Publications

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

This report describes tests conducted using a full-size rail cask, the ENSA ENUN 32P, involving handling of the cask and transport of the cask via truck, ships, and rail. The purpose of the tests was to measure strains and accelerations on surrogate pressurized water reactor fuel rods when the fuel assemblies were subjected to Normal Conditions of Transport within the rail cask. In addition, accelerations were measured on the transport platform, the cask cradle, the cask, and the basket within the cask holding the assemblies. These tests were an international collaboration that included Equipos Nucleares S.A., Sandia National Laboratories, Pacific Northwest National Laboratory, Coordinadora Internacional de Cargas S.A., the Transportation Technology Center, Inc., the Korea Radioactive Waste Agency, and the Korea Atomic Energy Research Institute. All test results in this report are PRELIMINARY – complete analyses of test data will be completed and reported in FY18. However, preliminarily: The strains were exceedingly low on the surrogate fuel rods during the rail-cask tests for all the transport and handling modes. The test results provide a compelling technical basis for the safe transport of spent fuel.

Abstract not provided.

An ENUN 32P cask supplied by Equipos Nucleares S.A. (ENSA) was transported 9,600 miles by road, sea, and rail in 2017 in order to collect shock and vibration data on the cask system and surrogate spent fuel assemblies within the cask. The task of examining 101,857 ASCII data files – 6.002 terabytes of data (this includes binary and ASCII files) – has begun. Some results of preliminary analyses are presented in this paper. A total of seventy-seven accelerometers and strain gauges were attached by Sandia National Laboratories (SNL) to three surrogate spent fuel assemblies, the cask basket, the cask body, the transport cradle, and the transport platforms. The assemblies were provided by SNL, Empresa Nacional de Residuos Radiactivos, S.A. (ENRESA), and a collaboration of Korean institutions. The cask system was first subjected to cask handling operations at the ENSA facility. The cask was then transported by heavy-haul truck in northern Spain and shipped from Spain to Belgium and subsequently to Baltimore on two roll-on/roll-off ships. From Baltimore, the cask was transported by rail using a 12- axle railcar to the American Association of Railroads’ Transportation Technology Center, Inc. (TTCI) near Pueblo, Colorado where a series of special rail tests were performed. Data were continuously collected during this entire sequence of multi-modal transportation events. (We did not collect data on the transfer between modes of transportation.) Of particular interest – indeed the original motivation for these tests – are the strains measured on the zirconium-alloy tubes in the assemblies. The strains for each of the transport modes are compared to the yield strength of irradiated Zircaloy to illustrate the margin against rod failure during normal conditions of transport. The accelerometer data provides essential comparisons of the accelerations on the different components of the cask system exhibiting both amplification and attenuation of the accelerations at the transport platforms through the cradle and cask and up to the interior of the cask. These data are essential for modeling cask systems. This paper concentrates on analyses of the testing of the cask on a 12-axle railcar at TTCI.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

The Spent Fuel and Waste Science and Technology Campaign, formerly the Used Fuel Disposition Research and Development Campaign, within the Department of Energy Office of Nuclear Energy identifies alternatives and conducts scientific research and technology development to enable storage, transportation, and disposal of spent nuclear fuel and wastes generated by existing and future nuclear fuel cycles. This paper summarizes the major fiscal year 2016 accomplishments of the spent nuclear fuel storage and transportation part of the campaign. The purpose of the storage and transportation research and development is to support development of the technical basis to inform management and licensing decisions regarding storage and transportation of spent nuclear fuel. Storage research and development focuses on closing technical gaps related to extended storage of spent nuclear fuel, including uncertainties with highburnup spent nuclear fuel cladding performance and long-term canister integrity. Transportation research and development focuses on ensuring transportability of spent nuclear fuel following extended storage, addressing data gaps regarding nuclear fuel integrity, retrievability, and understanding the stresses and strains the fuel experiences during normal conditions of transport. Both of these areas are currently initiating large, multi-year tests, and this paper provides the progress of each. Because the tests are in the initial stages, little data will be presented here; further data will be available as the tests mature. References will be provided in this document for additional background, data, and details.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.