Publications

Results 96676–96700 of 100,993

Search results

Jump to search filters

Summary of field operations Powerline Wells PL-1, PL-2, PL-3

Foutz, W.L.

This report summarizes field operations and hydrogeologic data obtained during installation of the Powerline monitoring/test wells near the western boundary of Kirtland Air Force Base. These wells were installed in 1994 as part of the Site-Wide Hydrogeologic Characterization Project saturated zone investigation. The Site-Wide Hydrogeologic Characterization Project is part of Sandia National Laboratories, New Mexico, Environmental Restoration Project. Three wells were drilled and completed at this location, and named PL-1, PL-2, and PL-3. They are located northwest of Tech Area 3, and are named after a high-voltage powerline located just south of the wells. The objectives of the Powerline wells were to determine the depth to water, complete 2 water table wells and a deeper Santa Fe Group well, to determine the geologic provenance of Santa Fe Group sediments at this location, and to obtain background core samples for radiological analysis. During these field operations, important subsurface hydrogeologic data were obtained. These data include drill cuttings and lithologic descriptions, core samples with background analytical data, geophysical logs, water quality parameters, and water levels. Aquifer tests at the Powerline location will generate data that may yield information on anisotropy in the Santa Fe Group and constrain numerical modeling results that indicate that there is a major northward component of groundwater flow from McCormick Ranch and Tech Area 3 test sites toward City of Albuquerque and KAFB well fields.

More Details

Superconducting technology program: Sandia 1995 annual report

Roth, E.P.

Sandia`s STP program is a thallium-based high-temperature superconductor (HTS) research and development program consisting of efforts in powder synthesis and process development, open-system thick film conductor development, wire and tape fabrication, and HTS motor design. The objective of this work is to develop high-temperature superconducting conductors (wire and tape) capable of meeting requirements for high-power electrical devices of interest to industry. The research efforts currently underway are: (1) process development and characterization of thallium-based high-temperature superconducting closed system wire and tape; (2) investigation of the synthesis and processing of thallium-based thick films using two-zone processing; and (3) cryogenic design of a 30K superconducting motor. This report outlines the research that has been performed during FY95 in each of these areas.

More Details

Ion energy and angular distributions in inductively driven RF discharges in chlorine

Woodworth, Joseph R.

In this paper, the authors report values of ion energy distributions and ion angular distributions measured at the grounded electrode of an inductively-coupled discharge in pure chlorine gas. The inductive drive in the GEC reference cell produced high plasma densities (10{sup 11}/cm{sup 3} electron densities) and stable plasma potentials. As a result, ion energy distributions typically consisted of a single peak well separated from zero energy. Mean ion energy varied inversely with pressure, decreasing from 13 to 9 eV as the discharge pressure increased from 20 to 60 millitorr. Half-widths of the ion angular distributions in these experiments varied from 6 to 7.5 degrees, corresponding to transverse energies from 0.13 to 0.21 eV. Ion energies gradually dropped with time, probably due to the buildup of contaminants on the chamber walls. Cell temperature also was an important variable, with ion fluxes to the lower electrode increasing and the ion angular distribution narrowing as the cell temperature increased. Plasmas discharges are widely used to etch semiconductors, oxides and metals in the fabrication of integrated circuits.

More Details

Implementation and verification of a coupled fire model as a thermal boundary condition within P3/THERMAL

Hensinger, David M.

A user-defined boundary condition subroutine has been implemented within P3/THERMAL to represent the heat flux between a noncombusting object and an engulfing fire. The heat flux calculations includes a simple 2D fire model in which energy and radiative heat transport equations are solved to produce estimates of the heat fluxes at the fire-object interface. These estimates reflect radiative coupling between a cold object and the flow of hot combustion gases which has been observed in fire experiments. The model uses a database of experimental pool fire measurements for far field boundary conditions and volumetric heat release rates. Taking into account the coupling between a structure and the fire is an improvement over the {sigma}T{sup 4} approximation frequently used as a boundary condition for engineered system response and is the preliminary step in the development of a fire model with a predictive capability. This paper describes the implementation of the fire model as a P3/THERMAL boundary condition and presents the results of a verification calculation carried out using the model.

