)polarons that localize rather than move coherently. Thus, small bipolarons are not suitable carriers for bipolaronic superconductivity. However, in analogy with the case of large polarons, less compact bipolarons, ''large'' bipolarons, are expected to be mobile. These observations lead one to ask if and when large bipolarons can form in multi-dimensional electronic systems. Here the results of studies of the formation, motion and superconductivity of large bipolarons are summarized. 5 refs.

More Details

Scattering from fractals

Hurd, A.J.

The realization that structures in Nature often can be described by Mandelbrot's ''fractals'' has led to a revolution in many areas of physics. The interaction of waves with fractal systems has, understandably, become intensely studied since scattering is the method of choice to probe delicate fractal structures such as chainlike particle aggregates. Not all of these waves are electromagnetic: neutron scattering, for example, is an important complementary tool to structural studies by x-ray and light scattering. Since the phenomenology of small-angle neutron scattering (SANS), as it is applied to fractal systems, is identical to that of small-angle x-ray scattering (SAXS), it falls within the scope of this Working Paper. 9 refs.

More Details

Design basis for resistance to shock and vibration

Glass, R.E.; Gwinn, K.W.

Sandia National Laboratories, in conjunction with its participation in the American National Standards Institute (ANSI) writing groups, has undertaken to provide an experimental and analytical basis for the design of components of radioactive materials packages to resist normal transport shock and vibration loads. Previous efforts have resulted in an overly conservative shock spectra description of the loads in the tie-downs and cask attachment points anticipated during normal shipment. The present effort is aimed at predicting the actual loads so that the design basis can be accurately determined. This goal is being accomplished with road simulator and over-the-road tests and the development of an analytical model. This model is used to parametrically evaluate and envelop the transportation systems' responses. The parameters to be varied include damping, stiffness, geometry, and cargo mass. The over-the-road tests provide operational data that are used to validate the selection of environments for the road simulator tests. The road simulator tests provide verification for the model. This verification is accomplished since the road simulator tests provide not only the system response which can be measured in over-the-road tests but also the system input. Finally, when the model has been verified, it can be used to vary parameters to envelop a wide range of normal transport conditions.

More Details

Security command, control, and display systems development status

Waddoups, I.G.

Sandia National Laboratories has developed a variety of command, control, and display systems for a broad spectrum of users. This paper briefly describes the latest systems developed for the Department of Energy (DOE), the Department of Defense (DOD), and the Department of State (DOS) applications. Applications covered vary from relatively small facilities to large complex sites. 3 refs., 6 figs.

More Details

Techniques for the detection of explosives

Novel methods/techniques for the detection of explosives are briefly described. The methods include vapor detection, preconcentrators, chemiluminescence detectors and microwave detectors. (CBS)

More Details

A fully automated, single-connection tester for T/R modules

Sloan, George R.

An inherent aspect of active array radars is the use of large numbers -- typically hundreds -- of transmit/receive (T/R) modules. The implementation of this technology at Sandia has created new challenges for the tester designer. Foremost among these challenges is the need to design T/R module testers which can accommodate such large numbers of devices-under-test (DUTs). This task is complicated by the fact that state-of-the-art T/R modules are extremely sophisticated and require a broad spectrum of tests for adequate evaluation. The Sandia T/R module operates in Ku band and consists of a transmitter, receiver, programmable phase shifter, programmable attenuator, modulator, switched limiter, and gate-array controller. The programmable phase shifter is common to both the transmitter and receiver, but the attenuator is unique to the receiver. The instruments required for the tests include a network analyzer, a spectrum analyzer, a noise figure meter, a peak-power meter, and an automated tuner system. The key to a successful tester is in integrating all of the above instruments such that the desired measurements can all be performed from a single, two-port, tester-to-DUT connection. The natural consequence of such a design is that some measurements will have to be de-embedded from the integrated test setup. This paper addresses both the tester's instrument integration and the resulting de-embedding concerns. 2 figs.

More Details

Gamma-ray emission probabilities of the daughters of /sup 238/U

Scott, H.L.; Marlow, K.W.

