Publications Details

Adiabatic Heating in Modular Plasticity Models

Lester, Brian T.; Scherzinger, William M.

Plastic deformations in metals are dissipative. Some fraction of the dissipated mechanical energy (plastic work) is converted into thermal energy and serves as a heat source. In cases where the heat cannot be readily transferred to the environment, the local temperature will increase thereby producing variations in mechanical behaviors associated with temperature-dependent properties (e.g. thermal softening due to decreasing yield strengths). This issue is often referred to as "adiabatic heating as an adiabatic temperature condition corresponds to the limiting case where no heat transfer takes place. The impact of converting plastic work into heat on the mechanical response of metals has been long studied. Nonetheless, it still remains an issue. For instance, with respect to ductile failure, the second Sandia Fracture Challenge noted that accounting for plastic heat generation was necessary for predictions under dynamic loading conditions. Furthermore, both experimental and modeling efforts continue to be pursued to better describe and understand the effect of plastic work conversion into heat on structural responses. Noting the need for capturing plastic work conversion into heat in structural analyses, a simple and fairly traditional representation of these responses has been added into existing modular plasticity models in the Library of Advanced Materials for Engineering (LAME). Here, these capabilities are briefly described with the underlying theory and numerical implementation discussed in Sections 2 and 3, respectively. Examples of syntax are given in Section 4 and some verification exercises are found in Section 5. Simple structural analyses are presented in Section 6 to briefly highlight the impact of these features and concluding thoughts are given.