Publications

Melia, M.A., Renner, P.A., Karasz, E., Escarcega-Herrera, K., Taylor, J.M., Heiden, M.J., & Rodelas, J. (2023). Corrosion susceptibility of additively manufactured stainless steel [Conference Presentation]. 10.2172/2430764

Rodelas, J., Barrick, E.J., Ohlhausen, J.A., Robino, C., Susan, D.F., Brehm, J.R., Herrmann, J., Hattar, K., Demott, R., Small, K.A., Reece, M., Toledo, M.C., & Pisani, A. (2023). Rapid assessment of laser weld heat affected zone liquation cracking susceptibility in chromium boride-containing austenitic stainless steel [Conference Presentation]. 10.2172/2430711

Renner, P.A., Melia, M.A., Karasz, E., Escarcega-Herrera, K., Taylor, J.M., Schaller, R.F., Heiden, M.J., & Rodelas, J. (2023). Localized corrosion of additively manufactured stainless steel in atmospheric environments [Conference Presentation]. 10.2172/2431743

Barrick, E.J., Rodelas, J., Brehm, J.R., Demott, R., Duran, P., Hattar, K., Herrmann, J., Ohlhausen, J.A., Robino, C.V., & Small, K.A. (2022). The Influence of boride phase transformations on heat-affected zone liquation cracking susceptibility in laser welded 304L stainless steel [Conference Presentation]. 10.2172/2006054

Melia, M.A., Hariharan, K., Guo, X., Rodelas, J., Frankel, G.S., & Schindelholz, E.J. (2022). Effect of Melt Pool Boundaries on Repassivation of Selective Laser Melted Stainless Steel [Conference Presentation]. 10.2172/2005423

Small, K.A., Demott, R., Barrick, E.J., Rodelas, J., & Hattar, K. (2022). In-situ TEM laser heating for manipulation of cooling rates and observation of precipitate dissolution kinetics [Conference Presentation]. 10.2172/2006363

Noell, P., Rodelas, J., Wilson, D., Carroll, J.D., Boyce, B.L., & Michael, J.R. (2022). Characterizing Plasticity and Failure using In-situ EBSD [Conference Presentation]. 10.2172/2003321

Boyce, B.L., Salzbrenner, B., Jared, B.H., Rodelas, J., Madison, J., & Carroll, J.D. (2022). Stochastic failure in additively manufactured alloys [Conference Poster]. https://www.osti.gov/biblio/2002229

Barrick, E.J., Ohlhausen, J.A., Susan, D.F., Hattar, K., Herrmann, J., Duran, P., Rodelas, J., & Robino, C.V. (2022). Kinetics of phase transformations in boron-containing 304L stainless steel [Conference Presentation]. 10.2172/2001873

Melia, M.A., Karasz, E., Escarcega-Herrera, K., Taylor, J.M., Rosenberg, S.G., Kotula, P.G., Heiden, M.J., & Rodelas, J. (2022). How part surfaces influence corrosion for a laser powder bed fusion 316L stainless steel [Conference Presentation]. 10.2172/2001829

Small, K.A., Rodelas, J., Barrick, E.J., Demott, R., Robino, C.V., & Hattar, K. (2022). In-situ TEM laser heating for manipulation of cooling rates and observation of precipitate dissolution kinetics [Conference Proceeding]. 10.1017/S1431927622007516

Rodelas, J., Susan, D.F., Carroll, J.D., Huber, T., Profazi, C.A., Foulk, J.W., Jaramillo, C.E., Jauregui, L., & Dickens, S.M. (2021). Microstructural and Mechanical Analysis of Intermediate Temperature Equilibrium Phase Formation in Nitronic 60 Stainless Steel [Conference Presentation]. 10.2172/1886159

Melia, M.A., Schindelholz, E., Rodelas, J., Barr, C., Jared, B.H., & Kotula, P.G. (2021). Melt Pool Boundaries and the Corrosion of Laser Powder Fusion Stainless Steels [Conference Presentation]. 10.2172/1847458

Melia, M.A., Duran, J.G., Marshall, R., Katona, R.M., Schaller, R.F., Rodelas, J., Heiden, M.J., Jared, B.H., Kelly, R., & Schindelholz, E. (2021). Localized Corrosion of Additively Manufactured Stainless Steels [Conference Presentation]. 10.2172/1847457

Noell, P., Rodelas, J., Ghanbari, Z., & Laursen, C.M. (2020). Microstructural modification of additively manufactured metals by electropulsing. Additive Manufacturing, 33(C). 10.1016/j.addma.2020.101128

Heckman, N.M., Ivanoff, T., Roach, A.M., Jared, B.H., Tung, D.J., Huber, T., Saiz, D.J., Koepke, J.R., Rodelas, J., Madison, J., Salzbrenner, B., Swiler, L.P., Jones, R.E., & Boyce, B.L. (2020). Automated high-throughput tensile testing reveals stochastic process parameter sensitivity. Materials Science and Engineering: A, 772(C). 10.1016/j.msea.2019.138632

