Publications

Nanometer-scale compositional structure in InAsxP1.InNYAsxPl.x-Y/InP, grown by gas-source molecular-beam epitaxy and in InAsl-xPJkAsl$b#InAs heterostructures heterostructures grown by metal-organic chemical vapor deposition has been characterized using cross-sectional scanning tunneling microscopy. InAsxP1-x alloy layers are found to contain As-rich and P-rich clusters with boundaries formed preferentially within (T 11) and (111) crystal planes. Similar compositional structure is observed within InNYAsxP1-x-Y alloy layers. Imaging of InAsl-xp@Asl#bY superlattices reveals nanometer-scale clustering within both the hAsI-.p and InAsl$bY alloy layers, with preferential alignment of compositional features in the direction. Instances are observed of compositional structure correlated across a heterojunction interface, with regions whose composition corresponds to a smaller unstrained lattice, constant relative to the surrounding alloy material appearing to propagate across the interface.

Piezoelectric effects on the optical properties of GaN/AlGaN multiple quantum wells (MQWS) have been investigated by picosecond time-resolved photoluminescence (PL) measurements. For MQWS with well thickness 30 and 40 the excitonic transition peak positions at 10 K in continuous wave (CW) spectra are red-shifted with respect to the GaN epilayer by 17 meV and 57 meV, respectively. The time-resolved PL spectra of the 30 and 40 well MQWS reveal that the excitonic transition is in fact blue-shifted at early delay times due to quantum confinement of carriers. The spectral peak position shifts toward lower energies as the delay time increases and becomes red-shifted at longer delay times. We have demonstrated that the results described above is due to the presence of the piezoelectric field in the GaN wells of GaN/AlGaN MQWS subject to elastic strain together with screening of the photoexcited carriers. By comparing experimental and calculation results, we conclude that the piezoelectric field strength in GaN/Al.15G~.85N MQWS has a lower limit value of about 560 kV/cm: The electron and hole wave function distributions have also been obtained. The implication of our findings on the practical applications of GaN based optoelectronic devices is also discussed.

Epitaxial growth of AlAs-InAs short-period superlattices on (001) InP can lead to heterostructures exhibiting strong, quasi-periodic, lateral modulation of the alloy composition; transverse satellites arise in reciprocal space as a signature of the compositional modulation. Using an x-ray diffractometer equipped with a position-sensitive x-ray detector, we demonstrate reciprocal-space mapping of these satellites as an efficient, nondestructive means for detecting and characterizing the occurrence of compositional modulation. Systematic variations in the compositional modulation due to the structural design and the growth conditions of the short-period superlattice are characterized by routine mapping of the lateral satellites. Spontaneous compositional modulation occurs along the growth front during molecular-beam epitaxy of (AlAs) (InAs)n short-period superlattices. The modulation is quasi-periodic and forms a lateral superlattice superimposed on the intended SPS structure. Corresponding transverse satellites arise about each reciprocal lattice point, and x-ray diffraction can be routinely used to map their local reciprocal-space structure. The integrated intensity, spacing, orientation, and shape of these satellites provide a reliable means for nondestructively detecting and characterizing the compositional modulation in short-period superlattices. The analytical efficiency afforded by the use of a PSD has enabled detailed study of systematic vacations in compositional modulation as a function of the average composition, the period, and the growth rate of the short- period superlattice

A variety of different plasma chemistries, including SF6, Cl2, IC1 and IBr, have been examined for dry etching of 6H-SiC in high ion density plasma tools (Inductively Coupled Plasma and Electron Cyclotron Resonance). Rates up to 4,500~"min-1 were obtained for SF6 plasmas, while much lower rates (S800~.min-') were achieved with Cl2, ICl and IBr. The F2- based chemistries have poor selectivity for SiC over photoresist masks (typically 0.4-0.5), but Ni masks are more robust, and allow etch depths 210pm in the SiC. A micromachining process (sequential etch/deposition (<2,000Angstrom min-1) for SiC steps) designed for Si produces relatively low etch rates.

A systematic study of the etch characteristics of GaN, AlN and InN has been performed with boron halides- (BI{sub 3} and BBr{sub 3}) and interhalogen- (ICl and IBr) based Inductively Coupled Plasmas. Maximum etch selectivities of -100:1 were achieved for InN over both GaN and AlN in the BI{sub 3} mixtures due to the relatively high volatility of the InN etch products and the lower bond strength of InN. Maximum selectivies of- 14 for InN over GaN and >25 for InN over AlN were obtained with ICl and IBr chemistries. The etched surface morphologies of GaN in these four mixtures are similar or better than those of the control sample.

