Publications

Results 96751–96775 of 100,993

Search results

Jump to search filters

System analysis: Developing tools for the future

De Jong, Kent

This report introduces and evaluates system analysis tools that were developed, or are under development, for the Robotics Technology Development Program (RTDP). Additionally, it discusses system analysis work completed using these tools aimed at completing a system analysis of the retrieval of waste from underground storage tanks on the Hanford Reservation near Richland, Washington. The tools developed and evaluated include a mixture of commercially available tools adapted to RTDP requirements, and some tools developed in house. The tools that are included in this report include: a Process Diagramming Tool, a Cost Modeling Tool, an Amortization Modeling Tool, a graphical simulation linked to the Cost Modeling Tool, a decision assistance tool, and a system thinking tool. Additionally, the importance of performance testing to the RTDP and the results of such testing executed is discussed. Further, the results of the Tank Waste Retrieval (TWR) System Diagram, the TWR Operations Cost Model, and the TWR Amortization Model are presented, and the implication of the results are discussed. Finally, the RTDP system analysis tools are assessed and some recommendations are made regarding continuing development of the tools and process.

More Details

An alternative approach to filled--via processing

Farino, A.J.

In order to create sub micron vias between metal layers on silicon IC circuits, the tungsten filled via processes have been in a constant state of development over the past 15 years. Processing is complex, expensive, and difficult to reproduce. The introduction of galvanic cells, via undercutting, and exposed plugs are just some of the plagues that have hit several users of the technology. Discussed in this paper is an alternative approach to the complex tungsten filled via interconnect process. The proposed process yields well at sub micron geometries, is easy to perform, and is inexpensive compared to the tungsten filled via process. Contact resistance improves greatly over the standard tungsten process. The test run achieved a mean value of 0.25 ohms per via compared to historic tungsten process that yields 0.4 ohms per via. The distribution was also excellent with sigma recorded at 0.025 ohms per via.

More Details

The future of components for high reliability military and space applications

Hanlon, James T.

Military specified, ceramic packaged and radiation hardened components will disappear before the end of the century. The only long-term sustainable alternative may well be to use plastic packaged Commercial Components. The material in this report comes from the Defense Logistics Agency sponsored Plastic Package Availability Program and from an AT and T field reliability study. It summarizes Case Studies from companies which have been building and fielding highly reliable commercial and DOD military systems using plastic commercial components. Findings are, that when properly selected commercial components are operated within the true limitations of their design and packaging, they are as reliable as today`s Mil Spec components. Further, they offer cost, space and weight savings, shared manufacturing and field test experience with industry, and access to the most modern technology. Also reported are potential problems that may be encountered when using commercial components, their long term storage and use reliability characteristics, recommended design processes and supplier selection practices, commercial best business practices, and a semiconductor manufacturer`s view of the military`s switch to commercial plastic microcircuits.

More Details

Safety assessment of a robotic system handling nuclear material

Atcitty, Stanley

This paper outlines the use of a Failure Modes and Effects Analysis for the safety assessment of a robotic system being developed at Sandia National Laboratories. The robotic system, The Weigh and Leak Check System, is to replace a manual process at the Department of Energy facility at Pantex by which nuclear material is inspected for weight and leakage. Failure Modes and Effects Analyses were completed for the robotics process to ensure that safety goals for the system had been meet. These analyses showed that the risks to people and the internal and external environment were acceptable.

More Details

A biological microcavity laser

Gourley, Paul L.

We have demonstrated a new semiconductor laser device that may be useful in high speed characterization of cell morphology for diagnosis of disease. This laser device has critical advantages over conventional cell fluorescence detection methods since it provides intense, monochromatic, low divergence light signals that are emitted from lasing modes confined by a cell. Further, the device integrates biological structures with semiconductor materials at the wafer level to reduce size and simplify cell preparation. This microcavity semiconductor laser comprises a vertical cavity surface-emitting semiconductor, to provide gain and feedback for light confined by cells, and a dielectric mirror to close the cavity. Transparent cells loaded into the cavity act as dielectric waveguides to define transverse electromagnetic modes. Light emitted from the microcavity can be resolved into narrow spectral modes, high-contrast/coherent light images, or time-dependent pulses that reveal cell morphology and size. We have used this laser device as a cytometer in two basic configurations. First, as a probe of individual cells by spectral analysis of cell modes. Second, as scanning cytometer for rapidly probing large numbers of cells by pulse height spectroscopy.

