Publications

Results 100151–100175 of 100,993

Search results

Jump to search filters

Thermal battery statistics and plotting programs

Scharrer, G.L.

Thermal battery functional test data are stored in an HP3000 minicomputer operated by the Power Sources Department. A program was written to read data from a battery data base, compute simple statistics (mean, minimum, maximum, standard deviation, and K-factor), print out the results, and store the data in a file for subsequent plotting. A separate program was written to plot the data. The programs were written in the Pascal programming language. 1 tab.

More Details

NWC (Nuclear Weapon Complex) CIM file header specification: Version 2. 0

Denman, Stephen D.

This document describes the Nuclear Weapons Complex (NWC) detached'' CIM file header. The file header concept is defined and its form and content are specified. Guidelines for the use of file headers by the CIM community in the NWC are also included. This document is the result of the combined efforts of the Lead Laboratory and the NWC File Header Subgroup. It has evolved through a process of cooperation and compromise and represents a consensus view of the NWC.

More Details

Sandia National Laboratories data engineering for DOE production agencies

Hernandez Jr., L.; Ellison Jr., R.F.; Zubersky, J.L.; Maccosbe, G.L.; Davis, L.T.

At Sandia National Laboratories data engineering is the application of both the art and science aspects of engineering principles to the acquisition and storage of product-related test and traceability data and to the transformation of this data into useful information through data retrieval and analysis processes. This report describes the application of data engineering to the data systems that have been developed in support of production agency built or procured product. The production agencies that are addresses in this report include Mason Hanger, Amarillo, TX; GEND, Largo, FL, Allied Signal, KCD, Kansas City, MO; and Mount, Miamisburg, OH. Also discussed is the Weapon Evaluation Test Laboratory (7264)/Amarillo. The scope of the data engineering program for each production agency (or test facility) is presented along with the interfaces and constraints. The present contractors' data system is described and system limitations and future plans are discussed. 7 refs., 38 figs.

More Details

BUCKL: X-ray energy deposition code

Thompson, S.L.; Cole Jr., R.K.

BUCKL is an inexpensive x-ray deposition computer code which considers one-dimensional transport and accounts for two-dimensional effects in a buckling approximation. This manual contains input instructions and sample input.

More Details

Geomechanical analyses in support of the Waste Isolation Pilot Plant (WIPP)

Ehgartner, Brian L.

A variety of geomechanical analyses are presented that support the WIPP project. The scale of the analyses ranged through laboratory experiments, small-scale in-situ tests, large-scale in-situ tests, underground rooms, shafts and shaft keys, and multi-room panels. The structural behavior of underground rooms, shafts, and experiments was investigated using the finite element method. Both two and three dimensional analyses simulated the time-dependent behavior of the salt host rock. Two different constitutive models were used to represent the creeping motion of the salt. The investigations aided in experimental planning, code validation, and assessing excavation responses for safety and performance assessment. This report compiles ten different structural analyses which assess the performance of excavations and experiments located at the Waste Isolation Pilot Plant (WIPP) in Carlsbad, NM. Chapter 2 discusses the constitutive models used to represent the salt behavior. Each of Chapters 3 through 12 presents an analysis. Chapter 13 concludes the report. 36 refs., 48 figs., 17 tabs.

More Details

The automation of the Facility for Atmospheric Corrosion Testing (FACT)

Poulter, Gregory A.

An interactive computerized and automated system to provide environmental control for atmospheric corrosion experiments has been added to the FACT, as well as computerized data acquisition for sample weighing. The FACT allows control of corrosive gas concentrations to simulate industrial atmospheric conditions and requires constant manual adjustment to provide a stable test environment. Because constant manual adjustment is impractical, we have automated this facility to achieve the desired stability. This system incorporates an IBM PC AT using Keithley's Series 500 hardware and Quick500 software development environment to calibrate gas analyzers, and to monitor exposure time, test chamber temperature, and gas concentrations. A second PC has been connected to a Mettler M3 microbalance through an IEEE-488 interface communicating under Lotus Measure. Weighings with a sensitivity of 1 {times} 10{sup {minus}6} gram are transferred directly into a Lotus 123 spreadsheet where the data can then be easily manipulated and plotted. Under computer control, the FACT can now run unattended for more than a week and maintain much better control over gas concentrations (200 {plus minus} 5 ppb and 10 {plus minus} 0.5 ppb for NO{sub 2} and H{sub 2}O and H{sub 2}S, respectively) than was possible with manual control (100 {plus minus} 25 ppb for either gas), after initial stabilization. 9 figs.