Free-standing aligned carbon nanotubes have previously been grown above 7000C on mesoporous silica embedded with iron nanoparticles. Here, carbon nanotubes aligned over areas up to several square centimeters were grown on nickel-coated glass below 666oC by plasma-enhanced hot filament chemical vapor deposition. Acetylene (C2H2) gas was used as the carbon source and ammonia (NH3) gas was used as a catalyst and dilution gas. Nanotubes with controllable diameters from 20 to 400 nanometers and lengths from 0.1 to 50 micrometers were obtained. Using this method, large panels of aligned carbon nanotubes can be made under conditions that are suitable for device fabrication.

In a collaborative program between the United States Nuclear Regulatory Commission (USNRC) and the Nuclear Power Engineering Corporation (NUPEC) of Japan under sponsorship of the Ministry of International Trade and Ihdustry, the seismic behavior of Prestressed Concrete Containment Vessels (PCCV) is being investigated. A 1:10 scale PCCV model has been constructed by NUPEC and subjected to seismic simulation tests using the high performance shaking table at the Tadotsu Engineering Laboratory. A primary objective of the testing program is to demonstrate the capability of the PCCV to withstand design basis earthquakes with a significant safety margin against major damage or failure. As part of the collaborative program, Sandia National Laboratories (SNL) is conducting research in state-of-the-art analytical methods for predicting the seismic behavior of PCCV structures, with the eventual goal of understanding, validating, and improving calculations dated to containment structure performance under design and severe seismic events. With the increased emphasis on risk-informed- regulatory focus, more accurate ch&@erization (less uncertainty) of containment structural and functional integri~ is desirable. This paper presents results of post-test calculations conducted at ANATECH to simulate the design level scale model tests.

This report addresses various facts and myths concerning the Y2K (Year 2000) problem.

Surviving in a data-rich environment means understanding the difference between data and information. This paper reviews an environmental case study that illustrates that understanding and shows its importance. In this study, a decision problem was stated in terms of au economic-objective fimction. The function contains a term that defines the stochastic relationship between the decision and the information obtained during field chamctetition for an environmental contaminant. Data is defied as samples drawn or experimental realizations of a mudom fimction. Information is defined as the quantitative change in the value of the objective fiction as a result of the sample.

Wind energy researchers at Sandia National Laboratories have developed a small, lightweight, time- synchronized, robust data acquisition system to acquire long-term time-series data on a wind turbine rotor. A commercial data acquisition module is utilized to acquire data simultaneously from multip!e strain-gauge, analog, and digital channels. Acquisition of rotor data at precisely the same times as acquisition of ground data is ensured by slaving the acquisition clocks on the rotor- based data unit and ground-based units to the Global Positioning Satellite (GPS) system with commercial GPS receiver units and custom-built and programmed programmable logic devices. The acquisition clocks will remain synchronized within two microseconds indefinitely. Field tests have confirmed that synchronization can be maintained at rotation rates in excess of 350 rpm, Commercial spread-spectrum radio modems are used to transfer the rotor data to a ground- based computer concurrently with data acquisition, permitting continuous acquisition of data over a period of several hours, days or even weeks.

Abstract not provided.

Rapid detection of excursions in the concentration of organic contaminants in water that is being recycled is crucial to the more widespread acceptance of rinse water recycling as a method of reducing water usage in semiconductor manufacturing. In 1995 SEMATECH'SS116 PTAB (Project Technical Advisory Board) arbitrarily targeted a response time of 30s as the goal for the on-line detection of TOC (Total Oxidizable Carbon) in water - a goal thought to simpliilj the design of water recycling systems (less volume required for water storage in the recycle loop) and lead to more widespread adoption of recycling of spent rinse waters by the US semiconductor industry. A subsequent evaluation of the TOC analyzers commercially available in early 1996 demonstrated that the fastest response times were on the order of three minutes ljllef. 1]. This paper updates the 1996 evaluation of commercially available TOC analyzers by assessing modified versions of two of the previously evaluated analyzers and also anew analyzer that became commercially available in 1997.

