Publications

Results 100101–100125 of 100,993

Search results

Jump to search filters

Accident progression event tree analysis for postulated severe accidents at N Reactor

Wyss, Gregory D.

A Level II/III probabilistic risk assessment (PRA) has been performed for N Reactor, a Department of Energy (DOE) production reactor located on the Hanford reservation in Washington. The accident progression analysis documented in this report determines how core damage accidents identified in the Level I PRA progress from fuel damage to confinement response and potential releases the environment. The objectives of the study are to generate accident progression data for the Level II/III PRA source term model and to identify changes that could improve plant response under accident conditions. The scope of the analysis is comprehensive, excluding only sabotage and operator errors of commission. State-of-the-art methodology is employed based largely on the methods developed by Sandia for the US Nuclear Regulatory Commission in support of the NUREG-1150 study. The accident progression model allows complex interactions and dependencies between systems to be explicitly considered. Latin Hypecube sampling was used to assess the phenomenological and systemic uncertainties associated with the primary and confinement system responses to the core damage accident. The results of the analysis show that the N Reactor confinement concept provides significant radiological protection for most of the accident progression pathways studied.

More Details

Gridless electrostatic field solver for particle simulation codes in cylindrical geometry

Shokair, Isaac R.

A new gridless electrostatic field solver which utilities Fourier decomposition in the azimuthal coordinate has been developed and tested. The scaling with the number of simulation particles is N log N. This algorithm has been implemented in the BUCKSHOT code, which originally used a direct summation algorithm with N{sup 2} scaling. The Fourier decomposition in the new algorithm is done about the center of mass of each species, thus nonlinear ion hose physics is included in the m = O mode. Higher order modes describe non-axisymmetric profile changes. The breakeven point between the new solver and the direct summation algorithm is about N = 64 particles per species when up to m = 2 Fourier modes are kept. For a typical ion hose simulation with 256 particles per species the new solver is faster by a factor of about 2.7. 8 refs., 11 figs.

More Details

Fabrication and assembly of BOLVAPS (boil-off lithium vapor source) ceramic-option half anodes

Moore, Roger H.

In order to generate a lithium vapor on the anode surface within PBFA II, an electrically insulating, lithium-coated substrate is required. One approach for providing this lithium source is the ceramic-option anode. This anode consists of two halves, equatorially split, each containing an insulating ceramic insert onto which a lithium-bearing film is sputtered. A lithium vapor is generated by ohmically pulse heating this film to 1500 K. The half-anode structure required to produce this vapor consists of a ceramic insulator, steel housing, and disk conductors. This report describes the design and fabrication of these separate components and the procedures required to join them to form the half-anode assembly. In addition, appendices are included which contain detailed drawings and specifications for these operations. 5 refs., 10 figs.

More Details

Potential for long-term isolation by the Waste Isolation Pilot Plant disposal system

Bertram-Howery, S.G.; Swift, P.N.

The US Department of Energy's (DOE) Waste Isolation Pilot Plant (WIPP) must comply with EPA regulation 40 CFR Part 191, Subpart B, which sets environmental standards for radioactive waste disposal. The regulation, Environmental Radiation Protection Standards for Management and Disposal of Spent Nuclear Fuel, High-Level and Transuranic Radioactive Wastes (hereafter referred to as the Standard), was vacated in 1987 by a Federal Court of Appeals and is underground revision. By agreement with the Sate of New Mexico, the WIPP project is evaluating compliance with the Standard as promulgated, in 1985 until a new regulation is available. This report summarizes the early-1990 status of Sandia National Laboratories' (SNL) understanding of the Project's ability to achieve compliance. The report reviews the qualitative and quantitative requirements for compliance, and identifies unknowns complicating performance assessment. It discusses in relatively nontechnical terms the approaches to resolving those unknowns, and concludes that SNL has reasonable confidence that compliance is achievable with the Standard as first promulgated. 46 refs., 7 figs.

More Details

A human factors review of data entry devices

Allen, H.W.

This report provides system designers with basic human factors information and guidelines to help in the selection of manual data input devices. The selection of such devices is important with respect to the environment in which the device with be used, speed of data entry required, error potential, and the user friendliness of the candidate devices. The report reviews several of the most commonly used data input devices and provides a description of each, experimental evaluations, and observations and recommendations based on review of the data. In addition, the appendix presents an input device matrix that gives general guidance concerning input devices and the physical and mission environment in which they might be used. Additional assistance should be requested from Sandia National Laboratories (SNL) Human Factors Personnel. 23 refs., 13 figs.

