Publications

Results 100351–100375 of 100,993

Search results

Jump to search filters

Performance and operational characteristics of a Fiber Distributed Data Interface (FDDI) ring

Testi, N.

Sandia National Laboratories is in the process of upgrading the Central Computing Network, which is a large heterogeneous network providing scientific computing, file storage, output services, and remote access to network resources. The migration from the present HYPERchannel-50 technology to HYPERchannel-100 is currently in progress and plans to migrate to the Fiber Distributed Data Interface (FDDI) token ring architecture are being considered. A migration from a variety of proprietary protocols to a primarily TCP/IP environment is also in progress. In order to test the feasibility of the Network Systems Corporation FDDI technology platform, two test rings have been constructed. Ring A' consists of nine dual attached Data Exchange Units (DXUs) and ring B' consists of two dual attached DXUs. The rings are linked together using N715 DXUs. Other DXU models (with associated host computers where applicable) include N130s, an N220, N400s, and FE640 IP routers. Test data on fault isolation and recovery mechanisms, performance, IP routing (within and between rings), and monitor capabilities will be presented. Interoperability' data based on tests between DXUs and Sun FDDI workstations will also be presented. 14 figs.

More Details

Characterization of electron flow in positive-polarity linear-induction accelerators

Rosenthal, Stephen E.

Experiments at Sandia National Laboratories have studied the operation of the linear-induction accelerators, HELIA and Hermes 3, in positive polarity. These experiments have provided a unique opportunity to explore the consequences of multiple-cathode electron emission in magnetically insulated transmission lines. An examination of the total energy-canonical momentum distribution of the electrons explains the features of the magnetically insulated flow exhibited by these systems. Simple analysis based on the basic concept of pressure balance, in conjunction with particle-in-cell numerical simulations, shows how the line voltage is related to the anode and cathode currents. Two flow designations are introduced that can apply to multiple-cathode magnetically insulated transmission lines: full-gap flow (FGF), and locally emitted flow (LEF). 16 refs., 15 figs.

More Details

Design and implementation of a Fiber Distributed Data Interface (FDDI) cable plant and network

Gossage, Steven A.

An extensive optical fiber (o.f.) cable plant has been constructed in the Central Computing Facility (CCF) of Sandia National Labs to support the NSC DX platform with the Fiber Distributed Data Interface (FDDI) network. The cable plant was designed to optimize flexibility, maintainability, expandability, performance, and capacity. More than 2km of fiber cable and over 3400 connectors were installed. Each component of the cable system was carefully evaluated in order to meet the design requirements and conform to standards. A detailed statement of work (SOW) was generated to assure proper implementation of the design by a qualified contractor. Following the installation of the o.f. cable plant, a heterogenous, production network was built to utilize the benefits of the new media and interfaces.

More Details

Geometry and B(1s) core excitons of ortho-carborane

Green, P.F.

The optimized C{sub 2v} geometry of ortho-carborane, 1,2-C{sub 2}B{sub 10}H{sub 12}, is determined from Hartree-Fock calculations. For this geometry, a carbon atom is substituted for a boron atom at one of the 4 inequivalent boron sites and the ground-state unrestricted Hartree-Fock eigenvalues and molecular orbitals are found. One thus obtains the valence structure of the B(1s) core-excited molecule according to the Z + 1 approximation. The eigenvalue of the highest occupied molecular orbital is then subtracted from the experimental B(1s) ionization energy of the same site in ortho-carborane. This determines the excitation energy of the most tightly bound exciton for that site. Three of the sites yield nearly identical excitation energies of 191.9 eV; the fourth site yields an excitation energy of 190.9 eV. 8 refs., 1 fig., 2 tabs.

More Details

Development of the BOLVAPS-LIBORS (Boil-Off Lithium VAPor Source-Laser Ionization Based On Resonance Saturation) lithium ion source for the PBFA-2 (Particle Beam Fusion Accelerator-2) accelerator

Dreike, Philip L.

A large area surface source of Lithium plasma for use as an ion source in the PBFA-2 ion beam diode is described. BOLVAPS produces a 1--2 mm thick layer of Li vapor with a density approaching 1 {times} 10{sup 17} cm{sup {minus}3} by rapid ohmic heating of a thin film laminate, one layer of which contains Li. The principal design issues of the vapor source being built for use on the PBFA-2 accelerator are described. LIBORS uses 670.8 nm laser light to efficiently ionize the Li vapor. The results of small-scale Physics tests and full-scale component development are summarized. 13 refs., 6 figs.