Esperanzaite, ideally NaCazA12(As5+0.i)[As5+03 (OH)] (OH)2FJH20), Z =2, is a new mineral from the Mina h Esperarq Durango State, Mexico. The mineral occurs as blue-green botryoidal crystalline masses on rhyolite, with separate spheres up to 1.5 mm Y Deceased in diameter. Mobs hardness is 4.5, specific gravity 3.240h, and 3.36( 3)C.IC. Optical properties were measured in 589 nm light. Esperanzaite is biaxial (-), .Y= Y = Z= colorless, a 1.580(1), ~ 1.588( 1), and y 1.593(1 ); 2V0hs is 74(1 ~ and 2 }'CUIC is 76.3". Dispersion is medium, r < v, and optic axes are oriented as a A Z = +50.5o, b = Y, c P. X = +35". The five strongest X-ray diffraction maxima in the powder pattern are (~ /, hk~: 2.966,100, 13 i, 31 i, 031 ; 3.527,90, 220; 2.700,90,221,002, 040; 5.364>80, 001, 020; 4.796,80,011. Esperanzaite is monoclinic, u 9.687(5), b 10.7379(6), c 5.5523(7)& ~ 105.32( 1 )", space group P21/nz. The atomic arrangement of esperanzaite was solved by Direct Methods and Fourier analysis (R= 0.03 1). The Fundamental Building Block is formed of stacks of heteropolyhedral tetramers; the tetramers are formed of two arsenate tetrahedral and two Al octahedra, comer-linked in 4-member rings. The Fundamental Building Blocks are linked by irregular lda~j and Ca@ polyhedra.

The role of extended and point defects, and key impurities such as C, O and H, on the electrical and optical properties of GaN is reviewed. Recent progress in the development of high reliability contacts, thermal processing, dry and wet etching techniques, implantation doping and isolation and gate insulator technology is detailed. Finally, the performance of GaN-based electronic and photonic devices such as field effect transistors, UV detectors, laser diodes and light-emitting diodes is covered, along with the influence of process-induced or grown-in defects and impurities on the device physics.

Enhancement of the Zeeman energy of 2D conduction electrons near v = 1 by optical dynamic nuclear polarization (lINP), as observed by the Overhauser shift of the transport detected electron spin resonance, is measured quantitatively for the first time in GaAs/AIGaAs mukiquantum wells. The NMR signal enhancement is obtained under similar conditions in the same sample, allowing the hyperke coupling constant of 3.7T between between the nuclei and 2D conduction electrons to be measured for the first time. The potential to suppress the Zeeman energy by optical DNP is discussed in the context of its potential influence on Skyrmion formation.

The U.S. and Russian weapons dismantlement process is producing hundreds of tons of excess plutonium (Pu) and highly enriched uranium (HEU) fissile materials. The nuclear operations associated with the final disposition of these materials will be occurring in both countries for decades. A significant accident during these operations could delay the disposition process. Russia- U.S. collaborative efforts to address safety issues associated with disposition processes have been ongoing since 1993. The experience of these collaborative efforts have demonstrated the need for a systematic and formalized approach to identifjring and prioritizing collaborative projects. A systematic approach to the successfid implementation of a formal program will require the definition of year by year program objectives, specific technical program areas, a process for the prioritization and selection of projects, and identification of performance measures to evaluate the success of projects. Specialized working groups established for each technical area are needed to define research priorities, review research proposals, and recommend proposals for tiding. A systematic approach to the establishment of a formal U.S.-Russia cooperative program will serve to ensure the safety and continuity of disposition processes and reduce the nuclear proliferation risks presented by this material. The U.S. and Russian weapons dismantlement process is producing hundreds of tons of excess plutonium (Pu) and highly enriched uranium (HEU) fissile materials. The U.S. and Russia are both converting and blending HEU into low enriched uranium (LEU) for use in existing reactors. Russia also plans to fiel reactors with excess Pu. The U.S. is on a two-path approach for the disposition of excess Pu: (1) use of Pu in existing reactors and/or (2) immobilization of the Pu in glass or ceramics followed by geologic disposal. The fissile nuclear materials storage, handling, processing, and transportation processes associated with the disposition process will be occurring in both countries for decades. A significant accident at any point in the process could significantly delay the disposition process. Russia-U.S. collaborative efforts to address safety issues associated with nuclear processes required for the disposition of excess weapons grade nuclear materials were initiated in response to the 1993 Tomsk-7 accident. A joint Russia-U.S. team evaluated the causes of an explosion in a nuclear fuel reprocessing tank at the Tomsk-7.

For many years, Sandia National Laboratories has been involved in the development and application of rapid prototyping and dmect fabrication technologies to build prototype parts and patterns for investment casting. Sandia is currently developing a process called Laser Engineered Net Shaping (LENS~) to fabricate filly dense metal parts dwectly from computer-aided design (CAD) solid models. The process is similar to traditional laser-initiated rapid prototyping technologies such as stereolithography and selective laser sintering in that layer additive techniques are used to fabricate physical parts directly from CAD data. By using the coordinated delivery of metal particles into a focused laser beam apart is generated. The laser beam creates a molten pool of metal on a substrate into which powder is injected. Concurrently, the substrate on which the deposition is occurring is moved under the beam/powder interaction zone to fabricate the desired cross-sectiwal geometry. Consecutive layers are additively deposited, thereby producing a three-dmensional part. This process exhibits enormous potential to revolutionize the way in which metal parts, such as complex prototypes, tooling, and small-lot production parts, are produced. The result is a comple~ filly dense, near-net-shape part. Parts have been fabricated from 316 stainless steel, nickel-based alloys, H13 tool steel, and titanium. This talk will provide a general overview of the LENS~ process, discuss potential applications, and display as-processed examples of parts.

