We describe a dynamic load-balancing strategy for parallel finite element methods with adaptive mesh (h-) and order (p-) refinement. The load-balancing algorithm is based on the tiling load-balancing system, where global balance in achieved by performing local balancing within overlapping neighborhoods of processors. Tiling is applied to each mesh level created by the adaptive h-refinement. Weights are used in the migration routines to reflect the nonuniform elemental work loads caused by adaptive p-refinement. The combination of adaptive refinement and tiling significantly reduces total execution time relative to fixed-mesh, fixed-order methods yielding comparable accuracy, as we demonstrate with experiments on an nCUBE/2.
Failure analysis is a critical element in the integrated circuit manufacturing industry. This paper reviews the changing role of failure analysis and describes major techniques employed in the industry today. Several advanced failure analysis techniques that meet the challenges imposed by advancements in integrated circuit technology are described and their applications are discussed. Future trends in failure analysis needed to keep pace with the continuing advancements in integrated circuit technology are anticipated.
Formation of Fe clusters in inverse micelles was studied. Iron salts are solubilized within the polar interior of inverse micelles, and addition of LiBH{sub 4} initiates reduction to produce monodisperse, nanometer-sized Fe based particles. The reaction sequence is sustained by material exchange between inverse micelles. Surfactant interface provides a spatial constraint on reaction volume, and reactions carried out in these micro-heterogeneous solutions produce colloidal sized particles (10--100 {Angstrom}) stabilized in solution against flocculation by surfactant. In this paper, the clusters were characterized using TEM, Moessbauer spectroscopy, electron diffraction, and x-ray photoelectron spectroscopy.
A technology demonstration that optimizes sampling strategies and real-time data collection was carried out at the Kirtland Air Force Base RB-11 Radioactive Burial Site, Albuquerque, New Mexico in August 1994. The project, which was funded by the Strategic Environmental Research and Development Program (SERDP), involved the application of a geostatistical-based {open_quotes}smart sampling{close_quotes} methodology and software with on-site field screening of soils for radiation, organic compounds and metals. The software, known as Plume{trademark}, was developed at Argonne National Laboratory as part of the DOE/OTD-funded Mixed Waste Landfill Integrated Demonstration (MWLID). The objective of the investigation was to compare an innovative Adaptive Sampling approach that stressed real-time decision-making with a conventional RCRA-driven site characterization carried out by the Air Force. The latter investigation used a standard drilling and sampling plan as mandated by the EPA. To make the comparison realistic, the same contractors and sampling equipment (Geoprobe{reg_sign} soil samplers) were used. In both investigations, soil samples were collected at several depths at numerous locations adjacent to burial trenches that contain low-level radioactive waste and animal carcasses. Neither study revealed the presence of contaminants appreciably above risk based action levels, indicating that minimal to no migration has occurred away from the trenches. The combination of Adaptive Sampling with field screening achieved a similar level of confidence compared to the RCRA investigation regarding the potential migration of contaminants at the site. By comparison, the Adaptive Sampling program drilled 28 locations (vs. 36 for the conventional investigation), collected 81 samples (vs. 163), and sent 15 samples (vs. 163) off-site for laboratory analysis. In addition, the field work took 3 1/2 days compared to 13 days for the RCRA investigation.
The A-primed (Agile Product Realization of Innovative electro-Mechanical Devices) project is defining and proving processes for agile product realization for the Department of Energy complex. Like other agile production efforts reported in the literature, A-primed uses concurrent engineering and information automation technologies to enhance information transfer. A unique aspect of our approach to agility is the qualification during development of a family of related product designs and their production processes, rather than a single design and its attendant processes. Applying engineering principles and statistical design of experiments, economies of test and analytic effort are realized for the qualification of the device family as a whole. Thus the need is minimized for test and analysis to qualify future devices from this family, thereby further reducing the design-to-production cycle time. As a measure of the success of the A-primed approach, the first design took 24 days to produce, and operated correctly on the first attempt. A flow diagram for the qualification process is presented. Guidelines are given for implementation, based on the authors experiences as members of the A-primed qualification team.
A method has been formulated and tested to provide laser weld schedules using a mathematical model and parameter optimization. This effort, on behalf of the Smartweld manufacturing initiative, seeks to provide: (1) laser power, (2) part travel speed, and (3) lens focal length to optimize weld process efficiency while constraining weld dimensions. Experimental data for three metals was fit to provide the mathematical model. Embedded material constants in the computational model allowed the extension to seven metals. A genetic algorithm, was used to accomplish the optimization. Lens focal length is a discrete variable and necessitated this type of algorithm. All coding was done in MATLAB and a graphical user interface was provided. Contour and surface plots, available through the interface, provide the analyst with insight as to optimum welds which are reachable within the problem-specified bounds on power, speed, and available focal lengths.