More Details

Design of linear shaped charges using the LESCA (Linear Explosive Shaped Charge Analysis) code

Vigil, Manuel G.

The Linear Explosive Shaped Charge Analysis (LESCA) code is used to analytically model and optimize the design of a linear shaped charge (LSC). A variety of LSCs are initially modeled with the LESCA code, and the predicted jet penetration versus standoff data are compared to experimental data. The LSCs varied in explosive loading size form 600 to 10,500 grains per foot. The LSC liner material for this study was cooper. The variables optimized in this study included the LSC apex angle, liner thickness, explosive width, and explosive width, and explosive height. 8 ref., 24 figs.

More Details

Operational and performance characteristics of the PCP PHEMTO-CHEM 100 ion mobility spectrometer

Ingersoll, David

The PCP PHEMTO-CHEM 100 ion mobility spectrometer (IMS) exhibits a number of characteristics that affect its performance for the quanititative and qualitative analysis of explosives in solution and in the gas phase. These characteristics, as well as modifications to the system that will either eliminate, or reduce, the extent of some problems associated with these characteristics, are described. Also described are other aspects of the operation and performance of this system. 9 refs., 10 figs., 1 tab.

More Details

Data logger for the 34-meter vertical axis wind turbine test bed

Ralph, Mark E.

This report discusses the purpose and requirements that were established for the data logger at the 34-m diameter, research- oriented vertical axis wind turbine, the Test Bed, which Sandia National Laboratories built at Bushland, Texas. The data logger is a minicomputer-based system that collects data from 35 channels, displays the collected data, and records them on a hard disc. Both the hardware and software that make up the data logger are also described, and the operator's instructions and the operating system commands and procedure files are appended. The data logger is used to obtain long-term data to characterize the wind at the site of the turbine, record the performance data of the control system, obtain a continuous record of events at the test sire, consolidate displays for the test engineer, and provide a display of current information for visitors to the site. 7 refs., 3 figs., 4 tabs.

More Details

Graphical analysis of barrel-tamped explosively accelerated flyer plates

Vigil, Manuel G.

Analytical equations for barrel-tamped explosively accelerated flyer plates are used to generate graphical solutions to flyer problems. Given the problem geometrical dimensions, explosive weight, detonation velocity, explosive exponent, barrel-tamping weight, and flyer weight, the graphical representation of the calculated data allows for a fast approximation of the final or maximum flyer plate velocity. Graphically obtained flyer velocities are compared to experimentally published data. The graphical solution for flyer velocity is particularly useful when a computer is not available. The graphical representation of the various barrel-tamped flyer parameters results in a parametric study which illustrates the effect on final flyer velocity in varying parameters. The graphical analysis scheme can be used with any explosive, tamper and flyer materials. 15 refs., 12 figs., 4 tabs.

More Details

Calculations for RADLAC, IBEX, and the RLA in 1989

Poukey, J.W.

This report presents the results of numerical modeling of the electron beam generation, transport, and conditioning in the Sandia accelerators RADLAC, IBEX, and RLA for the year 1989. The codes used were the particle code MAGIC, the trajectory code TRAJ, and some preliminary work with the 3-D code Quicksilver. The results are mostly in the areas of injector design, beam propagation in IFR channels and B{sub {Theta}} cells, and emittance measurements. The energy range of these electron beams is from 1 MeV to 20 MeV. 16 refs., 42 figs.

More Details

Numerical modeling tools for transient electromagnetic problems

Riley, Douglas J.

