Publications

Results 97901–97925 of 100,993

Search results

Jump to search filters

Portable, solid state, fiber optic coupled Doppler interferometer system for detonation and shock diagnostics

Fleming, K.J.

VISAR (Velocity Interferometer System for Any Reflector) is a specialized Doppler interferometer system that is gaining world-wide acceptance as the standard for shock phenomena analysis. The VISAR`s large power and cooling requirements, and the sensitive and complex nature of the interferometer cavity has restricted the traditional system to the laboratory. This paper describes the new portable VISAR, its peripheral sensors, and the role it played in optically measuring ground shock of an underground nuclear detonation (UGT). The Solid State VISAR uses a prototype diode pumped Nd:YAG laser and solid state detectors that provide a suitcase-size system with low power requirements. A special window and sensors was developed for fiber optic coupling (1 kilometer long) to the VISCAR. The system has proven itself as reliable, easy to use instrument that is capable of field test use and rapid data reduction using only a notebook personal computer (PC).

More Details

Using consumer IC packages in harsh high reliability applications

Palmer, David W.

The improvements in purity of molding materials, the IC wafer passivation layers, and manufacturing quality have resulted over the last decade in extremely high reliability in commercial IC packages. In contrast the ceramic/hermetic package world is suffering from limited availability of the newest IC chips, higher cost, larger size, and decreasing quality and fewer manufacturing lines. Traditional manufacturing line qualification tests are a good start for conversion to commercial plastic parts. However, the use of standard sensitive test chips instead of product die is necessary to perform affordable, quantitative evaluations. These test chips have many integrated sensors measuring chemical, mechanical, thermal, and electrical degradation caused by manufacturing and the package environment. Besides visual, electrical test, and burn-in little has been documented on 100% nondestructive screening of plastic molded parts. Based on realistic process control and system engineer cultural expectations, user screening is necessary. Nondestructive tests of moisture and temperature excursion susceptibility are described.

More Details

Simulation of structural response using a recurrent radial basis function network

Paez, Thomas L.

System behaviors can be accurately simulated using artificial neural networks (ANNs), and one that performs well in simulation of structural response is the radial basis function network. A specific implementation of this is the connectionist normalized linear spline (CNLS) network, investigated in this study. A useful framework for ANN simulation of structural response is the recurrent network. This framework simulates the response of a structure one step at a time. It requires as inputs some measures of the excitation, and the response at previous times. On output, the recurrent ANN yields the response at some time in the future. This framework is practical to implement because every ANN requires training, and this is executed by showing the ANN examples of correct input/output behavior (exemplars), and requiring the ANN to simulate this behavior. In practical applications, hundreds or, perhaps, thousands, of exemplars are required for ANN training. The usual laboratory and non-neural numerical applications to be simulated by ANNs produce these amounts of information. Once the recurrent ANN is trained, it can be provided with excitation information, and used to propagate structural response, simulating the response it was trained to approximate. The structural characteristics, parameters in the CNLS network, and degree of training influence the accuracy of approximation. This investigation studies the accuracy of structural response simulation for a single-degree-of-freedom (SDF), nonlinear system excited by random vibration loading. The ANN used to simulate structural response is a recurrent CNLS network. We investigate the error in structural system simulation.

More Details

Charged particle dynamics in the acceleration gap of the PBFA II ion diode

Bailey, James E.

We are improving the understanding of pulsed-power-driven ion diodes using measurements of the charged particle distributions in the diode anode-cathode (AK) gap. We measure the time - and space-resolved electric field in the AK gap using Stark-shifted Li I 2s-2p emission. The ion density in the gap is determined from the electric field profile and the ion current density. The electron density is inferred by subtracting the net charge density, obtained from the derivative of the electric field profile, from the ion density. The measured electric field and charged particle distributions are compared with results from QUICKSILVER, a 3D particle-in-cell computer code. The comparison validates the fundamental concept of electron build-up in the AK gap. However, the PBFA II diode exhibits considerably richer physics than presently contained in the simulation, suggesting improvements both to the experiments and to our understanding of ion diode physics.

More Details

A test of the Arrhenius extrapolation assumption for a nitrile rubber

Gillen, Kenneth T.