More Details

A constitutive model for representing coupled creep, fracture, and healing in rock salt

Munson, Darrell E.

The development of a constitutive model for representing inelastic flow due to coupled creep, damage, and healing in rock salt is present in this paper. This model, referred to as Multimechanism Deformation Coupled Fracture model, has been formulated by considering individual mechanisms that include dislocation creep, shear damage, tensile damage, and damage healing. Applications of the model to representing the inelastic flow and fracture behavior of WIPP salt subjected to creep, quasi-static loading, and damage healing conditions are illustrated with comparisons of model calculations against experimental creep curves, stress-strain curves, strain recovery curves, time-to-rupture data, and fracture mechanism maps.

More Details

Probability, conditional probability and complementary cumulative distribution functions in performance assessment for radioactive waste disposal

Helton, J.C.

A formal description of the structure of several recent performance assessments (PAs) for the Waste Isolation Pilot Plant (WIPP) is given in terms of the following three components: a probability space (S{sub st}, S{sub st}, p{sub st}) for stochastic uncertainty, a probability space (S{sub su}, S{sub su}, p{sub su}) for subjective uncertainty and a function (i.e., a random variable) defined on the product space associated with (S{sub st}, S{sub st}, p{sub st}) and (S{sub su}, S{sub su}, p{sub su}). The explicit recognition of the existence of these three components allows a careful description of the use of probability, conditional probability and complementary cumulative distribution functions within the WIPP PA. This usage is illustrated in the context of the U.S. Environmental Protection Agency`s standard for the geologic disposal of radioactive waste (40 CFR 191, Subpart B). The paradigm described in this presentation can also be used to impose a logically consistent structure on PAs for other complex systems.

More Details

New attitude penalty functions for spacecraft optimal control problems

Schaub, H.; Junkins, J.L.; Robinett, R.D.

A solution of a spacecraft optimal control problem, whose cost function relies on an attitude description, usually depends on the choice of attitude coordinates used. A problem could be solved using 3-2-1 Euler angles or using classical Rodriguez parameters and yield two different ``optimal`` solutions, unless the performance index in invariant with respect to the attitude coordinate choice. Another problem arising with many attitude coordinates is that they have no sense of when a body has tumbled beyond 180{degrees} from the reference attitude. In many such cases it would be easier (i.e. cost less) to let the body complete the revolution than to force it to reverse the rotation and return to the desired attitude. This paper develops a universal attitude penalty function g() whose value is independent of the attitude coordinates chosen to represent it. Furthermore, this function will achieve its maximum value only when a principal rotation of {plus_minus}180{degrees} from the target state is performed. This will implicitly permit the g() function to sense the shortest rotational distance back to the reference state. An attitude penalty function which depends on the Modified Rodriguez Parameters (MRP) will also be presented. These recently discovered MRPs are a non-singular three-parameter set which can describe any three-attitude. This MRP penalty function is simpler than the attitude coordinate independent g() function, but retains the useful property of avoiding lengthy principal rotations of more than {plus_minus}180{degrees}.

More Details

A Probabilistic environmental decision support framework for managing risk and resources

Gallegos, David P.

The ability to make cost effective, timely decisions associated with waste management and environmental remediation problems has been the subject of considerable debate in recent years. On one hand, environmental decision makers do not have unlimited resources that they can apply to come to resolution on outstanding and uncertain technical issues. On the other hand, because of the possible impending consequences associated with these types of systems, avoiding making a decision is usually not an alternative either. Therefore, a structured, quantitative process is necessary that will facilitate technically defensible decision making in light of both uncertainty and resource constraints. An environmental decision support framework has been developed to provide a logical structure that defines a cost-effective, traceable, and defensible path to closure on decision regarding compliance and resource allocation. The methodology has been applied effectively to waste disposal problems and is being adapted and implemented in subsurface environmental remediation problems.

More Details

Moving mass trim control system design

Byrne, Raymond H.

