
Atmospheric corrosion is a critical materials degradation problem, yet the ability to predict its kinetics remains elusive. Conventional approaches provide no information about how localized damage evolves, giving limited predictive capabilities in common scenarios. The goal of this Sandia LDRD team was to employ in-situ X-ray computed tomography to directly observe how corrosion damage evolves, enabling the mechanistic relationships between environmental drivers, microstructural triggers, and the kinetics of atmospheric corrosion to be uncovered. To exploit the insights held within hundreds of 3D datasets, custom machine-vision algorithms were developed to automatically identify critical features. Ohio State University conducted electrochemical experiments to unravel these relationships and revealed that corrosion rates are closely tied to the evolution of the electrolyte and the local microstructure, enabling the development of predictive tools for Sandia missions. Other academic collaborators who contributed to this work were Sandia Alliance partners Georgia Tech and the University of Texas at Austin. This work has resulted in five journal publications including one in npj Materials Degradation, one in Corrosion – The Journal of Science & Engineering, and two in Journal of The Electrochemical Society, and four presentations.
Sandia researchers linked to work
- Philip Noell
- Matthew Smith
- Michael Melia
- Remi Dingreville
Sponsored by


Associated Publications
-
Polonsky, A., Martinez, C., Appleby, C., Bernard, S., Griego, J., Noell, P., Pathare, P., & Pathare, P. (2022). Super-Resolution Approaches in Three-Dimensions for Classification and Screening of Commercial-Off-The-Shelf Components. https://doi.org/10.2172/1890107 Publication ID: 80307
-
Ehler, E., Dhiman, D., Dillard, D., Dingreville, R., Barrick, E., Kustas, A., Tomar, T., & Tomar, T. (2022). High-Strain Rate Spall Strength Measurement for CoCrFeMnNi High-Entropy Alloy. Metals, 12(9). https://doi.org/10.3390/met12091482 Publication ID: 80220
-
Oommen, O., Shukla, S., Goswami, G., Dingreville, R., Karniadakis, K., & Karniadakis, K. (2022). Learning two-phase microstructure evolution using neural operators and autoencoder architectures. npj Computational Materials, 8(1). https://doi.org/10.1038/s41524-022-00876-7 Publication ID: 80079
-
Fernandez, F., Dingreville, R., Spearot, S., & Spearot, S. (2022). Statistical perspective on embrittling potency for intergranular fracture. Physical Review Materials, 6(8). https://doi.org/10.1103/physrevmaterials.6.083602 Publication ID: 80045
-
Elmslie, T., Startt, J., Soto-Medina, S., Fen, K., Zappala, E., Frandsen, B., Meisel, &., Dingreville, R., Hamlin, J., & Hamlin, J. (2022). Magnetic properties of equiatomic CrMnFeCoNi. Physical Review. B, 106(1). https://doi.org/10.1103/physrevb.106.014418 Publication ID: 80913
-
Vizoso, D., Deo, D., Dingreville, R., & Dingreville, R. (2022). The effects of dose, dose rate, and irradiation type and their equivalence on radiation-induced segregation in binary alloy systems via phase-field simulations. Journal of Nuclear Materials, 569. https://doi.org/10.1016/j.jnucmat.2022.153924 Publication ID: 80010
-
Noell, P., Deka, N., Sills, R.B., Boyce, B., & Boyce, B. (2022). Identifying the microstructural features associated with void nucleation during elevated-temperature deformation of copper. Fatigue and Fracture of Engineering Materials and Structures, 45(7), pp. 1882-1899. https://doi.org/10.1111/ffe.13707 Publication ID: 80867
-
Barr, C., Chen, E., Nathaniel, J., Lu, P., Adams, D., Dingreville, R., Boyce, B., Hattar, K., Medlin, D., & Medlin, D. (2022). Irradiation-induced grain boundary facet motion: In situ observations and atomic-scale mechanisms. Science Advances, 8(23). https://doi.org/10.1126/sciadv.abn0900 Publication ID: 80682
-
Chen, C., Dingreville, R., Richeton, R., Berbenni, B., & Berbenni, B. (2022). Invariant surface elastic properties in FCC metals and their correlation to bulk properties revealed by machine learning methods. Journal of the Mechanics and Physics of Solids, 163. https://doi.org/10.1016/j.jmps.2022.104852 Publication ID: 80521
-
Kalidindi, K., Buzzy, B., Boyce, B., Dingreville, R., & Dingreville, R. (2022). Digital Twins for Materials. Frontiers in Materials, 9. https://doi.org/10.3389/fmats.2022.818535 Publication ID: 79997
-
Monismith, S., Qu, J., Dingreville, R., & Dingreville, R. (2022). Grain-boundary fracture mechanisms in Li7La3Zr2O12 (LLZO) solid electrolytes: When phase transformation acts as a temperature-dependent toughening mechanism. Journal of the Mechanics and Physics of Solids, 160. https://doi.org/10.1016/j.jmps.2022.104791 Publication ID: 79961
-
Marshall, R.S., Katona, R., Melia, M.A., Kelly, R.G., & Kelly, R.G. (2022). Pit Stability Predictions of Additively Manufactured SS316 Surfaces Using Finite Element Analysis. Journal of the Electrochemical Society, 169(2). https://doi.org/10.1149/1945-7111/ac519d Publication ID: 79944
-
Hanson, K., Sankar, K.M., Weck, P., Startt, J., Dingreville, R., Deo, C.S., Sugar, J., Singh, P.M., & Singh, P.M. (2022). Effect of excess Mg to control corrosion in molten MgCl2 and KCl eutectic salt mixture. Corrosion Science, 194. https://doi.org/10.1016/j.corsci.2021.109914 Publication ID: 76654
-
Karasz, E., Taylor, J.M., Autenrieth, D.M., Reu, P.L., Johnson, K., Melia, M.A., Noell, P., & Noell, P. (2022). Measuring the Residual Stress and Stress Corrosion Cracking Susceptibility of Additively Manufactured 316L by ASTM G36-94. Corrosion, 78(1), pp. 3-12. https://doi.org/10.5006/3894 Publication ID: 79805
-
Melia, M.A. (2021). Part-to-part and machine-to-machine variability in corrosion and roughness properties of additively manufactured stainless steel [Conference Presenation]. https://doi.org/10.2172/1899520 Publication ID: 76501
-
Echeverria, M.J., Galitskiy, S., Mishra, A., Dingreville, R., Dongare, A.M., & Dongare, A.M. (2021). Understanding the plasticity contributions during laser-shock loading and spall failure of Cu microstructures at the atomic scales. Computational Materials Science, 198. https://doi.org/10.1016/j.commatsci.2021.110668 Publication ID: 78944
-
Alberdi, R., Robbins, J., Walsh, T., Dingreville, R., & Dingreville, R. (2021). Exploring wave propagation in heterogeneous metastructures using the relaxed micromorphic model. Journal of the Mechanics and Physics of Solids, 155. https://doi.org/10.1016/j.jmps.2021.104540 Publication ID: 79073