The Arrhenius relation predicts a linear relation between log of time to property change and inverse absolute temperature, with the Arrhenius activation energy E{sub a} given from the slope. For a nitrile rubber, Arrhenius behavior is observed for elongation vs air-oven aging temperature, with a E{sub a} of 22 kcal/mol. Confidence in extrapolation to low temperatures can be increased by measuring oxygen consumption. From 95 to 52 C, the E{sub a} for oxygen consumption is identical to that for elongation; however, below 52 C, the E{sub a} for oxygen consumption drops slightly to 18 kcal/mol, indicating that the extrapolation assumption probably overestimates the tensile property lifetime by a factor of about 2 at 23 C.

More Details

Prosperity Games prototyping with the board of governors of the Electronic Industries Association, January 20--21, 1994

Bermann, M.

Prosperity Games are an outgrowth and adaptation of move/countermove and seminar War Games. Prosperity Games are simulations that explore complex issues in a variety of areas including economics, politics, sociology, environment, education and research. These issues can be examined from a variety of perspectives ranging from a global, macroeconomic and geopolitical viewpoint down to the details of customer/supplier/market interactions in specific industries. All Prosperity Games are unique in that both the game format and the player contributions vary from game to game. This report documents the Prosperity Game conducted under the sponsorship of the Electronic Industries Association. Almost all of the players were from the electronics industry. The game explored policy changes that could enhance US competitiveness in the manufacturing of consumer electronics. Four teams simulated a presidentially appointed commission comprised of high-level representatives from government, industry, universities and national laboratories. A single team represented the foreign equivalent of this commission, formed to develop counter strategies for any changes in US policies. The deliberations and recommendations of these teams provide valuable insights as to the views of this industry concerning policy changes, foreign competition, and the development, delivery and commercialization of new technologies.

More Details

Selecting features from spatial data for use in stochastic simulation

Rutherford, Brian

An assessment of the long term containment capabilities of a possible nuclear waste disposal site requires both an understanding of the hydrogeology of the region under consideration and an assessment of the uncertainties associated with this understanding. Stochastic simulation - the generation of random {open_quotes}realizations{close_quotes} of the regions hydrogeology, consistent with the available information, provides a way to incorporate various types of uncertainty into a prediction of a complex system response such as site containment capability. One statistical problem in stochastic simulation is: What features of the data should be {open_quotes}mimicked{close_quotes} in the realizations? The answer can depend on the application. A discussion is provided of some of the more common data features used in recent applications. These features include spatial covariance functions and measures of the connectivity of extreme values, as examples. Trends and new directions in this area are summarized including a brief description of some statistics (the features) presently in experimental stages.

More Details

Results of video height of charge measurement for MIDDLE KEY 4

Shagam, Richard N.

This report describes the Height of Charge measurement for the Middle Key 4 test conducted at the FCDNA Permanent High Explosives Test Site (PHETS) on 17 September, 1993. The object of the measurement was to monitor remotely the change in the height of the explosive charge suspended above the test pad once the site had been evacuated until detonation. Should the measurement have shown that the charge changed height by more than 15cm then a hold in the test was to be called so that a height adjustment in the suspension system could be made. The measurement system consisted of a remotely placed video camera linked to the test control center-based measurement computer via a fiber optical video data link, a pole mounted stationary reference target, and a target mounted on the charge bag. Measurement of the change in height was determined using image analysis software on frame grabbed images. Measurements indicate that the charge bag did not deviate from the initial surveyed height of 1747cm by more than 1cm between the last measurement made by the survey crew until detonation 40 minutes later.

More Details

Robust lateral control of highway vehicles

Byrne, Raymond H.

Vehicle lateral dynamics are affected by vehicle mass, longitudinal velocity, vehicle inertia, and the cornering stiffness of the tires. All of these parameters are subject to variation, even over the course of a single trip. Therefore, a practical lateral control system must guarantee stability, and hopefully ride comfort, over a wide range of parameter changes. This paper describes a robust controller which theoretically guarantees stability over a wide range of parameter changes. The robust controller is designed using a frequency domain transfer function approach. An uncertainty band in the frequency domain is determined using simulations over the range of expected parameter variations. Based on this bound, a robust controller is designed by solving the Nevanlinna-Pick interpolation problem. The performance of the robust controller is then evaluated over the range of parameter variations through simulations.

More Details

HEISHI: A fuel performance model for space nuclear applications

Young, Mary L.