In direct laser metal deposition technologies, such as the Laser (LENS) process, it is important to understand and control the Engineered Net Shaping thermal behavior during fabrication. With this control, components can be reliably fabricated with desired structural material properties. This talk will describe the use of contact and imaging techniques to monitor the thermal signature during LENS processing. Recent results show a direct correlation between thermal history and material properties, where the residual stress magnitude decreases as the laser power, and therefore thermal signature, increases. Development of an understanding of solidification behavior, residual stress, and microstructural evolution with respect to thermal behavior will be discussed.

Current and future generations of sophisticated compound semiconductor devices require the ability for submicron scale patterning. The situation is being complicated since some of the new devices are based on a wider diversity of materials to be etched. Conventional IUE (Reactive Ion Etching) has been prevalent across the industry so far, but has limitations for materials with high bond strengths or multiple elements. IrI this paper, we suggest high density plasmas such as ECR (Electron Cyclotron Resonance) and ICP (Inductively Coupled Plasma), for the etching of ternary compound semiconductors (InGaP, AIInP, AlGaP) which are employed for electronic devices like heterojunction bipolar transistors (HBTs) or high electron mobility transistors (HEMTs), and photonic devices such as light-emitting diodes (LEDs) and lasers. High density plasma sources, opeiating at lower pressure, are expected to meet target goals determined in terms of etch rate, surface morphology, surface stoichiometry, selectivity, etc. The etching mechanisms, which are described in this paper, can also be applied to other III-V (GaAs-based, InP-based) as well as III-Nitride since the InGaAIP system shares many of the same properties.

Inductively coupled plasma (ICP) etching characteristics of GaSb and AIGaAsSb have been investigated in BC13/Ar and Clz/Ar plasmas. The etch rates and selectivity between GaSb and AIGaAsSb are reported as functions of plasma chemistry, ICP power, RF self-bias, and chamber pressure. It is found that physical sputtering resorption of the etch products plays a dominant role in BC13/Ar ICP etching, while in Clz/Ar plasma, the chemical reaction dominates the etching. GaSb etch rates exceeding 2 ~rnhnin are achieved in Clz/Ar plasmas with smooth surfaces and anisotropic profiles. In BC13/Ar plasmas, etch rates of 5100 Mmin and 4200 Mmin are obtained for GaSb and AIGaAsSb, respectively. The surfaces of both GaSb and AIGaAsSb etched in BC13/Ar plasmas remain smooth and stoichiometric over the entire range of plasma conditions investigated. This result is attributed to effective removal of etch products by physical sputtering. For a wide range of plasma conditions, the selectivity between GaSb and AIGaAsSb is close to unity, which is desirable for fabricating etched mirrors and gratings for Sb-based mid-IR laser diodes.

This paper presents an analysis of a decentralized coordination strategy for organizing and controlling a team of mobile robots performing collective search. The alpha-beta coordination strategy is a family of collective search algorithms that allow teams of communicating robots to implicitly coordinate their search activities through a division of labor based on self-selected roIes. In an alpha-beta team. alpha agents are motivated to improve their status by exploring new regions of the search space. Beta a~ents are conservative, and reiy on the alpha agents to provide advanced information on favorable regions of the search space. An agent selects its current role dynamically based on its current status value relative to the current status values of the other team members. Status is determined by some function of the agent's sensor readings, and is generally a measurement of source intensity at the agent's current location. Variations on the decision rules determining alpha and beta behavior produce different versions of the algorithm that lead to different global properties. The alpha-beta strategy is based on a simple finite-state machine that implements a form of Variable Structure Control (VSC). The VSC system changes the dynamics of the collective system by abruptly switching at defined states to alternative control laws . In VSC, Lyapunov's direct method is often used to design control surfaces which guide the system to a given goal. We introduce the alpha-beta aIgorithm and present an analysis of the equilibrium point and the global stability of the alpha-beta algorithm based on Lyapunov's method.

