Publications

Results 97601–97625 of 100,993

Search results

Jump to search filters

Recent advances in the development of high average power induction accelerators for industrial and environmental applications

Radiation Physics and Chemistry

Neau, E.L.

Short-pulse accelerator technology developed during the early 1960's through the late 1980's is being extended to high average power systems capable of use in industrial and environmental applications. Processes requiring high dose levels and/or high volume throughput will require systems with beam power levels from several hundreds of kilowatts to megawatts. Beam accelerating potentials can range from less than 1 MeV to as much as 10 MeV depending on the type of beam, depth of penetration required, and the density of the product being treated. This paper addresses the present status of a family of high average power systems, with output beam power levels up to 200 kW, now in operation that use saturable core switches to achieve output pulse widths of 50 to 80 nanoseconds. Inductive adders and field emission cathodes are used to generate beams of electrons or x-rays at up to 2.5 MeV over areas of 1000 cm2. Similar high average power technology is being used at ≤ 1 MeV to drive repetitive ion beam sources for treatment of material surfaces over 100's of cm2. © 1995.

More Details

Performance of an Induction Coil Launcher

IEEE Transactions on Magnetics

Shokair, Isaac R.

Performance of an electromagnetic induction launcher is considered for three types of armatures. These are: solid, 1-element wound and 16-element wound aluminum armatures. The one element wound armature has uniform current density throughout and thus can withstand field reversal (working against embedded armature flux) and still maintain low temperature. Slingshot simulations were performed for several configurations. Best performance was obtained for a single element wound armature with two field reversals. For a 60 kg projectile, 10.5 cm coil inner radius and 5.5 cm coil build, the velocity after 50 meters of launcher length (670 stages) exceeded 3.5 km/sec with an overall efficiency of about 45%. For the same parameters the solid and 16-element wound armatures reach a velocity of about 3.3 km/sec after 800 stages (60 meters of launcher length) but without field reversal. A velocity of 3.5 km/sec is possible after 60 meters of launcher length with the 16-element wound armature with one field reversal, but the temperature is close to the melting temperature of aluminum. In all simulations with a solid armature, melting of some of the surface material occurs. However, it is shown that most of the melting occurs after contribution has been made to the forward going pressure, that is, melting does not affect the electrical performance of the launcher. The effect of coil firing time jitter on launcher performance is also considered and is found to be very small for realistic perturbations. For ± 2 μ–secs random jitter, the reduction in the final velocity for a 60 meter launcher with a solid armature is less than 0.1% and the increase in temperature is only 2%. This holds for all types of armatures. © 1995 IEEE

More Details

Investigation of cold filling receiver panels and piping in molten-nitrate-salt central-receiver solar power plants

Journal of Solar Energy Engineering, Transactions of the ASME

Pacheco, James E.

Cold filling refers to flowing a fluid through piping or tubes that are at temperatures below the fluid’s freezing point. Since the piping and areas of the receiver in a molten-nitrate salt central-receiver solar power plant must be electrically heated to maintain their temperatures above the nitrate salt freezing point (430°F, 221 °C), considerable energy could be used to maintain such temperatures during nightly shutdown and bad weather. Experiments and analyses have been conducted to investigate cold filling receiver panels and piping as a way of reducing parasitic electrical power consumption and increasing the availability of the plant. The two major concerns with cold filling are (1) how far can the molten salt penetrate cold piping before freezing closed, and (2) what thermal stresses develop during the associated thermal shock. Cold fill experiments were conducted by flowing molten salt at 550°F (288°C) through cold panels, manifolds, and piping to determine the feasibility of cold filling the receiver and piping. The transient thermal responses were measured and heat transfer coefficients were calculated from the data. Nondimensional analysis is presented which quantifies the thermal stresses in a pipe or tube undergoing thermal shock. In addition, penetration distances were calculated to determine the distance salt could flow in cold pipes prior to freezing closed. © 1995 by ASME.

More Details

Non-destructive characterization of porous silicon using x-ray reflectivity

Materials Research Society Symposium - Proceedings

Chason, E.

Understanding the evolution of porous silicon (PS) layers at the early stages of growth is important for determining the mechanism of PS film growth and controlling the film properties. We have used X-ray reflectivity (XRR) to determine the evolution of layer thickness and interfacial roughness during the growth of thin PS layers (< 200 nm) prepared by electrochemical anodization. The porous layer grows at a constant rate for films as thin as 15 nm indicating a very short incubation period during which the surface may be electropolished before the PS structure begins to form. Interface roughness measurements indicate that the top surface of the film remains relatively smooth during growth while the roughness of the PS/silicon interface increases only slightly with film thickness. The XRR results are compared with results obtained from the same films by cross-sectional transmission electron microscopy (XTEM), atomic force microscopy (AFM) and gravimetry.