Rodelas, J., Susan, D.F., Maguire, M.C., Duran, P., Vieira, M.J., Foulk, J.W., Jaramillo, C.E., & Profazi, C.A. (2019). Thermal Processing Effects on Heat Affected Zone Liquation Cracking Susceptibility of Boron Micro-alloyed 304L Stainless Steel [Conference Poster]. https://www.osti.gov/biblio/1643236

Babuska, T.F., Wilson, M.A., Johnson, K.L., Whetten, S.R., Curry, J., Rodelas, J., Atkinson, C., Lu, P., Chandross, M.E., Krick, B.A., Michael, J.R., Argibay, N., Susan, D.F., & Kustas, A.B. (2019). Achieving high strength and ductility in traditionally brittle soft magnetic intermetallics via additive manufacturing. Acta Materialia, 180(C), pp. 149-157. 10.1016/j.actamat.2019.08.044

Noell, P., Rodelas, J., Ghanbari, Z., & Laursen, C.M. (2019). Microstructural Modification and Healing of Additively Manufactured Parts by Electropulsing. 10.2172/1570883

Melia, M.A., Rodelas, J., & Schindelholz, E. (2019). Corrosion of Additively Manufactured Stainless Steel - Process Structure and Performance [Conference Poster]. https://www.osti.gov/biblio/1642647

Rodelas, J., Susan, D.F., Kustas, A.B., Barr, A.K., & Vieira, M.J. (2019). Location-Specific Mechanical Property Enhancement of Atomically Ordered Fe-Co-V Soft Magnetic Alloys [Conference Poster]. https://www.osti.gov/biblio/1668919

Ghanbari, Z., Rodelas, J., Noell, P., & Susan, D.F. (2019). Furthering Physical Mechanical and Joining Metallurgy R&D Using the Gleeble(r) 3500 [Conference Poster]. https://www.osti.gov/biblio/1642132

Schindelholz, E., Rodelas, J., Melia, M.A., & Montoya, T. (2019). Corrosion Testing of Friction Stir Welded 304L Stainless Steel. 10.2172/1569520

Dickens, S.M., Noell, P., Rodelas, J., & Wilson, D. (2019). Identification of Twin Formation in Additively Manufactured Stainless Steel by In-Situ EBSD [Conference Poster]. 10.1017/S1431927619013692

Carroll, J.D., Casias, Z., & Rodelas, J. (2019). Round Robin Tensile Testing of 50% cold worked Nitronic 60. 10.2172/1762635

Susan, D.F., & Rodelas, J. (2019). Low-Sulfur Magnetic Stainless (LSMS): An Overview [Conference Poster]. https://www.osti.gov/biblio/1640851

Jared, B.H., Boyce, B.L., Madison, J., Rodelas, J., Saiz, D.J., Koepke, J.R., Huber, T., Ivanoff, T., Salzbrenner, B., Kernen, B.L., Moore, D.G., & Swiler, L.P. (2019). The Influence of Defects on the Performance of 316L Stainless Steel from Metal L-PBF [Presentation]. https://www.osti.gov/biblio/1648746

Rodelas, J. (2019). Laser Welding for High Reliability High Consequence Applications [Presentation]. https://www.osti.gov/biblio/1644833

Ivanoff, T., Madison, J., Foulk, J.W., Deibler, L.A., Rodelas, J., & Finfrock, C. (2019). Characterization of Interfacial Bond Surfaces in Explosively Bonded 304L Stainless Steel [Conference Poster]. https://www.osti.gov/biblio/1639372

Susan, D.F., & Rodelas, J. (2019). Advanced Processing of Fe-Co-2V "Hiperco" Soft Magnetic Alloy [Presentation]. https://www.osti.gov/biblio/1644476

Dickens, S.M., Noell, P., Rodelas, J., & Wilson, D. (2019). Identification of Twin Formation in Additively Manufactured Stainless Steel by In-Situ EBSD [Conference Poster]. 10.1017/S1431927619013692

Heiden, M.J., Deibler, L.A., Rodelas, J., Koepke, J.R., Tung, D.J., Saiz, D.J., & Jared, B.H. (2019). Evolution of 316L stainless steel feedstock due to laser powder bed fusion process. Additive Manufacturing, 25(C), pp. 84-103. https://doi.org/10.1016/j.addma.2018.10.019

Susan, D.F., Tung, D.J., Gorman, P., Rodelas, J., Profazi, C.A., Grant, R.P., & le Pham, H. (2018). Laser Welding of Multi-Cell Battery Packs [Conference Poster]. https://www.osti.gov/biblio/1592368