More Details

PBFA 2 applied B ion diode beam characteristics at high voltages

Johnson, David J.

An applied B-field ion diode has been operated at 21 TW on PBFA 2 to study beam generation and transport physics. The radial focusing 15-cm-radius diode utilized a pair of magnet coils in disc cathode structures to produce an axial B-field to minimize electron loss in the 16 mm anode-cathode gaps. The diode was different than used in the past with the cathodes 20% closer together and the B-field increased to 3.3 T at the midplane. The 2.5 MA beam originated from a 5-cm-tall ion emitting region and was transported toward the axis in a 12.5-cm-radius gas cell with 2-{mu}m-thick mylar window and a 5-Torr-argon gas fill. A surface flash-over plasma created by electron loss on wax-filled grooves in the anode produced a beam with comparable currents of proton and carbon ions. The experimental results include the spatial uniformity and time dependence of proton and carbon beam emission from the anode and the divergence and focusability of both beams. 10 refs., 13 figs.

More Details

Anomalous dispersion as a phase-matching technique for second harmonic generation

Cahill, P.A.; Singer, K.D.

Anomalous dispersion (the decrease in refractive index which is associated with absorption) can be used to produce a phase-matched condition for second harmonic generation. This process also gives rise to large increases in the useful second order hyperpolarizability. A new, soluble NLO dye with exceptionally low absorption near 400 nm has been used for anomalous dispersion phase-matching studies in thin films.

More Details

Weldability of nickel and iron aluminides

Maguire, Michael C.

The weldability of alloys based on Ni{sub 3}Al and Fe{sub 3}Al is discussed. Both of these ordered alloy systems may experience problems associated with welding. In the case of Ni{sub 3}Al alloys, limited hot ductility contributes to heat-affected zone cracking. Fe{sub 3}Al alloys experience similar difficulties in zone cracking. Fe{sub 3}Al alloys experience similar difficulties in welding due to excessive grain embrittlement due to the presence of water vapor. Advances in both alloying and substructural refinement to improve the weldability are reviewed. 18 refs., 10 figs.

More Details

Processing of nanocrystalline ceramics

Mayo, M.J.

Methods of preparing non-agglomerated powders for three systems -- yttria, titania, and yttria-stabilized zirconia -- are reviewed. The non-agglomerated nature of these powders should make it possible to sinter them into dense ceramic bodies with nanocrystalline grain sizes. Experiments with yttria-stabilized zirconia have shown that this is indeed the case, with mean linear intercept grain sizes of 60 nm resulting from original powder particle diameters of 13 nm. This ultrafine-grained zirconia is shown, in turn, to have superplastic forming rates 34 times faster than a 0.3 {mu}m-grained commercial zirconia of the same composition. 7 refs., 9 figs.

More Details

A pipelined 650 MHz GaAs 8K ROM with translation logic

Remund, B.

The first commercially available GaAs 8K ROM has been designed and manufactured using GigaBit Logic's 3-level metal E/D process. The worst case clock frequency of 650 MHz has been obtained with a power dissipation of 3.5 W. The ROM is organized as 1K X 8 bits, and on-chip translation logic enables the ROM to have an effective 4K X 8 resolution when used a a sine look-up table. The ECL compatible ROM is packaged in GigaBit Logic's standard 40 pin package.

More Details

A welding metallurgy study of Hastelloy Alloys B-2 and W

Lienert, T.J.; Robino, C.V.; Hills, C.R.; Cieslak, M.J.

The weldability, solidification behavior, and solidification microstructures of Hastelloy{asterisk} Alloy B-2 and Hastelloy{asterisk} Alloy W have been investigated. Susceptibility to fusion zone hot-cracking was determined by autogenous Varestraint testing. High temperature phase transformations, including solidification events, were identified by differential thermal analysis (DTA). After testing, the microstructures of various specimens were examined by optical metallography, scanning electron microscopy (SEM), electron microprobe analysis, and analytical electron microscopy (AEM). Results of this study showed that Hastelloy B-2 has exceptional resistance to hot cracking, comparable to that of Hastelloy C-4 and 304 stainless steel, while Hastelloy W proved to be somewhat more susceptible to hot cracking, exhibiting behavior similar to Alloy 625. The solidification process in both Hastelloy B-2 and Hastelloy W was found to be dominated by the segregation of Mo which gives rise to the formation of terminal eutectic-like constituents. This pattern of segregation is consistent with that of previous work on other Ni--Mo--Cr alloys. The microstructural constituents associated with hot-cracking in each alloy have been identified. 13 refs., 8 figs.

