Publications

Abstract not provided.

In recent years, several integer programming models have been proposed to place sensors in municipal water networks in order to detect intentional or accidental contamination. Although these initial models assumed that it is equally costly to place a sensor at any place in the network, there clearly are practical cost constraints that would impact a sensor placement decision. Such constraints include not only labor costs but also the general accessibility of a sensor placement location. In this paper, we extend our integer program to explicitly model the cost of sensor placement. We partition network locations into groups of varying placement cost, and we consider the public health impacts of contamination events under varying budget constraints. Thus our models permit cost/benefit analyses for differing sensor placement designs. As a control for our optimization experiments, we compare the set of sensor locations selected by the optimization models to a set of manually-selected sensor locations.

Electrical operation of III-Nitride light emitting diodes (LEDs) with photonic crystal structures is demonstrated. Employing photonic crystal structures in III-Nitride LEDs is a method to increase light extraction efficiency and directionality. The photonic crystal is a triangular lattice formed by dry etching into the III-Nitride LED. A range of lattice constants is considered (a {approx} 270-340nm). The III-Nitride LED layers include a tunnel junction providing good lateral current spreading without a semi-absorbing metal current spreader as is typically done in conventional III-Nitride LEDs. These photonic crystal III-Nitride LED structures are unique because they allow for carrier recombination and light generation proximal to the photonic crystal (light extraction area) yet displaced from the absorbing metal contact. The photonic crystal Bragg scatters what would have otherwise been guided modes out of the LED, increasing the extraction efficiency. The far-field light radiation patterns are heavily modified compared to the typical III-Nitride LED's Lambertian output. The photonic crystal affects the light propagation out of the LED surface, and the radiation pattern changes with lattice size. LEDs with photonic crystals are compared to similar III-Nitride LEDs without the photonic crystal in terms of extraction, directionality, and emission spectra.

Abstract not provided.

Abstract not provided.

Experimental evidence suggests that the energy balance between processes in play during wire array implosions is not well understood. In fact the radiative yields can exceed by several times the implosion kinetic energy. A possible explanation is that the coupling from magnetic energy to kinetic energy as magnetohydrodynamic plasma instabilities develop provides additional energy. It is thus important to model the instabilities produced in the after implosion stage of the wire array in order to determine how the stored magnetic energy can be connected with the radiative yields. To this aim three-dimensional hybrid simulations have been performed. They are initialized with plasma radial density profiles, deduced in recent experiments [C. Deeney et al., Phys. Plasmas 6, 3576 (1999)] that exhibited large x-ray yields, together with the corresponding magnetic field profiles. Unlike previous work, these profiles do not satisfy pressure balance and differ substantially from those of a Bennett equilibrium. They result in faster growth with an associated transfer of magnetic energy to plasma motion and hence kinetic energy.

Pulsed power driven metallic wire-array Z pinches are the most powerful and efficient laboratory x-ray sources. Furthermore, under certain conditions the soft x-ray energy radiated in a 5 ns pulse at stagnation can exceed the estimated kinetic energy of the radial implosion phase by a factor of 3 to 4. A theoretical model is developed here to explain this, allowing the rapid conversion of magnetic energy to a very high ion temperature plasma through the generation of fine scale, fast-growing m=0 interchange MHD instabilities at stagnation. These saturate nonlinearly and provide associated ion viscous heating. Next the ion energy is transferred by equipartition to the electrons and thus to soft x-ray radiation. Recent time-resolved iron spectra at Sandia confirm an ion temperature T{sub i} of over 200 keV (2 x 10{sup 9} degrees), as predicted by theory. These are believed to be record temperatures for a magnetically confined plasma.

Abstract not provided.

Bayesian medical monitoring is a concept based on using real-time performance-related data to make statistical predictions about a patient's future health. The following paper discusses the fundamentals behind the medical monitoring concept and the application to monitoring the health of nuclear reactors. Necessary assumptions are discussed regarding distributions and failure-rate calculations. A simple example is performed to illustrate the effectiveness of the methods. The methods perform very well for the thirteen subjects in the example, with a clear failure sequence identified for eleven of the subjects.

A novel dual stage chemiluminescence detection system incorporating individually controlled hot stages has been developed and applied to probe for material interaction effects during polymer degradation. Utilization of this system has resulted in experimental confirmation for the first time that in an oxidizing environment a degrading polymer A (in this case polypropylene, PP) is capable of infecting a different polymer B (in this case polybutadiene, HTPB) over a relatively large distance. In the presence of the infectious degrading polymer A, the thermal degradation of polymer B is observed over a significantly shorter time period. Consistent with infectious volatiles from material A initiating the degradation process in material B it was demonstrated that traces (micrograms) of a thermally sensitive peroxide in the vicinity of PP could induce degradation remotely. This observation documents cross-infectious phenomena between different polymers and has major consequences for polymer interactions, understanding fundamental degradation processes and long-term aging effects under combined material exposures.