More Details

Uncertainty and sensitivity analysis of food pathway results with the MACCS reactor accident consequence model

Reliability Engineering and System Safety

Helton, J.C.; Johnson, J.D.; Rollstin, J.A.; Shiver, A.W.; Sprung, J.L.

Uncertainty and sensitivity analysis techniques based on Latin hypercube sampling, partial correlation analysis and stepwise regression analysis are used in an investigation with the MACCS model of the food pathways associated with a severe accident at a nuclear power station. The primary purpose of this study is to provide guidance on the variables to be considered in future review work to reduce the uncertainty in the important variables used in the calculation of reactor accident consequences. The effects of 87 imprecisely-known input variables on the following reactor accident consequences are studied: crop growing-season dose, crop long-term dose, milk growing-season dose, total food pathways dose, total ingestion pathways dose, total long-term pathways dose, area dependent cost, crop disposal cost, milk disposal cost, condemnation area, crop disposal area and milk disposal area. When the predicted variables are considered collectively, the following input variables were found to be the dominant contributors to uncertainty: fraction of cesium deposition on grain fields that is retained on plant surfaces and transferred directly to grain, maximum allowable ground concentrations of Cs-137 and Sr-90 for production of crops, ground concentrations of Cs-134, Cs-137 and I-131 at which the disposal of milk will be initiated due to accidents that occur during the growing season, ground concentrations of Cs-134, I-131 and Sr-90 at which the disposal of crops will be initiated due to accidents that occur during the growing season, rate of depletion of Cs-137 and Sr-90 from the root zone, transfer of Sr-90 from soil to legumes, transfer of Cs-137 from soil to pasture, transfer of cesium from animal feed to meat, and the transfer of cesium, iodine and strontium from animal feed to milk. © 1995.

More Details

Uncertainty and sensitivity analysis of chronic exposure results with the MACCS reactor accident consequence model

Reliability Engineering and System Safety

Helton, J.C.; Johnson, J.D.; Rollstin, J.A.; Shiver, A.W.; Sprung, J.L.

Uncertainty and sensitivity analysis techniques based on Latin hypercube sampling, partial correlation analysis and stepwise regression analysis are used in an investigation with the MACCS model of the chronic exposure pathways associated with a severe accident at a nuclear power station. The primary purpose of this study is to provide guidance on the variables to be considered in future review work to reduce the uncertainty in the important variables used in the calculation of reactor accident consequences. The effects of 75 imprecisely known input variables on the following reactor accident consequences are studied: crop growing-season dose, crop long-term dose, water ingestion dose, milk growing-season dose, long-term groundshine dose, long-term inhalation dose, total food pathways dose, total ingestion pathways dose, total long-term pathways dose, total latent cancer fatalities, area-dependent cost, crop disposal cost, milk disposal cost, population-dependent cost, total economic cost, condemnation area, condemnation population, crop disposal area and milk disposal area. When the predicted variables are considered collectively, the following input variables were found to be the dominant contributors to uncertainty: dry deposition velocity, transfer of cesium from animal feed to milk, transfer of cesium from animal feed to meet, ground concentration of Cs-134 at which the disposal of milk products will be initiated, transfer of Sr-90 from soil to legumes, maximum allowable ground concentration of Sr-90 for production of crops, fraction of cesium entering surface water that is consumed in drinking water, groundshine shielding factor, scale factor defining resuspension, dose reduction associated with decontamination, and ground concentration of I-131 at which disposal of crops will be initiated due to accidents that occur during the growing season. Reducing the uncertainty in the preceding variables was found to substantially reduce the uncertainty in the predicted variables under consideration. For total number of latent cancer fatalities, the dominant variable was dry deposition velocity, with small effects indicated for a large number of additional variables. © 1995.

More Details

Phase correction in two-crystal optical parametric oscillators

Proceedings of SPIE - The International Society for Optical Engineering

Armstrong, Darrell J.

