Publications

Results 51–100 of 123

Search results

Jump to search filters

A comprehensive understanding of the efficacy of N-ring SEE hardening methodologies in SiGe HBTs

IEEE Transactions on Nuclear Science

Phillips, Stan D.; Moen, Kurt A.; Najafizadeh, Laleh; Diestelhorst, Ryan M.; Sutton, Akil K.; Cressler, John D.; Vizkelethy, Gyorgy; Dodd, Paul E.; Marshall, Paul W.

We investigate the efficacy of mitigating radiation-based single event effects (SEE) within circuits incorporating SiGe heterojunction bipolar transistors (HBTs) built with an N-Ring, a transistor-level layout-based radiation hardened by design (RHBD) technique. Previous work of single-device ion-beam induced charge collection (IBICC) studies has demonstrated significant reductions in peak collector charge collection and sensitive area for charge collection; however, few circuit studies using this technique have been performed. Transient studies performed with Sandia National Laboratory's (SNL) 36 MeV 16O microbeam on voltage references built with N-Ring SiGe HBTs have shown mixed results, with reductions in the number of large voltage disruptions in addition to new sensitive areas of low-level output voltage disturbances. Similar discrepancies between device-level IBICC results and circuit measurements are found for the case of digital shift registers implemented with N-Ring SiGe HBTs irradiated in a broadbeam environment at Texas A&M's Cyclotron Institute. The error cross-section curve of the N-Ring based register is found to be larger at larger ion LETs than the standard SiGe register, which is clearly counter-intuitive. We have worked to resolve the discrepancy between the measured circuit results and the device-level IBICC measurements, by re-measuring single-device N-Ring SiGe HBTs using a time-resolved ion beam induced charge (TRIBIC) set-up that allows direct capture of nodal transients. Coupling these measurements with full 3-D TCAD simulations provides complete insight into the origin of transient currents in an N-Ring SiGe HBT. The detailed structure of these transients and their bias dependencies are discussed, together with the ramifications for the design of space-borne analog and digital circuits using SiGe HBTs. © 2010 IEEE.

More Details

Design of digital circuits using inverse-mode cascode SiGe HBTs for single event upset mitigation

IEEE Transactions on Nuclear Science

Thrivikraman, Tushar K.; Wilcox, Edward; Phillips, Stanley D.; Cressler, John D.; Marshall, Cheryl; Vizkelethy, Gyorgy; Dodd, Paul E.; Marshall, Paul

We report on the design and measured results of a new SiGe HBT radiation hardening by design technique called the inverse-mode cascode (IMC). A third-generation SiGe HBT IMC device was tested in a time resolved ion beam induced charge collection (TRIBICC) system, and was found to have over a 75% reduction in peak current transients with the use of an n-Tiedown on the IMC sub-collector node. Digital shift registers in a 1st-generation SiGe HBT technology were designed and measured under a heavy-ion beam, and shown to increase the LET threshold over standard npn only shift registers. Using the CREME96 tool, the expected orbital bit-errors/day were simulated to be approximately 70% lower with the IMC shift register. These measured results help demonstrate the efficacy of using the IMC device as a low-cost means for improving the SEE radiation hardness of SiGe HBT technology without increasing area or power. © 2010 IEEE.

More Details

Effects of moisture on radiation-induced degradation in CMOS SOI transistors

Proceedings of the European Conference on Radiation and its Effects on Components and Systems, RADECS

Shaneyfelt, Marty R.; Schwank, James R.; Dodd, Paul E.; Hill, Thomas A.; Swanson, Scot E.

The effects of moisture on radiation-induced charge buildup in the oxides of a 0.35 m SOI technology are explored. Data show no observable effects of moisture-related aging on radiation hardness. These results are in contrast to those of previous work performed on bulk MOS technologies fabricated in the 1980s. The cause of these differences do not appear to be due to differences in final chip passivation layers. Instead, other processing variables (including the use of different implant materials and thicker overlayers) may account for these differences. In any case, the SOI technology results indicate that not all advanced technologies exposed to moisture are necessarily susceptible to significant long-term radiation-induced aging effects. © 2009 IEEE.

More Details

Hardness assurance test guideline for qualifying devices for use in proton environments

IEEE Transactions on Nuclear Science

Schwank, James R.; Shaneyfelt, Marty R.; Dodd, Paul E.; Felix, James A.; Baggio, J.; Ferlet-Cavrois, V.; Paillet, P.; Label, K.A.; Pease, R.L.; Simons, M.; Cohn, L.M.