Liquid flow cells have been fabricated to prepare an array of QCMS operating simultaneously for detection and identification of VOCS in water. TWO signals, a tlequency response and a damping voltage response, were obtained per resonator. A blank QCM was used as a reference to account for changes in liquid density and viscosity. Nine different polymer coatings applied using a spin coat technique have been examined for VOC response under liquid flow conditions. A matrix of three classes of VOCS were examined for each coating with four chemicals in each class. The three classes of VOCS are polar, nonpolar and chlorinated. A pattern recognition technique, called visually empirical region of influence (VERI), was used to cluster the responses in n-dimensional space. Chemicals within a class varying by only one methyl group (e.g., toluene and xylene) are easily discriminated using only two different coatings with three different QCM responses. All chemicak were easily separated and detected with a total of 5 films and 6 responses with >99% accuracy.

When dealing with measured data from dynamic systems we often make the tacit assumption that the data are generated by linear dynamics. While some systematic tests for linearity and determinism are available - for example the coherence fimction, the probability density fimction, and the bispectrum - fi,u-ther tests that quanti$ the existence and the degree of nonlinearity are clearly needed. In this paper we demonstrate a statistical test for the nonlinearity exhibited by a dynamic system excited by Gaussian random noise. We perform the usual division of the input and response time series data into blocks as required by the Welch method of spectrum estimation and search for significant relationships between a given input fkequency and response at harmonics of the selected input frequency. We argue that systematic tests based on the recently developed statistical method of surrogate data readily detect significant nonlinear relationships. The paper elucidates the method of surrogate data. Typical results are illustrated for a linear single degree-of-freedom system and for a system with polynomial stiffness nonlinearity.

Advances in fast, pulsed-power technologies have resulted in the development of very high current drivers that have current rise times - 100 ns. The largest such pulsed power drive r today is the new Z accelerator located at Sandia National Laboratories in Albuquerque, New Mexico. Z is capable of delivering more than 20 MA with a time-to-peak of 105 ns to low inductance (- 1 nH)loads. Such large drivers are capable of directly generating magnetic fields approaching 3 kT in small, 1 -cm3, volumes. In addition to direct field generation, Z can be used to compress an applied, axial seed field with a plasma. Flux compression scheme~: are not new and are, in fact, the basis of all explosive flux-compression generators but we propose the use of plasma armatures rather than solid, conducting armatures. We will present experimental results from the Z accelerator in which magnetic fields - 2 kT are generated and measured with several diagnostics. Issues such as energy loss in solid conductors and dynamic response of current-carrying conductors to very large magnetic fields will be reviewed in context with Z experiments. We will describe planned flux-compression experiments that are expected to create the highest-magnitude uniform-field volumes yet attained in the laboratory.

Straightforward algebraic expressions describing the elastic wavefield produced by a line source of finite length are derived in circular cylindrical coordinates. The surrounding elastic medium is assumed to be both homogeneous and isotropic, anc[ the source stress distribution is considered axisymmetic. The time- and space-domain formulae are accurate at all distances and directions from the source; no fa-field or long-wavelength assumptions are adopted for the derivation. The mathematics yield a unified treatment of three different types of sources: an axial torque, an axial force, and a radial pressure. The torque source radiates only azirnuthally polarized shear waves, whereas force and pressure sources generate simultaneous compressional and shear radiation polarized in planes containing the line source. The formulae reduce to more familiar expressions in the two limiting cases where the length of the line source approaches zero and infinity. Far-field approximations to the exact equations indicate that waves radiated parallel to the line source axI.s are attenuated relative to those radiated normal to the axis. The attenuation is more severe for higher I?equencies and for lower wavespeeds. Hence, shear waves are affected more than compressional waves. This fi-equency- and directiondependent attenuation is characterized by an extremely simple mathematical formula, and is readily apparent in example synthetic seismograms.

Exponential-13,6 (EXP-13,6) potential pammeters for 750 gases composed of 48 elements were determined and assembled in a database, referred to as the JCZS database, for use with the Jacobs Cowperthwaite Zwisler equation of state (JCZ3-EOS)~l) The EXP- 13,6 force constants were obtained by using literature values of Lennard-Jones (LJ) potential functions, by using corresponding states (CS) theory, by matching pure liquid shock Hugoniot data, and by using molecular volume to determine the approach radii with the well depth estimated from high-pressure isen- tropes. The JCZS database was used to accurately predict detonation velocity, pressure, and temperature for 50 dif- 3 Accurate predictions were also ferent explosives with initial densities ranging from 0.25 glcm3 to 1.97 g/cm . obtained for pure liquid shock Hugoniots, static properties of nitrogen, and gas detonations at high initial pressures.