-
Pegues, J., Melia, M.A., Rodriguez, M.A., Babuska, T., Gould, B., Argibay, N., Greco, A., Kustas, A., & Kustas, A. (2021). In situ synchrotron X-ray imaging and mechanical properties characterization of additively manufactured high-entropy alloy composites. Journal of Alloys and Compounds, 876. https://doi.org/10.1016/j.jallcom.2021.159505 Publication ID: 78854
-
Desai, S., Dingreville, R., & Dingreville, R. (2021). Model-informed, Adaptive Physical Vapor Deposition to Fabricate Hierarchical Binary-alloy Thin-films. https://doi.org/10.2172/1819814 Publication ID: 75589
-
Susan, D., Noell, P., McKenzie, B., Dickens, S., & Dickens, S. (2021). SEM/EBSD Analysis of Deformation and Determination of Dislocation Density [Conference Presenation]. https://doi.org/10.2172/1886188 Publication ID: 75477
-
Boyce, B., Garland, A., White, B.C., Jared, B.H., Conway, K., Adstedt, K., Dingreville, R., Robbins, J., Walsh, T., Alvis, T., Branch, B., Kaehr, B., Kunka, C., Leathe, N., & Leathe, N. (2021). Multimode Metastructures: Novel Hybrid 3D Lattice Topologies. https://doi.org/10.2172/1819411 Publication ID: 75540
-
Dingreville, R., Bielejec, E.S., Chen, E., Deo, D., Kim, K., Spearot, S., Startt, J., Stewart, J., Sugar, J., Vizoso, V., Weck, P., Young, J.M., & Young, J.M. (2021). Multi-Resolution Characterization of the Coupling Effects of Molten Salts, High Temperature and Irradiation on Intergranular Fracture. https://doi.org/10.2172/1821254 Publication ID: 75597
-
Monti, J., Stewart, J., Dingreville, R., & Dingreville, R. (2021). Phase-Field Modeling of Physical Vapor Deposition of Polycrystalline Thin Films [Conference Poster]. https://doi.org/10.2172/1888996 Publication ID: 75746
-
Hu, C., Medlin, D., Dingreville, R., & Dingreville, R. (2021). Disconnection-Mediated Transition in Segregation Structure at Twin Boundaries: A Molecular Dynamic Simulation of Platinum-Gold System [Conference Poster]. https://doi.org/10.2172/1888398 Publication ID: 75768
-
Desai, S., Dingreville, R., & Dingreville, R. (2021). Designing thin film microstructures using genetic algorithms [Conference Poster]. https://doi.org/10.2172/1890915 Publication ID: 75769
-
Quasi, M., Jackson, N., Dingreville, R., & Dingreville, R. (2021). Optimizing the piezoelectric response in AlN thin-films via high-throughput ab-initio perturbation theory simulations [Conference Poster]. https://doi.org/10.2172/1888687 Publication ID: 75773
-
Srinivasan, J., Noell, P., Melia, M.A., Schindelholz, E., & Schindelholz, E. (2021). The role of chloride concentration on the pitting kinetics of aluminum [Conference Presenation]. https://doi.org/10.2172/1890390 Publication ID: 75943
-
Melia, M.A., Duran, J.G., Taylor, J.M., Presuel-Moreno, F., Schaller, R.F., Schindelholz, E.J., & Schindelholz, E.J. (2021). Marine Atmospheric Corrosion of Additively Manufactured Stainless Steels. Corrosion, 77(9), pp. 1003-1013. https://doi.org/10.5006/3793 Publication ID: 77973
-
Melia, M.A. (2021). Part-to-part and machine-to-machine variability in corrosion and roughness properties of additively manufactured stainless steel [Conference Presenation]. https://doi.org/10.2172/1888454 Publication ID: 75266
-
Dingreville, R. (2021). Phase-field modeling of thin-film microstructures: A theoretical platform for understanding and designing functional nanostructured materials [Conference Presenation]. https://doi.org/10.2172/1888127 Publication ID: 79716
-
Hu, C., Medlin, D., Dingreville, R., & Dingreville, R. (2021). Disconnection-Mediated Transition in Segregation Structures at Twin Boundaries. Journal of Physical Chemistry Letters, 12(29), pp. 6875-6882. https://doi.org/10.1021/acs.jpclett.1c02189 Publication ID: 79372
-
Deitz, J., Ruggles, T., Noell, P., Susan, D., Michael, J., & Michael, J. (2021). Failure Analysis in FeCo Magnetic Alloys through Electron Channeling Contrast Imaging Defect Characterization [Conference Presenation]. https://doi.org/10.2172/1888124 Publication ID: 79304
-
Dingreville, R. (2021). Minisymposium summer 2021 for CINT Research Initiative Program [Presentation]. https://www.osti.gov/biblio/1882303 Publication ID: 79439
-
Johnson, K., Maestas, D., Noell, P., Lim, H., Emery, J., Smith, M., Martinez, C., Davis, W., & Davis, W. (2021). Predicting Mechanical Performance in Additive Manufacturing Components Using Deep Learning [Conference Presenation]. https://doi.org/10.2172/1882109 Publication ID: 79607
-
Mishra, A., Kunka, C., Dingreville, R., Dongare, A., & Dongare, A. (2021). Fingerprinting shock-induced deformations via diffraction. Scientific Reports, 11(1). https://doi.org/10.1038/s41598-021-88908-y Publication ID: 78298
-
Dingreville, R. (2021). Decoding microstructure statistics from diffractograms via atomistic simulations and machine learning [Conference Presenation]. https://doi.org/10.2172/1867348 Publication ID: 78384
-
Noell, P., Karasz, E., Johnson, K., Melia, M.A., & Melia, M.A. (2021). Evaluating Stress-Corrosion Cracking Susceptibility of Additively Manufactured 316L Summary slides [Conference Presenation]. https://doi.org/10.2172/1867563 Publication ID: 78395
-
Marshall, R., Katona, R., Melia, M.A., Kelly, R., & Kelly, R. (2021). Predicting Pit Stability On Additively Manufactured SS316 Via Finite Element Modeling (Initial Draft) [Slides] [Conference Presenation]. https://doi.org/10.2172/1847221 Publication ID: 77308
-
Marshall, R., Katona, R., Kelly, R., Melia, M.A., & Melia, M.A. (2021). Predicting Pit Stability On Additively Manufactured SS316 Via Finite Element Modeling [Slides] [Conference Presenation]. https://doi.org/10.2172/1854685 Publication ID: 77499
-
Taylor, J.M., Melia, M.A., & Melia, M.A. (2021). Disinfectant corrosivity with shipboard HY80 steel [Conference Presenation]. https://doi.org/10.2172/1854309 Publication ID: 77451
-
Taylor, J.M., Duran, J.G., Karasz, E., Schaller, R.F., Johnson, K., Noell, P., Schindelholz, E., Melia, M.A., & Melia, M.A. (2021). Additively manufactured stainless steel susceptibility to localized corrosion and stress corrosion cracking [Conference Presenation]. https://doi.org/10.2172/1854434 Publication ID: 77477
-
Vizoso, D., Deo, C., Dingreville, R., & Dingreville, R. (2021). Phase Field Modeling of Radiation-Induced Segregation [Conference Poster]. https://doi.org/10.2172/1856469 Publication ID: 77719
-
San Marchi, C., Ronevich, J., Dingreville, R., Starr, M., Jungjohann, K.L., & Jungjohann, K.L. (2021). Investigation of the Structural Implications of Hydrogen in Natural Gas Infrastructure [Presentation]. https://www.osti.gov/biblio/1856470 Publication ID: 77720
