The Virtual Collaborative Environment (VCE) and Distributed Collaborative Workbench (DCW) are new technologies that make it possible for diverse users to synthesize and share mechatronic, sensor, and information resources. Using these technologies, university researchers, manufacturers, design firms, and others can directly access and reconfigure systems located throughout the world. The architecture for implementing VCE and DCW has been developed based on the proposed National Information Infrastructure or Information Highway and a tool kit of Sandia-developed software. Further enhancements to the VCE and DCW technologies will facilitate access to other mechatronic resources. This report describes characteristics of VCE and DCW and also includes background information about the evolution of these technologies.
The authors developed and implemented a highly parallel computational algorithm for solution of the inverse scattering problem generated when an integrated circuit is illuminated by laser. The method was used as part of a system to measure diffraction grating line widths on specially fabricated test wafers and the results of the computational analysis were compared with more traditional line-width measurement techniques. The authors found they were able to measure the line width of singly periodic and doubly periodic diffraction gratings (i.e. 2D and 3D gratings respectively) with accuracy comparable to the best available experimental techniques. They demonstrated that their parallel code is highly scalable, achieving a scaled parallel efficiency of 90% or more on typical problems running on 1024 processors. They also made substantial improvements to the algorithmics and their original implementation of Rigorous Coupled Waveform Analysis, the underlying computational technique. These resulted in computational speed-ups of two orders of magnitude in some test problems. By combining these algorithmic improvements with parallelism the authors achieve speedups of between a few thousand and hundreds of thousands over the original engineering code. This made the laser diffraction measurement technique practical.
This report presents a microsimulation model of a transition economy. Transition is defined as the process of moving from a state-enterprise economy to a market economy. The emphasis is on growing a market economy starting from basic microprinciples. The model described in this report extends and modifies the capabilities of Aspen, a new agent-based model that is being developed at Sandia National Laboratories on a massively parallel Paragon computer. Aspen is significantly different from traditional models of the economy. Aspen`s emphasis on disequilibrium growth paths, its analysis based on evolution and emergent behavior rather than on a mechanistic view of society, and its use of learning algorithms to simulate the behavior of some agents rather than an assumption of perfect rationality make this model well-suited for analyzing economic variables of interest from transition economies. Preliminary results from several runs of the model are included.
A Monte Carlo algorithm is used to determine the apparent spatial blurring of a terrestrial 1.07 micron optical point source due to cloud scattering as seen from space. The virtual image of a point source over a virtual source plane area 22.4 x 22.4 square kilometers arising from cloud scattering was determined for stratus clouds (NASA cloud number 5) and altostratus clouds optical source arises from photon scattering by cloud water droplets. Displacement of the virtual source is due to the apparent illumination of the cloud top region directly about the actual source which when viewed at a nonzero look angle gives a projected displacement of the apparent source relative to the actual source. These features are quantified by an analysis of the Monte Carlo computational results.
Unlike silicon microelectronics, photonics packaging has proven to be low yield and expensive. One approach to make photonics packaging practical for low cost applications is the use of {open_quotes}smart{close_quotes} packages. {open_quotes}Smart{close_quotes} in this context means the ability of the package to actuate a mechanical change based on either a measurement taken by the package itself or by an input signal based on an external measurement. One avenue of smart photonics packaging, the use of polysilicon micromechanical devices integrated with photonic waveguides, was investigated in this research (LDRD 3505.340). The integration of optical components with polysilicon surface micromechanical actuation mechanisms shows significant promise for signal switching, fiber alignment, and optical sensing applications. The optical and stress properties of the oxides and nitrides considered for optical waveguides and how they are integrated with micromechanical devices were investigated.
This report describes the design features of series connected photovoltaic arrays which will be required to charge capacitors to relatively high (400V) voltages in time periods on the order of 1 microsecond. The factors which determine the array voltage and the capacitor charge time are given. Individual element junction designs, along with an interconnect scheme, and a semiconductor process to realize them are presented. Finally, the input laser optical required to meet the requirements is determined.
