Publications Details

PVDF water-shock pressure transducer with 200-ns response

Johnson, D.E.; Hogeland, S.R.; Nelson, L.S.

The design, calibration, and preliminary test results for an underwater shock gauge are presented. The active element is a 25-{mu}m thick polyvinylidene fluoride shock sensor providing rise times as short as 50 ns. Fast rise time is essential to accurate recording of shock pulses with durations of only a few microseconds. The piezoelectric polymer provides a self-generating pressure sensor requiring neither amplification nor additional active electronic circuitry. The gauge package is designed to minimize electromagnetic interference from the high-voltage fire set used to power the exploding bridge wire pressure source. The gauge package is constructed to withstand the initial water shock as well as subsequent reactions in the water that result in strong water motion and bubble generation. Thin-film diaphragm sensors are not sturdy enough to withstand this environment. Initial tests show that the gauge responds in 200 ns in water and that low-frequency response is sufficient to allow recording for at least 40 {mu}s after the initial shock arrival.