Photocatalytic porphyrins are used to reduce metal complexes from aqueous solution and, further, to control the deposition of metals onto porphyrin nanotubes and surfactant assembly templates to produce metal composite nanostructures and nanodevices. For example, surfactant templates lead to spherical platinum dendrites and foam-like nanomaterials composed of dendritic platinum nanosheets. Porphyrin nanotubes are reported for the first time, and photocatalytic porphyrin nanotubes are shown to reduce metal complexes and deposit the metal selectively onto the inner or outer surface of the tubes, leading to nanotube-metal composite structures that are capable of hydrogen evolution and other nanodevices.

Abstract not provided.

Computation of space-charge current-limiting effects across a vacuum cavity between parallel electrodes has previously been carried out only for thermionic emission spectra. In some applications, where the current arises from an injected electron beam or photo-Compton emission from electrode walls, the electron energy spectra may deviate significantly from Maxwellian. Considering the space charge as a collisionless plasma, we derive an implicit equation for the peak cavity potential assuming steady-state currents. For the examples of graphite, nickel, and gold electrodes exposed to x rays, we find that cavity photoemission currents are typically more severely space-charge limited than they would be with the assumption of a purely Maxwellian energy distribution.

Network administrators and security analysts often do not know what network services are being run in every corner of their networks. If they do have a vague grasp of the services running on their networks, they often do not know what specific versions of those services are running. Actively scanning for services and versions does not always yield complete results, and patch and service management, therefore, suffer. We present Net-State, a system for monitoring, storing, and reporting application and operating system version information for a network. NetState gives security and network administrators the ability to know what is running on their networks while allowing for user-managed machines and complex host configurations. Our architecture uses distributed modules to collect network information and a centralized server that stores and issues reports on that collected version information. We discuss some of the challenges to building and operating NetState as well as the legal issues surrounding the promiscuous capture of network data. We conclude that this tool can solve some key problems in network management and has a wide range of possibilities for future uses.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

The stainless steel alloy 17-4PH contains a martensitic microstructure and second phase delta ({delta}) ferrite. Strengthening of 17-4PH is attributed to Cu-rich precipitates produced during age hardening treatments at 900-1150 F (H900-H1150). For wrought 17-4PH, the effects of heat treatment and microstructure on mechanical properties are well-documented [for example, Ref. 1]. Fewer studies are available on cast 17-4PH, although it has been a popular casting alloy for high strength applications where moderate corrosion resistance is needed. Microstructural features and defects particular to castings may have adverse effects on properties, especially when the alloy is heat treated to high strength. The objective of this work was to outline the effects of microstructural features specific to castings, such as shrinkage/solidification porosity, on the mechanical behavior of investment cast 17-4PH. Besides heat treatment effects, the results of metallography and SEM studies showed that the largest effect on mechanical properties is from shrinkage/solidification porosity. Figure 1a shows stress-strain curves obtained from samples machined from castings in the H925 condition. The strength levels were fairly similar but the ductility varied significantly. Figure 1b shows an example of porosity on a fracture surface from a room-temperature, quasi-static tensile test. The rounded features represent the surfaces of dendrites which did not fuse or only partially fused together during solidification. Some evidence of local areas of fracture is found on some dendrite surfaces. The shrinkage pores are due to inadequate backfilling of liquid metal and simultaneous solidification shrinkage during casting. A summary of percent elongation results is displayed in Figure 2a. It was found that higher amounts of porosity generally result in lower ductility. Note that the porosity content was measured on the fracture surfaces. The results are qualitatively similar to those found by Gokhale et al. and Surappa et al. in cast A356 Al and by Gokhale et al. for a cast Mg alloys. The quantitative fractography and metallography work by Gokhale et al. illustrated the strong preference for fracture in regions of porosity in cast material. That is, the fracture process is not correlated to the average microstructure in the material but is related to the extremes in microstructure (local regions of high void content). In the present study, image analysis on random cross-sections of several heats indicated an overall porosity content of 0.03%. In contrast, the area % porosity was as high as 16% when measured on fracture surfaces of tensile specimens using stereology techniques. The results confirm that the fracture properties of cast 17-4PH cannot be predicted based on the overall 'average' porosity content in the castings.

Abstract not provided.

Abstract not provided.

Qualification Alternatives to the Sandia Pulsed Reactor (QASPR) and US DOE's Advanced Simulation and Computing (ASC).