This paper is a presentation made in support of the statistics profession. This field can say it has had a major impact in most major fields of study presently undertaken by man, yet it is not perceived as an important, or critical field of study. It is not a growth field either, witness the almost level number of faculty and new PhD`s produced over the past twenty years. The author argues the profession must do a better job of selling itself to the students it educates. Awaken them to the impact of statistics in their lives and their business worlds, so that they see beyond the formulae to the application of these principles.
The System Surety Assessment Department 12332 of Sandia National Laboratories performed an independent nuclear safety assessment of the Non-nuclear Verification Instrument NNV-470AS. The NNV-470AS was assessed for structural integrity, characteristics of its electrical circuits, and its Radiated Electrical Emissions. Department 12332 concluded that the NNV-470AS and its Operational Procedures are safe to use with war reserve weapons. However, strict adherence to the Operational Procedures for the NNV-470AS is needed to prevent tampering with the instrument.
This document is a compilation of the Field Work Proposals (FWP) for the DOE BES Materials Sciences Program. The program is directed toward Scientifically Tailored Materials, specifically for energy applications.
MACCS was developed at Sandia National Laboratories (SNL) under U.S. Nuclear Regulatory Commission (NRC) sponsorship to estimate the offsite consequences of potential severe accidents at nuclear power plants (NPPs). MACCS was publicly released in 1990. MACCS was developed to support the NRC`s probabilistic safety assessment (PSA) efforts. PSA techniques can provide a measure of the risk of reactor operation. PSAs are generally divided into three levels. Level one efforts identify potential plant damage states that lead to core damage and the associated probabilities, level two models damage progression and containment strength for establishing fission-product release categories, and level three efforts evaluate potential off-site consequences of radiological releases and the probabilities associated with the consequences. MACCS was designed as a tool for level three PSA analysis. MACCS performs probabilistic health and economic consequence assessments of hypothetical accidental releases of radioactive material from NPPs. MACCS includes models for atmospheric dispersion and transport, wet and dry deposition, the probabilistic treatment of meteorology, environmental transfer, countermeasure strategies, dosimetry, health effects, and economic impacts. The computer systems MACCS is designed to run on are the 386/486 PC, VAX/VMS, E3M RISC S/6000, Sun SPARC, and Cray UNICOS. This paper provides an overview of MACCS, reviews some of the applications of MACCS, international collaborations which have involved MACCS, current developmental efforts, and future directions.
We present three codes for the Intel Paragon that address the problem of three-dimensional seismic imaging of complex geologies. The first code models acoustic wave propagation and can be used to generate data sets to calibrate and validate seismic imaging codes. This code reported the fastest timings for acoustic wave propagation codes at a recent SEG (Society of Exploration Geophysicists) meeting. The second code implements a Kirchhoff method for pre-stack depth migration. Development of this code is almost complete, and preliminary results are presented. The third code implements a wave equation approach to seismic migration and is a Paragon implementation of a code from the ARCO Seismic Benchmark Suite.
We have developed a new intracavity laser technique that uses a living or a fixed cell as an integral component of the laser. The cells are placed on an AlGaAs/GaAs surface-emitting semiconductor wafer and covered with a glass dielectric mirror to form a laser resonator. In this arrangement, the cells serve as optical waveguides (or lens elements) to confine (or focus) light generated in the resonator by the semiconductor. Because of the high transparency, the cells aid the lasing process to generate laser light. This ultra sensitive laser provides a novel imaging/spectroscopic technique for histologic examination which we demonstrate with normal and sickled human red blood cells. Extremely high contrast microscopic images of the cells are observed near 830-850 nm. These images correspond to electromagnetic modes of cell structures and are sensitive to shape of the cell. Using a high resolution spectrometer, we resolve the light emitted from these images into very narrow spectral peaks associated with the lasing modes. Analysis of the spectra reveals that the distribution of peaks is quite different for normal and sickled red blood cells. This technique, in a more developed form, may be useful for the rapid analysis of other kinds of normal and abnormal cells.
In 1992, a sinkhole was discovered above a Strategic Petroleum Reserve storage facility at Weeks Island, Louisiana. The oil is stored in an old salt mine located within a salt dome. In order to assess the hydrologic significance of the sink hole, an In Situ Permeable Flow Sensor was deployed within a sand-filled conduit in the salt dome directly beneath the sinkhole. The flow sensor is a recently developed instrument which uses a thermal perturbation technique to measure the magnitude and direction of the full 3-dimensional groundwater flow velocity vector in saturated, permeable materials. The flow sensor measured substantial groundwater flow directed vertically downward into the salt dome. The data obtained with the flow sensor provided critical evidence which was instrumental in assessing the significance of the sinkhole in terms of the integrity of the oil storage facility.