HEISHI is a Fortran computer model designed to aid in analysis, prediction, and optimization of fuel characteristics for use in Space Nuclear Thermal Propulsion (SNTP). Calculational results include fission product release rate, fuel failure fraction, mode of fuel failure, stress-strain state, and fuel material morphology. HEISHI contains models for decay chain calculations of retained and released fission products, based on an input power history and release coefficients. Decay chain parameters such as direct fission yield, decay rates, and branching fractions are obtained from a database. HEISHI also contains models for stress-strain behavior of multilayered fuel particles with creep and differential thermal expansion effects, transient particle temperature profile, grain growth, and fuel particle failure fraction. Grain growth is treated as a function of temperature; the failure fraction depends on the coating tensile strength, which in turn is a function of grain size. The HEISHI code is intended for use in analysis of coated fuel particles for use in particle bed reactors; however, much of the code is geometry-independent and applicable to fuel geometries other than spherical.

More Details

Activities at the FAA aging aircraft NDI validation center

Shurtleff, W.

Aging Aircraft NDI Validation Center (AANC) was established by the FAA Technical Center (FAATC) at Sandia National Laboratories in August of 1991. The Validation Center supports the inspection portion of the FAA`s National Aging Aircraft Program which was mandated by Congress in the 1988 Aviation Safety Act. The ultimate customers of the AANC include the FAA, airframe and engine manufacturers, airlines, and third party maintenance facilities. One goal of the AANC is to provide independent validation of technologies intended to enhance the structural inspection of aging commuter and transport aircraft. Another goal is to assist in transferring emerging inspection technology from other parts of the FAA`s program to the aircraft industry. The deliverables from both these activities are an assessment of the reliability and cost benefits of an inspection technology as applied to a particular inspection or class of inspections. The validation process consists of a quantitative and systematic assessment of the reliability and cost/benefits on a Nondestructive Inspection (NDI) process. A NDI process is defined as the NDI systems and procedures used for inspections. This includes the NDI operator, inspection environment, and the object being inspected. The phases of the validation process are: 1. Conceptual, 2. Preliminary design, 3. Final design, and 4. Field implementation. The AAANC usually gets involved in the validation process during Phases 2 and 3. The Center supports field trials with a full array of test specimens and established procedures for conducting the trials. Phase 4 reliability includes field trials using independent inspectors either at the Center`s hangar or at outside maintenance facilities. Three activities are summarized below where inspection technology has been validated in the field. These are: (1) eddy current inspection reliability experiment; (2) magneto optic imager validation; and (3) inspection tool improvement.

More Details

Low electron beam energy CIVA analysis of passivated ICs

Cole Jr., E.I.; Soden, J.M.; Dodd, B.A.; Henderson, C.L.

Low Energy Charge-Induced Voltage Alteration (LECIVA) is a new scanning electron microscopy technique developed to localize open conductors in passivated ICs. LECIVA takes advantage of recent experimental work showing that the dielectric surface equilibrium voltage has an electron flux density dependence at low electron beam energies ({le}1.0 keV). The equilibrium voltage changes from positive to negative as the electron flux density is increased. Like Charge-Induced Voltage Alteration (CIVA), LECIVA images are produced from the voltage fluctuations of a constant current power supply as an electron beam is scanned over the IC surface. LECIVA image contrast is generated only by the electrically open part of a conductor, yielding, the same high selectivity demonstrated by CIVA. Because LECIVA is performed at low beam energies, radiation damage by the primary electrons and x-rays to MOS structures is far less than that caused by CIVA. LECIVA may also be performed on commercial electron beam test systems that do not have high primary electron beam energy capabilities. The physics of LECIVA signal generation are described. LECIVA imaging examples illustrate its utility on both a standard scanning electron microscope (SEM) and a commercial electron beam test system.

More Details

Ion emission intensity ratios as a function of electrode gap, melting current, and pressure during low current vacuum arc remelting

Williamson, Rodney L.

The arc energy distribution in the electrode gap plays a central role in the vacuum arc remelting (VAR) process. However, very little has been done to investigate the response of this important process variable to changes in process parameters. Emission spectroscopy was used to investigate variations in arc energy in the annulus of a VAR furnace during melting of 0.43 m diameter Alloy 718 electrode into 0.51 in diameter ingot. Time averaged (1 second) intensity data from various chromium atom and ion (Cr{sup +}) emission lines were simultaneously collected and selected intensity ratios were subsequently used as air energy indicators. These studies were carried out as a function of melting current, electrode gap, and CO partial pressure. The data were modeled and the ion electronic energy was found to be a function of electrode gap, the energy content of the ionic vapor decreasing with increasing gap length; the ion ratios were not found to be sensitive to pressure. On the other hand, the chromium atom electronic energy was difficult to model in the factor space investigated, but was determined to be sensitive, to pressure. The difference in character of the chromium ion and atom energy fluctuations in the furnace annulus are attributed to the difference in the origins of these arc species and the non-equilibrium nature of the metal vapor arc. Most of the ion population is emitted directly from cathode spots, whereas much of the atomic vapor arises due to vaporization from the electrode and pool surfaces. Also, the positively charged ionic species interact more strongly with the electron gas than the neutral atomic species, the two distributions never equilibrating due to the low pressure.