More Details

A weldability study of Haynes Alloy No 242

Maguire, Michael C.

The weldability of Haynes {reg sign} Alloy No. 242 {trademark}, a new alloy derived from the Ni-Mo-Cr system, was investigated. Susceptibility to fusion zone hot cracking was determined by Varestraint testing, and hot ductility was characterized by Gleeble testing. Solidification phase transformation data was recorded with differential thermal analysis (DTA). Weld microstructures were characterized with scanning electron microscopy (SEM), analytical electron microscopy (AEM), and electron probe microanalysis (EPMA). The results of this study indicate that this alloy has better hot cracking resistance than high strength nickel base superalloy 718; however, it has lower resistance than other alloys derived from the Ni-Cr-Mo ternary such as the Hastelloy alloys B2, C-4, C-22, C-276, and W. Segregation patterns in weld microstructures agree well with established information concerning this family of alloys. Prediction of solidification products with the Ni-Mo-Cr phase diagram based on a chemical equivalence was unsuccessful due to the higher carbon content of this alloy which favors the formation of M{sub 6}C. Solidification in Alloy 242 terminates with the formation of two eutectic-like constituents: (1) a M{sub 6}C/austenite eutectic, and (2) a second eutectic with austenite and an undetermined phase. This latter phase has a composition similar to the M{sub 6}C phase, but with a different crystal structure (cubic, ao = 6.6 {Angstrom}). 11 refs., 10 figs., 4 tabs.

More Details

RLA (Recirculating Linear Accelerator) accelerating cavity improvements

Smith, David L.

In the Recirculating Linear Accelerator, we will inject a 10-kA to 20-kA electron beam, and then focus and guide it with an IFR plasma channel, which is created with a low energy electron beam. The REB will be transported through a closed racetrack or a spiral beam line to be re-accelerated by the ringing waveform of dielectric cavities. By adding more accelerating cavities along the beam line, high energies can be achieved. Experiments are in progress to study IFR beam transport issues. A new injector is needed for beam re- acceleration experiments. We are presently installing this new REB injector which will-provide a higher amplitude ({approximately}4 MV), longer duration ({approximately}40-ns FWHM), more rectangularly shaped({approximately}25-ns full width at 90% peak) waveform and a colder beam than were achievable with the previous 1.5-MV injector. The resultant constant beam energy can be more efficiently matched the guiding IFR plasma channel in the beam line and to the turning section magnetic fields. We are now developing new cavities that produce accelerating voltage pulses with improved waveform flatness, width, and amplitudes that do not suffer unacceptable degradation over the first four ringing periods. This effort requires network solver and electrostatic field stress analysis computer codes, and a scaled test model to compare actual waveforms to those predicted by the simulations. 10 refs., 9 figs.

More Details

Hole-trapping/hydrogen transport (HT) sup 2 model for interface-trap buildup in MOS devices

Shaneyfelt, Marty R.

The electric field dependence of radiation-induced interface-trap formation has been reported to be different for metal-gate capacitors and polysilicon-gate capacitors and transistors. For metal-gate capacitors, interface-trap formation steadily increases with increasing positive field. On the other hand, for polysilicon-gate capacitors and transistors, interface-trap buildup peaks near fields of 1 MV/cm to 2 MV/cm and decreases with an approximate E{sup {minus}1/2} dependence at higher fields. The previously reported field dependence for interface-trap generation for Al-gate capacitors is consistent at all fields with McLean's physical explanation of the two-stage process, which depends on hydrogen ion (H {sup +}) release in the bulk of the oxide as radiation-induced holes transport to either interface via polaron hopping. Above 1 MV/cm, the field dependence of interface-trap buildup for polysilicon-gate devices is inconsistent with this model. Instead, it is similar to the field dependence for hole-trapping in SiO{sub 2}, suggesting that hole trapping may play a key role in interface-trap generation in Si-gate devices. However, recent studies of the time-dependence of interface-trap buildup have known that hole trapping cannot be the rate-limiting step in interface-trap buildup in polysilicon gate devices. Consistent with McLean's physical explanation of the two-stage process, the rate-limiting step in interface-trap formation appears to be H{sup +} transport to the Si/SiO{sub 2} interface. We will show that the electric field dependence of radiation-induced oxide- and interface-trap charge buildup for both polysilicon and metal-gate transistors follows an approximate E{sup {minus}1/2} field dependence over a wide range of electric fields when electron-hole recombination effects are included. Based on these results a hole trapping/hydrogen transport (HT){sup 2} model for interface-trap buildup is proposed.