Proton-induced singl -event effects hardness assurance guidelines are developed to address issues raised by recent test results in advanced IC technologies for use in space environments. Specifically, guidelines are developed that address the effects of proton energy and angle of incidence on single-event latchup and the effects of total dose on single-event upset. The guidelines address both single-event upset (SEU), single-event latchup (SEL), and combined SEU and total ionizing dose (TID) effects. © 2006 IEEE.

More Details

SOI-Enabled MEMS Processes Lead to Novel Mechanical Optical and Atomic Physics Devices Presentation

Herrera, Gilbert V.; McCormick, Frederick B.; Nielson, Gregory N.; Nordquist, Christopher N.; Okandan, Murat O.; Olsson, Roy H.; Ortiz, Keith O.; Platzbecker, Mark R.; Resnick, Paul J.; Shul, Randy J.; Bauer, Todd B.; Sullivan, Charles T.; Watts, Michael W.; Blain, Matthew G.; Dodd, Paul E.; Dondero, Richard D.; Garcia, Ernest J.; Galambos, Paul; Hetherington, Dale L.; Hudgens, James J.

Abstract not provided.

Total ionizing dose and single event effects hardness assurance qualification issues for microelectronics

IEEE Transactions on Nuclear Science

Shaneyfelt, Marty R.; Schwank, James R.; Dodd, Paul E.; Felix, James A.

The radiation effects community has developed a number of hardness assurance test guidelines to assess and assure the radiation hardness of integrated circuits for use in space and/or high-energy particle accelerator applications. These include test guidelines for total dose hardness assurance qualification and single event effects (SEE) qualification. In this work, issues associated with these hardness assurance test guidelines are discussed. For total dose qualification, the main test methodologies used in the U.S. and Europe are reviewed and differences between the guidelines are discussed. In addition, some key issues that must be considered when performing total dose hardness assurance testing are addressed. Following these discussions we review some emerging issues relevant to SEE device qualification that are not covered in present SEE test guidelines. The hardness assurance implications of these issues are addressed. © 2008 IEEE.

More Details

SOI-Enabled MEMS Processes Lead to Novel Mechanical Optical and Atomic Physics Devices

Herrera, Gilbert V.; McCormick, Frederick B.; Nielson, Gregory N.; Nordquist, Christopher N.; Okandan, Murat O.; Olsson, Roy H.; Ortiz, Keith O.; Platzbecker, Mark R.; Resnick, Paul J.; Shul, Randy J.; Bauer, Todd B.; Sullivan, Charles T.; Watts, Michael W.; Blain, Matthew G.; Dodd, Paul E.; Dondero, Richard D.; Garcia, Ernest J.; Galambos, Paul; Hetherington, Dale L.; Hudgens, James J.

Abstract not provided.

Effects of total dose irradiation on single-event upset hardness

IEEE Transactions on Nuclear Science

Schwank, James R.; Shaneyfelt, Marty R.; Felix, James A.; Dodd, Paul E.; Baggio, J.; Ferlet-Cavrois, V.; Paillet, P.; Hash, Gerald L.; Flores, Richard S.; Massengill, L.W.; Blackmore, E.

The effect of total dose on SEU hardness is investigated as a function of temperature and power supply voltage to determine worst-case hardness assurance test conditions for space environments. SRAMs from six different vendors were characterized for single-event upset (SEU) hardness at proton energies from 20 to 500 MeV and at temperatures of 25 and 80°C after total dose irradiating the SRAMs with either protons, Co-60 gamma rays, or low-energy x-rays. It is shown that total dose irradiation and the memory pattern written to the memory array during total dose irradiation and SEU characterization can substantially affect SEU hardness for some SRAMs. For one SRAM, the memory pattern made more than two orders of magnitude difference in SEU cross section at the highest total dose level examined. For all SRAMs investigated, the memory pattern that led to the largest increase in SEU cross section was the same memory pattern that led to the maximum increase in total-dose induced power supply leakage current. In addition, it is shown that increasing the temperature during SEU characterization can also increase the effect of total dose on SEU hardness. As a result, worst-case SEU hardness assurance test conditions are the maximum total dose and temperature of the system environment, and the minimum operating voltage of the SRAM. Possible screens for determining whether or not the SEU cross section of an SRAM will vary with total dose, based on the magnitude of the increase in power supply leakage current with total dose or the variation in SEU cross section with power supply voltage, have been suggested. In contrast to previous works, our results using selective area x-ray irradiations show that the source of the effect of total dose on SEU hardness is radiation-induced leakage currents in the memory cells. The increase in SEU cross section with total dose appears to be consistent with radiation-induced currents originating in the memory cells affecting the output bias levels of bias level shift circuitry used to control the voltage levels to the memory cells and/or due to the lowering of the noise margin of individual memory cells caused by radiation-induced leakage currents. © 2006 IEEE.