-
Yu, F., Kacher, J., Noell, P., & Noell, P. (2021). Correlating pit nucleation to dislocation network and microstructural defects by high-throughput scanning electron microscopy [Conference Poster]. https://doi.org/10.2172/1859846 Publication ID: 77788
-
Hanson, K., Sankar, K., Weck, P., Startt, J., Dingreville, R., Deo, C., Sugar, J., Singh, P., & Singh, P. (2021). Effect of Excess Mg to Control Corrosion in Molten MgCl2 and KCl Eutectic Salt Mixture [Conference Poster]. https://doi.org/10.2172/1861022 Publication ID: 77862
-
Srinivasan, J., Weirich, T.D., Marino, G.A., Annerino, A.R., Taylor, J.M., Noell, P., Griego, J., Schaller, R.F., Bryan, C.R., Locke, J.S., Schindelholz, E.J., & Schindelholz, E.J. (2021). Long-Term Effects of Humidity on Stainless Steel Pitting in Sea Salt Exposures. Journal of the Electrochemical Society, 168(2). https://doi.org/10.1149/1945-7111/abdc75 Publication ID: 75182
-
Melia, M.A., Pegues, J., Puckett, R., Whetten, S., Jones, M., Argibay, N., Kustas, A., & Kustas, A. (2021). Exploring the Structure property Relationships of ( Ti x CoCrFeMnNi Graded High Entropy Alloy [Conference Presenation]. https://doi.org/10.2172/1847456 Publication ID: 77291
-
Melia, M.A., Duran, J.G., Marshall, R., Katona, R., Schaller, R.F., Rodelas, J., Heiden, M.J., Jared, B.H., Kelly, R., Schindelholz, E., & Schindelholz, E. (2021). Localized Corrosion of Additively Manufactured Stainless Steels [Conference Presenation]. https://doi.org/10.2172/1847457 Publication ID: 77292
-
Melia, M.A., Schindelholz, E., Rodelas, J., Barr, C., Jared, B.H., Kotula, P., & Kotula, P. (2021). Melt Pool Boundaries and the Corrosion of Laser Powder Fusion Stainless Steels [Conference Presenation]. https://doi.org/10.2172/1847458 Publication ID: 77293
-
Montes de Oca Zapiain, D., Stewart, J., Dingreville, R., & Dingreville, R. (2021). Accelerating phase-field-based microstructure evolution predictions via surrogate models trained by machine learning methods. npj Computational Materials, 7(1). https://doi.org/10.1038/s41524-020-00471-8 Publication ID: 71926
-
Bellotti, A., Kim, J.-Y., Bishop, J., Jared, B.H., Johnson, K., Susan, D., Noell, P., Jacobs, L.J., & Jacobs, L.J. (2021). Nonlinear ultrasonic technique for the characterization of microstructure in additive materials. Journal of the Acoustical Society of America, 149(1), pp. 158-166. https://doi.org/10.1121/10.0002960 Publication ID: 72255
-
Noell, P., Griego, J.J.M., & Griego, J.J.M. (2021). Executive Micro-CT high-resolution Summary for Catheter Part [Slides]. https://doi.org/10.2172/1763595 Publication ID: 75003
-
Dingreville, R. (2021). Accelerating phase-field based predictions via surrogate models trained by machine learning methods [Conference Presenation]. https://doi.org/10.2172/1843647 Publication ID: 75200
-
Cellini, F., Lavini, F., Chen, E., Bongiorno, A., Popovic, F., Hartman, R., Dingreville, R., Riedo, E., & Riedo, E. (2020). Pressure‐Induced Formation and Mechanical Properties of 2D Diamond Boron Nitride. Advanced Science, 8(2). https://doi.org/10.1002/advs.202002541 Publication ID: 71925
-
Rupp, R.E., Noell, P., Taleff, E.M., & Taleff, E.M. (2020). Creep Deformation and Dynamic Grain Growth in an Interstitial-Free Steel. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 51(12), pp. 6167-6183. https://doi.org/10.1007/s11661-020-06014-6 Publication ID: 73048
-
Noell, P., Schindelholz, E.J., Melia, M.A., & Melia, M.A. (2020). Revealing the growth kinetics of atmospheric corrosion pitting in aluminum via in situ microtomography. npj Materials Degradation, 4(1). https://doi.org/10.1038/s41529-020-00136-3 Publication ID: 73736
-
Schindelholz, E., Spoerke, E., Grunlan, J., Melia, M.A., Percival, S.J., Qin, S., Barrick, E., Alexander, C., Nelson, D., & Nelson, D. (2020). Ultrathin corrosion barrier films enabled by layer-by-layer polymer clay nanocomposites [Conference Poster]. https://www.osti.gov/biblio/1822303 Publication ID: 70942
-
Stewart, J., Modine, N., Dingreville, R., & Dingreville, R. (2020). Re-examining the silicon self-interstitial charge states and defect levels: A density functional theory and bounds analysis study. AIP Advances, 10(9). https://doi.org/10.1063/5.0016134 Publication ID: 74461
-
Schaller, R.F., Melia, M.A., Bocher, F., & Bocher, F. (2020). Oxidation Behavior of Additively Manufactured 316L in a Supercritical CO2 Environment [Conference Poster]. https://www.osti.gov/biblio/1821086 Publication ID: 74865
-
Boyce, B., Noell, P., & Noell, P. (2020). The mechanisms of ductile fracture [Presentation]. https://www.osti.gov/biblio/1821286 Publication ID: 74891
-
Chen, E., Dingreville, R., Lavini, F., Riedo, E., & Riedo, E. (2020). Pressure-induced Formation and Mechanical Properties of 2D Diamond Boron Nitride [Conference Poster]. https://www.osti.gov/biblio/1821287 Publication ID: 74892
-
Melia, M.A., Schindelholz, E., Noell, P., & Noell, P. (2020). Corrosion kinetics and pit morphology of pure aluminum during atmospheric corrosion by in-operando microtomography [Conference Poster]. https://www.osti.gov/biblio/1821824 Publication ID: 74944
-
Melia, M.A., Pegues, J., Summers, K., Jones, M., Nation, B., Argibay, N., Kustas, A., & Kustas, A. (2020). Additive Manufacturing to Compositionally Grade Metals for High Throughput Alloy Screening [Conference Poster]. https://www.osti.gov/biblio/1821835 Publication ID: 74956
-
Skelton Marshall, R., Katona, R., Melia, M.A., Kelly, R., & Kelly, R. (2020). Finite Element Modeling of SS316 Pit Stability with respect to Geometry Parameters Under Atmospheric Conditions [Conference Poster]. https://www.osti.gov/biblio/1821836 Publication ID: 74958
-
Dingreville, R., Montes de Oca Zapiain, D., Stewart, J., & Stewart, J. (2020). Accelerating phase-field based predictions via surrogate models trained by machine learning methods [Conference Poster]. https://www.osti.gov/biblio/1812455 Publication ID: 74385
-
Dingreville, R. (2020). Accelerating phase-field based predictions: A case study with surrogate models trained using machine learning methods [Presentation]. https://www.osti.gov/biblio/1813720 Publication ID: 74514
-
Dingreville, R., Montes de Oca Zapiain, D., Stewart, J., & Stewart, J. (2020). Accelerating phase-field based predictions via surrogate models trained by machine learning methods [Presentation]. https://www.osti.gov/biblio/1808265 Publication ID: 74056