More Details

The EISI (Elemental and Interplanar Spacing Index) index---A search/match tool for electron diffraction phase analysis

Carr, M.J.; Himes, V.L.; Mighell, A.D.; Anderson, R.

The identification of unknown phases in the JCPDS-ICDD Powder Diffraction File (PDF) using diffraction data is a three-step process. First, the Search step rapidly screens the entire PDF to produce a list of candidate solutions that correspond to the unknown phase's d-spacings and chemistry. Second, the Match step examines closely every aspect of each phase in the candidate list, vs the unknown, to make the final identification. Third, the Decision step: Does the solution found make crystal-chemical-thermodynamic sense A hindrance to the identification process for electron diffraction applications is that the PDF consists of x-ray diffraction powder data. The present Elemental and Interplanar Spacing Index (EISI) book is based on the successful 1979 Max-d/Alphabetical Index rules, but with significantly enhanced capability, as it utilizes the combined NIST/Sandia/ICDD Database. The EISI is designed to be used independently as a searching tool. As a searching tool it provides a list of candidate phases for consideration as solutions to the unknown phase diffraction data. The EISI index was designed to assist the actual steps taken by an Analytical Electron Microscope (AEM) diffractionist when confronted with an unknown diffraction dataset: the assemblage and d-spacing searching of a microfile of data containing chemically correct phases. The construction of the NIST/Sandia/ICDD Database overcomes many of the disadvantages associated with searching x-ray derived databases for solutions to electron diffraction problems. 8 refs., 1 fig.

More Details

Information engineering: Sandia's Computer Integrated Manufacturing (CIM) database

Sharp, J.K.

The activities involved in establishing a Computer Integrated Manufacturing (CIM) database at Sandia National Laboratories (SNL) are part of a common effort to implement a proactive data administration function across administrative and technical databases. Data administration activities include the establishment of corporate data dictionary, a corporate information model, and a library of important objects and their relationships with other objects. Processes requiring information will be identified and supported with future information systems that share administrative and technical data. The process to create databases is being established based upon accepted engineering design practices. This paper discusses the CIM database, presents the selected information modeling technique and describes the information engineering process. 9 refs.

More Details

Soft x-ray resist characterization: Studies with a laser plasma x-ray source

Zeigler, J.M.

Little work has been performed to characterize the exposure sensitivity, contrast, and tone of candidate resists for photon energies between 100--300 eV, the range in which projection soft x-ray lithography will be developed. We report here the characterization of near-edge x-ray absorption fine structure (NEXAFS) spectra, exposure sensitivity, contrast, and post-exposure processing of selected polysilane resists at photon energies close to the Si L{sub 2,3} absorption edge (100 eV). We find absorption resonance features in the NEXAFS spectra which we assign to excitation into Si--Si and Si--C {sigma}* orbitals. Using monochromatized XUV exposures on the Si--Si {sigma}* resonance at 105 eV, followed by solvent dissolution development, we have measured the exposure sensitivity curves of these resists. We find sensitivities in the range of 600--3000 mJ/cm{sup 2} and contrasts in the range from 0.5--1.4, depending on the polysilane side chain. We have also performed exposure sensitivity measurements at 92 eV, below the edge. Sensitivity decreases slightly compared to 105 eV exposures and the saturation depth and contrast both increase, as expected. We find also that exposing resist films to oxygen after XUV exposure, but before development increases the sensitivity markedly. 7 figs.

More Details

Simplified Velocity Interferometer System for Any Reflector (VISAR) system

Stanton, P.L.

A simplified, rugged VISAR (Velocity Interferometer System for Any Reflector) system has been developed using a non-removable delay element and an essentially non-adjustable interferometer cavity. In this system, the critical interference adjustments are performed during fabrication of the cavity, freeing the user from this task. Prototype systems are easy to use and give extremely high quality results. 6 refs., 7 figs.

More Details

Development and field testing of the high-temperature borehole televiewer

Duda, L.E.; Uhl, J.E.; Wemple, R.P.