More Details

Incorporation of wavelength selective devices into waveguides with applications to a miniature spectrometer

Stallard, Brian R.

This report pertains to a Laboratory Directed Research and Development project which was funded for FY94 and FY95. The goal was to develop building blocks for small, cheap sensors that use optical spectroscopy as a means of detecting chemical analytes. Such sensors can have an impact on a wide variety of technologies, such as: industrial process control, environmental monitors, chemical analysis in medicine, and automotive monitors. We describe work in fabricating and demonstrating a waveguide/grating device that can serve as the wavelength dispersive component in a miniature spectrometer. Also, we describe the invention and modeling of a new way to construct an array of optical interference filters using sub-wavelength lithography to tune the index of refraction of a fixed Fabry-Perot cavity. Next we describe progress in more efficiently calculating the fields in grating devices. Finally we present the invention of a new type of near field optical probe, applicable to scanning microscopy or optical data storage, which is based on a circular grating constructed in a waveguide. This result diverges from the original goal of the project but is quite significant in that it promises to increase the data storage capacity of CD-ROMs by 10 times.

More Details

Learning foraging thresholds for lizards

Hart, William E.

This work gives a proof of convergence for a randomized learning algorithm that describes how anoles (lizards found in the Carribean) learn a foraging threshold distance. This model assumes that an anole will pursue a prey if and only if it is within this threshold of the anole`s perch. This learning algorithm was proposed by the biologist Roughgarden and his colleagues. They experimentally confirmed that this algorithm quickly converges to the foraging threshold that is predicted by optimal foraging theory our analysis provides an analytic confirmation that the learning algorithm converses to this optimal foraging threshold with high probability.

More Details

Space Reactor Safety, 1985-1995 Lessons Learned

Marshall, Albert C.

Space reactor safety activities and decisions have evolved over the last decade. Important safety decisions have been made in the SP-100, Space Exploration Initiative, NEPSTP, SNTP, and Bimodal Space Reactor programs. In addition, international guidance on space reactor safety has been instituted. Space reactor safety decisions and practices have developed in the areas of inadvertent criticality, reentry, radiological release, orbital operation, programmatic, and policy. In general, the lessons learned point out the importance of carefully reviewing previous safety practices for appropriateness to space nuclear programs in general and to the specific mission under consideration.

More Details

Damping measurements using operational data

Journal of Solar Energy Engineering, Transactions of the ASME

James, G.H.; Carne, T.G.; Veers, P.S.

We have measured modal damping using strain-gauge data from an operating wind turbine. This new technique for measuring modal damping is easier and less expensive than previously used methods. Auto-correlation and cross-correlation functions of the strain-gauge data have been shown to consist of decaying sinusoids which correspond to the modal frequencies and damping ratios of the wind turbine. We have verified the method by extracting damping values from an analytically generated data set. Actual operating response data from the DOE/Sandia 34-m Test Bed has been used to calculate modal damping ratios as a function of rotor rotation rate. This capability will allow more accurate fatigue life prediction and control. © 1996 by ASME.

More Details

Rapid thermal processing of high-efficiency silicon solar cells with controlled in-situ annealing

Solar Energy Materials and Solar Cells

Ruby, Douglas S.