More Details

Evolution of structure and viscoelasticity in diethanolamine-cured epoxy

Adolf, Douglas B.

As a crosslinking polymer cures, dramatic changes in molecular architecture occur. These structural changes in turn affect the viscoelastic behavior of the material. At a critical extent of reaction (the gel point), the polymer undergoes a transition from a viscous liquid to an elastic solid. We have monitored the evolution of structure and viscoelasticity in the most common epoxy encapsulant used at Sandia, diethanolamine-cured Epon 828. The structure evolves according to percolation theory, and the viscoelasticity evolves according to our dynamic scaling theory for branched polymers. 9 refs., 12 figs.

More Details

Radiation transition rates in a uniform longitudinal 6-kG magnetic field for the (5p) sup 5 (5d)-(5p) sup 5 (6p) terms in xenon

Mcguire, E.J.

Calculations are performed to predict the distribution of the (5p){sup 5}(5d)--(5p){sup 5}(6p)emission cross section in Xe in a strong magnetic field. For isotopes with no nuclear magnetic moment, the question is the calculation of Lande g factors. This is done with wavefunctions obtained by diagonalizing the electrostatic interaction in jj coupling, leading to reasonable accurate Lande g factors. For levels described by quantum numbers J and M, the Zeeman interaction is always diagonal in M, and with a 6 kG magnetic field the Zeeman interaction is effectively diagonal in J (the non-diagonal matrix elements are negligible), so the resulting cross section calculations are simple. For the isotopes with non-zero magnetic moments, one must determine the dipole and quadrupole hyperfine splitting coefficients. To do this and to improve the overall fit of the calculated and measured energy levels, it was necessary to include configuration interaction between terms of the (5p){sup 5}(5d) and (5p){sup 5}(6s) configurations. Comparisons are made between these calculated hyperfine parameters and experiment. Hyperfine splittings are tabulated as are the cross sections and energy shifts due to hyperfine interaction in each transition. When hyperfine interaction is included and levels are characterized by the quantum numbers F and M{sub F}, the Zeeman interaction is diagonal in M{sub F} but different F. All these effects were included in the calculations leading to a particularly rich spectrum for Xe(131) with I = 3/2. For example, the (5p){sup 5}(5d){sub J} = 4{minus}(5p){sup 5}(6p){sub J} = 3 transition is split into approximately 336 components. 21 refs., 3 figs., 12 tabs.

More Details

Geotechnology for tight gas reservoirs

Northrop, D.A.

This annual report summarizes progress which has been made in Fiscal Year 1989 on this program of geotechnology for tight gas reservoirs. Most of the studies are an outgrowth of the results and experience from the Multiwell Experiment -- an unprecedented investigation of western gas reservoirs typical of the Mesaverde Formation. Results are presented in the following study areas: (1) tectonism, subsidence and fracturing of these reservoirs, (2) mechanism for the formation of regional fractures in flat-lying basins, (3) the case against natural hydraulic fracturing, (4) characterization and implications of dickite-mineralized fractures, (5) significance of coring-induced fractures, (6) determination of an effective stress law for permeability in tight sandstones, and (7) stress azimuths for two well sites in the Piceance Basin. In addition, technology transfer aspects and impact of the Multiwell Experiment are summarized. 27 refs., 28 figs., 1 tab.

More Details

Future Look

Yarnall, C.A.

This study was performed under FUTURE LOOK, a joint Defense Nuclear Agency/Department of Energy (DNA/DOE) sponsored study. The intent of FUTURE LOOK is to identify and develop means of providing requisite security and survivability to the Non-Strategic Nuclear Forces (NSNF) in the Twenty-First Century. Our current thinking about the future world in Europe is summarized. In this report we develop four scenarios/stockpile cases to cover the spectrum of potential happenings in Europe; we also develop general security and survivability implications and recommendations for each case. The four cases are: (1) a substantially reduced (factor of 2--10) European stockpile; (2) a near-zero stockpile, with no Army weapons remaining in Europe; (3) current stockpile in Europe remains; and (4) current stockpile numbers remain, but aggressive modernization is allowed. We plan to use the information in this report to assist in developing detailed security and survivability options as part of our follow-on to FUTURE LOOK studies. 8 refs., 6 tabs.

More Details

Documentation of Sandia R and D storage program

Giles, C.N.

The purpose of this computer program is to serve as a tool in the daily operation of the R D storage function. This menu-driven, interactive program was written in DBase III+ for use on an IBM PC-XT computer to efficiently store items in a minimum space, inventory, locate, report, withdraw and record the activities in a history file. A drive path is utilized in numbering each storage location to minimize the distance and time required to store and retrieve an item. An empty-space listing is available for a limited inventory.

