Publications

Abstract not provided.

For the past two years Sandia National Laboratories (SNL) has been involved in developing and installing Remote Monitoring Systems (RMS) at a number of sites around the world. Through the cooperation of the various countries and facilities, it has been possible to collect data on the requirements and performance of these systems that are for monitoring the movement of spent nuclear fuel. The data collected shows that the front end detection method can be a very useful concept to reduce the amount of data that has to be collected and, more importantly, reviewed by inspectors. Spent fuel storage monitoring is a major part of the non-proliferation monitoring that must be done since spent fuel is the by-product of all the power and research reactors worldwide. The movement of spent fuel is easier in many respects to monitor since it always requires protective shielding. This paper will describe a number of the Remote Monitoring Systems that have been installed to monitor spent fuel movement and the resulting decrease in data from the use of a sensor-driven front detection system. The reduction of the data collected and stored is also important to remote monitoring since it decreases the time required to transmit the data to a review site.

An Image Compression and Authentication Module (ICAM) has been designed to perform the digitization, compression, and authentication of video images in a camera enclosure. The ICAM makes it possible to build video surveillance systems that protect the transmission and storage of video images. The ICAM functions with both NTSC 525 line and PAL 625 line cameras and contains a neuron chip (integrated circuit) permitting it to be interfaced with a local operating network which is part of the Modular Integrated Monitor System (MIMS). The MIMS can be used to send commands to the ICAM from a central controller or any sensor on the network. The ICAM is capable of working as a stand alone unit or it can be integrated into a network of other cameras. As a stand alone unit it sends its video images directly over a high speed serial digital link to a central controller for storage. A number of ICAMs can be multiplexed on a single coaxial cable. In this case, images are captured by each ICAM and held until the MIMS delivers commands for an individual image to be transmitted for review or storage. The ICAM can capture images on a time interval basis or upon receipt of a trigger signal from another sensor on the network. An ICAM which collects images based on other sensor signals, forms the basis of an intelligent {open_quotes}front end{close_quotes} image collection system. The burden of image review associated with present video systems is reduced by only recording the images with significant action. The cards used in the ICAM can also be used to decompress and display the compressed images on a NTSC/PAL monitor.