Publications Details

Pressurized Water Reactor Dashpot Region Response to Commercial Drying Cycles

Pulido, Ramon P.; TACONI, ANNA M.; Laros, James H.; Fasano, Raymond E.; Durbin, S.G.

A new small-scale pressure vessel with a 5×5 fuel assembly and axially truncated PWR hardware was created to simulate commercial vacuum drying processes. This test assembly, known as the Dashpot Drying Apparatus, was built to focus on the drying of a single PWR dashpot and surrounding fuel. Drying operations were simulated for three tests with the DDA based on the pressure and temperature histories observed in the HBDP. All three tests were conducted with an empty guide tube. One test was performed with deionized water as the fill fluid. The other two tests used 0.2 M boric acid as the fill fluid to accurately simulate spent fuel pool conditions. These tests proved the capability of the DDA to mimic commercial drying processes on a limited scale and detect the presence of bulk and residual water. Furthermore, for all tests, pressure remained below the 0.4 kPa (3 Torr) rebound threshold for the final evacuation step in the drying procedure. Results indicate that after bulk fluid is removed from the pressure vessel, residual water is verifiably measured through confirmatory measurements of pressure and water content using a mass spectrometer. The final pressure rebound behaviors for the three tests conducted were well below the established regulatory limit of less than 0.4 kPa (3 Torr) within 30 minutes of isolation. The water content measurements across all tests showed that despite observing high water content within the DDA vessel at the beginning of the vacuum isolations, the water content drastically drops to below 1,200 ppmv after the isolations were conducted. The data and operational experience from these tests will guide the next evolution of experiments on a prototypic-length scale with multiple surrogate rods in a full 17×17 PWR assembly. The insight gained through these investigations is expected to support the technical basis for the continued safe storage of spent nuclear fuel into long term operations.