The response of a variety of sucker rod couplings to an applied axial load was simulated using axisymmetric finite element models. The calculations investigated three sucker rod sizes and various combinations of the slimhole, Spiralock, and Flexbar modifications to the coupling. In addition, the effect of various make-ups (assembly tightness) on the performance of coupling was investigated. An axial load was applied to the sucker rod ranging from {minus}5 ksi to 40 ksi, encompassing three load cycles identified on a modified Goodman diagram as acceptable for indefinite service life of the sucker rods. The simulations of the various coupling geometries and make-ups were evaluated with respect to how well they accomplish the two primary objectives of preloading threaded couplings: (1) to lock the threaded coupling together so that it will not loosen and eventually uncouple, and (2) to improve the fatigue resistance of the threaded connection by reducing the stress amplitude in the coupling when subjected to cyclic loading. Perhaps the most significant finding in this study was the characterization of the coupling parameters which affect two stress measures. The mean hydrostatic stress, which determines the permissible effective alternating stress, is a function of the coupling make-up. Whereas, the alternating effective stress is a function of the relative stiffnesses of the pin and box sections of the coupling and, as long as the coupling does not separate, is unaffected by the amount of circumferential displacement applied during make-up. The results of this study suggest approaches for improving the fatigue resistance of sucker rod couplings.
Experimental results are presented for 24 thermal expansion experiments performed on 5 welded specimens of the Paintbrush tuff recovered from borehole USW SD-12 at Yucca Mountain, Nevada. The thermal expansion experiments were performed at constant confining pressures between 1 and 30 MPa. On three specimens, the highest confining pressure measurements were performed first to inhibit thermally induced damage which might occur at lower confining pressures. At each confining pressure two complete thermal cycles were performed. The specimens were heated (to a nominal temperature of 250 C) and cooled at the nominal rate of 0.319 C per minute. The change in specimen length as a function of temperature was measured with two linear variable displacement transducers mounted on endcaps secured to the specimen. The strain increases with increasing temperature and the strain vs temperature curves are concave upward. On cooling, there is hysteresis at the higher temperatures at all confining pressures. The first heating/cooling cycle is anomalous; hysteresis is pronounced, and a permanent shortening of the specimen is observed at the termination of the cycle. The magnitude of the effect was similar for all five specimens regardless of whether the first cycle was carried out at the highest or lowest confining pressure. For subsequent cycles at all confining pressures, no permanent strain develops, and the strain versus temperature curves re very similar. The mean coefficients of thermal expansion ({alpha}) range from 7.9 to 10.8{sup {minus}6} C{sup {minus}1} at temperatures below 100 C, to 14.2 to 20.6 x 10{sup {minus}6} C{sup {minus}1} at temperatures approaching 250 C. The effect of confining pressure on thermal expansion is small. For temperatures above 175 C, the mean coefficients of thermal expansion decreases by 10--12% as the pressure increases from 1 to 30 MPa.
Shipboard fires both in the same ship hold and in an adjacent hold aboard a break-bulk cargo ship are simulated with a commercial finite-volume computational fluid mechanics code. The fire models and modeling techniques are described and discussed. Temperatures and heat fluxes to a simulated materials package are calculated and compared to experimental values. The overall accuracy of the calculations is assessed.
This report documents a preliminary evaluation of the ability of the greater confinement disposal boreholes at the Nevada Test Site to provide long-term isolation of radionuclides from the disposal of vitrified byproduct material. The byproduct material is essentially concentrated residue from processing uranium ore that contains a complex mixture of radionuclides, many of which are long-lived and present in concentrations greater than 100,000 picoCuries per gram. This material has been stored in three silos at the fernald Environmental Management Project since the early 1950s and will be vitrified into 6,000 yd{sup 3} (4,580 m{sup 3}) of glass gems prior to disposal. This report documents Sandia National Laboratories` preliminary evaluation for disposal of the byproduct material and includes: the selection of quantitative performance objectives; a conceptual model of the disposal system and the waste; results of the modeling; identified issues, and activities necessary to complete a full performance assessment.
The Alternative Landfill Cover Demonstration is a large scale field test that compares the performance of various landfill cover designs in dry environments. An important component of the comparison is the change in the moisture content of the soils throughout the different cover test plots. Time Domain Reflectometry (TDR) is the primary method for the measurement of the volumetric moisture content. Each of the covers is composed of layers of varying types and densities of soils. The probes are therefore calibrated to calculate the volumetric moisture content in each of the different soils in order to gain the optimum performance of the TDR system. The demonstration plots are constructed in two phases; a different probe is used in each phase. The probe that is used in Phase 1 is calibrated for the following soils: compacted native soil, uncompacted native soil, compacted native soil mixed with 6% sodium bentonite by weight, and sand. The probe that is used in Phase 2 is calibrated for the following soils: compacted native soil, uncompacted native soil, and sand. In addition, the probes are calibrated for the varying cable lengths of the TDR probes. The resulting empirically derived equations allow for the calculation of in-situ volumetric moisture content of all of the varying soils throughout the cover test plots in the demonstration.