-
Melia, M.A., Whetten, S., Puckett, R., Jones, M., Heiden, M.J., Argibay, N., Kustas, A., & Kustas, A. (2020). High-throughput additive manufacturing and characterization of refractory high entropy alloys. Applied Materials Today, 19. https://doi.org/10.1016/j.apmt.2020.100560 Publication ID: 72951
-
Noell, P., Pathare, P., Casias, Z., Huber, T., Laing, J., Carroll, J.D., & Carroll, J.D. (2020). Mechanical testing of PH13-8Mo H950 Steel for Xue-Wierzbicki Fracture Criterion Determination at 20° C and -40° C. https://doi.org/10.2172/1814080 Publication ID: 73737
-
Noell, P., Rodelas, J., Ghanbari, Z., Laursen, C., & Laursen, C. (2020). Microstructural modification of additively manufactured metals by electropulsing. Additive Manufacturing, 33. https://doi.org/10.1016/j.addma.2020.101128 Publication ID: 66606
-
Dingreville, R., Stewart, J., Chen, E., & Chen, E. (2020). Benchmark problems for the Mesoscale Multiphysics Phase Field Simulator (MEMPHIS). https://doi.org/10.2172/1615889 Publication ID: 73262
-
Dingreville, R. (2020). Mesoscale Multiphysics Phase Field Simulator (MEMPHIS): Recent progresses in phase-field modeling at Sandia National Laboratories [Conference Poster]. https://www.osti.gov/biblio/1779038 Publication ID: 73303
-
Duran, J.G., Melia, M.A., & Melia, M.A. (2020). Influence of build orientation and surface finish on the corrosion of additively manufactured 316L stainless steel [Conference Poster]. https://www.osti.gov/biblio/1770274 Publication ID: 72974
-
Noell, P., Sabisch, J., Medlin, D., Boyce, B., & Boyce, B. (2020). Nanoscale conditions for ductile void nucleation in copper: Vacancy condensation and the growth-limited microstructural state. Acta Materialia, 184, pp. 211-224. https://doi.org/10.1016/j.actamat.2019.11.022 Publication ID: 70118
-
Kunka, C., Boyce, B., Foiles, M., Dingreville, R., & Dingreville, R. (2020). Revealing Inconsistencies in X-ray Width Methods for Nanomaterials [Conference Poster]. https://doi.org/10.1039/C9NR08268A Publication ID: 72477
-
Noell, P., Sabisch, J., Medlin, D., Boyce, B., & Boyce, B. (2020). The critical microstructural conditions for void nucleation during ductile rupture: dislocation structures and vacancy condensation [Conference Poster]. https://www.osti.gov/biblio/1766684 Publication ID: 72568
-
Pegues, J., Melia, M.A., Whetten, S., Argibay, N., Kustas, A., & Kustas, A. (2020). Additive Manufacturing of Bulk Refractory High Entropy Alloys with Tailored Mechanical Properties [Conference Poster]. https://www.osti.gov/biblio/1766929 Publication ID: 72651
-
Laursen, C., Carroll, J.D., Noell, P., DeJong, S., Exil, A., & Exil, A. (2020). Linking Porosity Characteristics to the Mechanical Properties of Additively Manufactured AlSi10Mg [Conference Poster]. https://www.osti.gov/biblio/1767383 Publication ID: 72736
-
Spoerke, E., Peretti, A., Percival, S.J., Small, L., Gross, M., Schindelholz, E., Melia, M.A., Rempe, S., Nelson, D., Russo, S., hill, R., Cheng, Y., & Cheng, Y. (2020). Controlling Ion Transport in Multilayered Polymer Composites [Conference Poster]. https://www.osti.gov/biblio/1768365 Publication ID: 72813
-
Kustas, A., Melia, M.A., Whetten, S., Michael, J., Argibay, N., Chandross, M., & Chandross, M. (2020). Rapid exploration of Compositionally Complex Alloys via Additive Manufacturing and Molecular Dynamics [Conference Poster]. https://www.osti.gov/biblio/1768729 Publication ID: 72833
-
Noell, P., Sabisch, J., Medlin, D., Boyce, B., & Boyce, B. (2020). The Critical Microstructural Conditions Leading to the Formation of Voids During Ductile Rupture [Conference Poster]. https://www.osti.gov/biblio/1760995 Publication ID: 70664
-
Whetten, S., Puckett, R., Casey, D., Melia, M.A., Kustas, A., & Kustas, A. (2020). Process Development for the In-Situ Mixing of Multi Material Feed Stock in Additive Manufacturing [Presentation]. https://www.osti.gov/biblio/1762580 Publication ID: 70822
-
Kustas, A., Melia, M.A., Whetten, S., Puckett, R., Jones, M., Heiden, M.J., Argibay, N., & Argibay, N. (2020). Rapid exploration of refractory complex concentrated alloys via additive manufacturing [Presentation]. https://www.osti.gov/biblio/1763165 Publication ID: 70860
-
Montes de Oca Zapiain, D., Stewart, J., Dingreville, R., & Dingreville, R. (2019). Accelerated Microstructure Evolution Predictions Using Machine Learning Based Reduced Order Models [Conference Poster]. https://www.osti.gov/biblio/1643393 Publication ID: 66883
-
Dingreville, R. (2019). Influence of Structure and Chemistry on the Radiation Resistance of Boundaries [Conference Poster]. https://www.osti.gov/biblio/1888649 Publication ID: 66922
-
Croom, B.P., Jin, H., Noell, P., Boyce, B., Li, X., & Li, X. (2019). Collaborative ductile rupture mechanisms of high-purity copper identified by in situ X-ray computed tomography. Acta Materialia, 181, pp. 377-384. https://doi.org/10.1016/j.actamat.2019.10.005 Publication ID: 68006
-
Spoerke, E., Peretti, A., Percival, S.J., Small, L., Gross, M., Schindelholz, E., Melia, M.A., Rempe, S., Nelson, D., Russo, S., & Russo, S. (2019). The Ion Seeps Tonight: Assessing Ionic Transport in Multilayered Nanocomposites [Conference Poster]. https://www.osti.gov/biblio/1643247 Publication ID: 66212
-
Dingreville, R. (2019). Microstructure Morphology of Bicontinuous Nanocomposites Thin-Films During Physical Vapor Deposition (PVD) [Presentation]. https://www.osti.gov/biblio/1646411 Publication ID: 66580
-
Noell, P., Taleff, E.M., & Taleff, E.M. (2019). Subgrains, Texture Evolution, and Dynamic Abnormal Grain Growth in a Mo Rod Material. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 50(10), pp. 4608-4619. https://doi.org/10.1007/s11661-019-05370-2 Publication ID: 60048
-
Chen, E., Deo, C., Dingreville, R., & Dingreville, R. (2019). Accelerated Atomistic Simulation of Radiation Events in Metals [Conference Poster]. https://www.osti.gov/biblio/1642765 Publication ID: 65497
-
Aksoy, D., Dingreville, R., Spearot, D., & Spearot, D. (2019). Computation of Embrittling Potencies of Sulfur for a Range of Nickel Pure Tilt Grain Boundaries via Atomistic Simulation Methods [Conference Poster]. https://www.osti.gov/biblio/1642767 Publication ID: 65500
-
Melia, M.A., Carroll, J.D., Whetten, S., Chandross, M., Argibay, N., Schindelholz, E., Kustas, A., Esmaeely, S., Locke, J., White, E., Anderson, I., & Anderson, I. (2019). Corrosion and mechanical behavior of direct energy deposited high entropy alloys [Conference Poster]. https://www.osti.gov/biblio/1642787 Publication ID: 65568