The World Wide Web provides a unified method of access to various information services on the Internet via a variety of protocols. Mosaic and other browsers give users a graphical interface to the Web that is easier to use and more visually pleasing than any other common Internet information service today. The availability of information via the Web and the number of users accessing it have both grown rapidly in the last year. The interest and investment of commercial firms in this technology suggest that in the near future, access to the Web may become as necessary to doing business as a telephone. This is problematical for organizations that use firewalls to protect their internal networks from the Internet. Allowing all the protocols and types of information found in the Web to pass their firewall will certainly increase the risk of attack by hackers on the Internet. But not allowing access to the Web could be even more dangerous, as frustrated users of the internal network are either unable to do their jobs, or find creative new ways to get around the firewall. The solution to this dilemma adopted at Sandia National Laboratories is described. Discussion also covers risks of accessing the Web, design alternatives considered, and trade-offs used to find the proper balance between access and protection.
Sandia is a multiprogram engineering and science laboratory operated for the Department of Energy with major facilities at Albuquerque, New Mexico, and Livermore, California, and a test range near Tonapah, Nevada. It has major research and development responsibilities for nuclear weapons, arms control, energy, the environment, economic competitiveness, and other areas of importance to the needs of the nation. The principal mission is to support national defense policies by ensuring that the nuclear weapon stockpile meets the highest standards of safety, reliability, security, use control, and military performance. This publication gives a brief overview of the multifaceted research programs conducted by the laboratory.
The SANdia total-DOSe Estimator (SANDOSE) is used to estimate total radiation dose to a (BRL-CAT) solid model, SANDOSE uses the mass-sectoring technique to sample the model using ray-tracing techniques. The code is integrated directly into the BRL-CAD solid model editor and is operated using a simple graphical user interface. Several diagnostic tools are available to allow the user to analyze the results. Based on limited validation using several benchmark problems, results can be expected to fall between a 10% underestimate and a factor of 2 overestimate of the actual dose predicted by rigorous radiation transport techniques. However, other situations may be encountered where the results might fall outside of this range. The code is written in C and uses X-windows graphics. It presently runs on SUN SPARCstations, but in theory could be ported to any workstation with a C compiler and X-windows. SANDOSE is available via license by contacting either the Sandia National Laboratories Technology Transfer Center or the author.
The Environmental Restoration (ER) Project at Sandia National Laboratories, New Mexico is managing the project to assess and, when necessary, to remediate sites contaminated by the lab operations. Within the ER project, the site-wide hydrogeologic characterization task is responsible for the area-wide hydrogeologic investigation. The purpose of this task is to reduce the uncertainty about the rate and direction of groundwater flow beneath the area and across its boundaries. This specific report deals with the installation of PGS-1 monitoring well which provides information on the lithology and hydrology of the aquifer in the northern area of the Kirtland Air Force Base. The report provides information on the well design; surface geology; stratigraphy; structure; drilling, completion, and development techniques; and borehole geophysics information.
This assessment studied the performance of high-level radioactive waste and spent nuclear fuel in a hypothetical repository in unsaturated tuff. The results of this 10-month study are intended to help guide the Office of Environment Management of the US Department of Energy (DOE) on how to prepare its wastes for eventual permanent disposal. The waste forms comprised spent fuel and high-level waste currently stored at the Idaho National Engineering Laboratory (INEL) and the Hanford reservation. About 700 metric tons heavy metal (MTHM) of the waste under study is stored at INEL, including graphite spent nuclear fuel, highly enriched uranium spent fuel, low enriched uranium spent fuel, and calcined high-level waste. About 2100 MTHM of weapons production fuel, currently stored on the Hanford reservation, was also included. The behavior of the waste was analyzed by waste form and also as a group of waste forms in the hypothetical tuff repository. When the waste forms were studied together, the repository was assumed also to contain about 9200 MTHM high-level waste in borosilicate glass from three DOE sites. The addition of the borosilicate glass, which has already been proposed as a final waste form, brought the total to about 12,000 MTHM.