The effect of the pump, signal, and idler wave phases on three-wave nonlinear parametric mixing is investigated in a series of single-pass- gain experiments. Measurements are made with two angle-tuned KTP crystals in a 532 nm pumped, walkoff-compensated, optical parametric amplifier that is seeded by an 800 nm cw diode laser. In one of the measurements the second crystal is orientated to have its effective nonlinearity deff. of opposite sign to that of the first crystal, so that all mixing that occurred in the first crystal is canceled by the second when the phase mismatch Δkcrystal 1 = Δkcrystal 2 = 0. Efficient two-crystal amplification is subsequently restored by selecting the correct phase relationship for the three waves entering the crystal by inserting a dispersive plate between the crystals. The experimental results are explained in a straightforward manner with diagrams involving the three input wave polarizations. These results demonstrate that walkoff-compensated geometries require phase correction to achieve efficient mixing in the second crystal whenever the nonlinear interaction involves two extraordinary waves (e-waves). One practical application of this work may be lower oscillation thresholds and enhanced performance in walkoff-compensated optical parametric oscillators which use two e-waves.

More Details

Dynamx: A low temperature microgravity investigation of phase transitions

33rd Aerospace Sciences Meeting and Exhibit

Duncan, R.V.

The Critical Dynamics in Microgravity Experiment, DYNAMX, is under development for space flight at Sandia National Laboratories and the University of New Mexico with Dr. Rob Duncan as the Principal Investigator. This experiment will investigate the effects on the superfluid transition in 4He of currents generated by heat flow, measuring the thermal conductivity in the fluid as a function of applfed heat. DYNAMX will also take advantage of the weightless environment to measure the conductivity properties in the region of the interface between the two phases. Thus, DYNAMX represents an experiment that will explore a system driven far from equilibrium. The experiment development is sponsored by the Microgravity Science and Applications Division of NASA, with the Jet Propulsion Laboratory as the managing center. This paper will describe the science objectives, the current design of the experiment apparatus, the steps being taken to prepare this experiment for flight, and the results of ground-based feasibility demonstrations now underway.

More Details

Optical determinations of energy-band dispersion curves in novel compound semiconductor materials

Proceedings of SPIE - The International Society for Optical Engineering

Jones, Eric D.

We present magnetoluminescence data which provides a quantitative measure of the energy- band dispersion curves of novel compound semiconductor optoelectronic materials. Data for a n-type strained-layer InGaAs/GaAs (quantum-well width approximately 8 nm) and a n-type 4.5 nm-wide GaAs/AlGaAs lattice-matched single-quantum well are presented. We find that the conduction-bands are almost parabolic, with a mass of about 0.068m0 for the GaAs/AlGaAs structure. The valence-bands are nonparabolic with wave vector dependent in- plane valence-band masses varying from about 0.1m0 at zone center to about 0.3m0 for 20 meV energies.

More Details

Effects of acetylacetone additions on PZT thin film processing

Materials Research Society Symposium - Proceedings

Schwartz, Robert W.

Sol-gel processing methods are frequently used for the fabrication of lead zirconate titanate (PZT) thin films for many electronic applications. Our standard approach for film fabrication utilizes lead acetate and acetic acid modified metal alkoxides of zirconium and titanium in the preparation of our precursor solutions. This report highlights some of our recent results on the effects of the addition of a second chelating ligand, acetylacetone, to this process. We discuss the changes in film drying behavior, densification and ceramic microstructure which accompany acetylacetone additions to the precursor solution and relate the observed variations in processing behavior to differences in chemical precursor structure induced by the acetylacetone ligand. Improvements in thin film microstructure, ferroelectric and optical properties are observed when acetylacetone is added to the precursor solution.

More Details

Optical features of nanosize iron and molybdenum sulfide clusters

Materials Research Society Symposium - Proceedings

Wilcoxon, Jess P.

Since both FeS2 and MoS2 are optically opaque and have bandgaps in the near IR, photochemical applications of these materials are non-existent. It is however demonstrated in the study that nanosize FeS2 and MoS2 have bandgaps that can be adjusted to the visible and even UV region of the spectrum by control of the cluster size. Discussed are measurements of size, structure, optical absorbance and photoemission for these new materials. Also, briefly outlines are synthetic procedures and novel methods for chemical processing of these nanoclusters.

More Details

Anomalous phase separation kinetics observed in a micelle system

Materials Research Society Symposium - Proceedings

Wilcoxon, Jess P.

We report a real-time, two-dimensional light scattering study of the evolution of structure of a two component nonionic micelle system undergoing phase separation. The micelles act like molecular slug-a-beds whose domain growth is pathetically lathargic (i.e. slower than the cube root of time prediction for simple binary fluids). In fact, the growth kinetics can be empirically described as a stretched exponential approach to a pinned domain size. Although the kinetics are not yet understood, this anomalous behavior may be due to the ability of the spherical micelles to reorganize into more complex structures.