Silicon solar cell efficiencies of 17.1%, 16.4%, 14.8%, and 14.9% have been achieved on FZ, Cz, multicrystalline (mc-Si), and dendritic web (DW) silicon, respectively, using simplified, cost-effective rapid thermal processing (RTP). These represent the highest reported efficiencies for solar cells processed with simultaneous front and back diffusion with no conventional high-temperature furnace steps. Appropriate diffusion temperature coupled with the added in-situ anneal resulted in suitable minority-carrier lifetime and diffusion profiles for high-efficiency cells. The cooling rate associated with the in-situ anneal can improve the lifetime and lower the reverse saturation current density (Jo), however, this effect is material and base resistivity specific. PECVD antireflection (AR) coatings provided low reflectance and efficient front surface and bulk defect passivation. Conventional cells fabricated on FZ silicon by furnace diffusions and oxidations gave an efficiency of 18.8% due to greater short wavelength response and lower Jo.

More Details

A solenoidal and monocusp ion source (SAMIS)

Review of Scientific Instruments

Burns, E.J.T.

We have developed a new magnetic monocusp ion source for single aperture applications such as neutron generators. Coupling solenoidal magnetic fields on both sides of a monocusp magnetic field has generated over 70% atomic deuterium ions at pressures as low as 0.4 Pa (3 mTorr). This article describes the performance and characteristics of the solenoidal and monocusp ion source. © 1996 American Institute of Physics.

More Details

Corrosive effects of supercritical carbon dioxide and cosolvents on metals

Journal of Supercritical Fluids

Russick, Edward M.

With the eventual phase-out of chlorofluorocarbons and hydrochlorofluorocarbons, and restrictive regulations concerning the use of other volatile organic compounds as cleaning solvents, it is essential to seek new, environmentally acceptable cleaning processes. We are investigating supercritical carbon dioxide (CO2) as an alternative solvent for precision cleaning of machined metal parts in governmental and industrial cleaning processes. The compatibility of metals in supercritical-fluid cleaning media with respect to corrosion must be addressed. In this work, a screening study of the corrosive effects of supercritical CO2 and several supercritical cosolvents on selected metals was conducted. Sample coupons of stainless steel (grades 304LSS, 316SS), aluminum (grades 2024, 6061, 7075), carbon steel (1018), and copper (CDA 101) were statically exposed to pure supercritical CO2, water-saturated supercritical CO2, 10 wt % methanol/CO2 cosolvent, and 4 wt % tetrahydrofurfuryl alcohol (THFA)/CO2 at 24,138 kPa (3500 psig) and 323 K (50 °C) for 24 h. Gravimetric analysis and magnified visual inspection of the coupons were performed before and after the exposure tests. Surface analyses including electron microprobe analysis (EMPA), X-ray photoelectron spectroscopy (XPS), and Auger electron spectroscopy (AES) were done where visual and gravimetric changes were indicative of corrosive attack. The metal alloys were found to be compatible with the supercritical test media barring a few exceptions. Corrosive attack was observed on 1018 carbon steel in the water-saturated CO2 environment, and also on 2024 aluminum and CDA 101 copper, both in the 10 wt % methanol-CO2 cosolvent. The results of all compatibility testing are reported, and hypotheses are formed in an attempt to explain possible corrosion mechanisms.

More Details

Hazards to people and aircraft from flight test debris generated at high altitudes

34th Aerospace Sciences Meeting and Exhibit

Cole, J.K.; Wolfe, W.P.

A survey of existing data has been completed in order to examine the hazards to people exposed on the ground and to in-flight aircraft by debris produced during high-altitude, rocket-boosted flight tests. These data were then analyzed to quantify the particle sizes and energy levels below which the fragments no longer pose a hazard. The survey results are presented here and recommendations made regarding the minimum energy levels and minimum particle size that need be considered in a flight safety analysis.

More Details

Reciprocal space analysis of the initial stages of strain relaxation in SiGe epilayers

Materials Research Society Symposium - Proceedings

Lee, Stephen R.

