Publications

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Utilities are increasingly concerned about the potential negative impacts distributed PV may have on the operational integrity of their distribution feeders. Some have proposed novel methods for controlling a PV system's grid - tie inverter to mitigate poten tial PV - induced problems. This report investigates the effectiveness of several of these PV advanced inverter controls on improving distribution feeder operational metrics. The controls are simulated on a large PV system interconnected at several locations within two realistic distribution feeder models. Due to the time - domain nature of the advanced inverter controls, quasi - static time series simulations are performed under one week of representative variable irradiance and load data for each feeder. A para metric study is performed on each control type to determine how well certain measurable network metrics improve as a function of the control parameters. This methodology is used to determine appropriate advanced inverter settings for each location on the f eeder and overall for any interconnection location on the feeder.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

From 2010 through the first half of 2015, the installed capacity of solar photovoltaics (PV) connected to the U.S. distribution system increased sixfold, from approximately 1.8 GW to more than 11 GW. This accounts for over half of the approximate total U.S. solar installations of 20 GW. Distributed generation from PV (DGPV) is expected to comprise 50%–60% of total U.S. PV capacity through at least 2020. The rapid deployment of high penetrations of DGPV into the distribution system has both highlighted challenges and demonstrated many successful examples of integrating higher penetration levels than previously thought possible. In this report, we analyze challenges, solutions, and research needs in the context of DGPV deployment to date and the much higher levels of integration that are expected with the achievement of the U.S. Department of Energy’s SunShot targets.

Abstract not provided.

Abstract not provided.

The Task 1 objective is to “expedite the PV interconnection process by revising the screening process in California”. The goal of this task is to develop a data-driven, validated approach to determining feeder limits that can simplify interconnection processes and lead to greater PV adoption across the California distribution system.

This task describes R&D activities to establish methods to cost-effectively achieve very high PV penetration scenarios (well beyond 100% of peak load at the feeder level) by leveraging distributed inverters to increase situational awareness and provide local voltage support. The grid performance and reliability objectives (SI vision) of this proposal were selected to enhance feeder planning models that can better characterize and quantify the electric power system including the secondary system servicing customers. The Communication objective was selected to demonstrate how visibility and control of behind-the-meter systems and distributed storage at large scale can be optimized to address system reliability and variability impacts, and to maximize the value of solar in high PV penetration scenarios. The goal of this project was to achieve enhanced grid operation and optimized PV penetration utilizing highly distributed sensor data via three subtasks 1.1-1.3.

The research presented in this report compares several real - time control strategies for the power output of a large number of PV distributed throughout a large distribution feeder circuit. Both real and reactive power controls are considered with the goal of minimizing network over - voltage violations caused by large amounts of PV generation. Several control strategies are considered under various assumptions regarding the existence and latency of a communication network. The control parameters are adjusted to maximize the effectiveness of each control. The controls are then compared based on their ability to achieve multiple objectiv es. These objectives include minimizing the total number of voltage violations , minimizing the total amount of PV energy curtailed or reactive power generated, and maximizing the fairness of any control action among all PV systems . The controls are simulat ed on the OpenDSS platform using time series load and spatially - distributed irradiance data.

Utilities issuing new PV interconnection permits must be aware of any risks caused by PV on their distribution networks. One potential risk is the degradation of the effectiveness of the network's protection devices (PDs). This can limit the amount of PV allowed in the network, i.e. the network's PV hosting capacity. This research studies how the size and location of a PV installation can prevent network PDs from operating as intended. Simulations are carried out using data from multiple actual distribution feeders in OpenDSS. The PD TCC are modeled to find the timing of PD tripping to accurately identify when PV will cause unnecessary customer outages. The findings show that more aggressive protection settings limit the amount of PV that can be placed on a network that does not cause more customer outages or damage network equipment.

Most utilities use a standard small generator interconnection procedure (SGIP) process that includes a screen for placing potential PV interconnection requests on a fast track that do not require more detailed study. One common screening threshold is the 15% of peak load screen that fast tracks PV below a certain size. This paper performs a technical evaluation of the screen compared to a large number of simulation results for PV on 40 different feeders. Three error metrics are developed to quantify the accuracy of the screen for identifying interconnections that would cause problems or incorrectly sending a large number of allowable systems for more detailed study.

With increasingly high penetrations of PV on distribution systems, there can be many benefits and impacts to the standard operation of the grid. This paper focuses on voltages below the allowable range caused by the installation of PV on distribution systems with line-drop compensation enabled voltage regulation controls. This paper demonstrates how this type of under-voltage issue has the potential to limit the hosting capacity of PV on a feeder and have possible consequences to other feeders served off a common regulated bus. Some examples of mitigation strategies are presented, along with the shortcomings of each. An example of advanced inverter functionality to mitigate overvoltage is shown, while also illustrating the ineffectiveness of inverter voltage control as a mitigation of under-voltage.

Utilities issuing new PV interconnection permits must be aware of any risks caused by PV on their distribution networks. One potential risk is the degradation of the effectiveness of the network's protection devices (PDs). This can limit the amount of PV allowed in the network, i.e. the network's PV hosting capacity. This research studies how the size and location of a PV installation can prevent network PDs from operating as intended. Simulations are carried out using data from multiple actual distribution feeders in OpenDSS. The PD TCC are modeled to find the timing of PD tripping to accurately identify when PV will cause unnecessary customer outages. The findings show that more aggressive protection settings limit the amount of PV that can be placed on a network that does not cause more customer outages or damage network equipment.