This paper describes the design of a moving mass trim control system for maneuvering axisymmetric reentry vehicles. The moving mass trim controller is composed of three equal masses that are independently positioned in order to deliver a desired center of mass position. For a slowly spinning reentry vehicle, the mass offset creates a trim angle-of-attack to generate modest flight path corrections. The control system must maintain the desired position of each mass in the face of large disturbances. A novel algorithm for determining the desired mass positions is developed in conjunction with a preliminary controller design. The controller design is based on classical frequency domain techniques where a bound on the disturbance magnitude is used to formulate the disturbance rejection problem. Simulation results for the controller are presented for a typical reentry vehicle.

More Details

Summary of field operations, well TRN-1

Fritts, J.E.; Thomas, E.; Mccord, J.P.

TRN-1 was drilled near the SE corner of Kirtland Air Force Base to a depth of 510 feet. This well is in the Site-Wide Hydrogeologic Characterization task field program, which is part of Sandia`s Environmental Restoration Project. After drilling, the borehole was logged, plugged to a depth of 352 ft, and completed as a monitoring well. Sand pack interval is from 305 to 352 ft and the screen interval is from 320 to 340 ft. During field operations, important subsurface geologic and hydrologic data were obtained (drill cuttings, geophysical logs of alluvial cover). Identification of the Abo formation in the subsurface will be useful. The subsurface hydrologic data will help define the local hydrostratigraphic framework within the bedrock. Future aquifer testing will be conducted for transmissivity, etc.

More Details

Aqueous precipitation: Population balance modeling and control in multi-cation systems

Voigt, James A.

Efficient separation of metal species from aqueous streams by precipitation techniques requires a fundamental understanding of the processes that occur during precipitation. These processes include particle nucleation, particle growth by solute deposition, agglomerate formation, and agglomerate breakup. Population balance method has been used to develop a kinetic model that accounts for these competing kinetic processes. The usefulness of the model is illustrated through its application to precipitation of yttrium hydroxynitrate, YHN. Kinetic parameters calculated from the model equations and system-specific solution chemistry are used to describe several aspects of the effect of pH on YHN precipitation. Implications for simultaneous precipitation of more than one cation type are discussed with examples. Effects of solution chemistry, precipitator design, and solvent choice are considered.

More Details

Techniques for active embodiment of participants in virtual environments

Stansfield, S.

This paper presents preliminary work in the development of an avatar driver. An avatar is the graphical embodiment of a user in a virtual world. In applications such as small team, close quarters training and mission planning and rehearsal, it is important that the user`s avatar reproduce his or her motions naturally and with high fidelity. This paper presents a set of special purpose algorithms for driving the motion of the avatar with minimal information about the posture and position of the user. These algorithms utilize information about natural human motion and posture to produce solutions quickly and accurately without the need for complex general-purpose kinematics algorithms. Several examples illustrating the successful applications of these techniques are included.

More Details

Constructing computer virus phylogenies

Phillips, Cynthia A.

There has been much recent algorithmic work on the problem of reconstructing the evolutionary history of biological species. Computer virus specialists are interested in finding the evolutionary history of computer viruses--a virus is often written using code fragments from one or more other viruses, which are its immediate ancestors. A phylogeny for a collection of computer viruses is a directed acyclic graph whose nodes are the viruses and whose edges map ancestors to descendants and satisfy the property that each code fragment is ``invented`` only once. To provide a simple explanation for the data, we consider the problem of constructing such a phylogeny with a minimal number of edges. In general, this optimization problem cannot be solved in quasi-polynomial time unless NQP=QP; we present positive and negative results for associated approximated problems. When tree solutions exist, they can be constructed and randomly sampled in polynomial time.

More Details

Evolution of structure during phase transitions

Martin, James E.

Nanostructured materials can be synthesized by utilizing the domain growth that accompanies first-order phase separation. Structural control can be achieved by appropriately selecting the quench depth and the quench time, but in order to do this in a mindful fashion one must understand the kinetics of domain growth. The authors have completed detailed light scattering studies of the evolution of structure in both temperature- and field-quenched phase transitions in two and three dimensional systems. They have studied these systems in the quiescent state and in shear and have developed theoretical models that account for the experimental results.

More Details

Accuracy considerations for implementing velocity boundary condiditons in vorticity formulations

Kempka, Steven N.