More Details

Deep-geologic disposal in the US: The WIPP [Waste Isolation Pilot Plant] and Yucca Mountain projects

Lynch, R.W.

The United States Department of energy, after considering a number of alternative disposal methods for radioactive wastes in the United States, Proposed that these wastes should be disposed of in deep geologic repositories. This alternative is currently being developed at the Waste Isolation Pilot Plant (WIPP), for transuranic waste, and investigated at Yucca Mountain, for spent power-reactor fuel and vitrified high-level waste, the latter resulting principally from defense activities. In addition, a research program on subseabed disposal was active from 1973 until 1987 but is currently suspended. The two deep-geologic disposal projects are discussed in detail and the subseabed-disposal research project is briefly summarized. 28 refs., 39 figs., 4 tabs.

More Details

Thermal and mechanical codes first benchmark exercise; Part 2, Elastic analysis: Yucca Mountain Project

Bauer, Stephen

Thermal and mechanical models for intact and jointed rock mass behavior are being developed, verified, and validated at Sandia National Laboratories for the Yucca Mountain Project. Benchmarking is an essential part of this effort and is the primary tool for verifying engineering software used to solve thermomechanical problems. This report presents the results of the second phase of the first thermomechanical benchmark exercise. In the first phase of this exercise, three finite element codes for nonlinear heat conduction and one coupled thermoelastic boundary element code (HEFF) were used to solve the thermal portion of the benchmark problem. The boundary element code HEFF was used in this exercise because it calculates a solution to the coupled thermal/elastic problem using an approximate analytical method and, thus, provides a means of comparing the finite element solutions with a solution obtained by an independent method. The results from the thermal analysis were then used as input to the second phase of the analysis, which consisted of solving the structural portion of the benchmark problem using a linear elastic rock mass model. Five different structural codes, JAC, SPECTROM-31, VISCOT, and HEFF, were used by the participants in this portion of the study. The problem solved by each code was a two-dimensional idealization of a series of drifts with the approximate dimensions of the proposed design for vertical emplacement of nuclear waste at Yucca Mountain. 6 refs., 74 figs., 4 tabs.

More Details

HVOF: Particle, Flame Diagnostics and Coating Characteristics

Smith, Mark F.

Dual focus laser velocimetry (L2F), photographic techniques, and pressure measurements were used to investigate particle and flame characteristics of a high velocity oxygen/fuel (HVOF) flame spray gun known as CDS''. Velocities of alumina, tungsten carbide, and Triballoy particles within the HVOF effluent stream have been measured using L2F techniques. Photographs of the exiting gases were used to determine the local Mach numbers within the gas stream. Measurements of Mach angles in the photographs were used to determine the actual gas velocity in the free jet of the device. Pressure measurements were made on the HVOF device which enabled calculations of the gas content, R, and the specific heat ratio, {kappa}. These calculations combined with estimates of gas temperature are used to calculate gas velocities at Mach 1 (nozzle exit). The HVOF device was used to produce dense WC/12 wt. % Co and Triballoy T-400 coatings. For the two gas flow conditions examined, higher hardness values and densities were observed for coatings deposited at the higher gas flow rates.

More Details

HERMES III Control and Monitor System, technical reference

Mitchell, R.A.

This report describes the major hardware and software components of the HERMES III Control and Monitor System at the Simulation Technology Laboratory (STL) at Sandia National Laboratories. The HERMES III Control and Monitor System is a computer controlled system that controls and monitors the charging, arming, and firing of the HERMES III accelerator. This documentation is intended to be a general introduction to the system for engineers and technicians involved in the maintenance and modification of the system. It may also be useful to persons interested in designing and constructing a similar control system. This report collects many of the documents produced throughout the project and directs the reader toward other documents written for this project.

More Details

Oxygen Deficiency Monitor System

Devlin, G.L.

This report describes the components and installation of the Oxygen Deficiency Monitor System (ODMS) at the Simulation Technology Laboratory (STL) at Sandia National Laboratories. The ODMS presently monitors the oxygen concentration of the ambient air in the lower levels of the laboratory where air circulation may be insufficient to disperse gases that may settle and accumulate creating an oxygen-deficient environment. The intent of this report is to provide a general introduction to the system for personnel involved in the maintenance and modifications of the system and may be useful to people interested in installing a similar system. This will report describe the hardware components, installation considerations, operation, and maintenance of the system. 6 refs., 5 figs.