Tung, D.J., Rodelas, J., Maguire, M.C., Susan, D.F., & Carroll, J.D. (2018). Welding Soft Magnetic FeCoV Alloy Hiperco(r) 50A [Conference Poster]. https://www.osti.gov/biblio/1806919

Tung, D.J., & Rodelas, J. (2018). Weld Hot Cracking Susceptibility of Materials Additively Manufactured by a Laser Powder Bed Process [Conference Poster]. https://www.osti.gov/biblio/1593650

Rodelas, J., Tung, D.J., Barr, A.K., & Vieira, M.J. (2018). Weldability of Additively Manufactured 304L Stainless Steel [Conference Poster]. https://www.osti.gov/biblio/1575135

Susan, D.F., Kustas, A.B., Ghanbari, Z., Rodelas, J., & Michael, J.R. (2018). Process-Microstructure-Property Relationships in Fe-Co-2V [Conference Poster]. https://www.osti.gov/biblio/1575136

Melia, M.A., Nguyen, H.A., Rodelas, J., & Schindelholz, E. (2018). Investigations on the corrosion behavior of additively manufactured stainless steel [Conference Poster]. https://www.osti.gov/biblio/1592675

Melia, M.A., Schaller, R.F., Nguyen, H.A., Taylor, J.M., Rodelas, J., & Schindelholz, E. (2018). Characterization of local corrosion on 304L formed using the laser engineered network shape (LENS(r)) additive manufacturing technique [Conference Poster]. https://www.osti.gov/biblio/1562348

Melia, M.A., Schaller, R.F., Nguyen, H.A., Taylor, J.M., Rodelas, J., & Schindelholz, E. (2018). Corrosion of the 304L stainless steel produced by the laser engineered net shape (LENS) technique [Conference Poster]. https://www.osti.gov/biblio/1582195

Heiden, M.J., Deibler, L.A., Rodelas, J., Koepke, J.R., Tung, D.J., Saiz, D.J., & Jared, B.H. (2018). Recyclability of Metal Powder Feedstock in Additive Manufacturing: Characterization of 316L Stainless Steel [Conference Poster]. https://www.osti.gov/biblio/1581561

Rodelas, J., Heiden, M.J., Deibler, L.A., Koepke, J.R., Tung, D.J., Saiz, D.J., & Jared, B.H. (2018). Metal Powder Feedstock Reuse in Additive Manufacturing: Characterization of 316L Stainless Steel [Conference Poster]. https://www.osti.gov/biblio/1581728

Melia, M.A., Schaller, R.F., Nguyen, H.A., Taylor, J.M., Rodelas, J., & Schindelholz, E. (2018). The susceptibility to local corrosion for 304L additively manufactured by a high and low power laser engineered network shape (LENS) technique [Conference Poster]. https://www.osti.gov/biblio/1806535

Jared, B.H., Moore, D.G., Stair, S.L., Boyce, B.L., Madison, J., Ivanoff, T., Ostien, J.T., Johnson, K.L., Rodelas, J., Salzbrenner, B., Swiler, L.P., Foulk, J.W., Saiz, D.J., Kernen, B.L., Jost, E.W., & Miers, J.C. (2018). The Impact of Critical Defects on Material Performance and Science-Based Qualification for Metal Laser Powder Bed Fusion [Conference Poster]. https://www.osti.gov/biblio/1532607

Madison, J., Ivanoff, T., Jared, B.H., Swiler, L.P., Dejong, S.A., Boyce, B.L., Rodelas, J., & Salzbrenner, B. (2018). Aggregate Presence and Impact of 3D Defect Populations In AM Stainless Steel [Conference Poster]. https://www.osti.gov/biblio/1526367

Rodelas, J. (2018). Laser Welding for High Reliability High Consequence Applications [Presentation]. https://www.osti.gov/biblio/1511985

Ghanbari, Z., Rodelas, J., & Duran, P. (2018). Investigation of Hot-Ductility and Elevated Temperature Mechanical Behavior in AM and Wrought 304L [Presentation]. https://www.osti.gov/biblio/1515317

Rodelas, J., & Heiden, M.J. (2018). Preliminary Results of Wire-AM 308L LZH4 Builds [Presentation]. https://www.osti.gov/biblio/1515618

Heiden, M.J., Deibler, L.A., Rodelas, J., Koepke, J.R., Tung, D.J., Saiz, D.J., & Jared, B.H. (2018). 316L Stainless Steel Powder Reuse in Additive Manufacturing [Presentation]. https://www.osti.gov/biblio/1511999

Melia, M.A., Schaller, R.F., Nguyen, H.A., Taylor, J.M., Rodelas, J., & Schindelholz, E. (2018). Correlating microstructure to corrosion response for additively manufactured 304L stainless steel [Conference Poster]. https://www.osti.gov/biblio/1514786