The state-of-the-art in Lagrangian methods for the grid-free simulation of three-dimensional, incompressible, high Reynolds number, internal and/or external flows is surveyed. Specifically, vortex and velicity (or impulse) element methods are introduced. The relative merits of various available techniques and the outstanding challenges in simulating the processes of convection and diffusion, as well as in satisfying the wall boundary conditions are discussed individually. Issues regarding the stretch and solenoidality of vorticity are also discussed. A potentially successful algorithm for simulating the flow around a parachute is proposed as well.
A methodology for the evaluation of complex electromagnetics problems is presented. The methodology reduces the computational requirements for the analysis of large scale computational electromagnetics problems by hybridizing the method of moments and physical optics techniques. The target model is based on triangular facets and the incident field source by its system response function. Data which can be obtained from the analysis are radar cross section, power spectral density, and range profiles.
Surface-micromachined silicon inertial sensors are limited to relatively high-G applications in part because of the fundamental limitations on proof mass imposed by the manufacturing technology. At the same time, traditional micromolding technologies such as LIGA do not lend themselves to integration with electronics, a capability which is equally necessary for high-performance inertial sensors. The silicon micromolding processes described in this report promise to offer both larger proof masses and integrability with on-chip electronics. In Sandia`s silicon micromolding process, the proof mass is formed using a mold which is first recessed into the substrate using a deep silicon trench etch, then lined with a sacrificial or etch-stop layer, and filled with mechanical polysilicon. Since the mold is recessed into the substrate, the whole micromechanical structure can be formed, planarized, and integrated with standard silicon microelectronic circuits before the release etch. In addition, unlike surface-micromachined parts, the thickness of the molded parts is limited by the depth of the trench etch (typically 10--50 {micro}m) rather than the thickness of deposited polysilicon (typically 2 {micro}m). The fact that the high-aspect-ratio section of the device is embedded in the substrate enables the monolithic integration of high-aspect-ratio parts with surface-micromachined mechanical parts, and, in the future, also electronics. The authors anticipate that such an integrated mold/surface micromachining/electronics process will offer versatile high-aspect-ratio micromachined structures that can be batch-fabricated and monolithically integrated into complex microelectromechanical systems including high-performance inertial sensing systems.
Discharge capacitors were designed based on materials with antiferroelectric (AFE) to ferroelectric (FE) field enforced transitions that had 10 times the capacitance of relaxor ferroelectric or state of the art BaTiO{sub 3} materials in the voltage range of interest. Nonlinear RLC circuit analysis was used to show that the AFE to FE materials have potentially more than 2 times the peak discharge current density capability of the BaTiO{sub 3} or lead magnesium niobate (PMN) based relaxor materials. Both lead lanthanum zirconium tin titanate (PLZST) AFE to FE field enforced phase transition materials and PMN based relaxor materials were fabricated and characterized for Sandia`s pulse discharge capacitor applications. An outstanding feature of the PLZST materials is that there are high field regimes where the dielectric constant increases substantially, by a factor of 20 or more, with applied field. Specifically, these materials have a low field dielectric constant of 1,000, but an effective dielectric constant of 23,000 in the electric field range corresponding to the FE to AFE transition during discharge. Lead magnesium niobate (PMN) based relaxor materials were also investigated in this project because of their high dielectric constants. While the PMN based ceramics had a low field dielectric constant of 25,000, at a field corresponding to half the charging voltage, approximately 13 kV/cm, the dielectric constant decreases to approximately 7,500.