Metastable SiGe films were grown by MBE on Si (001) substrates and annealed to promote varying degrees of partial relaxation. X-ray diffraction reciprocal-space analysis was then used to monitor the structural evolution of the displacement fields of the dislocation array with increasing misfit density. The diffuse-x-ray-scattering patterns of the dislocated heterolayers were compared with lineal-misfit densities determined by defect etching, leading us to develop a geometric model which provides a framework for understanding the early-stage evolution of the displacement fields of the dislocation array, and which also explicitly links diffuse x-ray intensity to misfit density. At low misfit density, the diffuse intensity arises from two-dimensional displacement fields associated with single-nonoverlapping dislocations. As misfit density increases, the displacement fields of individual dislocations increasingly overlap producing three-dimensional displacements. The evolving diffuse intensity reflects the transition from 2-D to 3-D displacement fields. Finally, it is demonstrated that the diffuse x-ray intensity of the strained epilayer can be used to accurately measure lineal misfit-dislocation densities from 400 to 20,000 lines/cm.

More Details

Microstructurally based finite element simulation of solder joint behavior

National Electronic Packaging and Production Conference-Proceedings of the Technical Program (West and East)

Frear, D.R.

The most commonly used solder for electrical interconnects in electronic packages is the near eutectic 60Sn-40Pb alloy. This alloy has a number of processing advantages (suitable melting point of 183°C and good wetting behavior). However, under conditions of cyclic strain and temperature (thermomechanical fatigue) the microstructure of this alloy undergoes a heterogeneous coarsening and failure process that makes the prediction of solder joint lifetime complex. A finite element simulation methodology to predict solder joint mechanical behavior, that includes microstructural evolution, has been developed. The mechanical constitutive behavior was incorporated into the time dependent internal state variable viscoplastic model through experimental creep tests. The microstructural evolution is incorporated through a series of mathematical relations that describe mass flow in a temperature/strain environment. The model has been found to simulate observed thermomechanical fatigue behavior in solder joints.

More Details

Application of the FD-TD method to the electromagnetic modeling of patch antenna arrays

Annual Review of Progress in Applied Computational Electromagnetics

Pasik, Michael F.

The FD-TD method and the Berenger Perfectly Matched Layer (PML) absorbing condition are applied to the modeling of a 32-element patch array. Numerical results for the return loss at the array feed are presented and compared to measured results for the purpose of model validation.

More Details

DOE programs in fire and materials

International SAMPE Symposium and Exhibition (Proceedings)

Skocypec, Russell D.

One of the Department of Energy's programs for assuring the safety and security of nuclear weapons, nuclear power plants and hazardous material containers is discussed. A Fire Science and Technology program has been established at Sandia National Laboratories to integrate those technologies needed for creating validated numerical simulations of real fires and the response by real objects exposed to fire. This paper describes Sandia's program for integrating fire science and technology into predictive capabilities which provide engineering solutions to high-consequence fire-related problems. The integration of solid materials and fire issues will be emphasized.

More Details

Surface pressure measurements on a hypersonic vehicle

34th Aerospace Sciences Meeting and Exhibit

Oberkampf, William L.

Extensive surface pressure measurements were obtained on a hypersonic vehicle configuration at Mach 8 for the purpose of computational fluid dynamics code validation. Experiments were conducted in the Sandia National Laboratories hypersonic wind tunnel. All measurements were made for laminar flow conditions at a Reynolds number (based on model length) of 1.81 x 106 and perfect gas conditions. The basic vehicle configuration is a spherically blunted, 10° half-angle cone, with a slice parallel to the axis of the vehicle. Flaps of varying angle (10, 20, and 30°) could be attached to the aft portion of the slice. Surface pressure measurements at 96 locations on the body surface were obtained for angles of attack from -10 to +18° and for various roll angles. All three deflected flap angles produced separated flow on the sliced portion of the body in front of the flap. Because of the three-dimensional expansion over the slice, the separated flow on the slice and flap was also highly threedimensional. The results of the present experiment provide extensive surface pressure measurements for the validation of computational fluid dynamics codes for separated flow caused by an embedded shock wave.

More Details

Active vibration control of a photolithography platen for increased resolution and throughput

37th AIAA/ASME/ASCE/AHS/ASC Structure, Structural Dynamics and Materials Conference

Redmond, James M.