More Details

Elimination of enhanced low-dose-rate sensitivity in linear bipolar devices using silicon-carbide passivation

IEEE Transactions on Nuclear Science

Shaneyfelt, Marty R.; Maher, Michael C.; Camilletti, Robert C.; Schwank, James R.; Pease, Ronald L.; Russell, Brian A.; Dodd, Paul E.

The type of final chip passivation layer used to fabricate linear bipolar circuits can have a major impact on the total dose hardness of some circuits. It is demonstrated that National Semiconductor Corporation linear bipolar devices fabricated with only an amorphous silicon carbide passivation layer do not exhibit enhanced low-dose-rate sensitivity (ELDRS), while devices from the same production lot fabricated with other types of passivation layers are ELDRS sensitive. SiC passivation possesses mechanical, electrical and chemical properties that make it compatible with linear device fabrication processes. These properties of SiC passivation layers, combined with the excellent radiation response of devices passivated with SiC, make SiC passivation layers a very attractive choice for devices packaged in either ceramic or plastic-encapsulated packages for use in space environments. © 2006 IEEE.

More Details

Effects of particle energy on proton-induced single-event latchup

IEEE Transactions on Nuclear Science

Schwank, James R.; Shaneyfelt, Marty R.; Baggio, J.; Dodd, Paul E.; Felix, James A.; Ferlet-Cavrois, V.; Paillet, P.; Lambert, D.; Sexton, Frederick W.; Hash, Gerald L.; Blackmore, E.

The effect of proton energy on single-event latchup (SEL) in present-day SRAMs is investigated over a wide range of proton energies and temperature. SRAMs from five different vendors were irradiated at proton energies from 20 to 500 MeV and at temperatures of 25° and 85°C. For the SRAMs and radiation conditions examined in this work, proton energy SEL thresholds varied from as low as 20 MeV to as high as 490 MeV. To gain insight into the observed effects, the heavy-ion SEL linear energy transfer (LET) thresholds of the SRAMs were measured and compared to high-energy transport calculations of proton interactions with different materials. For some SRAMs that showed proton-induced SEL, the heavy-ion SEL threshold LET was as high as 25 MeV-cm 2/mg. Proton interactions with Si cannot generate nuclear recoils with LETs this large. Our nuclear scattering calculations suggest that the nuclear recoils are generated by proton interactions with tungsten. Tungsten plugs are commonly used in most high-density ICs fabricated today, including SRAMs. These results demonstrate that for system applications where latchups cannot be tolerated, SEL hardness assurance testing should be performed at a proton energy at least as high as the highest proton energy present in the system environment. Moreover, the best procedure to ensure that ICs will be latchup free in proton environments may be to use a heavy-ion source with LETs ≥40 MeV-cm 2/mg. © 2005 IEEE.

More Details

Mechanisms and mitigation of single-event effects

Advances in the Astronautical Sciences

Dodd, Paul E.

Physical mechanisms responsible for single-event effects are reviewed, concentrating on silicon MOS devices and digital integrated circuits. A brief historical overview of single-event effects in space and terrestrial systems is given. Single-event upset mechanisms in SRAMs are briefly described, as is the initiation of single-event latchup in CMOS structures. Techniques for mitigating single-event effects are described, including the impact of technology trends on mitigation efficacy. Future challenges are briefly explored.

More Details

Radiation-induced off-state leakage current in commercial power MOSFETs

Proposed for publication in the IEEE Transactions on Nuclear Science.

Felix, James A.; Shaneyfelt, Marty R.; Dodd, Paul E.; Draper, Bruce L.; Schwank, James R.; Dalton, Scott D.

The total dose hardness of several commercial power MOSFET technologies is examined. After exposure to 20 krad(SiO{sub 2}) most of the n- and p-channel devices examined in this work show substantial (2 to 6 orders of magnitude) increases in off-state leakage current. For the n-channel devices, the increase in radiation-induced leakage current follows standard behavior for moderately thick gate oxides, i.e., the increase in leakage current is dominated by large negative threshold voltage shifts, which cause the transistor to be partially on even when no bias is applied to the gate electrode. N-channel devices biased during irradiation show a significantly larger leakage current increase than grounded devices. The increase in leakage current for the p-channel devices, however, was unexpected. For the p-channel devices, it is shown using electrical characterization and simulation that the radiation-induced leakage current increase is related to an increase in the reverse bias leakage characteristics of the gated diode which is formed by the drain epitaxial layer and the body. This mechanism does not significantly contribute to radiation-induced leakage current in typical p-channel MOS transistors. The p-channel leakage current increase is nearly identical for both biased and grounded irradiations and therefore has serious implications for long duration missions since even devices which are usually powered off could show significant degradation and potentially fail.