Finite-difference time-domain (FDTD) codes can, in principle, be used to determine the electromagnetic response of complex scatterers. However, the extent to which structural details can be accommodated is limited by computer resources and one's ability to specify necessary parameters. By embedding into the FDTD code alternative numerical methods that solve the aspects of the problem which are not practical, or possible, for the FDTD code to handle, power and flexibility can be added. This report investigates three such hybrid schemes. Topics include: (1) embedding a transient multiconductor/circuit-analysis code so that coupling down to the component level can be directly computed; (2) the effectiveness of using a multiconductor transmission-line code to analyze shielded multiwire cables in FDTD calculations; and (3) the effectiveness of using two-- and three-- dimensional aperture transfer functions to model narrow apertures in FDTD formulations. These topics were selected because of their immediate need in system assessments. Experimental measurements and/or alternative solution methods are used to verify the hybrid approaches. 56 figs.

More Details

Aerosol Dynamics Laboratory

Rader, Daniel J.

In past five years, Department 1510 has developed a state-of-the-art Aerosol Dynamics Laboratory (ADL). This report documents the current instrumentation and capabilities that exist in this laboratory. The ADL was developed from a variety of sources, with a primary contribution from Department 1510's Independent Research and Development program in aerosol dynamics. Current capabilities of the ADL include: (1) generation of calibration-quality monodisperse particles with diameters between 0.005 to 100 {mu}m, (2) real-time measurement of particle size distributions for particle diameters between 0.01 and 100 {mu}m, (3) in situ, real-time measurement of particle size distributions for particle diameters between 0.3 and 100 {mu}m, and (4) real-time measurement of particle charge distributions for particle diameters between 0.01 and 1.0 {mu}m. 14 refs., 5 figs.

More Details

Preliminary evaluation of potential engineered modifications for the Waste Isolation Pilot Plant (WIPP)

Butcher, B.M.

Analyses related to the Supplemental Environmental Impact Statement and preliminary performance assessment studies have suggested that alteration of the method of waste emplacement in the Waste Isolation Pilot Plant (WIPP) may be necessary in order to satisfy waste storage regulations. Good engineering practice also dictates consideration of changes which are useful for better containment of waste. This report presents a preliminary evaluation of various engineered modifications that might be considered. The report is based on work that has been ongoing at Sandia National Laboratories since FY88, before formation of the present Engineering Alternative Task Force by the Department of Energy WIPP Project Office. The engineered modifications under consideration are described and characterized in the first part of the report according to: the objective that would be addressed by their application; their level of complexity; and some of the presently understood limitations and uncertainties of their use. Results of studies conducted to date to examine the feasibility of some of the modification concepts are presented, with emphasis on the effects of waste supercompaction.'' 21 refs., 14 figs., 5 tabs.

More Details

Strength analyses of Weeks Island bulkheads

Blanford, M.

When the Morton Salt Mine in Weeks Island, Louisiana was converted into a strategic Petroleum Reserve oil reservoir, massive concrete bulkheads were installed to seal the access shafts against oil or water leakage. Recent inspection of these bulkheads has raised questions about their ability to perform satisfactorily in the event of a catastrophic water leak into the mine. Calculations are reported here which examine the response of the five bulkheads to a worst-case scenario of flooding by brine from the surface into the oil reservoir below the bulkheads. These calculations show that, under conservative analysis assumptions, factors of safety under such a load for the bulkheads sealing the service shaft and the two raisebores are close to 1. The Markel incline and production shaft bulkheads exhibit safety factors in excess of 2 and 3, respectively. 10 refs., 24 figs., 3 tabs.

More Details

Seismic signal processing optimized for a specific source and receiver

Stearns, S.D.

A seismic signal processing procedure is designed so that its performance is optimized for a specific seismic array looking for explosions at a specific teleseismic location. In this report we first describe the processing procedure, which essentially estimates beamformer signal power as a function of time in a specified frequency band. Then we calibrate the procedure for the Norwegian Regional Seismic array (NRSA) in terms of equivalent body magnitude'' (emb) level versus signal power using US Department of Interior/Geological Survey (USGS) epicenter data from documented explosions at the USSR Semipalatinsk test area in Eastern Kazakh. Finally, we test the performance of the procedure on actual NRSA data and estimate that explosions above approximately mb 4.0 at Semipalatinsk correspond with an event rate in the emb signal on the order of one to ten events per hour. We conclude that, to detect and analyze events around the clock at levels below mb 4.0, an automatic event locator must be used to process the output of the procedure described here. 8 refs., 19 figs., 1 tab.