More Details

The GPS Burst Detector W-Sensor

Mccrady, D.D.; Phipps, P.

The NAVSTAR satellites have two missions: navigation and nuclear detonation detection. The main objective of this paper is to describe one of the key elements of the Nuclear Detonation Detection System (NDS), the Burst Detector W-Sensor (BDW) that was developed for the Air Force Space and Missle Systems Center, its mission on GPS Block IIR, and how it utilizes GPS timing signals to precisely locate nuclear detonations (NUDET). The paper will also cover the interface to the Burst Detector Processor (BDP) which links the BDW to the ground station where the BDW is controlled and where data from multiple satellites are processed to determine the location of the NUDET. The Block IIR BDW is the culmination of a development program that has produced a state-of-the-art, space qualified digital receiver/processor that dissipates only 30 Watts, weighs 57 pounds, and has a 12in. {times} l4.2in. {times} 7.16in. footprint. The paper will highlight several of the key multilayer printed circuit cards without which the required power, weight, size, and radiation requirements could not have been met. In addition, key functions of the system software will be covered. The paper will be concluded with a discussion of the high speed digital signal processing and algorithm used to determine the time-of-arrival (TOA) of the electromagnetic pulse (EMP) from the NUDET.

More Details

VUV spectroscopic observations on the SABRE applied-B ion diode

Filuk, A.B.; Nash, T.J.; Noack, D.D.

We are using VUV spectroscopy to study the ion source region on the SABRE applied-B extraction ion diode. The VUV diagnostic views the anode-cathode gap perpendicular to the ion acceleration direction, and images a region 0--1 mm from the anode onto the entrance slit of a I m normal-incidence spectrometer. Time resolution is obtained by gating multiple striplines of a CuI- or MgF{sub 2} -coated micro-channel plate intensifier. We report on results with a passive proton/carbon ion source. Lines of carbon and oxygen are observed over 900--1600 {angstrom}. The optical depths of most of the lines are less than or of order 1. Unfolding the Doppler broadening of the ion lines in the source plasma, we calculate the contribution of the source to the accelerated C IV ion micro-divergence as 4 mrad at peak power. Collisional-radiative modeling of oxygen line intensities provides the source plasma average electron density of 7{times}10{sup 16} cm{sup {minus}3} and temperature of 10 eV Measurements are planned with a lithium ion source and with VUV absorption spectroscopy.

More Details

Unlimited-bandwidth distributed optical phase modulators and detectors: Design and fabrication issues

Vawter, G.A.; Hietala, V.M.; Kravitz, S.H.; Armendariz, M.G.

Practical and theoretical limits on the bandwidth of distributed optical phase modulators and traveling-wave photodetectors are given. For the case of perfect velocity matching, RF transmission losses are the main performance-limiting factor. However, some high-performance modulators require highly-capacitive transmission lines making proper slow-wave operation difficult to achieve.

More Details

Evaluation of conservatisms and environmental effects in ASME Code, Section III, Class 1 fatigue analysis

Nakos, James T.

This report documents the results of a study regarding the conservatisms in ASME Code Section 3, Class 1 component fatigue evaluations and the effects of Light Water Reactor (LWR) water environments on fatigue margins. After review of numerous Class 1 stress reports, it is apparent that there is a substantial amount of conservatism present in many existing component fatigue evaluations. With little effort, existing evaluations could be modified to reduce the overall predicted fatigue usage. Areas of conservatism include design transients considerably more severe than those experienced during service, conservative grouping of transients, conservatisms that have been removed in later editions of Section 3, bounding heat transfer and stress analysis, and use of the ``elastic-plastic penalty factor`` (K{sub 3}). Environmental effects were evaluated for two typical components that experience severe transient thermal cycling during service, based on both design transients and actual plant data. For all reasonable values of actual operating parameters, environmental effects reduced predicted margins, but fatigue usage was still bounded by the ASME Section 3 fatigue design curves. It was concluded that the potential increase in predicted fatigue usage due to environmental effects should be more than offset by decreases in predicted fatigue usage if re-analysis were conducted to reduce the conservatisms that are present in existing component fatigue evaluations.