Foam evokes many different images: waves breaking at the seashore, the head on a pint of Guinness, an elegant dessert, shaving, the comfortable cushion on which you may be seated... From the mundane to the high tech, foams, emulsions, and cellular solids encompass a broad range of materials and applications. Soap suds, mayonnaise, and foamed polymers provide practical motivation and only hint at the variety of materials at issue. Typical of mukiphase materiaIs, the rheoIogy or mechanical behavior of foams is more complicated than that of the constituent phases alone, which may be gas, liquid, or solid. For example, a soap froth exhibits a static shear modulus-a hallmark of an elastic solid-even though it is composed primarily of two Newtonian fluids (water and air), which have no shear modulus. This apparent paradox is easily resolved. Soap froth contains a small amount of surfactant that stabilizes the delicate network of thin liq- uid films against rupture. The soap-film network deforms in response to a macroscopic strain; this increases interracial area and the corresponding sur- face energy, and provides the strain energy of classical elasticity theory [1]. This physical mechanism is easily imagined but very challenging to quantify for a realistic three-dimensional soap froth in view of its complex geome- try. Foam micromechanics addresses the connection between constituent properties, cell-level structure, and macroscopic mechanical behavior. This article is a survey of micromechanics applied to gas-liquid foams, liquid-liquid emulsions, and cellular solids. We will focus on static response where the foam deformation is very slow and rate-dependent phenomena such as viscous flow can be neglected. This includes nonlinear elasticity when deformations are large but reversible. We will also discuss elastic- plastic behavior, which involves yield phenomena. Foam structures based on polyhedra packed to fill space provide a unify- ing geometrical theme. Because a two-dimensional situation is always easier to visualize and usually easier to analyze, the roots of foam micromechanics lie in the plane packed with polygons. There are striking similarities as well as obvious differences between 2D and 3D.

Security technologies are not the answer to all school security problems. However, they can be an excellent tool for school administrators and security personnel when incorporated into a total security strategy involving personnel, procedures, and facility layout. Unfortunately, very few of the tougher security problems in schools have solutions that are affordable, effective, and acceptable. Like any other type of facility, a school's security staff must understand the strengths and limitations of the security measures they are c

This paper explores two potential applications of Virtual Reality (VR) to international nuclear safeguards: training and information organization and navigation. The applications are represented by two existing prototype systems, one for training nuclear weapons dismantlement and one utilizing a VR model to facilitate intuitive access to related sets of information.

The paper presents an investigation of the impacts of deregulation on the reliability, in terms of capacity adequacy, of a large multi-arm power pool. The study was conducted using a vwsirm of a Monte Carlo simulation-based bulk power system rdiability model called NA.RI'. The study examined expected ohanges in opmating policies and other changes expected under deregulation and Gorwludes that reliabtity is Uke\ y to be signific~tly degraded at least until the transmission network can be strengthen.

Self-aligned GaAs JFET narrowband amplifiers operating at 2.4 GHz were designed and fabricated with both discrete WETS as a hybrid amplifier and as RFICS. Enhancement-mode JFETs were used in order to be compatible with complementary digital logic. Hybrid amplifiers achieved 8-10 dB of gain at 2.4 GHz and 1 mW DC bias level. The RFIC achieved 10 dB of gain at 24 GHz and 2 mW DC bias level.

We report in this paper a study of the effective mass in thin oxide Si-MOSFETs, using the temperature dependence of the Shubnikov-de Haas (SdH) effect and following the methodology developed by Smith and Stiles.