In the past several years a wealth of decay data has been obtained and reported, much of it in ''Decay Data of the Transactinium Nuclides'', IAEA Technical Reports Series No. 261 (1986). The decay data for the daughters of /sup 238/U have been notable by their absence in such compilations; and since there is a need for such data, a set of experiments has been performed to measure the gamma-ray emission probabilities. Uranium samples of known mass and isotopic concentration in aqueous solution are analyzed with a high-purity germanium gamma-ray spectrometer. Various samples have also in solution multi-line calibration sources with well-known relative intensities. The well-known emission probabilities of the /sup 235/U gamma rays are used to provide an absolute intensity reference. Since self-absorption of the sample is included in the effective detector efficiency, there is not need for a separate calculation of this absorption. Gamma-ray emission probabilities for the energy range 63 to 1938 keV are reported. Sources of error, including those in the efficiency curve, are discussed. 11 refs., 5 figs., 4 tabs.

More Details

Photocurrent variability of discrete bipolar devices

Huffman, D.D.; Wrobel, T.F.; Hospelhorn, R.L.; Willis, D.

Thirty-nine (39) bipolar device lots (195 devices) were tested for peak photocurrent. Difference in average photocurrent between lots of same device types was less than a factor of three in all cases. 4 figs.

More Details

Investigation of cask contamination weeping: A progress report

Bennett, Phil C.

Spent fuel transportation casks have arrived at final destinations with removable surface contamination levels in excess of regulatory limits, although pre-transport surveys indicated removable contamination levels were well below these limits. The control of this in-transit ''weeping'' of surface contamination on pool-loaded spent fuel transport casks is of particular concern to both the US Department of Energy (DOE) and the US Nuclear Regulatory Commission (NRC). Weeping, also known as sweating, is the transformation of fixed radioactive particulates on an exterior surface of transport cask to a removable state. Weeping has been observed sometime after a cask is removed from a fuel pool and decontaminated. The weeping phenomenon is countered by time-consuming operational constraints and procedures which have a significant impact on cask turnaround times and occupational exposures at transport facilities. Further, the arrival of a contaminated cask results in negative public perceptions that are inconsistent with DOE and NRC goals. The objectives in resolving the technical issue of weeping are to identify specific causes of the weeping phenomenon, then to implement new cask design requirements and supporting operational procedures which will limit or inhibit the accumulation, retention, and in-transit conversion of fixed surface contamination. 6 figs., 1 tab.

More Details

TRACE - Tamper Resistant Authenticated Camera Enclosure

Skogmo, D.

To protect a security instrument such as a television camera from subversion by signal substitution, the data from the instrument are digitized and submitted to an authenticator. The digital data may then be transmitted in the clear over a non-secure medium. Appended to the data is a 10-bit authentication value based on the values of the data and a random authentication number. At the receiving end, the data are submitted to an identical authenticator. If it produces the same authentication value, the data are authentic. Such a scheme can only work if the instrument, the authenticator, and the link between them can be protected from tampering. This paper describes a tamper resistant container designed to protect a data authenticator and television camera against an adversary having sophisticated resources and complete design information. The container's design includes active elements to detect and report intrusion attempts in real time. It also includes passive elements to indicate upon later inspection that the container had been violated. 1 ref., 2 figs.

More Details

Field evaluation of new exterior video motion detection systems

Malone, Timothy P.

Considerable interest has been generated within the past several years concerning the use of new generation video motion detection (VMD) systems as exterior intrusion sensors. The new generation VMD systems advertise advanced video signal processing techniques and algorithms which are aimed at rejecting nuisance alarm sources inherent to the uncontrolled exterior environment. Older generation VMD systems used in an exterior environment tend to have high nuisance alarm rates. The high nuisance alarm rates of the older systems made them generally unacceptable for use as an exterior sensor. This paper discusses the results of continued field testing of new generation VMD systems. Field tests were conduced in an exterior perimeter zone application and an application looking at the exterior entrance of a building. Test results include each VMD system's detection capabilities and nuisance alarm characteristics for each particular application. Also site considerations such as lighting, cameras and zone layouts for exterior video motion detection are discussed. 1 ref., 14 figs., 1 tab.

