Data Set Details

Data Sets / Animations and simulations

Goal-Oriented Tensor Decompositions

Total Size: 34 GB

This data set includes various numerical simulations used for constructing and testing algorithms for goal-oriented tensor decompositions as described in https://arxiv.org/abs/2508.11139.  It consists of

  • 1E3_2D_TearingMode.exo:   The magnetic reconnection problem is a 2D low flow-Mach number compressible tearing mode simulation that follows the unstable evolution of a thin current sheet formed by a sheared magnetic field (Harris sheet) within an initially stationary velocity field.  The domain is a rectangle [0,4] x [-0.5,0.5] discretized on a uniform grid resulting in 401 and 201 grid points in the x and y directions, respectively. The computation is for a Lundquist number of 10^3 and consists of 500 time steps.  At each grid and time point, it contains the values of the magnetic field, density, Lagrange multiplier for enforcing divergence free magnetic field, momentum, temperature, and velocity.

  • output_2D_TearingMode_64x32_S_1E3.exo:  A smaller version of the above data set on a 64 x 32 mesh and 82 time steps that is useful for debugging.

  • 3D_IC_S_1e5_5_Tfinal_10_Every_3_Step.exo: The island coalescence problem follows the unstable evolution of two 3D current flux tubes (which in the cross plane become islands) embedded in a sheared magnetic field Harris sheet.  The domain is a cube [-1,1] x [-1,1] x [-1,1] discretized on a uniform grid with 129 grid points in each dimension and contains every third time step in the simulation resulting in 39 time steps total.  The simulation was carried out with a Lundquist number of 10^5.  It contains the same physics variables as the tearing mode problem above.

  • HCCI_t_359_408.mat:  A direct numerical simulation of turbulent combustion in conditions representing a homogeneous charge compression ignition (HCCI) engine. The simulation considers autoignition of a turbulent ethanol-air mixture in a 2D spatial domain, performed with the DNS code S3D.  The simulation is performed on a doubly periodic x-y spatial domain, discretized with an equip-spaced 672 x 672 grid. This version of the data contains time steps 360 through 409 during an ignition phase where more interesting dynamics occur.  It contains x and y velocities, temperature, pressure, and the mass fractions of 28 chemical species at each grid and time point.

Contributors

Phipps, Eric; Shadid, John; Dunlavy, Daniel; Kolla, Hemanth; Phillips, Edward

Related Publication

LDRD Final Report: In Situ Data Analysis Through Physics-informed Tensor Decompositions

Data Files

Transfer data using Globus

This data set is too large to download. Use Globus Transfer service to acquire this data.

  • 1E3_2D_TearingMode.exo (12 GB)
  • output_2D_TearingMode_64x32_S_1E3.exo (55 MB)
  • 3D_IC_S_1e5_5_Tfinal_10_Every_3_Step.exo (17 GB)
  • HCCI_t_359_408.mat (5 GB)

Source

10.2172/2586986

Fields

The tearing mode and island coalescence data files are MHD simulations on a Cartesian grid containing values of the magnetic field, density, Lagrange multiplier for enforcing divergence free magnetic field, momentum, temperature, and velocity at each spatial grid point and time step, as well as current, divergence of the magnetic field, and gradient of pressure at each mesh cell and time step.  The data is stored in the ExodusII format and can be read using standard NetCDF tools.

The HCCI data is turbulent combustion simulation stored as a Matlab MAT file containing values of x and y velocities, temperature, pressure, and the mass fractions of 28 chemical species at each grid and time point.  Itcan be read by Matlab and other tools such as python that support the MAT format.  Within the MAT file, the HCCI data is stored as a single dense tensor of size 672 x 672 x 33 x 626 using the dense tensor format from the Matlab Tensor Toolbox.

Sample Data Set

For the ExodusII files, the data is stored in a binary format containing values for each of the above nodal and cell variables at each time step.  For example, the first few entries of the x-component of the magnetic field in the file 1E3_2D_TearingMode.exo are:

vals_nod_var1 =

-0.983472705497841, -0.98347309306833, -0.983474255684171,  -0.983476193058505, -0.983478904713314, -0.983482389979538, -0.98348664799724, -0.983491677715817, -0.983497477894262, ...

For the HCCI data, the data is stored as a Matlab class (essentially a struct) with an integer array of sizes and single floating-point array containing the vectorization of the tensor.  The leading

>> HCCI_data.data(1:10)

ans =

0.2047 0.2040 0.2029 0.2015 0.1998 0.1978 0.1954 0.1928 0.1898 0.1867

Supplemental Information

The ExodusII files can be read and visualized using standard tools such as Paraview as well as any tool supporting NetCDF.  The HCCI data can be read by Matlab and other tools such as python that support the MAT format.

Coverage

Spatial Coverage

N/A

Temporal Coverage

N/A

Top