-
Noell, P., Rodelas, J., Ghanbari, Z., Laursen, C., & Laursen, C. (2019). Microstructural Modification and Healing of Additively Manufactured Parts by Electropulsing. https://doi.org/10.2172/1570883 Publication ID: 65623
-
Schaller, R.F., Srinivasan, J., Weirich, T., Marino, G., Annerino, A., Taylor, J.M., Melia, M.A., Bryan, C., Frankel, G., Locke, J., Schindelholz, E., & Schindelholz, E. (2019). Time Evolution of Atmoerpheric Pitting Damage on 304 Stainless Steel [Conference Poster]. https://www.osti.gov/biblio/1642824 Publication ID: 65631
-
Mattie, P., Jungjohann, K.L., Dingreville, R., Starr, M., & Starr, M. (2019). Pipeline corrosion research at Sandia National Laboratories: From nanoscale science to structural engineering and piping applications [Conference Poster]. https://www.osti.gov/biblio/1642839 Publication ID: 65677
-
Mattie, P., Jungjohann, K.L., Dingreville, R., Starr, M., & Starr, M. (2019). Pipeline corrosion research at Sandia National Laboratories: From nanoscale science to structural engineering and piping applications [Conference Poster]. https://www.osti.gov/biblio/1642872 Publication ID: 65754
-
Noell, P., Johnson, Q., Laursen, C., Carroll, J.D., & Carroll, J.D. (2019). Does porosity in additively manufactured materials matter during compression? [Conference Poster]. https://www.osti.gov/biblio/1643065 Publication ID: 65808
-
Melia, M.A., Schindelholz, E., Duran, J.G., & Duran, J.G. (2019). Influence of build orientation and surface finish on the corrosion of additively manufactured 316L [Conference Poster]. https://www.osti.gov/biblio/1642001 Publication ID: 64903
-
Ghanbari, Z., Rodelas, J., Noell, P., Susan, D., & Susan, D. (2019). Furthering Physical Mechanical and Joining Metallurgy R&D Using the Gleeble(r) 3500 [Conference Poster]. https://www.osti.gov/biblio/1642132 Publication ID: 65223
-
Melia, M.A., Rodelas, J., Schindelholz, E., & Schindelholz, E. (2019). Corrosion of Additively Manufactured Stainless Steel – Process Structure and Performance [Conference Poster]. https://www.osti.gov/biblio/1642647 Publication ID: 65340
-
Schaller, R.F., Srinivasan, J., Weirich, T., Marino, G., Annerino, A., Taylor, J.M., Byran, C., Frankel, J., Locke, J., Melia, M.A., Schindelholz, E., & Schindelholz, E. (2019). Atmospheric Corrosion and Cracking of Ground SS304 [Conference Poster]. https://www.osti.gov/biblio/1642629 Publication ID: 65366
-
Schindelholz, E., Rodelas, J., Melia, M.A., Montoya, T., & Montoya, T. (2019). Corrosion Testing of Friction Stir Welded 304L Stainless Steel. https://doi.org/10.2172/1569520 Publication ID: 65392
-
Dickens, S., Noell, P., Rodelas, J., Wilson, D., & Wilson, D. (2019). Identification of Twin Formation in Additively Manufactured Stainless Steel by In-Situ EBSD [Conference Poster]. https://doi.org/10.1017/S1431927619013692 Publication ID: 70247
-
Chen, E., Deo, C., Dingreville, R., & Dingreville, R. (2019). Reduced-Order Atomistic Method for Simulating High Dose Irradiation in Metals [Conference Poster]. https://www.osti.gov/biblio/1641624 Publication ID: 70436
-
Percival, S.J., Melia, M.A., Rempe, S., & Rempe, S. (2019). RO membranes for Clean Water – Sandia Pitch Competition 2019 [Presentation]. https://www.osti.gov/biblio/1645833 Publication ID: 70633
-
Schindelholz, E., Carpenter, J., Katona, R., Knight, A., Dingreville, R., Bryan, C., & Bryan, C. (2019). Storage Canister Pitting and SCC: Progress Update [Presentation]. https://www.osti.gov/biblio/1645339 Publication ID: 68949
-
Alberdi, R., Dingreville, R., Robbins, J., Walsh, T., & Walsh, T. (2019). Nonlinear Topology Optimization with Microstructural Effects: A Micromorphic Approach [Conference Poster]. https://www.osti.gov/biblio/1640799 Publication ID: 69186
-
Stewart, J., Olles, J.D., Wixom, R.R., Dingreville, R., & Dingreville, R. (2019). Shock Hugoniot Relationships for Crystalline and Amorphous HNAB: Insights from Atomistic Simulations and Virtual Diffraction Calculations [Conference Poster]. https://www.osti.gov/biblio/1640801 Publication ID: 69192
-
Louie, D., Dingreville, R., Bignell, J., Gilkey, L., Le, S., Gordon, N., & Gordon, N. (2019). Computational capability to study airborne release of solids and container breach due to mechanical insults [Conference Poster]. International Conference on Nuclear Engineering, Proceedings, ICONE. https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=85071376045&origin=inward Publication ID: 65600
-
Dingreville, R. (2019). Influence of Structure and Chemistry on the Radiation Resistance of Boundaries [Conference Poster]. https://www.osti.gov/biblio/1882113 Publication ID: 68579
-
Weirich, T., Schaller, R.F., Knight, A., Taylor, J.M., Melia, M.A., Locke, J., Bryan, C., Schindelholz, E., & Schindelholz, E. (2019). Pitting and Cracking Initiation: Effect of Humidity and Salt [Presentation]. https://www.osti.gov/biblio/1645309 Publication ID: 68777
-
Melia, M.A., Carroll, J.D., Whetten, S., Esmaeely, S., Locke, J., White, E., Anderson, I., Chandross, M., Argibay, N., Schindelholz, E., Kustas, A., & Kustas, A. (2019). Corrosion and mechanical behavior of direct energy deposited high entropy alloy (CoCrFeMnNi) [Conference Poster]. https://www.osti.gov/biblio/1639622 Publication ID: 67850
-
Melia, M.A., Schindelholz, E., Schindelholz, E., & Schindelholz, E. (2019). Corrosion of Additively Manufactured Stainless Steels ? Process Structure and Performance [Conference Poster]. https://www.osti.gov/biblio/1639623 Publication ID: 67851
-
Schindelholz, E., Melia, M.A., Montoya, T., Jared, B.H., Tholda, R., & Tholda, R. (2019). Environmentally Assisted Cracking of 316L Additively Manufactured by Selective Laser Melting [Conference Poster]. https://www.osti.gov/biblio/1639649 Publication ID: 67883
-
Bryan, C., Schindelholz, E., Knight, A., Taylor, J.M., Dingreville, R., & Dingreville, R. (2019). Stability of Sea-Salt Deliquescent Brines on Heated Surfaces of SNF Dry Storage Canisters [Conference Poster]. https://www.osti.gov/biblio/1639771 Publication ID: 68077
-
Dingreville, R., Aksoy, D., Spearot, D., & Spearot, D. (2019). Sulfur induced embrittlement in Ni: Parameterization of an embedded atom method potential [Conference Poster]. https://www.osti.gov/biblio/1639346 Publication ID: 67385
-
Noell, P., Taleff, E., & Taleff, E. (2019). Substructure Texture Evolution and Dynamic Abnormal Grain Growth in a Mo Rod Material [Conference Poster]. https://www.osti.gov/biblio/1639352 Publication ID: 67395