A remediation of a gas cylinder disposal pit at Sandia National Laboratories, New Mexico has recently been completed. The cleanup prevented possible spontaneous releases of hazardous gases from corroded cylinders that may have affected nearby active test areas at Sandia`s Technical Area III. Special waste management, safety, and quality plans were developed and strictly implemented for this project. The project was conceived from a waste management perspective, and waste minimization and management were built into the planning and implementation phases. The site layout was planned to accommodate light and heavy equipment, storage of large quantities of suspect soil, and special areas to stage and treat gases and reactive chemicals removed from the pit, as well as radiation protection areas. Excavation was a tightly controlled activity using experienced gas cylinder and reactive chemical specialists. Hazardous operations were conducted at night under lights, to allow nearby daytime operations to function unhindered. The quality assurance plan provided specific control of, and documentation for, critical decisions, as well as the record of daily operations. Both hand and heavy equipment excavation techniques were utilized. Hand excavation techniques were utilized. Hand excavation techniques allows sealed glass containers to be exhumed unharmed. In the end, several dozen thermal batteries; 5 pounds (2.3 kg) of lithium metal; 6.6 pounds (3.0 kg) of rubidium metal; several kilograms of unknown chemicals; 140 cubic yards (107 cubic meters) of thorium-contaminated soil; 270 cubic yards (205 cubic meters) of chromium-contaminated soil; and 450 gas cylinders, including 97 intact cylinders containing inert, flammable, toxic, corrosive, or oxidizing gases were removed and effectively managed to minimize waste.
Lithium ion systems, although relatively new, have attracted much interest worldwide. Their high energy density, long cycle life and relative safety, compared with metallic lithium rechargeable systems, make them prime candidates for powering portable electronic equipment. Although lithium ion cells are presently used in a few consumer devices, e.g., portable phones, camcorders, and laptop computers, there is room for considerable improvement in their performance. Specific areas that need to be addressed include: (1) carbon anode--increase reversible capacity, and minimize passivation; (2) cathode--extend cycle life, improve rate capability, and increase capacity. There are several programs ongoing at Sandia National Laboratories which are investigating means of achieving the stated objectives in these specific areas. This paper will review these programs.
The System Surety Assessment Department 12332 of Sandia National Laboratories performed an independent nuclear safety assessment of the Non-nuclear Verification Instrument T562. The T562 was assessed for structural integrity, characteristics of its electrical circuits, and its Radiated Electrical Emissions. Department 12332 concluded that the T562 and its Operational Procedures are safe to use with war reserve weapons. However, strict adherence to the Operational Procedures for the T562 is needed to prevent tampering with the instrument.
This report is a basic data report for field operations associated with the drilling, logging, completion, and development of Tijeras Arroyo well TJA-2. This test/monitoring well was installed as part of Sandia National Laboratories, New Mexico, Environmental Restoration Project.
We have demonstrated for the first time high frequency (210 MHz) oxide breakdown at the wafer-level using on-chip, self-stressing test structures. This is the highest frequency oxide breakdown that has been reported. We used these structures to characterize the variation in oxide breakdown with frequency (from 1 Hz to over 200 MHz) and duty cycle (from 10% to 90%). Since the stress frequency, duty cycle and temperature are controlled by DC signals in these structures, we used conventional DC wafer-level equipment without any special modifications (such as high frequency cabling). This self-stressing structure significantly reduces the cost of performing realistic high frequency oxide breakdown experiments necessary for developing reliability models and building-in-reliability.
Dextor`s Hysol EA-9394 is a room temperature curable paste adhesive representative of the adhesives used in wind turbine blade joints. A mechanical testing program has been performed to characterize this adhesive. Tension, compression stress relaxation, flexural, butt tensile, and fracture toughness test results are reported.
Advances of computer hardware and communication software have made it possible to perform parallel-processing computing on a collection of desktop workstations. For many applications, multitasking on a cluster of high-performance workstations has achieved performance comparable or better than that on a traditional supercomputer. From the point of view of cost-effectiveness, it also allows users to exploit available but unused computational resources, and thus achieve a higher performance-to-cost ratio. Monte Carlo calculations are inherently parallelizable because the individual particle trajectories can be generated independently with minimum need for interprocessor communication. Furthermore, the number of particle histories that can be generated in a given amount of wall-clock time is nearly proportional to the number of processors in the cluster. This is an important fact because the inherent statistical uncertainty in any Monte Carlo result decreases as the number of histories increases. For these reasons, researchers have expended considerable effort to take advantage of different parallel architectures for a variety of Monte Carlo radiation transport codes, often with excellent results. The initial interest in this work was sparked by the multitasking capability of MCNP on a cluster of workstations using the Parallel Virtual Machine (PVM) software. On a 16-machine IBM RS/6000 cluster, it has been demonstrated that MCNP runs ten times as fast as on a single-processor CRAY YMP. In this paper, we summarize the implementation of a similar multitasking capability for the coupled electron/photon transport code system, the Integrated TIGER Series (ITS), and the evaluation of two load balancing schemes for homogeneous and heterogeneous networks.
