Publications Details
Inductively Coupled Plasma Etching of III-V Semiconductors in BCl(3)-Based Chemistries: Part II: InP, InGaAs, InGaAsP, InAs and AllnAs
A parametric study of etch rates and surface morphologies of In-containing compound semiconductors (InP, InGaAs, InGaAsP, InAs and AlInAs) obtained by BClj-based Inductively Coupled Plasmas is reported. Etch rates in the range 1,500-3,000 &min. are obtained for all the materials at moderate source powers (500 W), with the rates being a strong function of discharge composition, rf chuck power and pressure. Typical root-mean-square surface roughness of-5 nm were obtained for InP, which is worse than the values obtained for Ga-based materials under the same conditions (-1 run). The near surface of etched samples is typically slightly deficient in the group V element, but the depth of this deficiency is small (a few tens of angstroms).