-
Noell, P., Carroll, J.D., Michael, J., Boyce, B., & Boyce, B. (2019). In-situ High-Resolution EBSD characterization of creep cavitation in OFHC Copper [Conference Poster]. https://www.osti.gov/biblio/1639353 Publication ID: 67396
-
Dingreville, R., Vizoso, D., Deo, C., & Deo, C. (2019). Defect Characterization in bcc Nb [Conference Poster]. https://www.osti.gov/biblio/1639456 Publication ID: 67561
-
Dingreville, R. (2019). Design & Analysis of Mesoscale ROMs for Predicting Microstructure Evolution in Extreme Environments [Conference Poster]. https://www.osti.gov/biblio/1639457 Publication ID: 67562
-
Dingreville, R., Chen, E., Deo, C., & Deo, C. (2019). Influence of Structure and Chemistry on the Mechanics of (Phase) Boundaries [Conference Poster]. https://www.osti.gov/biblio/1884676 Publication ID: 67563
-
Dingreville, R. (2019). Challenges and Opportunities for Materials Discovery in Extreme Environments [Presentation]. https://www.osti.gov/biblio/1644614 Publication ID: 67722
-
Dickens, S., Noell, P., Rodelas, J., Wilson, D., & Wilson, D. (2019). Identification of Twin Formation in Additively Manufactured Stainless Steel by In-Situ EBSD [Conference Poster]. https://doi.org/10.1017/S1431927619013692 Publication ID: 66962
-
Louie, D., Bignell, J., Le, S., Dingreville, R., Gilkey, L., Gordon, N., Fascitelli, D., & Fascitelli, D. (2019). NSRD-16: Computational Capability to Substantiate DOE-HDBk-3010 Data. https://doi.org/10.2172/1495195 Publication ID: 64285
-
Bryan, C., Schindelholz, E., Knight, A., Taylor, J.M., Dingreville, R., & Dingreville, R. (2019). Stability of sea-salt deliquescent brines on heated surfaces of SNF dry storage canisters [Conference Poster]. International High-Level Radioactive Waste Management 2019, IHLRWM 2019. https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=85067123861&origin=inward Publication ID: 64300
-
Chavez, A., Dingreville, R., Sands, L., Yang, B., & Yang, B. (2019). GT: Sandia Technical Engagement Accomplishments [Presentation]. https://www.osti.gov/biblio/1643816 Publication ID: 64335
-
Sills, R.B., Noell, P., Boyce, B., & Boyce, B. (2018). Void Growth by Dislocation Adsorption During Ductile Rupture [Conference Poster]. https://www.osti.gov/biblio/1807033 Publication ID: 60596
-
Noell, P., Carroll, J.D., Boyce, B., & Boyce, B. (2018). The Mechanisms of Ductile Fracture [Presentation]. https://www.osti.gov/biblio/1806896 Publication ID: 60047
-
Monterrosa, A.M., Stewart, J., Price, P., Dingreville, R., Hattar, K., & Hattar, K. (2018). In-Situ Characterization of Single Ion Strikes in Single Crystal Silicon [Conference Poster]. https://www.osti.gov/biblio/1576881 Publication ID: 60333
-
Kosmidou, M., Briot, N., Dingreville, R., Hattar, K., Madden, N., Chisholm, C., Balk, T., & Balk, T. (2018). In-Situ Studies of Nanoporous Niobium During Dealloying and Irradiation [Conference Poster]. https://www.osti.gov/biblio/1761120 Publication ID: 60379
-
Monterrosa, A.M., Price, P., Stewart, J., Dingreville, R., Hattar, K., & Hattar, K. (2018). Characterization of Single Ion Strikes using In-Situ Dynamic Transmission Electron Microscopy [Conference Poster]. https://www.osti.gov/biblio/1594314 Publication ID: 59397
-
Dingreville, R. (2018). Modeling Materials Degradation & Defects in Nanostructures [Conference Poster]. https://www.osti.gov/biblio/1593605 Publication ID: 59601
-
Dingreville, R. (2018). Modeling Materials Degradation & Defects in Nanostrucutres [Presentation]. https://www.osti.gov/biblio/1592645 Publication ID: 59755
-
Melia, M.A., Nguyen, H., Rodelas, J., Schindelholz, E., & Schindelholz, E. (2018). Investigations on the corrosion behavior of additively manufactured stainless steel [Conference Poster]. https://www.osti.gov/biblio/1592675 Publication ID: 59882
-
Kuether, R., Allensworth, B., Backer, A., Chen, E., Dingreville, R., Forrest, E.C., Knepper, R., Tappan, A., Marquez, M., Vasiliauskas, J.G., Rupper, S., Grant, M., Atencio, L., Hipple, T., Maes, D., Timlin, J., Ma, T., Garcia, R., Danford, F., … Swiler, L. (2018). Posters for AA/CE Reception [Presentation]. https://www.osti.gov/biblio/1592652 Publication ID: 59884
-
Melia, M.A., Schaller, R., Nguyen, H., Taylor, J.M., Rodelas, J., Schindelholz, E., & Schindelholz, E. (2018). Characterization of local corrosion on 304L formed using the laser engineered network shape (LENS(r)) additive manufacturing technique [Conference Poster]. https://www.osti.gov/biblio/1562348 Publication ID: 58825
-
Dingreville, R., Hattar, K., Boyle, T., Monterrosa, A.M., Barr, C., Weck, P., Juan, P., & Juan, P. (2018). Fundamentals of Pellet-Clad Debonding. https://doi.org/10.2172/1475101 Publication ID: 59148
-
York, W., York, W., Sugar, J., Medlin, D., Noell, P., & Noell, P. (2018). A Method for Plan-View FIB Liftout of Near Surface Defects with Minimal Beam-Induced Damage [Conference Poster]. https://doi.org/10.1017/S1431927618004701 Publication ID: 63735
-
Melia, M.A., Schaller, R., Nguyen, H., Taylor, J.M., Rodelas, J., Schindelholz, E., & Schindelholz, E. (2018). Corrosion of the 304L stainless steel produced by the laser engineered net shape (LENS) technique [Conference Poster]. https://www.osti.gov/biblio/1582195 Publication ID: 63759
-
Dingreville, R., Jungjohann, K.L., Wixom, R.R., & Wixom, R.R. (2018). PREDICTIVE MODELING AND EXPERIMENTAL CHARACTERIZATION FOR INVESTIGATING MATERIALS DEGRADATION [Presentation]. https://www.osti.gov/biblio/1582536 Publication ID: 63930
-
Melia, M.A., Schaller, R., Nguyen, H., Taylor, J.M., Rodelas, J., Schindelholz, E., & Schindelholz, E. (2018). The susceptibility to local corrosion for 304L additively manufactured by a high and low power laser engineered network shape (LENS) technique [Conference Poster]. https://www.osti.gov/biblio/1806535 Publication ID: 63204
-
Noell, P., Carroll, J.D., Hattar, K., Clark, B.G., Boyce, B., & Boyce, B. (2018). Ductile fracture in pure metals: from void nucleation to final fracture [Presentation]. https://www.osti.gov/biblio/1530940 Publication ID: 62816
-
Melia, M.A., Schaller, R., Nguyen, H., Taylor, J.M., Rodelas, J., Schindelholz, E., & Schindelholz, E. (2018). Correlating microstructure to corrosion response for additively manufactured 304L stainless steel [Conference Poster]. https://www.osti.gov/biblio/1514786 Publication ID: 62081
-
Juan, P., Dingreville, R., & Dingreville, R. (2018). Mechanics of finite crack considering interfacial elasticity [Conference Poster]. https://www.osti.gov/biblio/1523339 Publication ID: 62199