More Details

Vibration suppression of fixed-time jib crane maneuvers

Proceedings of SPIE - The International Society for Optical Engineering

Parker, Gordon G.

A jib crane consists of a pendulum-like end line attached to a rotatable jib. Within this general category of cranes there exist devices with multiple degrees of freedom including variable load-line length and variable jib length. These cranes are commonly used for construction and transportation applications. Point-to-point payload maneuvers using jib cranes are performed so as not to excite the spherical pendulum modes of their cable and payload assemblies. Typically, these pendulum modes, although time-varying, exhibit low frequencies. The resulting maneuvers are therefore performed slowly, contributing to high construction and transportation costs. The crane considered here consists of a spherical pendulum attached to a rigid jib. The other end of the jib is attached to a direct drive motor of generating rotational motion. A general approach is presented for determining the open-loop trajectories for the jib rotation for accomplishing fixed-time, point-to-point, residual oscillation free, symmetric maneuvers. These residual oscillation free trajectories purposely excite the pendulum modes in such a way that at the end of the maneuver the oscillatory degrees of freedom are quiescent. Simulation results are presented with experimental verification.

More Details

First-principles calculations for AlN, GaN, and InN: bulk and alloy properties

Proceedings of SPIE - The International Society for Optical Engineering

Wright, Alan F.

First-principles density-functional calculations utilizing ab initio pseudopotentials and plane- wave expansions are used to determine lattice parameters, bulk moduli, and band structures for AlN, GaN, and InN. It is found that large numbers of plane waves are necessary to resolve the nitrogen 2p wave functions and that explicit treatment of the gallium 3d and indium 4d electrons is important for an accurate description of GaN and InN. Several properties of ternary zinc-blende alloys are determined including their bond-length and bond-angle relaxation and their energy-gap bowing parameters. The similarity of the calculated zinc- blende and wurtzite direct gaps also allows estimates to be made of the energy gap versus composition for wurtzite alloys.

More Details

Adaptive path planning: algorithm and analysis

Proceedings - IEEE International Conference on Robotics and Automation

Chen, Pang C.

To address the need for a fast path planner, we present a learning algorithm that improves path planning by using past experience to enhance future performance. The algorithm relies on an existing path planner to provide solutions to difficult tasks. From these solutions, an evolving sparse network of useful robot configurations is learned to support faster planning. More generally, the algorithm provides a framework in which a slow but effective planner may be improved both cost-wise and capability-wise by a faster but less effective planner coupled with experience. We analyze the algorithm by formalizing the concept of improvability and deriving conditions under which a planner can be improved within the framework. The analysis is based on two stochastic models, one pessimistic (on task complexity), the other randomized (on experience utility). Using these models, we derive quantitative bounds to predict the learning behavior. We use these estimation tools to characterize the situations in which the algorithm is useful and to provide bounds on the training time. In particular, we show how to predict the maximum achievable speedup. Additionally, our analysis techniques are elementary and should be useful for studying other types of probabilistic learning as well.

More Details

Magneto-optical studies of compound semiconductors

Journal of Physics and Chemistry of Solids

Jones, Eric D.

A simultaneous determination of both the conduction and valence-band dispersion curves (and masses) from a single compound semiconductor quantum-well structure using magnetoluminescence is discussed. Data from InGaAs/GaAs strained-single-quantum wells and GaAs/AlGaAs lattice matched quantum wells are presented. The conduction bands are found to be parabolic for densities approaching 1 × 1012cm-2. However, the valence bands are highly nonparabolic and strongly affected by heavy-hole light-hole mixing. © 1995.

More Details

Alternative barrier layers for surface covers in dry climates

Geotechnical Special Publication

Stormont, John C.

Barrier layers to limit percolation through cover systems are principal features of engineered, multi-component cover designs. Conventional barrier layer components developed for humid climates have limitations in dry climates. One alternative barrier layer is a capillary barrier, which consists of a fine-over-coarse soil arrangement. The capacity of capillary barriers to laterally divert downward moving water is the key to their success. Another alternative is a dry barrier, in which atmospheric air is circulated through a coarse layer within the cover to remove water vapor. Incorporating a coarse layer which stores water for subsequent removal by air flow reduces the requirements for the air flow velocity and increases the applicability of the dry barrier.