An experimental investigation into active control of bending vibrations in thick plate-like structural elements is described. This work is motivated by vibration problems encountered in manufacturing processes that require greater control authority than is available from conventional surface mounted PZT patches or PVDF films. The focus of this experiment is a surrogate photolithography platen in which PZT stacks are mounted in cutouts on the platen top surface. These actuators provide significant vibration control authority by generating moments in the platen through their compressive loads. A Positive Position Feedback control law is used to significantly augment the damping in the first two bending modes. The implications of the experimental results for photolithography machines are discussed.

More Details

Experimental and analytical program to determine strains in 737 lap splice joints subjected to normal fuselage pressurization loads

37th AIAA/ASME/ASCE/AHS/ASC Structure, Structural Dynamics and Materials Conference

Roach, Dennis P.

The Federal Aviation Administration Technical Center (FAATC) has initiated several research projects to assess the structural integrity of the aging commercial aircraft fleet. One area of research involves the understanding of a phenomenon known as “Widespread Fatigue Damage” or WFD, which refers to a type of multiple element cracking that degrades the damage tolerance capability of an aircraft structure. Research on WFD has been performed both experimentally and analytically including finite element modeling of fuselage lap splice joints by the Volpe Center. Fuselage pressurization tests have also been conducted at the FAA's Airworthiness Assurance NDI Validation Center (AANC) to obtain strain gage data from select locations on the FAA/AANC 737 Transport Aircraft Test Bed. One-hundred strain channels were used to monitor five different lap splice bays including the fuselage skin and substructure elements. These test results have been used to evaluate the accuracy of the analytical models and to support general aircraft analysis efforts. This paper documents the strain fields measured during the AANC tests and successfully correlates the results with analytical predictions.

More Details

High Speed Traveling Wave Electrooptic Intensity Modulator with a Doped PIN Semiconductor Junction

Optics InfoBase Conference Papers

Vawter, G.A.; Hietala, V.M.; Wendt, J.R.; Fuchs, B.A.; Hafich, M.; Housel, M.; Armendariz, M.; Sullivan, C.T.

A high-electrooptic-efficiency Mach-Zehnder intensity modulator is demonstrated with a bandwidth exceeding 40 GHZ. The 1 mm-long modulator has a switching voltage comparable to undoped semiconductor designs of much greater length.

More Details

Tapered-Rib Adiabatic-Following Fiber Coupler

Optics InfoBase Conference Papers

Smith, R.E.; Vawter, G.A.; Hadley, G.R.; Sullivan, C.T.; Wendt, J.R.; Snipes, B.; Klem, J.F.

We present the design and experimental verification of a Tapered-Rib Adiabatic-Following Fiber Coupler (TRAFFiC). This device is a monolithically integratable structure fabricated in AlGaAs designed to increase the coupling efficiency of conventional optical fibers to tightly confined semiconductor waveguide devices. This approach offers the possibility of significantly reducing fiber butt coupling losses from the typical values of 7 to 10 dB to values of 0.5 to 3 dB. This long-standing packaging problem is one of the major impediments to the widespread acceptance of semiconductor-based optoelectronics. Moreover, the design can be implemented with minimal increase in fabrication complexity since it uses only epitaxial growth, lithography and etching.

More Details

Identifying damping of a subsystem by two inverse-dynamics methods

Proceedings of SPIE - The International Society for Optical Engineering

Segalman, Daniel J.

A strategy is presented to develop computationally efficient models for a class of structures containing nonlinearities. Those structures are ones for which the predominant nonlinearity is in the interfaces of linear subsystems. In those cases, one hopes to achieve low order models for the linear subsystems coupled with simplistic models for the interfaces. The theme of this paper is that of deducing the properties of the nonlinear interfaces by examining the properties of the full nonlinear structure in light of the known properties of the linear subsystems. Situations where such problems arise include those where the nonlinearity derives from sliding friction or stick-slip friction. Those conditions can seriously compromise system performance if not addressed adequately, occasionally leading to either sloppy control or complete loss of stability. It is the problem of identifying those nonlinear subsystems that is addressed here.

More Details
Results 96751–96775 of 100,993
Results 96751–96775 of 100,993
Top