The flow behavior of liquid metals at solid interfaces is critically important to successful welding, brazing, soldering and the synthesis of metal/ceramic composites. Continuum flow models frequently fail to reliably predict wetting behavior because they are based upon bulk fluid properties, rather than microscopic flow processes at the actual solid/liquid interface. Improved understanding of interfacial liquid flow is hindered by the paucity of experimental measurements at this microscopic level. This report describes a new approach, Acoustic Wave Damping (AWD), to measuring viscoelastic properties of liquid metal layers in the nanometer thickness regime. The AWD experiment measures the frequency response of a quartz crystal microbalance in contact with a viscoelastic layer. An equivalent circuit model and continuum acoustic theory relate this electrical response to mechanical energy storage and dissipative loss. For viscoelastic layers of known thickness and density, a quantitative complex shear modulus can be determined from the AWD data. Studies of self-assembled monolayers (SAMs) demonstrate sensitivity to monolayer structure and bonding. Molecular dynamics simulations relate these atomistic properties to the ensemble response. AWD measurements of ultra-thin liquid indium layers reveal metastable undercooling for 10--50 nm thick indium layers. Continued refinement of the AWD technique and the addition of complementary interface characterization techniques will enable definitive studies of ultra-thin molten metals.
The on-site inspection provisions in many current and proposed arms control agreements require extensive preparation and training on the part of both the Inspection Teams (inspectors) and Inspected Parties (host). Current training techniques include table-top inspections and practice inspections. The Augmented Computer Exercise for Inspection Training (ACE-IT), an interactive computer training tool, increases the utility of table-top inspections. ACE-IT has been designed to provide training for challenge inspections under the Chemical Weapons Convention (CWC); however, this training tool can be modified for other inspection regimes. Although ACE-IT provides training from notification of an inspection through post-inspection activities, the primary emphasis of ACE-IT is in the inspection itself--particularly with the concept of managed access. ACE-IT also demonstrates how inspection provisions impact compliance determination and the protection of sensitive information. This User`s Guide describes the use of the ACE-IT training software.
The on-site inspection provisions in many current and proposed arms control agreements require extensive preparation and training on the part of both the Inspection Teams (inspectors) and Inspected Parties (host). Current training techniques include table-top inspections and practice inspections. The Augmented Computer Exercise for Inspection Training (ACE-IT), an interactive computer training tool, increases the utility of table-top inspections. ACE-IT has been designed to provide training for challenge inspections under the Chemical Weapons Convention (CWC); however, this training tool can be modified for other inspection regimes. Although ACE-IT provides training from notification of an inspection through post-inspection activities, the primary emphasis of ACE-IT is in the inspection itself--particularly with the concept of managed access. ACE-IT also demonstrates how inspection provisions impact compliance determination and the protection of sensitive information. This Technical Manual describes many of the technical aspects of the ACE-IT training software.
The on-site inspection provisions in many current and proposed arms control agreements require extensive preparation and training on the part of both the Inspected Party and the Inspection Team. Current training techniques include table-top inspections and practice inspections. The Augmented Computer Exercise for Inspection Training (ACE-IT), an interactive computer training tool, increases the utility of table-top inspections. ACE-IT has been designed to provide training for a hypothetical challenge inspection under the Chemical Weapons Convention (CWC); however, this training tool can be modified for other inspection regimes. Although ACE-IT provides training from notification of an inspection through post-inspection activities, the primary emphasis of ACE-IT is in the inspection itself--particularly with the concept of managed access. ACE-IT also demonstrates how inspection provisions impact compliance determination and the protection of sensitive information. The Exercise Manual supplements the ACE-IT software by providing general information on on-site inspections and detailed information for the CWC challenge inspection exercise. The detailed information includes the pre-inspection briefing, maps, list of sensitive items, medical records, and shipping records.
A novel technique has been developed for the synthesis of homogeneous, weakly agglomerated highly filterable Pb(Zr, Ti)O{sub 3} (PZT) powders. PZT 95/5 based ceramics were fabricated from these powders to determine interrelationships among microstructure, dielectric properties and pressure induced ferroelectric (FE) to antiferroelectric (AFE) phase transitions. Initial measurements indicate that microstructure has a substantial effect on hydrostatic depoling characteristics. While smaller grain size materials and higher switching pressures, subtleties in microstructure, which may include entrapped porosity, resulted in a more diffuse depoling characteristic. In addition, greater than 90% dense materials were obtained at process temperatures as low at 900{degrees}C. were only 30% of the values of PZT 95/5 fired at 1300{degrees}C, the dielectric constants of the 900{degrees}C materials were almost a factor of two higher. Backscattered electron Kikuchi pattern analysis determined that adjacent, nonlinear, irregularly shaped domain structures observed by electron channel imaging were 109{degrees} domains.