Plasma, vapor and debris associated with an impact or explosive event have been demonstrated in the laboratory to produce radiofrequency and optical electromagnetic emissions that can be diagnostic of the event. Such effects could potentially interfere with communications or remote sensing equipment if an impact occurred, for example, on a satellite. More seriously, impact generated plasma could end the life of a satellite by mechanisms that are not well understood and not normally taken into account in satellite design. For example, arc/discharge phenomena resulting from highly conductive plasma acting as a current path across normally shielded circuits may have contributed to the loss of the Olympus experimental communications satellite on August 11, 1993. The possibility of significant storm activity during the Leonid meteor showers of November 1998, 1999 and 2000 (impact velocity, 72 km/s) has heightened awareness of potential vulnerabilities from hypervelocity electromagnetic effects to orbital assets. The concern is justified. The amount of plasma, electrostatic charge and the magnitude of the resulting currents and electric fields scale nearly as the cube of the impact velocity. Even for microscopic Leonid impacts, the amount of plasma approaches levels that could be dangerous to spacecraft electronics. The degree of charge separation that occurs during hypervelocity impacts scales linearly with impactor mass. The resulting magnetic fields increase linearly with impactor radius and could play a significant role in our understanding of the paleomagnetism of planetary surfaces. The electromagnetic properties of plasma produced by hypervelocity impact have been exploited by researchers as a diagnostic tool, invoked to potentially explain the magnetically jumbled state of the lunar surface and blamed for the loss of the Olympus experimental communications satellite. The production of plasma in and around an impact event can lead to several effects: (1) the plasma provides a significant perturbation to the ambient magnetic field via the electromagnetic pulse; (2) it supports the production of transient radiofrequency electromagnetic fields; (3) it charges ejected debris which, because of inertial separation, leads to significant electrostatic and magnetostatic field production; and (4) its high electrical conductivity provides a convenient path for discharge of the resulting high electrostatic fields. Effects (1) and (2) have been discussed by the authors elsewhere. Effects (3) and (4) will be discussed here. Typical studies of kinetic energy warheads focus on lethality as a function of impactor momentum or energy as they couple mechanically to the target. At high enough energies, however, additional physical processes come into play. Vaporization plays an important role and a partially ionized plasma can form. Impact-generated plasma, charged debris and magnetic fields have been characterized by laboratory hypervelocity impact experiments and are shown to be more abundant when certain easily ionized materials (such as alkali metals) are used in either projectile or target.

The Waste Isolation Pilot Plant (WIPP) is a deep underground nuclear waste repository certified by the U.S. Environmental Protection Agency ,(EPA) to store transuranic defense-related waste contaminated by small amounts of radioactive materials. Located at a depth of about 655 meters below the surface, the facility is sited in southeastern New Mexico, about 40 Department of Energy underground facilities, waste disposal. kilometers east of the city of Carlsbad, New Mexico. The U.S. (DOE) managed the design and construction of the surface and and remains responsible for operation and closure following The managing and operating contractor for the DOE at the WIPP, Westinghouse Electric Corporation, maintains two rechmiant seismic monitoring systems located at the surface and in the underground. This report discusses two earthquakes detected by the seismic monitoring system, one a duratior magnitude 5.0 (Md) event located approximately 60 km east-southeast of the facility, and another a body-wave magnitude 5.6 (rob) event that occurred approximately 260 kilometers to the south-southeast.

Abstract not provided.

As an ongoing part of the collaborative efforts between the Cooperative Monitoring Center (CMC) at Sandia National Laboratories, the United States Arms Control and Disarmament Agency (ACDA), and U.S. Department of Energy (DOE), staff from the CMC served as faculty in conducting a workshop in Shanghai, China. Sponsor of the workshop was the Regional Centre for Strategic Studies (RCSS) based in Colombo, Sri Lanka. The workshop included participants from throughout South Asia and China. The CMC presented four sessions related to the role of monitoring technologies in promoting regional security and building confidence among nations. Participation in these workshops supports U.S. efforts to further regional cooperation and promote arms control, nonproliferation and other cooperative securily measures and supplements efforts funded by DOE and ACDA over the past four years. The RCSS Shanghai meeting permitted a continued CMC involvement in regionally conducted training for anew generation of leaders in government, the military, and academia throughout South Asia and China. Nuclear issues are clearly a dominant South Asian concern since the nuclear tests of May 1998. However, there remains a strong interest in identifying opportunities for increased trade and reduced tensions in other areas. The RCSS and other regional organizations are enthusiastic about continued CMC involvement in future regional courses.

A multi-attribute utility analysis is applied to the decision to select a treatment method for the management of aluminum-based spent nuclear i%el (A1-SNF) owned by the United States Department of Energy (DOE). DOE will receive, treat, and temporarily store Al- SNF, most of which is composed of highly enriched uranium, at its Savannah River Site in South Carolina. DOE intends ultimately to send the treated Al-SNJ? to a geologic repository for permanent disposal. DOE initially considered ten treatment alternatives for the management of A1-SNF, and has narrowed the choice to two of these the direct disposal and melt and dilute alternatives. The decision analysis presented in this document focuses on a decision between these two remaining alternatives.

The HI616 shipping container is a certified type B(U) packaging used by the Department of Energy (DOE) to ship tritium in support of defense programs. During the 1997 recertification of the container, DOE became concerned about the possible cracking of the polyurethane foam in the overpacks of the 2300 containers currently in service. In response, Sandia National Laboratories (SNL) initiated a radiographic inspection program to determine if cracking of the foam was occurring in the H1616 overpacks. SNL developed the radiographic technique for inspecting the foam and contracted the Savannah River Site's Tritium Engineering division to inspect a representative sample of overpacks in service. This report details the development process and the results of all of the radiography performed both at SNL and Savannah River.

