Publications

The Office of Environmental Management of the U.S. Department of Energy is responsible for the safe management and disposal of DOE owned defense spent nuclear fuel and high level waste (DSNF/DHLW). A desirable option, direct disposal of the waste in the potential repository at Yucca Mountain, depends on the final waste acceptance criteria, which will be set by DOE`s Office of Civilian Radioactive Waste Management (OCRWM). However, evolving regulations make it difficult to determine what the final acceptance criteria will be. A method of anticipating waste acceptance criteria is to gain an understanding of the DOE owned waste types and their behavior in a disposal system through a performance assessment and contrast such behavior with characteristics of commercial spent fuel. Preliminary results from such an analysis indicate that releases of 99Tc and 237Np from commercial spent fuel exceed those of the DSNF/DHLW; thus, if commercial spent fuel can meet the waste acceptance criteria, then DSNF can also meet the criteria. In large part, these results are caused by the small percentage of total activity of the DSNF in the repository (1.5%) and regulatory mass (4%), and also because commercial fuel cladding was assumed to provide no protection.

This document provides an overview of the processes used to access the performance of the Waste Isolation Pilot Plant (WIPP). The quantitative metrics used in the performance-assessment (PA) process are those put forward in the Environmental Protection Agency`s Environmental Standards for the Management and Disposal of Spent Nuclear Fuel, HIgh-LEvel and transuranic radioactive Wastes (40 CFR 191).

The preliminary criticality analysis that was done suggests that the possibility of achieving critical conditions cannot be easily ruled out without looking at the geochemical process of assembly or the dynamics of the operation of a critical assembly. The evaluation of a critical assembly requires an integrated, consistent approach that includes evaluating the following: (1) the alteration rates of the layers of the container and spent fuel, (2) the transport of fissile material or neutron absorbers, and (3) the assembly mechanisms that can achieve critical conditions. The above is a non-trivial analysis and preliminary work suggests that with the loading assumed, enough fissile mass will leach from the HEU multi-purpose canisters to support a criticality. In addition, the consequences of an unpressurized Oklo type criticality would be insignificant to the performance of an unsaturated, tuff repository.

This performance assessment characterized plausible treatment options conceived by the Idaho National Engineering Laboratory (INEL) for its spent fuel and high-level radioactive waste and then modeled the performance of the resulting waste forms in two hypothetical, deep, geologic repositories: one in bedded salt and the other in granite. The results of the performance assessment are intended to help guide INEL in its study of how to prepare wastes and spent fuel for eventual permanent disposal. This assessment was part of the Waste Management Technology Development Program designed to help the US Department of Energy develop and demonstrate the capability to dispose of its nuclear waste, as mandated by the Nuclear Waste Policy Act of 1982. The waste forms comprised about 700 metric tons of initial heavy metal (or equivalent units) stored at the INEL: graphite spent fuel, experimental low enriched and highly enriched spent fuel, and high-level waste generated during reprocessing of some spent fuel. Five different waste treatment options were studied; in the analysis, the options and resulting waste forms were analyzed separately and in combination as five waste disposal groups. When the waste forms were studied in combination, the repository was assumed to also contain vitrified high-level waste from three DOE sites for a common basis of comparison and to simulate the impact of the INEL waste forms on a moderate-sized repository, The performance of the waste form was assessed within the context of a whole disposal system, using the U.S. Environmental Protection Agency`s Environmental Radiation Protection Standards for Management and Disposal of Spent Nuclear Fuel, High-Level and Transuranic Radioactive Wastes, 40 CFR 191, promulgated in 1985. Though the waste form behavior depended upon the repository type, all current and proposed waste forms provided acceptable behavior in the salt and granite repositories.

CAMCON, the Compliance Assessment Methodology CONtroller, is an analysis system that assists in assessing the compliance of the Waste Isolation Pilot Plant (WIPP) with applicable long-term regulations of the US Environmental Protection Agency, including Subpart B of the Environmental Standards for the Management and Disposal of spent Nuclear Fuel, High-Level and Transuranic Radioactive Wastes, 40 CFR 191 and 40CFR268.6, which is the portion of the Land Disposal Restrictions implementing the Resource, Conservative, and Recovery Act of 1976, as amended that states the conditions for disposal of hazardous chemical wastes. This manual provides an architectural overview of the CAMCON system. Furthermore this manual presents guidelines and presents suggestions for programmers developing the many different types of software necessary to investigate various events and physical processes of the WIPP. These guidelines include user interface requirements, minimum quality assurance requirements, coding style suggestions, and the use of numerous software libraries developed specifically for or adapted for the CAMCON system.