More Details

The PVF2 piezoelectric polymer shock stress sensor: System characterization for application under field test conditions

Reed, R.P.; Greenwoll, J.I.

The piezoelectric polymer, polyvinylidene di-fluoride (PVDF or PVF2), properly processed by the proprietary Bauer technique, is a material for a transducing element that can be used for a wide variety of stress, pressure, or temperature related measurements. Its versatility as a sensor requires especially careful attention to the special requirements for associated gauge packaging, installation, signal conditioning, recording, and analysis that are imposed by the particular diverse test conditions. Most applications reported to date have been for tests performed under laboratory conditions. But, the PVDF sensor has also been successfully used for stress wave measurement under adverse and often hostile field test conditions that require the use of lengthy transmission lines and allow only limited recording capability. This paper discusses one crucial aspect of field application -- measuring system characterization, and correction of signals distorted by systems of marginal frequency capability. 11 refs., 7 figs.

More Details

Radiation-oxidation of polymers

Clough, Roger L.

Radiation effects on polymers in the presence of air are characterized by complicated phenomena such as dose-rate effects and post-irradiation degradation. Most applications of polymeric materials in radiation environments involve air atmospheres. Taking account of oxidation effects and time-dependent phenomena is a necessity for understanding materials changes which occur during aging, and for dealing with issues of materials lifetime prediction, aging monitoring, materials selection, and material stabilization. Time-dependent radiation-degradation effects can be understood mechanistically in terms of: (1) features of the free radical chain-reaction chemistry underlying the oxidation, and (2) oxygen diffusion effects. A profiling technique has been developed to study heterogeneous degradation resulting from oxygen diffusion, and kinetic schemes have been developed to allow long-term aging predictions from short-term high-dose-rate experiments. These methodologies have been successfully applied for predicting degradation rates of a number of different materials under ambient nuclear environments. Low molecular weight additives which act either as free-radical scavengers or else as energy-scavengers are effective as stabilizers in radiation-oxidation environments. Non-radical oxidation mechanisms, involving species such as ozone, can also be important in the radiation-oxidation of polymers. 14 refs., 13 figs.

More Details

Thermal strains in a bimaterial joint: Experimental and numerical analysis

Wood, J.D.; Tsai, M.Y.; Post, D.; Morton, J.; Parks, V.J.; Gerstle Jr., F.P.

A comprehensive stress analysis was performed for a bimaterial plate subjected to a uniform change of temperature. The steel and brass portions of the specimen were bonded along a common edge. Whole-field measurements were made by high-sensitivity moire interferometry. A companion finite element numerical analysis of a similar body was conducted to help interpret the experimental results. The experiments documented a strong free-edge effect along the entire perimeter of the joint, an effect akin to a line singularity along the perimeter. High stresses in the edge-effected zone were determined from measurements, and enormous stress gradients were deduced by analysis. The largest stresses were found at the corner, where two edge-effected zones intersected. 5 refs., 8 figs.

More Details

Quantitative thin film x-ray microanalysis of Nb modified Ti/sub 3/Al

Romig Jr., Alton D.

Advanced titanium-aluminum intermetallic alloys (often simply called titanium aluminides) have certain properties which make them potentially attractive as advanced aerospace alloys. In order to utilize these alloys in engineering applications, it is necessary to process the alloys in a variety of ways including casting, hot forming and welding. All of these processes modify the microstructure of the alloy, which in turn directly influences the properties. The key to optimizing the alloy's properties is to control the microstructure by careful control of the processing parameters. Control for the microstructure requires a thorough understanding of the evolution of the microstructure, including elemental partitioning between the various phases which form in the alloy. Analytical electron microscopy (AEM) is an ideal way to characterize the microstructures on a fine spatial scale. Such high spatial resolution microanalysis is required to understand the microstructural evolution in these alloys. In this case, the alloy is a Nb modified Ti/sub 3/Al, and the partitioning behavior of interest is between a variety of ternary phases which are produced as a function of alloy cooling rate from a single homogeneous high temperature ..beta.. phase. The Nb is added to the alloy to enhance its performance, primarily through an improvement in ductility. In this work, the details of the procedure for quantitative analysis of these alloys are presented.