More Details

Current state of knowledge on the behavior of steel liners in concrete containments subjected to overpressurization loads

Nuclear Engineering and Design

Von Riesemann, W.A.; Parks, M.B.

In the US, concrete containment buildings for commercial nuclear power plants have steel liners that act as the internal pressure boundary. The liner abuts the concrete, acting as the interior concrete form. The liner is attached to the concrete by either studs or by a continuous structural shape (such as a T-section or channel) that is either continuously or intermittently welded to the liner. Studs are commonly used in reinforced concrete containments, while prestressed containments utilize a structural element as the anchorage. The practice in some countries follows the US practice, while in other countries the containment does not have a steel liner. In this latter case, there is a true double containment, and the annular region between the two containments is vented. This paper will review the practice of design of the liner system prior to the consideration of severe accident loads (overpressurization loads beyond the design conditions). An overpressurization test of a 1:6 scale reinforced concrete containment at Sandia National Laboratories resulted in a failure mechanism in the liner that was not fully anticipated. Post-test analyses and experiments have been conducted to understand the failure better. This work and the activities that followed the test are reviewed. Areas in which additional research should be conducted are given. © 1995.

More Details

Axial focusing of energy from a hypervelocity impact on earth

International Journal of Impact Engineering

Boslough, Mark

We have performed computational simulations to determine how energy from a large hypervelocity impact on the Earth's surface would couple to its interior. Because of the first-order axial symmetry of both the impact energy source and the stress-wave velocity structure of the Earth, a disproportionate amount of energy is dissipated along the axis defined by the impact point and its antipode (point opposite the impact). For a symmetric and homogeneous Earth model, all the impact energy that is radiated as seismic waves into the Earth at a given takeoff angle (ray parameter), independent of azimuthal direction, is refocused (minus attenuation) on the axis of symmetry, regardless of the number of reflections and refractions it has experienced. Material on or near the axis of symmetry experiences more strain cycles with much greater amplitude than elsewhere, and therefore experiences more irreversible heating. The focusing is most intense in the upper mantle, within the asthenosphere, where seismic energy is most effectively converted to heat. For a sufficiently energetic impact, this mechanism might generate enough local heating to create an isostatic instability leading to uplift, possibly resulting in rifting, volcanism, or other rearrangement of the interior dynamics of the planet. These simulations demonstrate how hypervelocity impact energy can be transported to the Earth's interior, supporting the possibility of a causal link between large impacts on Earth and major internally-driven geophysical processes. © 1995.

More Details

Human event observations in the individual plant examinations

Forester, John A.

A major objective of the Nuclear Regulatory Commission`s (NRC) Individual Plant Examination (IPE) Insights Program is to identify the important determinants of core damage frequency (CDF) for the different reactor and containment types and plant designs as indicated in the IPEs. The human reliability analysis (HRA) is a critical component of the probabilistic risk assessments (PRAS) which were done for the IPES. The determination and selection of human actions for incorporation into the event and fault tree models and the quantification of their failure probabilities can have an important impact on the resulting estimates of CDF and risk. Therefore, two important goals of the NRCs IPE Insights Program are (1) to determine the extent to which human actions and their corresponding failure probabilities influenced the results of the IPEs and (2) to identify which factors played significant roles in determining the differences and similarities in the results of the HRA analyses across the different plants. To obtain the relevant information, the NRC`s IPE database, which contains information on plant design, CDF, and containment performance obtained from the IPES, was used in conjunction with a systematic examination of the HRA analyses and results from the IPES. Regarding the extent to which the results of the HRA analyses were significant contributors to the plants` CDFs, examinations of several different measures indicated that while individual human actions could have important influences on CDF for particular initiators, the HRA results did not appear to be the most significant driver of plant risk (CDF). Another finding was that while there were relatively wide variations in the calculated human error probabilities (HEPs) for similar events across plants, there was no evidence for any systematic variation as a function of the HRA methods used in the analyses.

More Details

Particle transport in plasma reactors

Rader, Daniel J.

SEMATECH and the Department of Energy have established a Contamination Free Manufacturing Research Center (CFMRC) located at Sandia National Laboratories. One of the programs underway at the CFMRC is directed towards defect reduction in semiconductor process reactors by the application of computational modeling. The goal is to use fluid, thermal, plasma, and particle transport models to identify process conditions and tool designs that reduce the deposition rate of particles on wafers. The program is directed toward defect reduction in specific manufacturing tools, although some model development is undertaken when needed. The need to produce quantifiable improvements in tool defect performance requires the close cooperation among Sandia, universities, SEMATECH, SEMATECH member companies, and equipment manufacturers. Currently, both plasma (e.g., etch, PECVD) and nonplasma tools (e.g., LPCVD, rinse tanks) are being worked on under this program. In this paper the authors summarize their recent efforts to reduce particle deposition on wafers during plasma-based semiconductor manufacturing.