More Details

Literature Review of Crud Spallation Source With Application to a Nuclear Waste Repository

Adams, Kenneth G.

The literature is reviewed on the amount and the characteristics of particulate material (crud), that is deposited on Light Water Reactor (LWR) fuel rods and assemblies. Currently available data on crud composition, specific activity, spallation mechanisms, potential environmental release, and particle size distributions is considered. In addition, literature that pertains to the possible impact of crud on repository operations is surveyed. This report consists of rather extensive excerpts from the published literature on crud that may have a bearing on repository risk assessment. Commentary on the possible effects of crud on repository operations and the applicability of available crud information to repository risk analyses is included. In addition, estimates are made of the quantity of crud that might be available for release during the different phases of repository operations. Using these estimates, the total effective dose equivalent is determined at several distances from a release point.

More Details

1989 Environmental monitoring report, Sandia National Laboratories, Albuquerque, New Mexico

Hwang, Hue-Su A.

This 1989 report contains monitoring data from routine radiological and nonradiological environmental surveillance activities. Summaries of significant environmental compliance programs in progress such as National Environmental Policy Act documentation, environmental permits, environmental restoration, and various waste management programs for Sandia National Laboratories in Albuquerque (SNL, Albuquerque) are included. The maximum offsite dose impact was calculated to be 8.8 {times} 10{sup {minus}4} mrem. The total Albuquerque population received a collective dose of 0.097 person-rem during 1989 from SNL, Albuquerque, operations. As in the previous year, SNL, Albuquerque, operations in 1989 had no adverse impact on the general public or on the environment. 46 refs., 20 figs., 31 tabs.

More Details

1989 environmental monitoring report, Tonopah Test Range, Tonopah, Nevada

Hwang, Hue-Su A.

This report summarizes the environmental surveillance activities conducted by Environmental Protection Agency (EPA) and Reynolds Electrical and Engineering Company (REECo) for the Tonopah Test Range (TTR) operated by Sandia National Laboratories (SNL). Other environmental compliance programs such as National Environmental Policy Act of 1969 (NEPA), environmental permits, environmental restoration, and waste management programs are also included. The maximum offsite dose impact from 1989 operations was 8.7 {times} 10{sup {minus}4} mrem as a result of an unusual occurrence. The population received a collective dose of 1.2 {times} 10{sup {minus}5} person-rem from this incidence, while the same populations received 4.94 person-rem from natural background radiation. The 1989 SNL, TTR operations had no adverse impact on the general public or the environment. 18 refs., 2 figs., 14 tabs.

More Details

Basic data report for drillholes at the H-11 complex (Waste Isolation Pilot Plant-WIPP)

Mercer, J.W.; Snyder, R.P.

Drillholes H-11b1, H-11b2, and H-11b3 were drilled from August to December 1983 for site characterization and hydrologic studies of the Culebra Dolomite Member of the Upper Permian Rustler Formation at the Waste Isolation Pilot Plant (WIPP) site in southeastern New Mexico. In October 1984, the three wells were subjected to a series of pumping tests designed to develop the wells, provide information on hydraulic communication between the wells, provide hydraulic properties information, and to obtain water samples for quality of water measurements. Based on these tests, it was determined that this location would provide an excellent pad to conduct a convergent-flow non-sorbing tracer test in the Culebra dolomite. In 1988, a fourth hole (H-11b4) was drilled at this complex to provide a tracer-injection hole for the H-11 convergent-flow tracer test and to provide an additional point at which the hydraulic response of the Culebra H-11 multipad pumping test could be monitored. A suite of geophysical logs was run on the drillholes and was used to identify different lithologies and aided in interpretation of the hydraulic tests. 4 refs., 6 figs., 6 tabs.

More Details

Far-field dispersal modeling for fuel-air-explosive devices

Glass, Micheal W.

A computer model for simulating the explosive dispersal of a fuel agent in the far-field regime is described and is applied to a wide variety of initial conditions to judge their effect upon the resulting fuel/air cloud. This work was directed toward modeling the dispersal process associated with Fuel-Air-Explosives devices. The far-field dispersal regime is taken to be that time after the initial burster charge detonation in which the shock forces no longer dominate the flow field and initial canister and fuel mass breakup has occurred. The model was applied to a low vapor pressure fuel, a high vapor pressure fuel and a solid fuel. A strong dependence of the final cloud characteristics upon the initial droplet size distribution was demonstrated. The predicted fuel-air clouds were highly non-uniform in concentration. 18 refs., 86 figs., 4 tabs.

More Details
Results 100101–100125 of 100,993
Results 100101–100125 of 100,993
Top