More Details

An interim report on testing the molten salt pump and valve loops

Rush, E.E.; Chavez, J.M.; Matthews, C.W.; Bator, P.

This interim report provides results of the molten salt pump and valve loop testing, lessons learned, and recommendations based on the test results to date. The molten salt pump and valve test loop is intended to demonstrate the effectiveness of full-scale hot and cold salt pumps and valves. The pump and valve testing consists of two pumped loops, one to simulate the hot side of the receiver (565{degree}C, referred to as the hot loop) and one for the cold side (285{degree}C, referred to as the cold loop). Each loop contains a pump and six representative valves scaled for a 60-MW{sub e} commercial solar power plant using molten salt heat transport fluid. The test loop is part of the Molten Salt Subsystem/Component Test Experiment (MSS/CTE), which is being conducted to reduce the technical risk of building and operating commercial solar central receiver plants. The project, managed by Sandia National Laboratories (SNL) with Babcock and Wilcox (B W) as the prime contractor, is cost shared by DOE and six contractors. The hot loop has operated over 2400 hours in the fully automatic sequence mode. The last 500 hours have been through continuous 24-hour, 7-day operation. The hot pump operation hours simulate over 2 years of pump cycles. The cold loop has operated 12 hours in the manual mode; this is because of problems caused in the manufacturing of the pump and motor. 9 refs., 6 figs., 1 tab.

More Details

Primary Standards Laboratory report: 2nd half 1989

Levy, Walbert G.T.

Sandia National Laboratories operates the Primary Standards Laboratory (PSL) for the Department of Energy, Albuquerque Operations Office (DOE/AL). This report summarizes metrology activities that received emphasis in the second half of 1989 and provides information pertinent to the operation of the DOE/AL system-wide Standards and Calibration Program. 7 refs.

More Details

Microsensor research

Hughes, Robert C.

The technology that led to very large-scale integrated circuits on silicon chips also provides a basis for new microsensors that are small, inexpensive, low power, rugged, and reliable. Two examples of microsensors Sandia is developing that take advantage of this technology are the microelectronic chemical-sensor array and the radiation-sensing field-effect transistor (RADFET). Increasingly, the technology of chemical sensing needs new microsensor concepts. Applications in this area include environmental monitoring, criminal investigations, and state-of-health monitoring, both for equipment and living things. Chemical microsensors can satisfy sensing needs in the industrial, consumer, aerospace, and defense sectors. The microelectronic chemical-sensor array (Figure 1) may address some of these applications. We have fabricated six separate chemical gas-sensing areas on the microelectronic chemical-sensor array. By using different catalytic metals on the gate areas of the diodes, we can selectively sense several gases. 14 refs., 12 figs.

More Details

Literature review of cask exterior surface contamination with application to a nuclear repository

Adams, K.G.

The characteristics of transportation cask surface contamination and the weeping'' phenomenon are reviewed. In addition, literature that pertains to the possible impact of surface contamination on repository operations is reviewed. This report consists of commentary on and rather extensive excerpts from the published literature on cask surface contamination that may have a bearing on repository risk assessment. In addition, estimates are made of the quantity of contamination that might be present on a cask. These estimates are used to calculate the direct exposure rates to personnel located at several distances from the cask. 15 refs., 15 tabs.

More Details

Enhanced gas recovery bibliography, Sandia National Laboratories, December 1975--December 1989

Northrop, D.A.