More Details

Radiation effects microscopy for failure analysis of microelectronic devices

Doyle, Barney L.; Dodd, Paul E.; Shaneyfelt, Marty R.; Schwank, James R.

Microelectronic devices in satellites and spacecraft are exposed to high energy cosmic radiation. Furthermore, Earth-based electronics can be affected by terrestrial radiation. The radiation causes a variety of Single Event Effects (SEE) that can lead to failure of the devices. High energy heavy ion beams are being used to simulate both the cosmic and terrestrial radiation to study radiation effects and to ensure the reliability of electronic devices. Broad beam experiments can provide a measure of the radiation hardness of a device (SEE cross section) but they are unable to pinpoint the failing components in the circuit. A nuclear microbeam is an ideal tool to map SEE on a microscopic scale and find the circuit elements (transistors, capacitors, etc.) that are responsible for the failure of the device. In this paper a review of the latest radiation effects microscopy (REM) work at Sandia will be given. Different SEE mechanisms (Single Event Upset, Single Event Transient, etc.) and the methods to study them (Ion Beam Induced Charge (IBIC), Single Event Upset mapping, etc.) will be discussed. Several examples of using REM to study the basic effects of radiation in electronic devices and failure analysis of integrated circuits will be given.

More Details

Heavy-ion broad-beam and microprobe studies of single-event upsets in 0.20 um SiGe heterojunction bipolar transistors and circuits

Proposed for publication in the IEEE Transactions on Nuclear Science.

Vizkelethy, Gyorgy V.; Dodd, Paul E.

Combining broad-beam circuit level single-event upset (SEU) response with heavy ion microprobe charge collection measurements on single silicon-germanium heterojunction bipolar transistors improves understanding of the charge collection mechanisms responsible for SEU response of digital SiGe HBT technology. This new understanding of the SEU mechanisms shows that the right rectangular parallele-piped model for the sensitive volume is not applicable to this technology. A new first-order physical model is proposed and calibrated with moderate success.

More Details

3D simulation of heavy-ion induced charge collection in SiGe HBTs

Proposed for publication in IEEE Transactions on Nuclear Science.

Vizkelethy, Gyorgy V.; Dodd, Paul E.

This paper presents the first 3-D simulation of heavy-ion induced charge collection in a SiGe HBT, together with microbeam testing data. The charge collected by the terminals is a strong function of the ion striking position. The sensitive area of charge collection for each terminal is identified based on analysis of the device structure and simulation results. For a normal strike between the deep trench edges, most of the electrons and holes are collected by the collector and substrate terminals, respectively. For an ion strike between the shallow trench edges surrounding the emitter, the base collects appreciable amount of charge. Emitter collects negligible amount of charge. Good agreement is achieved between the experimental and simulated data. Problems encountered with mesh generation and charge collection simulation are also discussed.

More Details

Radiation-induced charge trapping in thin Al2O3/SiOxNy/Si(100) gate dielectric stacks

Proposed for publication in IEEE Transactions on Nuclear Science.

Felix, James A.; Shaneyfelt, Marty R.; Meisenheimer, Timothy L.; Schwank, James R.; Dodd, Paul E.

We examine the total-dose radiation response of capacitors and transistors with stacked Al{sub 2}O{sub 3} on oxynitride gate dielectrics with Al and poly-Si gates after irradiation with 10 keV X-rays. The midgap voltage shift increases monotonically with dose and depends strongly on both Al{sub 2}O{sub 3} and SiO{sub x}N{sub y} thickness. The thinnest dielectrics, of most interest to industry, are extremely hard to ionizing irradiation, exhibiting only {approx}50 mV of shift at a total dose of 10 Mrad(SiO{sub 2}) for the worst case bias condition. Oxygen anneals are found to improve the total dose radiation response by {approx}50% and induce a small amount of capacitance-voltage hysteresis. Al{sub 2}O{sub 3}/SiO{sub x}N{sub y} dielectrics which receive a {approx}1000 C dopant activation anneal trap {approx}12% more of the initial charge than films annealed at 550 C. Charge pumping measurements show that the interface trap density decreases with dose up to 500 krad(SiO{sub 2}). This surprising result is discussed with respect to hydrogen effects in alternative dielectric materials, and may be the result of radiation-induced hydrogen passivation of some of the near-interfacial defects in these gate dielectrics.

More Details
Results 51–100 of 123
Results 51–100 of 123