This project aimed to identify the performance-limiting mechanisms in mid- to far infrared (IR) sensors by probing photogenerated free carrier dynamics in model detector materials using scanning ultrafast electron microscopy (SUEM). SUEM is a recently developed method based on using ultrafast electron pulses in combination with optical excitations in a pump- probe configuration to examine charge dynamics with high spatial and temporal resolution and without the need for microfabrication. Five material systems were examined using SUEM in this project: polycrystalline lead zirconium titanate (a pyroelectric), polycrystalline vanadium dioxide (a bolometric material), GaAs (near IR), InAs (mid IR), and Si/SiO 2 system as a prototypical system for interface charge dynamics. The report provides detailed results for the Si/SiO 2 and the lead zirconium titanate systems.
Analog resistive memories promise to reduce the energy of neural networks by orders of magnitude. However, the write variability and write nonlinearity of current devices prevent neural networks from training to high accuracy. We present a novel periodic carry method that uses a positional number system to overcome this while maintaining the benefit of parallel analog matrix operations. We demonstrate how noisy, nonlinear TaOx devices that could only train to 80% accuracy on MNIST, can now reach 97% accuracy, only 1% away from an ideal numeric accuracy of 98%. On a file type dataset, the TaOx devices achieve ideal numeric accuracy. In addition, low noise, linear Li1-xCoO2 devices train to ideal numeric accuracies using periodic carry on both datasets.
Resistive memories enable dramatic energy reductions for neural algorithms. We propose a general purpose neural architecture that can accelerate many different algorithms and determine the device properties that will be needed to run backpropagation on the neural architecture. To maintain high accuracy, the read noise standard deviation should be less than 5% of the weight range. The write noise standard deviation should be less than 0.4% of the weight range and up to 300% of a characteristic update (for the datasets tested). Asymmetric nonlinearities in the change in conductance vs pulse cause weight decay and significantly reduce the accuracy, while moderate symmetric nonlinearities do not have an effect. In order to allow for parallel reads and writes the write current should be less than 100 nA as well.
Resistive memories enable dramatic energy reductions for neural algorithms. We propose a general purpose neural architecture that can accelerate many different algorithms and determine the device properties that will be needed to run backpropagation on the neural architecture. To maintain high accuracy, the read noise standard deviation should be less than 5% of the weight range. The write noise standard deviation should be less than 0.4% of the weight range and up to 300% of a characteristic update (for the datasets tested). Asymmetric nonlinearities in the change in conductance vs pulse cause weight decay and significantly reduce the accuracy, while moderate symmetric nonlinearities do not have an effect. In order to allow for parallel reads and writes the write current should be less than 100 nA as well.
We present a study of the 'snap-back' regime of resistive switching hysteresis in bipolar TaOx memristors, identifying power signatures in the electronic transport. Using a simple model based on the thermal and electric field acceleration of ionic mobilities, we provide evidence that the 'snap-back' transition represents a crossover from a coupled thermal and electric-field regime to a primarily thermal regime, and is dictated by the reconnection of a ruptured conducting filament. We discuss how these power signatures can be used to limit filament radius growth, which is important for operational properties such as power, speed, and retention.
Resistive random access memory (ReRAM), or memristors, may be capable of significantly improve the efficiency of neuromorphic computing, when used as a central component of an analog hardware accelerator. However, the significant electrical variation within a device and between devices degrades the maximum efficiency and accuracy which can be achieved by a ReRAMbased neuromorphic accelerator. In this report, the electrical variability is characterized, with a particular focus on that which is due to fundamental, intrinsic factors. Analytical and ab initio models are presented which offer some insight into the factors responsible for this variability.
Resistive random access memory (ReRAM), or memristors, may be capable of significantly improve the efficiency of neuromorphic computing, when used as a central component of an analog hardware accelerator. However, the significant electrical variation within a device and between devices degrades the maximum efficiency and accuracy which can be achieved by a ReRAMbased neuromorphic accelerator. In this report, the electrical variability is characterized, with a particular focus on that which is due to fundamental, intrinsic factors. Analytical and ab initio models are presented which offer some insight into the factors responsible for this variability.