More Details

Transient radiation-induced absorption in materials for the DOI laser

Brannon, P.J.

This is the final report on a series of experiments concerned with transient radiation-induced absorption in materials for a Cr,Nd:GSGG laser. Both the Sandia National Laboratories SPR III pulsed reactor and the Hermes III pulsed X-ray machine are used as radiation sources. The time dependence and the magnitude of the induced absorption in filter glasses and in doped and undoped LiNbO{sub 3} Q-switch materials have been measured. Gain has been observed in Cr,Nd:GSGG, the laser medium, when it is irradiated by X-rays.

More Details

The effect of O{sub 2} intercalation on the rotational dynamics and the ordering transition of C{sub 60}

Myers, S.A.; Assink, R.A.; Schirber, J.E.; Loy, D.A.

We have used {sup 13}C magic-angle spinning (MAS) nuclear magnetic resonance (NMR) to characterize the structure and rotational dynamics of C{sub 60} containing oxygen molecules located in the interstitial sites of the fcc lattice. Under normal conditions, a narrow peak at 143.7 ppm is observed for C{sub 60}. When exposed to oxygen at moderate pressures, several additional resonances appear in the {sup 13}C MAS NMR spectrum. These secondary resonances are shifted downfield from the main peak at 143.7 ppm and are due to the Fermi-contact interaction of the paramagnetic oxygen molecules with the {sup 13}C nuclear spins. The presence of oxygen depresses the orientational ordering transition by ca. 20 K as observed by DSC. The spin-lattice relaxation time (T{sub 1}) of each secondary peak shows a minimum near the ordering transition, indicating that this transition is not dependent on the number of oxygen molecules surrounding an individual C{sub 60} molecule. The T{sub 1}, due to paramagnetic relaxation, normalized by the number of surrounding oxygen molecules, is constant. This observation demonstrates that within a given sample, the dynamics of C{sub 60} molecules are independent of the number of surrounding oxygen molecules.

More Details

Verification of computational aerodynamic predictions for complex hypersonic vehicles using the INCA{trademark} code

Payne, Jeffrey L.

This paper describes a process of combining two state-of-the-art CFD tools, SPRINT and INCA, in a manner which extends the utility of both codes beyond what is possible from either code alone. The speed and efficiency of the PNS code, SPRING, has been combined with the capability of a Navier-Stokes code to model fully elliptic, viscous separated regions on high performance, high speed flight systems. The coupled SPRINT/INCA capability is applicable for design and evaluation of high speed flight vehicles in the supersonic to hypersonic speed regimes. This paper describes the codes involved, the interface process and a few selected test cases which illustrate the SPRINT/INCA coupling process. Results have shown that the combination of SPRINT and INCA produces correct results and can lead to improved computational analyses for complex, three-dimensional problems.

More Details

Environmental Measurement-While-Drilling system for real-time field screening of contaminants

Lockwood, Grant J.

Sampling during environmental drilling is essential to fully characterize the spatial distribution and migration of near surface contaminants. However, the analysis of these samples is not only expensive, but can take weeks or months when sent to an off-site laboratory. In contrast, measurement-while-drilling (MWD) screening capability could save money and valuable time by quickly distinguishing between contaminated and uncontaminated areas. Real-time measurements provided by a MVM system would enable on-the-spot decisions to be made regarding sampling strategies, enhance worker safety, and provide the added flexibility of being able to ``steer`` the drill bit in or out hazardous zones. During measurement-while-drilling, down-hole sensors are located behind the drill bit and linked by a rapid data transmission system to a computer at the surface. As drilling proceeds, data are collected on the nature and extent of the subsurface contamination in real-time. The down-hole sensor is a Geiger-Mueller tube (GMT) gamma radiation detector. In addition to the GMT signal, the MWD system monitors these required down-hole voltages and two temperatures associated with the detector assembly. The Gamma Ray Detection System (GRDS) and electronics package are discussed in as well as the results of the field test. Finally, our conclusions and discussion of future work are presented.

More Details
Results 97601–97625 of 100,993
Results 97601–97625 of 100,993
Top