The High-Temperature Borehole Televiewer is a downhole instrument which provides acoustic pictures of the borehole walls that are suitable for casing inspection and fracture detection in geothermal wells. The Geothermal Drilling Organization has funded the development of a commercial tool survivable to temperatures up to 275{degree}C and pressures of 5000 psi. A real-time display on an IBM-compatible PC was included as part of the developmental effort. This paper describes the three principal components are: the mechanical section, the electronics, and the computer software and hardware. Each of these three components are described with special attention to important design changes most pertinent to a high temperature environment. The results of two field tests of the televiewer system are also described. 7 refs., 4 figs.

More Details

Experimental and computational investigation of the fundamental mechanisms of cratering

Thorne, Billy J.

Early attempts at estimation of stress wave damage in blasting by use of finite element analysis met with limited success due to numerical instabilities that prevented calculations from being carried to late times after significant fragmentation had occurred. A new damage model based on microcrack growth in tension allows finite element calculations which remain stable at late times. Estimation of crater profiles for blasting experiments in granite, using laboratory properties for all parameters, demonstrate a high level of success for this damage model. However, estimated crater profiles show systematic differences from excavated crater profiles which motivate further developments of this model. 19 refs., 16 figs.

More Details

Tensile behavior of borated stainless steels

Sorenson, Ken B.

Borated stainless steel tensile testing is being conducted at Sandia National Laboratories (SNL). The goal of the test program is to provide data to support a code case inquiry to the ASME Boiler and Pressure Vessel Code, Section 3. The adoption by ASME facilitates a materials qualification for structural use in transport cask applications. The borated stainless steel being tested conforms to ASTM specification A-887, which specifies 16 grades of material as a function of boron content (0.20% to 2.25%) and fabrication technique. For transport cask basket applications, the potential advantage to using borated stainless steel arises from the fact that the structural and criticality control functions can be combined into one material. The test program at SNL involves procuring material, machining test specimens, and conducting the tensile tests. From test measurements obtained so far, general trends indicate that tensile properties (yield strength and ultimate strength) increase with boron content and are in all cases superior to the minimum required properties established in SA-240, Type 304, a typical grade of austenitic stainless steel. Therefore, in a designed basket, web thickness using borated stainless steel would be comparable to or thinner than an equivalent basket manufactured from a typical stainless steel without boron additions. 3 figs., 5 tabs.

More Details

Thermal expansion of beta-eucryptite filled bismaleimide and glass/bismaleimide composites

Warren, William L.

The use of a negative coefficient of thermal expansion (CTE) mineral filler ({beta}-eucryptite) is examined as a means of reducing CTE of a bismaleimide polymer (Kerimid 601). Results show that {beta}-eucryptite is effective in lowering CTE of the polymer and of glass fabric composites with a filled matrix phase. A theoretical model is presented that effectively predicts CTE of the filled BMI but underestimates the observed results by approximately 15%. The lower predicted CTE is believed to be due to poor interfacial adhesion at the {beta}-eucryptite/bismaleimide interface. Poor interfacial adhesion is supported by ultimate tensile strength results. 27 refs., 7 figs., 3 tabs.

More Details

Quantitative confirmation of diffusion-limited oxidation theories

Gillen, Kenneth T.

Diffusion-limited (heterogeneous) oxidation effects are often important for studies of polymer degradation. Such effects are common in polymers subjected to ionizing radiation at relatively high dose rate. To better understand the underlying oxidation processes and to aid in the planning of accelerated aging studies, it would be desirable to be able to monitor and quantitatively understand these effects. In this paper, we briefly review a theoretical diffusion approach which derives model profiles for oxygen surrounded sheets of material by combining oxygen permeation rates with kinetically based oxygen consumption expressions. The theory leads to a simple governing expression involving the oxygen consumption and permeation rates together with two model parameters {alpha} and {beta}. To test the theory, gamma-initiated oxidation of a sheet of commercially formulated EPDM rubber was performed under conditions which led to diffusion-limited oxidation. Profile shapes from the theoretical treatments are shown to accurately fit experimentally derived oxidation profiles. In addition, direct measurements on the same EPDM material of the oxygen consumption and permeation rates, together with values of {alpha} and {beta} derived from the fitting procedure, allow us to quantitatively confirm for the first time the governing theoretical relationship. 17 refs., 3 figs.

More Details
Results 100351–100375 of 100,993
Results 100351–100375 of 100,993
Top