-
Noell, P., Carroll, J.D., Hattar, K., Michael, J., Clark, B.G., Boyce, B., & Boyce, B. (2018). The Micromechanisms of Void Nucleation [Conference Poster]. https://www.osti.gov/biblio/1523798 Publication ID: 62258
-
Carroll, J.D., Lim, H., Lane, J., Battaile, C., Boyce, B., Noell, P., & Noell, P. (2018). Crystallographic Rotation and Deformation in Tantalum [Conference Poster]. https://www.osti.gov/biblio/1524822 Publication ID: 62332
-
Chen, E., Dingreville, R., & Dingreville, R. (2018). Interfacial Defect Structure of U-Zr Stacking Misfit Phase Boundaries [Conference Poster]. https://www.osti.gov/biblio/1506571 Publication ID: 61447
-
Chen, E., Dingreville, R., Deo, C., & Deo, C. (2018). Determination of the Threshold Displacement Energy in Uranium [Conference Poster]. https://www.osti.gov/biblio/1506572 Publication ID: 61448
-
Dingreville, R., Aksoy, D., Spearot, D., & Spearot, D. (2018). Mechanics of Finite (Interfacial) Cracks [Conference Poster]. https://www.osti.gov/biblio/1499249 Publication ID: 60974
-
Dingreville, R., Stewart, J., & Stewart, J. (2018). Characterizing displacement cascade damage in bulk Si via virtual diffraction techniques [Conference Poster]. https://www.osti.gov/biblio/1500163 Publication ID: 61041
-
Noell, P., Carroll, J.D., Boyce, B., Hattar, K., Clark, B.G., & Clark, B.G. (2018). Void Initiation During Ductile Rupture of Pure Metals [Conference Poster]. https://www.osti.gov/biblio/1500182 Publication ID: 61056
-
Juan, P., Dingreville, R., Hattar, K., Briggs, S., & Briggs, S. (2018). Competition of deformation modes in irradiated Zr alloys: a micromechanical approach [Conference Poster]. https://www.osti.gov/biblio/1500195 Publication ID: 61088
-
Melia, M.A., Schaller, R., Nguyen, H., Taylor, J.M., Rodelas, J., Schindelholz, E., & Schindelholz, E. (2018). Correlating the microstructure and surface morphology of additively manufactured 304L series stainless steel to its corrosion response [Conference Poster]. https://www.osti.gov/biblio/1503434 Publication ID: 61220
-
Melia, M.A., Schaller, R., Nguyen, H., Taylor, J.M., Rodelas, J., Schindelholz, E., & Schindelholz, E. (2018). Correlating the microstructure and surface morphology of laser engineered net shape (LENS) 304L series stainless steel to its corrosion response [Conference Poster]. https://www.osti.gov/biblio/1503435 Publication ID: 61221
-
Zarnas, P., Qu, J., Dingreville, R., & Dingreville, R. (2018). Interactions between point defects and microstructure: a chemomechanical framework [Conference Poster]. https://www.osti.gov/biblio/1512040 Publication ID: 61400
-
Bignell, J., Gilkey, L., Dingreville, R., Sanborn, S., Jones, C., & Jones, C. (2018). Blind Prediction of the Response of an Additively Manufactured Tensile Test Coupon Loaded to Failure [Conference Poster]. https://www.osti.gov/biblio/1513715 Publication ID: 59581
-
Noell, P. (2018). The Role of Microstructure During Stochastic Processes: Void Nucleation and Abnormal Grain Growth [Presentation]. https://www.osti.gov/biblio/1513906 Publication ID: 59832
-
Dingreville, R. (2018). Mechanics of Finite (Interfacial) Cracks [Conference Poster]. https://www.osti.gov/biblio/1512063 Publication ID: 58553
-
Dingreville, R. (2017). Modeling of defects evolution in materials across multiple scales [Presentation]. https://www.osti.gov/biblio/1510697 Publication ID: 54080
-
Noell, P., Carroll, J.D., Hattar, K., Clark, B.G., Boyce, B., & Boyce, B. (2017). The Micromechanics of Void Nucleation [Presentation]. https://www.osti.gov/biblio/1511809 Publication ID: 54358
-
Noell, P., Carroll, J.D., Hattar, K., Clark, B.G., Michael, J., Boyce, B., & Boyce, B. (2017). Do Voids Initiate at Grain Boundaries During Ductile Rupture? [Conference Poster]. https://www.osti.gov/biblio/1510406 Publication ID: 53488
-
Noell, P., Carroll, J.D., Hattar, K., Clark, B.G., Boyce, B., & Boyce, B. (2017). Do voids nucleate at grain boundaries during ductile rupture?. Acta Materialia, 137, pp. 103-114. https://doi.org/10.1016/j.actamat.2017.07.004 Publication ID: 56185
-
Dingreville, R., Dingreville, R., Stewart, J., Price, P., Hattar, K., & Hattar, K. (2017). A Virtual Diffraction Method for Guiding the Characterization of Isolated Radiation-Induced Nanoscale Damage Events [Conference Poster]. https://www.osti.gov/biblio/1474225 Publication ID: 53120
-
Haskin, T., Jankovsky, Z., Seng, B., Cohn, B., Evans, A., Wright, C., Sena, E., Basurto, E., Chen, E., Lopez, C., Stuart, Z., Osborn, D., Wheeler, T., Middleton, B., Muna, A., Brooks, D., Dingreville, R., Kalinina, E., Denman, M., & Denman, M. (2017). 8840/8850 summer internship mini symposium [Presentation]. https://www.osti.gov/biblio/1464682 Publication ID: 57880
-
Dingreville, R., Sanborn, S., Mattie, P., Eckert, A., Lewis, J.R., Hund, L., Martin, N., Brooks, D., Clark, A., Mariner, P., & Mariner, P. (2017). xLPR V2.0 EXAMPLES OF IT APPLICATIONS [Presentation]. https://www.osti.gov/biblio/1465913 Publication ID: 58035
-
Zhou, X., Karnesky, R.A., Dingreville, R., & Dingreville, R. (2017). Molecular Dynamics Simulations of Radiation-Enhanced Permeation of Hydrogen Isotopes In Ni [Presentation]. https://www.osti.gov/biblio/1466493 Publication ID: 58121
-
Dingreville, R., Eckert, A., Sanborn, S., Mariner, P., & Mariner, P. (2017). xLPR V2.0 Training [Presentation]. https://www.osti.gov/biblio/1468894 Publication ID: 58271
-
Dingreville, R., Eckert, A., Sanborn, S., Mariner, P., & Mariner, P. (2017). Probabilistic Fracture Mechanics: A Primer [Presentation]. https://www.osti.gov/biblio/1513842 Publication ID: 58272
-
Dingreville, R., Eckert, A., Sanborn, S., Mariner, P., & Mariner, P. (2017). Deterministic Model Overview [Presentation]. https://www.osti.gov/biblio/1513843 Publication ID: 58273
-
Dingreville, R., Eckert, A., Sanborn, S., Mariner, P., & Mariner, P. (2017). xLPR SimEditor [Presentation]. https://www.osti.gov/biblio/1513844 Publication ID: 58274
-
Dingreville, R., Eckert, A., Sanborn, S., Mariner, P., & Mariner, P. (2017). xLPR Input and pre-processing [Presentation]. https://www.osti.gov/biblio/1513846 Publication ID: 58276
-
Dingreville, R., Eckert, A., Sanborn, S., Mariner, P., & Mariner, P. (2017). xLPR v2.0 Resources: xLPR Portal [Presentation]. https://www.osti.gov/biblio/1513337 Publication ID: 58277
-