This document presents the quality assurance (QA) procedures for Parameter Selection and Expert Judgment Panels used by the performance Assessment Department of Sandia National Laboratories, which directly supports the Waste Isolation Pilot Plant (WIPP). Parameter Selection QA procedures described herein will be incorporated into the general Performance Assessment Quality Assurance Procedures, QAP 2-3; the Expert Judgment Panel procedures will be incorporated into QAP 2-6. Both sets of procedures will apply to all Sandia and Sandia contractor activities related to performance assessment (except where the contractor has its own approved QA procedures). This report presents the philosophy behind the QA procedures, provides the standards adopted for performance assessment Parameter Selection and Expert Judgment Panels, and discusses the implementation of these standards.

This document presents the quality assurance (QA) philosophy and procedures for analyses and report reviews used by the Performance Assessment Department of Sandia National Laboratories, which directly supports the Waste Isolation Pilot Plant (WIPP). Analysis procedures described herein will be incorporated into the Performance Assessment Analysis Quality Assurance Procedures (QAP 2-4), and report review procedures will be incorporated into QAP 2-5; both will apply to all Sandia and Sandia contractor activities related to performance assessment (except where the contractor has its own approved QA procedures). This report presents the philosophy behind the OA procedures, provides the standards adopted for performance assessment analysis and report review, discusses the implementation of these standards, and summarizes the software executive package, CAMCON, which aids in implementing the standards.

The performance Assessment (PA) Department of Sandia National Laboratories annually compares the Waste Isolation Pilot Plant (WIPP) with the Environmental Protection Agency`s Environmental Radiation Protection Standards for Management and Disposal of Spent Nuclear Fuel, High-Level and Transuranic Radioactive Wastes, 40 CFR 191. To assist the analyst in these comparisons the PA Department developed CAMCON, the Compliance Assessment Methodology Controller, which creates an analysis system out of the diverse computer modeling codes needed for this interdisciplinary comparison. This reference manual describes the use of most of the codes in the CAMCON system that an analyst may use when performing the PA comparisons. Although some of the codes included in CAMCON have their own user`s guide, this manual summarizes these guides as well to provide the user with one comprehensive document of the codes within the CAMCON system.

This document presents the quality assurance (QA) philosophy and procedures for software used by the Performance Assessment Division of the Nuclear Waste Technology Department (NWTD) of Sandia National Laboratories, which directly supports the Waste Isolation Pilot Plant (WIPP). Software procedures described herein will be incorporated into the general Performance Assessment Quality Assurance Procedures (QAP 2-2) and will apply to all Sandia and Sandia contractor activities related to Performance Assessment (except where the contractor has its own NWTD-approved QA procedures). This report presented the philosophy behind the QA procedures, provides the standards adopted for Performance Assessment software, discusses the implementation of these standards, and summarizes the software executive package, CAMCON, which aids in implementing the standards. 24 refs., 6 figs., 5 tabs.

This report documents the data available as of August 1990 and used by the Performance Assessment Division of Sandia National Laboratories in its December 1990 preliminary performance assessment of the Waste Isolation Pilot Plant (WIPP). Parameter values are presented in table form for the geologic subsystem, engineered barriers, borehole flow properties, climate variability, and intrusion characteristics. Sources for the data and a brief discussion of each parameter are provided. 101 refs., 72 figs., 21 tabs.

This status report presents preliminary analyses of flow through the rooms, drifts, seals, and shafts of the Waste Isolation Pilot Plant (WIPP). The purpose of these analyses is to evaluate the importance of various components and parameters of the transuranic waste repository. These analyses are presented to show the current status of repository/shaft system modeling, and to provide input for evaluating proposed engineered modifications to the waste and rooms to ensure compliance with the Environmental Protection Agency's Environmental Standards for the Management and Disposal of Spent Nuclear Fuel, High-Level and Transuranic Waste. Detailed descriptions are given for nine computational models of the WIPP repository for either undisturbed or human intrusion conditions. Some models are refined versions of earlier models; others include rudimentary studies of an additional phenomenon, flow of generated gas. The models of an undisturbed repository substantiated the results of earlier models by showing that no waste leaves the vicinity of the disposal area in 10,000 yr. The models that studies gas flow agreed with this position; however, the models are too rudimentary to permit conclusive statements. The five models of the human intrusion event explored the importance of parameters that influence the flow of brine through the waste, establishing a base for understanding the behavior of the waste disposal rooms, drifts,and interbeds in the host rock. 63 refs., 92 figs., 29 tabs.