Specimens were tested from four thermal-mechanical units, namely Tiva Canyon (TCw), Paintbrush Tuff (PTn), and two Topopah Spring units (TSw1 and TSw2), and from two lithologies, i.e., welded devitrified (TCw, TSw1, TSw2) and nonwelded vitric tuff (PTn). Thermal conductivities in W(mk){sup {minus}1} averaged over all boreholes, ranged (depending upon temperature and saturation state) from 1.2 to 1.9 for TCw, from 0.4 to 0.9 for PTn, from 1.0 to 1.7 for TSw1, and from 1.5 to 2.3 for TSw2. Mean coefficients of thermal expansion were highly temperature dependent and values, averaged over all boreholes, ranged (depending upon temperature and saturation state) from 6.6 {times} 10{sup {minus}6} to 49 {times} 10{sup {minus}6} C{sup {minus}1} for TCw, from the negative range to 16 {times} 10{sup {minus}6} {center_dot} {degree}C{sup {minus}1} for PTn, from 6.3 {times} 10{sup {minus}6} to 44 {times} 10{sup {minus}6} C{sup {minus}1} for TSw1, and from 6.7 {times} 10{sup {minus}6} to 37 {times} 10{sup {minus}6} {center_dot} {degree}C{sup {minus}1} for TSw2. Mean values of thermal capacitance in J/cm{sup 3}K (averaged overall specimens) ranged from 1.6 J to 2.1 for TSw1 and from 1.8 to 2.5 for TSw2. In general, the lithostratigraphic classifications of rock assigned by the USGS are consistent with the mineralogical data presented in this report.
Under the sponsorship of the US Department of Energy`s Office of Utility Technologies, the Energy Storage Systems Analysis and Development Department at Sandia National Laboratories (SNL) contracted Frost and Sullivan to conduct a market feasibility study of energy storage systems. The study was designed specifically to quantify the battery energy storage market for utility applications. This study was based on the SNL Opportunities Analysis performed earlier. Many of the groups surveyed, which included electricity providers, battery energy storage vendors, regulators, consultants, and technology advocates, viewed battery storage as an important technology to enable increased use of renewable energy and as a means to solve power quality and asset utilization issues. There are two versions of the document available, an expanded version (approximately 200 pages, SAND97-1275/2) and a short version (approximately 25 pages, SAND97-1275/1).
The DEBRIS Late Phase Melt Progression Model is an assembly of models, embodied in a computer code, which is designed to treat late-phase melt progression in dry rubble (or debris) regions that can form as a consequence of a severe core uncover accident in a commercial light water nuclear reactor. The approach is fully two-dimensional, and incorporates a porous medium modeling framework together with conservation and constitutive relationships to simulate the time-dependent evolution of such regions as various physical processes act upon the materials. The objective of the code is to accurately model these processes so that the late-phase melt progression that would occur in different hypothetical severe nuclear reactor accidents can be better understood and characterized. In this report the models and correlations incorporated and used within the current version of DEBRIS are described. These include the global conservation equations solved, heat transfer and fission heating models, melting and refreezing models (including material interactions), liquid and solid relocation models, gas flow and pressure field models, and the temperature and compositionally dependent material properties employed. The specific models described here have been used in the experiment design analysis of the Phebus FPT-4 debris-bed fission-product release experiment. An earlier DEBRIS code version was used to analyze the MP-1 and MP-2 late-phase melt progression experiments conducted at Sandia National Laboratories for the US Nuclear Regulatory Commission.
Geothermal, or ground-source, heat pumps (GHP) are much more efficient than air-source units such as conventional air conditioners. A major obstacle to their use is the relatively high initial cost of installing the heat-exchange loops into the ground. In an effort to identify drivers which influence installation cost, a number of site visits were made during 1996 to assess the state-of-the-art in drilling for GHP loop installation. As an aid to quantifying the effect of various drilling-process improvements, we constructed a spread-sheet based on estimated time and material costs for all the activities required in a typical loop-field installation. By substituting different (improved) values into specific activity costs, the effect on total project costs can be easily seen. This report contains brief descriptions of the site visits, key points learned during the visits, copies of the spread-sheet, recommendations for further work, and sample results from sensitivity analysis using the spread-sheet.
Galerkin approximations and finite element methods for operator equations of the form Lu = f play an important role in the theory of numerical differential equations. This report summarizes some of the approximation-theoretic and numerical issues encountered in solving operator equations of the form Lu = f. Particular emphasis is placed on Galerkin and finite element approximations using multiwavelets. Examples are used to illustrate some of the issues.
