Publications Details
Moisture permeation of environmental seals used in weapons
To allow more reliable estimates to be made of the amount of water that permeates through weapon environmental seals, we have generated extensive water permeability coefficient data for numerous o-ring materials, including, weapon-specific formulations of EPDM, butyl, fluorosilicone and silicone. For each material, data were obtained at several temperatures, ranging typically from 21[degrees]C to 80[degrees]C; for selected materials, the effect of relative humidity was monitored. Two different experimental techniques were used for most of the measurements, a permeability cup method and a weight gain/loss approach using, a sensitive microbalance. Good agreement was found between the results from the two methods, adding confidence to the reliability of the measurements. Since neither of the above methods was sufficiently sensitive to measure the water permeability of the butyl material at low temperatures, a third method, based on the use of a commercial instrument which employs a water-sensitive infrared sensor, was applied under these conditions.