More Details

PBFA II applied B-field ion diode proton beam characteristics

Johnson, David J.

An applied B-field ion diode on PBFA II has produced a 17 TW proton beam for investigation of beam generation and transport physics pertinent to inertial confinement fusion experiments. Power was fed to the diode via two conical self-magnetically-insulated transmission lines that incorporated plasma opening switches. The diode utilized a pair of B-field coils in disc shaped cathodes to produce a 3 T axial B-field that insulated the 16 mm anode-cathode gap from electron loss. The 15-cm-radius anode was configured with a 5.5-cm-tall curved ion emitting region. A 2.6 MA ion beam originated from this region, was accelerated to 6 MV in the anode-cathode gap, and then transported ballistically toward the axis in a current neutralizing gas cell. The best transport (75%) occurred with narrow 5.5-cm-tall anode sources in which a 180 kJ proton beam was observed within 1.2 cm of the diode centerline. The FWHM of the beam focused at the centerline of the diode was 5 to 7 mm. This beam gave a peak proton power density of approximately 5 TW/cm/sup 2/. 12 refs., 8 figs.

More Details

Finite control volume modeling of laminar and turbulent flow of air in an enclosure

Hogan, R.E.; Kettleborough, C.F.

The finite control volume method (FCVM) was successfully used to calculate both laminar and turbulent buoyancy driven flow of air in a square enclosure for Ra = 10/sup 3/ to 10/sup 8/. For laminar flow, comparisons of the computed solution with both experimental data and other numerical solutions are in excellent agreement. Comparisons of selected velocities and average Nusselt numbers with a ''benchmark'' solution presented by deVahl Davis are consistently within 4%. For turbulent flow, the agreement with another numerical solution is generally good, considering the large difference in the number of nodes employed. The agreement with extrapolated experimental correlations for the average Nusselt number was acceptable. 20 refs., 4 figs., 2 tabs.

More Details

A recuperative gas fired forge furnace

Gunter, R.

To overcome the heat deficit and oxidizing atmosphere problems and to reduce fuel consumption, a small gas forge furnace has been developed which incorporates recuperative heating; as the combustion air is drawn into the furnace it is preheated by passing it through a simple heat exchanger which is heated by the exhaust gases from the furnace. This recuperative heating principle is the same used by blast and open hearth furnaces but they typically employ complex heat exchangers, and extensive blowers and valving to direct the flow of the intake and exhaust gases. In the furnace described in this article a chimney is provided at the rear of the furnace and the air intake ducts pass through the chimney before reaching the venturi where the fuel gas is injected. Thermocouples were place in the air intake ducts and the temperature of the recuperated air was 1000 F. Based on data in the Mechanical Engineers Handbook (Industrial Heating Furnaces) fuel savings are directly related to the temperature of the preheated air. The theoretical saving in fuel with 800 F. combustion air is about 19%. The furnace is very quiet, since no blowers are used and the venturi is located in the center of a long tube. To control the furnace atmosphere and to help reduce heat loss, a close fitting swing away door has been incorporated, and the entire furnace is insulated with lightweight high performance ceramic insulation. The resulting furnace easily achieves forge welding temperatures, has an oxygen depleted atmosphere and has proven to be very effective and capable for small machine and hand forging operations. 6 figs.

More Details

Standard terminal panel and UPS (uninterruptible power supply) design for exterior intrusion detectors and data collection applications

Wolfenbarger, F.M.

