Publications Details

Burnup Credit Validation of SCALE-4 Using Light-Water-Reactor Criticals

Bowman, S.M.; Hermann, O.W.; Brady, M.C.

The ANSI/ANS 8.1 criticality safety standard recommends validation and benchmarking of the calculational methods used in evaluating criticality safety limits for away-from-reactor applications. The lack of critical experiments with burned light-water reactor (LWR) fuel in racks or in casks necessitates the validation of burnup credit methods by comparison with LWR core criticals. These benchmarks are relevant because they test a methodology`s ability to predict spent fuel isotopic and to evaluate the reactivity effects of heterogeneities and strong absorbers. Data are available to perform analyses at precise state points. As part of the Burnup Credit Analysis Verification (BCAV) Task, the U.S. Department of Energy has sponsored analysis of selected reactor core critical configurations from commercial pressurized-water-reactors (PWRs). The initial analysis methodology used the SCALE-4 code system to analyze a set of reactor critical configurations from Virginia Power`s Slurry and North Anna reactors. However, the analysis procedure was complex and included the calculation of lumped fission products. The methodology has since been revised to simplify both the data requirements and the calculational procedure for the criticality analyst. This revised methodology is validated here by a comparison with three reactor critical configurations from Tennessee Valley Authority`s Sequoyah Unit 2 Cycle 3 and two from Virginia Power`s Slurry Unit 1 Cycle 2.