Publications

Results 126–150 of 186

Search results

Jump to search filters

GaSb-based infrared detectors utilizing InAsPSb absorbers

Journal of Vacuum Science and Technology B:Nanotechnology and Microelectronics

Klem, John F.; Hawkins, Samuel D.; Kim, Jin K.; Leonhardt, Darin L.; Shaner, Eric A.; Fortune, Torben R.; Keeler, Gordon A.

InPSb and InAsPSb have been investigated for use as absorber materials in GaSb-based n-type/barrier/n-type (nBn) detectors with cutoff wavelengths shorter than 4.2 μm. The growth temperature window for high-quality InPSb lattice-matched to GaSb by molecular beam epitaxy is approximately 440-460 °C. InPSb films with thicknesses greater than approximately 1 μm or films grown outside this temperature window have high densities of large defects, with films grown at lower temperatures exhibiting evidence of significant phase separation. In contrast, InAsPSb films can be grown with excellent surface morphologies and no apparent phase separation over a wide temperature range. InAsPSb samples with low-temperature photoluminescence between 3.0 and 3.4 μm and lattice mismatch of less than 1 × 10-3 have been grown, although both photoluminescence and x-ray diffraction data exhibit peak splitting indicative of compositional nonuniformity. AlAsSb-barrier nBn detectors with InPSb and InAsPSb absorbers have been fabricated. At 160 K, InPSb-absorber devices have a photocurrent responsivity edge at approximately 2.8 μm and a dark current of approximately 1.4 × 10-7 A/cm2, and InAsPSb devices with responsivity edges of 3.1-3.2 μm have a dark current of 2.3 × 10-8 A/cm2. Both InPSb and InAsPSb devices require significant reverse bias for full photocurrent collection at low temperature, suggesting the existence of an undesirable valence band energy discontinuity. The temperature dependence of dark current indicates that it is dominated by a mechanism other than generation in the undepleted absorber region. © 2013 American Vacuum Society.

More Details
TYPE Conference YEAR 2013
OSTIScopus

Nanoantenna-enabled midwave infrared focal plane arrays

Proceedings of SPIE - The International Society for Optical Engineering

Peters, D.W.; Reinke, Charles M.; Davids, Paul D.; Klem, John F.; Leonhardt, Darin L.; Wendt, J.R.; Kim, Jin K.; Samora, S.

We demonstrate the effects of integrating a nanoantenna to a midwave infrared (MWIR) focal plane array (FPA). We model an antenna-coupled photodetector with a nanoantenna fabricated in close proximity to the active material of a photodetector. This proximity allows us to take advantage of the concentrated plasmonic fields of the nanoantenna. The role of the nanoantenna is to convert free-space plane waves into surface plasmons bound to a patterned metal surface. These plasmonic fields are concentrated in a small volume near the metal surface. Field concentration allows for a thinner layer of absorbing material to be used in the photodetector design and promises improvements in cutoff wavelength and dark current (higher operating temperature). While the nanoantenna concept may be applied to any active photodetector material, we chose to integrate the nanoantenna with an InAsSb photodiode. The geometry of the nanoantenna-coupled detector is optimized to give maximal carrier generation in the active region of the photodiode, and fabrication processes must be altered to accommodate the nanoantenna structure. The intensity profiles and the carrier generation rates in the photodetector active layers are determined by finite element method simulations, and iteration between optical nanoantenna simulation and detector modeling is used to optimize the device structure. © 2012 SPIE.

More Details
TYPE Conference YEAR 2012
OSTIScopus
Results 126–150 of 186
Results 126–150 of 186