Sandia National Laboratories has conducted research and development in the area of enhanced or unconventional natural gas recovery since the mid-1970's. This report is a compilation, in chronological order, of the formal documentation that has resulted from that work. Since its inception, this R D has covered five general areas, which evolved in roughly the following order: instrumentation, mineback experimentation, propellant fracturing, multiwell experiment, and geoscience. The Department of Energy's U:nconvetnional Gas Program has been the predominant sponsor ofthe work represented in this bibliography. All entries of this bibliography are reports, papers, and abstracts which are available publicly -- either in published journals or as reports available through the National Technical Information Service, US Department of Commerce, 5285 Port Royal Road, Springfield, VA 22161. The Journal of Petroleum Technology and other Society of Petroleum Engineers publications contain many of the journal papers. Sandia National Laboratories reports are the majority of the published reports. Abstracts are included only if they were published.

More Details

Parametric dependences of the 2. 63 and 2. 65. mu. m laser lines of atomic xenon

Brannon, P.J.

Preliminary results for the parametric dependences of the 2.63 and 2.65 {mu}m lines of a high-pressure xenon laser are given. The power deposition is varied from 200 to 800 W/cm{sup 3} for gas mixtures of Ar(830 Torr)/Xe(4 Torr), Ar(750 Torr)/Xe(83 Torr) and Ar(621 Torr)/He(210 Torr)/Xe(4 Torr). The 2.65 {mu}m line dominates the 2.63 {mu}m line for all gas mixtures and the ratio of the 2.63 {mu}m line intensity to that for the 2.65 {mu}m line is suppressed by the higher concentration of xenon. 13 refs., 4 figs.

More Details

IMPACTS-BRC, Version 2. 0

O; Neal, C.E.

This manual describes the procedures for implementing IMPACT-BRC Version 2.0. IMPACTS-BRC is a generic, radiological assessment code intended to be used by the US Nuclear Regulatory Commission (NRC) to evaluate petitions to classify specific waste streams as below regulatory concern (BRC). The code is designed to demonstrate compliance to BRC standards by modeling and calculating annual radiological impacts to the maximal individual, critical groups, and the general population as the result of transportation treatment, disposal, and post-disposal activities involving low-level radioactive waste. Impacts are calculated for multiple nuclides and pathways depending on data input and treatment and disposal options specified by the code user. The treatment and disposal options include onsite incineration, offsite incineration at municipal and hazardous waste landfills. Included within the disposal options is the ability to calculate impacts from the sorting and/or recycling of metal containers and metal and glass materials. Nuclide-specific accounting is provided to facilitate identification of the critical nuclides and pathways contributing to the impacts. Default environmental and facility parameters are developed from reference treatment/disposal sites. The user has the option to replace default parameters with site-specific parameters to provide more realistic estimation of impacts. 8 refs., 10 figs., 44 tabs.

More Details

Numerical simulation of a split cavity oscillator driven by a magnetized, relativistic, electron beam

Lemke, Raymond W.

The split cavity oscillator is a resonant cavity device which can be used to highly modulate the current of a relativistic electron beam for the purpose of generating high power microwaves. It consists of a cylindrical cavity resonator which has been divided into two identical cavities by a conducting foil whose radius is less than the inner radius of the cylinder. The gap between the foil endpoint and cylinder walls forms an annular slot which couples the cavities electromagnetically. Using a particle-in-cell code, we have performed a numerical investigation of SCO structures driven by high current, magnetized, annular, relativistic electron beams. Results are presented which illustrate the dependence of current modulation efficiency and oscillation frequency on injected beam current density. In addition, simulation results are presented for a new, double-foil SCO which indicate significantly enhanced performance in comparison to the single-foil device. 10 refs., 10 figs., 2 tabs.

More Details

Performance problems of dimensional measurement systems

Gonzales, J.F.

The purposes of this one day meeting were to identify and to consolidate the issues associated with the performance of dimensional measurement systems as indicated by the results of the DOD Quality Assurance Council, the National Science Foundation, the Rich Walker GIDEP Alert, the B89 Standards Committee's work, IMOG Measurement Technology Subgroup discussions, NIST, and the CAM-I DITS (Dimensional Inspection Technologies Standards) Project. The expected results were a clearer definition and understanding of the problems, establishment of objectives for problem resolution, an approach to resolve the problems, and the identification of potential funding requirements and sources. 10 figs.

More Details
Results 100151–100175 of 100,993
Results 100151–100175 of 100,993
Top