A vorticity formulation is described that satisfies the velocity boundary conditions for the incompressible Navier-Stokes equations. Velocity boundary conditions are satisfied by determining the appropriate vortex sheets that must be created on the boundary. Typically, the vortex sheet strengths are determined by solving a set of linear equations that is over-specified. The over-specification arises because an integral constraint on the vortex sheets is imposed. Vortex sheets determined this way do not accurately satisfy both components of the velocity boundary conditions because over-specified systems do not have unique solutions. An integral collocation technique is applied to a generalized Helmholtz decomposition. This formulation implicitly satisfies an integral constraint that is more general that constraints typically used. Improvements in satisfying velocity boundary conditions are shown.

More Details

Comprehensive test ban treaty international monitoring system security threats and proposed security attributes

Craft, R.L.

To monitor compliance with a Comprehensive Test Ban Treaty (CTBT), a sensing network, referred to as the International Monitoring System (IMS), is being deployed. Success of the IMS depends on both its ability to preform its function and the international community`s confidence in the system. To ensure these goals, steps must be taken to secure the system against attacks that would undermine it; however, it is not clear that consensus exists with respect to the security requirements that should be levied on the IMS design. In addition, CTBT has not clearly articulated what threats it wishes to address. This paper proposes four system-level threats that should drive IMS design considerations, identifies potential threat agents, and collects into one place the security requirements that have been suggested by various elements of the IMS community. For each such requirement, issues associated with the requirement are identified and rationale for the requirement is discussed.

More Details

Pressure effects on bubble-column flow characteristics

Adkins, Douglas R.

Bubble-column reactors are used in the chemical processing industry for two-phase and three-phase chemical reactions. Hydrodynamic effects must be considered when attempting to scale these reactors to sizes of industrial interest, and diagnostics are needed to acquire data for the validation of multiphase scaling predictions. This paper discusses the use of differential pressure (DP) and gamma- densitometry tomography (GDT) measurements to ascertain the gas distribution in a two-phase bubble column reactor. Tests were performed on an industrial scale reactor (3-m tall, 0.48-m inside diameter) using a 5-Curie cesium-137 source with a sodium-iodide scintillation detector. GDT results provide information on the time- averaged cross-sectional distribution of gas in the liquid, and DP measurements provide information on the time and volume averaged axial distribution of gas. Close agreement was observed between the two methods of measuring the gas distribution in the bubble column. The results clearly show that, for a fixed volumetric flowrate through the reactor, increasing the system pressure leads to an increase in the gas volume fraction or ``gas holdup`` in the liquid. It is also shown from this work that GDT can provide useful diagnostic information on industrial scale bubble-column reactors.

More Details

Pressure driven particulate flows

Mondy, Lisa A.

Numerical simulations of pressure-driven particulate Stokes flows are performed in cylindrical and rectangular conduits using a parallel boundary element code. Spherical particles are randomly placed in the conduits and a pressure drop between the ends of the conduits is imposed by the boundary conditions to induce a Poiseuille-like flow field. The instantaneous velocities of the particles are then calculated, as well as the additional pressure drop necessary to maintain a constant flow rate. Because the results depend on the spatial distribution of the particles, several random configurations of particles are examined for each case. Depending on two different interpretations of the numerical results, the solid phase can be represented as either leading or lagging the fluid phase. Both of the analyses and interpretations are presented.

More Details

A study of detonation timing and fragmentation using 3-D finite element techniques and a damage constitutive model

Preece, Dale S.

The transient dynamics finite element computer program, PRONTO-3D, has been used in conjunction with a damage constitutive model to study the influence of detonation timing on rock fragmentation during blasting. The primary motivation of this study is to investigate the effectiveness of precise detonators in improving fragmentation. PRONTO-3D simulations show that a delay time of 0.0 sec between adjacent blastholes results in significantly more fragmentation than a 0.5 ms delay.

More Details

Probabilistic risk assessment for the Sandia National Laboratories Technical Area V Liquid Waste Disposal System surface impoundments

Dawson, Lon A.