More Details

Effective-stress-law behavior of Austin chalk rocks for deformation and fracture conductivity

Warpinski, Norman R.

Austin chalk core has been tested to determine the effective law for deformation of the matrix material and the stress-sensitive conductivity of the natural fractures. For deformation behavior, two samples provided data on the variations of the poroelastic parameter, {alpha}, for Austin chalk, giving values around 0.4. The effective-stress-law behavior of a Saratoga limestone sample was also measured for the purpose of obtaining a comparison with a somewhat more porous carbonate rock. {alpha} for this rock was found to be near 0.9. The low {alpha} for the Austin chalk suggests that stresses in the reservoir, or around the wellbore, will not change much with changes in pore pressure, as the contribution of the fluid pressure is small. Three natural fractures from the Austin chalk were tested, but two of the fractures were very tight and probably do not contribute much to production. The third sample was highly conductive and showed some stress sensitivity with a factor of three reduction in conductivity over a net stress increase of 3000 psi. Natural fractures also showed a propensity for permanent damage when net stressed exceeded about 3000 psi. This damage was irreversible and significantly affected conductivity. {alpha} was difficult to determine and most tests were inconclusive, although the results from one sample suggested that {alpha} was near unity.

More Details

Virtual enterprise model for the electronic components business in the Nuclear Weapons Complex

Long, Kevin R.

The electronic components business within the Nuclear Weapons Complex spans organizational and Department of Energy contractor boundaries. An assessment of the current processes indicates a need for fundamentally changing the way electronic components are developed, procured, and manufactured. A model is provided based on a virtual enterprise that recognizes distinctive competencies within the Nuclear Weapons Complex and at the vendors. The model incorporates changes that reduce component delivery cycle time and improve cost effectiveness while delivering components of the appropriate quality.

More Details

MELTER: A model of the thermal response of cargos transported in the Safe-Secure Trailer subject to fire environments for risk assessment applications

Larsen, M.E.

MELTER is an analysis of cargo responses inside a fire-threatened Safe-Secure Trailer (SST) developed for the Defense Program Transportation Risk Assessment (DPTRA). Many simplifying assumptions are required to make the subject problem tractable. MELTER incorporates modeling which balances the competing requirements of execution speed, generality, completeness of essential physics, and robustness. Input parameters affecting the analysis include those defining the fire scenario, those defining the cargo loaded in the SST, and those defining properties of the SST. For a specified fire, SST, and cargo geometry MELTER predicts the critical fire duration that will lead to a failure. The principal features of the analysis include: (a) Geometric considerations to interpret fire-scenario descriptors in terms of a thermal radiation boundary condition, (b) a simple model of the SST`s wall combining the diffusion model for radiation through optically-thick media with an endothermic reaction front to describe the charring of dimensional, rigid foam in the SST wall, (c) a transient radiation enclosure model, (d) a one-dimensional, spherical idealization of the shipped cargos providing modularity so that cargos of interest can be inserted into the model, and (e) associated numerical methods to integrate coupled, differential equations and find roots.

More Details

Measured voltages and currents internal to closed metal cylinders due to diffusion of simulated lightning currents

Schnetzer, G.H.; Fisher, R.J.

One mechanism for the penetration of lightning energy into the interior of a weapon is by current diffusion through the exterior metal case. Tests were conducted in which simulated lightning currents were driven over the exteriors of similar aluminum and ferrous steel cylinders of 0.125-in wall thickness. Under conditions in which the test currents were driven asymmetrically over the exteriors of the cylinders, voltages were measured between various test points in the interior as functions of the amplitude and duration of the applied current. The maximum recorded open-circuit voltage, which occurred in the steel cylinder, was 1.7 V. On separate shots, currents flowing on a low impedance shorting conductor between the same set of test points were also measured, yielding a maximum current of 630 A, again occurring across the interior of the steel cylinder. Under symmetrical exterior drive current conditions, a maximum end-to-end internal voltage of 4.1 V was obtained, also in the steel cylinder, with a corresponding current of 480 A measured on a coaxial conductor connected between the two end plates of the cylinder. Data were acquired over a range of input current amplitudes between about 40 and 100 kA. These data provide the experimental basis for validating models that can subsequently be applied to real weapons and other objects of interest.

More Details
Results 97901–97925 of 100,993
Results 97901–97925 of 100,993
Top