Need for standardization has been discussed for years by many government agencies. In the past, every perimeter site upgrade resulted in the design, specification, procurement, and fabrication of a unique power and signal junction box. To save design and specification cost, a standard terminal panel and uninterruptible power supply (UPS) design for an exterior intrusion sensor detection system was developed for a security system within the Sandia National Laboratories complex at Albuquerque, New Mexico. In facilitating this requirement a design was sought that could easily be modified for other government or commercial applications and one that could easily be fabricated in the shop. Also of primary importance was the need for lightning protection for both the communications and voltage sources. A 12V dc UPS with a current capacity of up to 4 amperes complements the standard terminal design and allows uninterrupted sensor operation for a number of hours should the primary ac source be interrupted. This report encompasses the features of the designs. The designs are also being used and continuously evaluated in Sandia's Area III exterior test field. 7 figs.

More Details

Studies of oxidative degradation of polymers induced by ionizing radiation

Clough, Roger L.

Radiation effects on polymers in the presence of air are characterized by complicated phenomena such as dose-rate effects and post-irradiation degradation. These time-dependent effects can be understood in these terms: (1) features of the free radical chain-reaction chemistry underlying the oxidation, and (2) oxygen diffusion effects. A profiling technique has been developed to study heterogeneous degradation resulting from oxygen diffusion, and kinetic schemes have been developed to allow long-term aging predictions from short-term high dose-rate experiments. Low molecular weight additives which act either as free-radical scavengers or else as energy-scavengers are effective as stabilizers in radiation-oxidation environments. Non-radical oxidation mechanisms, involving species such as ozone, can also be important in the radiation-oxidation of polymers. 18 refs., 15 figs.

More Details

Novel applications of the field ion microscope and atom-probe

Kellogg, G.L.

Introduced in 1951 and 1966 respectively, the field ion microscope and atom-probe mass spectrometer can hardly be considered new or emerging microprobes. Over the years, the ability to use these instruments to examine the structure and composition of various materials at the atomic level has been well established. However,recent advances in more conventional microanalytical techniques, particularly progress toward a higher degree of spatial resolution, has created renewed interest in all techniques capable of analysis on a very fine scale. Also, there has been an increased emphasis over the past several years in the application of the field ion microscope and atom-probe to problems of greater general interest in surface and materials science. It is therefore not totally inappropriate to discuss the field ion microscope and atom-probe within the context of ''emerging'' microprobes. The intent of this paper is to familiarize the reader with the techniques of field ion microscopy and atom-probe mass spectroscopy and describe several recent applications which demonstrate some of their unique attributes. 45 refs., 8 figs.

More Details

Droplet sizing calibration of the Phase Doppler Particle Analyzer

O; Hern, D.J.'.

The Phase Doppler Particle Analyzer (PDPA) is an LDV-based instrument for simultaneous measurement of single particle size and velocity. A PDPA calibration was performed using well-characterized liquid droplets in the 4 to 80 ..mu..m diameter range. Two test liquids were used: oleic acid and kerosene. A standard PDPA instrument and a fiber-optic probe PDPA system were tested. The standard instrument measurements agreed with expected droplet diameters to within the droplet generation accuracy for droplets above 15 ..mu..m diameter, and had a measurement accuracy of about 2 ..mu..m for smaller droplets. The fiber-optic probe system exhibited similar behavior, although the 2 ..mu..m sizing uncertainty extended to droplets as large as 25 ..mu..m. The measurement uncertainties in the small diameter ranges are in qualitative agreement with the light-scattering computations of Al-Chalabi et al. (1988) and Saffman et al. (1984). 7 refs., 4 figs.

More Details

Micromechanical characterization of near-surface layers

Bourcier, R.J.

This paper reviews several techniques available to the experimenter to characterize the mechanical properties of near surface layers of engineering materials. The test methods examined are: micro-tensile testing, bulge testing, ultra-low load indentation testing, and microfabricated test structures. The applicability of these techniques as well as their advantages and difficulties are examined. Special emphasis is given to recent developments in ultra-low load indentation testing and microfabricated test structures. 61 refs., 2 figs.

More Details
Results 100726–100750 of 100,993
Results 100726–100750 of 100,993
Top