Dingreville, R., Dingreville, R., Sanborn, S., Mariner, P., Eckert, A., & Eckert, A. (2017). Challenge Problem 1: Refined SCC Simulation Add Overlay [Presentation]. https://www.osti.gov/biblio/1513338 Publication ID: 58278
-
Dingreville, R., Sanborn, S., Eckert, A., Mariner, P., & Mariner, P. (2017). Challenge Problem 2: Add Fatigue and Importance Sampling [Presentation]. https://www.osti.gov/biblio/1513339 Publication ID: 58279
-
Dingreville, R., Eckert, A., Sanborn, S., Mariner, P., & Mariner, P. (2017). How to run an xLPR V2.0 Simulation [Presentation]. https://www.osti.gov/biblio/1468895 Publication ID: 58281
-
Dingreville, R., Eckert, A., Sanborn, S., Mariner, P., & Mariner, P. (2017). Nuts and bolts of xLPR V2.0: Navigating and following logic within the code [Presentation]. https://www.osti.gov/biblio/1468896 Publication ID: 58282
-
Dingreville, R., Mariner, P., Eckert, A., Sanborn, S., & Sanborn, S. (2017). FUNDAMENTALS OF UNCERTAINTY QUANTIFICATION AND STATISTICAL ANALYSIS IN xLPR V2.0 [Presentation]. https://www.osti.gov/biblio/1469068 Publication ID: 58307
-
Dingreville, R. (2017). The role of grain boundary structure and hydrogen on interfacial fracture toughness [Conference Poster]. https://www.osti.gov/biblio/1506593 Publication ID: 57249
-
Dingreville, R., Juan, P., & Juan, P. (2017). Mechanics of finite crack considering interfacial elasticity [Conference Poster]. https://www.osti.gov/biblio/1506833 Publication ID: 57278
-
Dingreville, R., Aksoy, D., Spearot, D., & Spearot, D. (2017). A primer on selecting grain boundary sets for comparison of interfacial fracture properties in MD simulations [Conference Poster]. https://www.osti.gov/biblio/1462656 Publication ID: 57655
-
Weck, P., Juan, P., Dingreville, R., Kim, E., & Kim, E. (2017). Density functional analysis of fluorite-structured (Ce, Zr)O2/CeO2 interfaces [Density functional analysis of fluorite-structured (Ce, Zr)O2/CeO2 interfaces: Implications for catalysis and energy applications]. Journal of Physical Chemistry. C, 121(27). https://doi.org/10.1021/acs.jpcc.7b03902 Publication ID: 56002
-
O’Brien, C., Bignell, J., Dingreville, R., Juan, P., & Juan, P. (2017). Fragmentation prediction for a brittle ceramic: A integrated two-scale model approach [Conference Poster]. https://www.osti.gov/biblio/1458290 Publication ID: 56776
-
Boyce, B., Clark, B.G., Carroll, J.D., Noell, P., Sills, R.B., & Sills, R.B. (2017). Ductile Void Nucleation in Pure BCC Metals under Quasi-static Loading [Conference Poster]. https://www.osti.gov/biblio/1456770 Publication ID: 56881
-
Hattar, K., Dingreville, R., & Dingreville, R. (2017). Nanomaterials Response to Radiation Environments [Presentation]. https://www.osti.gov/biblio/1457991 Publication ID: 56300
-
Klamm, B., Hess, R., Klamm, B., Hess, R., Hattar, K., Boyle, T., Perales, D., Dingreville, R., & Dingreville, R. (2017). Preparation and Characterization of UO2 Epitaxial Thin Films [Conference Poster]. https://www.osti.gov/biblio/1456434 Publication ID: 55648
-
Schleife, A., Lee, C., Hattar, K., Dingreville, R., Foiles, S., & Foiles, S. (2017). Multiscale modeling of electron-ion dynamics in silicon under particle radiation [Conference Poster]. https://www.osti.gov/biblio/1456461 Publication ID: 55693
-
Hattar, K., Briot, N., Balk, T., Hattar, K., Dingreville, R., & Dingreville, R. (2017). Radiation Effects on the Mechanical Properties of Nanoporous Gold [Conference Poster]. https://www.osti.gov/biblio/1426532 Publication ID: 55284
-
Zhou, X., Karnesky, R.A., Dingreville, R., & Dingreville, R. (2017). Molecular Dynamics Studies of Grain Boundary and Irradiation Effects on Hydrogen Diffusion in Nickel [Conference Poster]. https://www.osti.gov/biblio/1456325 Publication ID: 55468
-
Zhou, X., Dingreville, R., Karnesky, R.A., & Karnesky, R.A. (2017). Molecular Dynamics Simulations of Radiation-Enhanced Permeation of Hydrogen Isotopes In Ni [Conference Poster]. https://www.osti.gov/biblio/1456378 Publication ID: 55546
-
Dingreville, R., Chen, E., Deo, C., & Deo, C. (2017). Structure of semi-coherent U-Zr (miscible) interfaces [Conference Poster]. https://www.osti.gov/biblio/1427151 Publication ID: 55013
-
Dingreville, R., Hattar, K., Muntifering, B., Dunn, A., Capolungo, L., & Capolungo, L. (2017). Displacement Rate and Temperature Equivalence in Stochastic Cluster Simulation of Irradiated alpha-Fe [Conference Poster]. https://www.osti.gov/biblio/1427148 Publication ID: 55014
-
Dingreville, R., Aksoy, D., Spearot, D., & Spearot, D. (2017). Grain boundary fracture: A perspective from atomistic simulations [Conference Poster]. https://www.osti.gov/biblio/1431561 Publication ID: 55021
-
Boyce, B., Carroll, J.D., Noell, P., Bufford, D., Clark, B.G., Hattar, K., Lim, H., Battaile, C., & Battaile, C. (2017). Mechanisms for Ductile Rupture – FY16 ESC Progress Report. https://doi.org/10.2172/1340630 Publication ID: 52882
-
Muntifering, B., Fang, Y., Leff, A.C., Dunn, A., Qu, J., Taheri, M.L., Dingreville, R., Hattar, K., & Hattar, K. (2016). In situ Transmission Electron Microscopy He+ implantation and thermal aging of nanocrystalline iron. Journal of Nuclear Materials, 482, pp. 139-146. https://doi.org/10.1016/j.jnucmat.2016.10.001 Publication ID: 49421
-
Dingreville, R., Mattie, P., & Mattie, P. (2016). Accident Tolerant(Resistant) Fuels and Materials for Light Water Reactor [Presentation]. https://www.osti.gov/biblio/1412821 Publication ID: 48093
-
Dingreville, R. (2016). xLPR: Probabilistic Fracture Mechanics Approach to Dissimilar Metal Weld Stability in NPP [Presentation]. https://www.osti.gov/biblio/1413422 Publication ID: 48119
-
Louie, D., Brown, A., Gelbard, F., Bignell, J., Pierce, F., Voskuilen, T., Rodriguez, S., Dingreville, R., Zepper, E., Juan, P., Le, S., Gilkey, L., & Gilkey, L. (2016). NSRD-11: Computational Capability to Substantiate DOE-HDBK-3010 Data. https://doi.org/10.2172/1334942 Publication ID: 48036
-
Dingreville, R., Duun, A., Capolungo, L., & Capolungo, L. (2016). Predictive Modeling of Aging and Degradation of Materials in Extreme Environments. https://doi.org/10.2172/1431187 Publication ID: 47018
-
Franco, M., Dingreville, R., Hattar, K., Ji, W., & Ji, W. (2016). Effects of Single Ion Strikes into Si on the 3D Reciprocal Space [Presentation]. https://www.osti.gov/biblio/1406856 Publication ID: 47356
-
Bryan, C., Dingreville, R., Enos, D., & Enos, D. (2016). Estimating Bounding Corrosion Pit Sizes on Stainless Steel SNF Interim Storage Canisters [Conference Poster]. https://www.osti.gov/biblio/1406879 Publication ID: 47423
June 8, 2023