Publications Details

Nonlinear ultrasonic technique for the quantification of dislocation density in additive materials

Bellotti, Aurelio; Kim, Jin Y.; Bishop, Joseph E.; Jared, Bradley H.; Susan, D.F.; Jacobs, Laurence J.

This research applies nonlinear ultrasonic techniques for the quantitative characterization of additively manufactured materials. The characterization focuses on identifying the dislocation density produced during the additive constructive process in order to increase confidence on a part's performance and the success of the manufacturing process. Second harmonic generation techniques based on the transmission of Rayleigh surface waves are used to measure the ultrasonic nonlinearity parameter, β, which has proven a quantitative indicator of dislocations but has not been fully proven in additive manufactured materials. 316L and 304L stainless steel parts made from Powder Bed Fusion and Laser Engineered Net Shaping are compared between AM techniques and with wrought manufactured counterparts. β is consistently higher for additive manufactured parts. An annealing heat treatment is applied to each specimen to reduce dislocation density. β expectedly decreases by annealing in all specimens. A linear ultrasonic measurement is made to evaluate the effectiveness of using nonlinear techniques. The ultrasonic attenuation is higher for additive manufactured parts and increases at higher frequencies.