A probabilistic risk assessment was completed for a former radioactive waste disposal site. The site, two unlined surface impoundment, was designed as part of the Liquid Waste Disposal System (LWDS) to receive radioactive effluent from nuclear reactors in Technical Area-V (TA-V) at Sandia National Laboratories/New Mexico (SNL/NM). First, a statistical comparison of site sampling results to natural background, using EPA methods, and a spatial distribution analysis were performed. Risk assessment was conducted with SNL/NM`s Probabilistic Risk Evaluation and Characterization Investigation System model. The risk assessment indicated that contamination from several constituents might have been high enough to require remediation. However, further analysis based on expected site closure activities and recent EPA guidance indicated that No Further Action was acceptable.

More Details

Hydraulic testing around Room Q: Evaluation of the effects of mining on the hydraulic properties of Salado Evaporites

Beauheim, Richard L.

Room Q is a 109-m-long cylindrical excavation in the Salado Formation at the Waste Isolation Pilot Plant (WIPP) site. Fifteen boreholes were drilled and instrumented around Room Q so that tests could be conducted to determine the effects of room excavation on the hydraulic properties of the surrounding evaporate rocks. Pressure-buildup and pressure-pulse tests were conducted in all of the boreholes before Room Q was mined. The data sets from only eight of the boreholes are adequate for parameter estimation, and five of those are of poor quality. Constant-pressure flow tests and pressure-buildup tests were conducted after Room Q was mined, producing eleven interpretable data sets, including two of poor quality. Pre-mining transmissivities interpreted from the three good-quality data sets ranged from 1 x 10{sup -15} to 5 x 10{sup -14} m{sup 2}/s (permeability-thickness products of 2 x 10{sup -22} to 9 x 10{sup -21} m{sup 3}) for test intervals ranging in length from 0.85 to 1.37 m. Pre-mining average permeabilities, which can be considered representative of undisturbed, far-field conditions, were 6 x 10{sup -20} and 8 x 10{sup -20} m{sup 2} for anhydrite, and 3 x 10{sup -22} m{sup 2} for halite. Post-mining transmissivities interpreted from the good-quality data sets ranged from 1 x 10{sup -16} to 3 x 10{sup -13} m{sup 2}/s (permeability-thickness products of 2 x 10{sup -23} to 5 x 10{sup -20} m{sup 3}). Post-mining average permeabilities for anhydrite ranged from 8 x 10{sup -20} to 1 x 10{sup -19} m{sup 2}. The changes in hydraulic properties and pore pressures that were observed can be attributed to one or a combination of three processes: stress reduction, changes in pore connectivity, and flow towards Room Q. The effects of the three processes cannot be individually quantified with the available data.

More Details

First measurements of the ion energy distribution at the divertor strike point during DIII-D disruptions

Wampler, William R.

Plasma disruptions are a serious concern in tokamak design because of the high impulsive heat loads which can cause strong erosion of divertor materials due to enhanced sputtering, or melting/ablation in the most severe cases. Predictions of net erosion rates and hence component lifetimes are very difficult and are highly dependent on the plasma conditions over the divertor target. It is therefore necessary to characterize the properties of the scrape-off plasma near the divertor target plate under these special conditions. Here, plasma/wall interaction studies are being carried out using the Divertor Materials Exposure System (DiMES) on DIII-D. The objective of the experiment is to determine the kinetic energy and flux of deuterium ions reaching the divertor target during argon-induced radiative disruptions. The experiment utilizes a special slotted ion analyzer mounted over a Si sample to collect the fast charge-exchange (CX) deuterium neutrals emitted within the recycled cold neutral layer (CNL) which serves as a CX target for the incident ions. A theoretical interpretation of the experiment reveals a strong forward pitch-angle dependence in the approaching ion distribution function. The depth distribution of the trapped D in the Si sample was measured using low-energy direct recoil spectroscopy. Comparison with the TRIM code using monoenergetic ions indicated that the best fit to the data was obtained for an ion energy of 100 eV. An estimate of the CNL thickness {integral}nd{ell} indicates that during disruptions the CNL cushion is thick enough to reduce the local ion heat load by {approximately}30% due to CX refluxing.

More Details
Results 96676–96700 of 100,993
Results 96676–96700 of 100,993
Top