Publications

Abstract not provided.

Many experimenters at the Annular Core Research Reactor (ACRR) have a need to predict the neutron/gamma environment prior to testing. In some cases, the neutron/gamma environment is needed to understand the test results after the completion of an experiment. In an effort to satisfy the needs of experimenters, a model of the ACRR was developed for use with the Monte Carlo N-Particle transport codes MCNP [Br03] and MCNPX [Wa02]. The model contains adjustable safety, transient, and control rods, several of the available spectrum-modifying cavity inserts, and placeholders for experiment packages. The ACRR model was constructed such that experiment package models can be easily placed in the reactor after being developed as stand-alone units. An addition to the 'standard' model allows the FREC-II cavity to be included in the calculations. This report presents the MCNP/MCNPX model of the ACRR. Comparisons are made between the model and the reactor for various configurations. Reactivity worth curves for the various reactor configurations are presented. Examples of reactivity worth calculations for a few experiment packages are presented along with the measured reactivity worth from the reactor test of the experiment packages. Finally, calculated neutron/gamma spectra are presented.

Benchmark experiments using spherical test objects were performed in the central cavity of Sandia National Laboratories' Annular Core Research Reactor. The experiments were performed with 10.16 cm and 17.78 cm diameter aluminum (Al6061) and high-density polyethylene spheres that were essentially solid with cavities scrolled out along the equator to allow the insertion of activation foils and/or sulfur pellets. The neutron monitor foils were selected to cover a wide range of reaction energies. The reactor environments were modeled in detail using Monte Carlo N-Particle eXtended (MCNPX). The experimental results were compared to the Monte Carlo calculations of the reaction rates of each of the foils at various depths in the spheres produced by MCNPX. The comparison includes a complete treatment of the uncertainties. Copyright © 2006 by ASTM International.

The Radiation Effects Sciences (RES) program is responsible for conducting Neutron Gamma Energy Transport (NuGET) code validation. In support of this task, a series of experiments were conducted in the annular core research reactor (ACRR) to investigate the modification of the incident neutron/gamma environment by aluminum (Al6061) and high-density polyethylene (HDPE) spheres with 4-in and 7-in-diameter. The experiment series described in this report addresses several NuGET validation concerns. The validation experiment series also addresses the design and execution of proper reactor testing to match the hostile radiation environments and to match the component stresses that arise from the hostile radiation environments. This report summarizes the RES Validation: n/{gamma} Attenuation through Materials, Environments 1A, experiments conducted at the ACRR in FY 2003 using ACRR Experiment Plans 933 and 949.

High fidelity active dosimetry in the mixed neutron/gamma field of a research reactor is a very complex issue. For passive dosimetry applications, the use of activation foils addresses the neutron environment while the use of low neutron response CaF2:Mn thermoluminescent dosimeters (TLDs) addresses the gamma environment. While radiation-hardened diamond photoconducting detectors (PCD) have been developed that provide a very precise fast response (picosecond) dosimeter and can provide a time-dependent profile for the radiation environment, the mixed field response of the PCD is still uncertain and this interferes with the calibration of the PCD response. In order to address the research reactor experimenter's need for a dosimeter that reports silicon dose and dose rate at a test location during a pulsed reactor operation, a silicon calorimeter has been developed. This dosimeter can be used by itself to provide a dose in rad(Si) up to a point in a reactor pulsed operation, or, in conjunction with the diamond PCD, to provide a dose rate. This paper reports on the development, testing, and validation of this silicon calorimeter for applications in water-moderated research reactors. Copyright © 2006 by ASTM International.

Abstract not provided.

Thermoluminescent dosimeters (TLDs), particularly CaF2:Mn, are often used as photon dosimeters in mixed (n/γ) field environments. In these mixed field environments, it is desirable to separate the photon response of a dosimeter from the neutron response. For passive dosimeters that measure an integral response, such as TLDs, the separation of the two components must be performed by postexperiment analysis because the TLD reading system cannot distinguish between photon- and neutron-produced response. Using a model of an aluminum-equilibrated TLD-400 (CaF2:Mn) chip, a systematic effort has been made to analytically determine the various components that contribute to the neutron response of a TLD reading. The calculations were performed for five measured reactor neutron spectra and one theoretical thermal neutron spectrum. The five measured reactor spectra all have experimental values for aluminum-equilibrated TLD-400 chips. Calculations were used to determine the percentage of the total TLD response produced by neutron interactions in the TLD and aluminum equilibrator. These calculations will aid the Sandia National Laboratories-Radiation Metrology Laboratory (SNL-RML) in the interpretation of the uncertainty for TLD dosimetry measurements in the mixed field environments produced by SNL reactor facilities.

Thermoluminescent dosimeters (TLDs), particularly CaF{sub 2}:Mn, are often used as photon dosimeters in mixed (n/{gamma}) field environments. In these mixed field environments, it is desirable to separate the photon response of a dosimeter from the neutron response. For passive dosimeters that measure an integral response, such as TLDs, the separation of the two components must be performed by post-experiment analysis because the TLD reading system cannot distinguish between photon and neutron produced response. Using a model of an aluminum-equilibrated TLD-400 chip, a systematic effort has been made to analytically determine the various components that contribute to the neutron response of a TLD reading. The calculations were performed for five measured reactor neutron spectra and one theoretical thermal neutron spectrum. The five measured reactor spectra all have dosimetry quality experimental values for aluminum-equilibrated TLD-400 chips. Calculations were used to determined the percentage of the total TLD response produced by neutron interactions in the TLD and aluminum equilibrator. These calculations will aid the Sandia National Laboratories-Radiation Metrology Laboratory (SNL-RML) in the interpretation of the uncertainty for TLD dosimetry measurements in the mixed field environments produced by SNL reactor facilities.