As computing assumes a more central role in managing the nuclear stockpile, the consequences of an erroneous computer simulation could be severe. Computational failures are common in other endeavors and have caused project failures, significant economic loss, and loss of life. This report examines the causes of software failure and proposes steps to mitigate them. A formal verification and validation program for scientific software is recommended and described.

The research summarized in this report is the result of a two-year effort that has focused on evaluating the viability of wavelet bases for the solution of partial differential equations. The primary objective for this work has been to establish a foundation for hierarchical/wavelet simulation methods based upon numerical performance, computational efficiency, and the ability to exploit the hierarchical adaptive nature of wavelets. This work has demonstrated that hierarchical bases can be effective for problems with a dominant elliptic character. However, the strict enforcement of orthogonality was found to be less desirable than weaker semi-orthogonality or bi-orthogonality for solving partial differential equations. This conclusion has led to the development of a multi-scale linear finite element based on a hierarchical change of basis. The reproducing kernel particle method has been found to yield extremely accurate phase characteristics for hyperbolic problems while providing a convenient framework for multi-scale analyses.

Early in 1994, the Department of Energy assigned Sandia National Laboratories the responsibility for designing and providing the welding system for the girth weld for the AT-400A containment vessel. (The AT-400A container is employed for the shipment and long-term storage of the nuclear weapon pits being returned from the nation's nuclear arsenal.) Mason Hanger Corporation's Pantex Plant was chosen to be the production facility. The project was successfully completed by providing and implementing a turnkey welding system and qualified welding procedure at the Pantex Plant. The welding system was transferred to Pantex and a pilot lot of 20 AT-400A containers with W48 pits was welded in August 1997. This document is intended to bring together the AT-400A welding system and product (girth weld) requirements and the activities conducted to meet those requirements. This document alone is not a complete compilation of the welding development activities but is meant to be a summary to be used with the applicable references.

The goal is the development of materials that are highly sensitive and selective for chid chemicals and biochemical (such as insecticides, herbicides, proteins, and nerve agents) to be used as sensors, catalysts and separations membranes. Molecular modeling methods are being used to tailor chiral molecular recognition sites with high affinity and selectivity for specified agents. The work focuses on both silicate and non-silicate materials modified with chirally-pure fictional groups for the catalysis or separations of enantiomerically-pure molecules. Surfactant and quaternary amine templating is being used to synthesize porous frameworks, containing mesopores of 30 to 100 angstroms. Computer molecukw modeling methods are being used in the design of these materials, especially in the chid surface- modi~ing agents. Molecular modeling is also being used to predict the catalytic and separations selectivities of the modified mesoporous materials. The ability to design and synthesize tailored asymmetric molecular recognition sites for sensor coatings allows a broader range of chemicals to be sensed with the desired high sensitivity and selectivity. Initial experiments target the selective sensing of small molecule gases and non-toxic model neural compounds. Further efforts will address designing sensors that greatly extend the variety of resolvable chemical species and forming a predictive, model-based method for developing advanced sensors.

Comprehensive management of the battle-space has created new requirements in information management, communication, and interoperability as they effect surveillance and situational awareness. The objective of this proposal is to expand intelligent controls theory to produce a uniquely powerful implementation of distributed ground-based measurement incorporating both local collective behavior, and interoperative global optimization for sensor fusion and mission oversight. By using a layered hierarchal control architecture to orchestrate adaptive reconfiguration of autonomous robotic agents, we can improve overall robustness and functionality in dynamic tactical environments without information bottlenecks. In this concept, each sensor is equipped with a miniaturized optical reflectance modulator which is interactively monitored as a remote transponder using a covert laser communication protocol from a remote mothership or operative. Robot data-sharing at the ground level can be leveraged with global evaluation criteria, including terrain overlays and remote imaging data. Information sharing and distributed intelli- gence opens up a new class of remote-sensing applications in which small single-function autono- mous observers at the local level can collectively optimize and measure large scale ground-level signals. AS the need for coverage and the number of agents grows to improve spatial resolution, cooperative behavior orchestrated by a global situational awareness umbrella will be an essential ingredient to offset increasing bandwidth requirements within the net. A system of the type described in this proposal will be capable of sensitively detecting, tracking, and mapping spatial distributions of measurement signatures which are non-stationary or obscured by clutter and inter- fering obstacles by virtue of adaptive reconfiguration. This methodology could be used, for example, to field an adaptive ground-penetrating radar for detection of underground structures in urban environments and to detect chemical species concentrations in migrating plumes. Given is our research in these areas and a status report of our progress.

This report describes the results of a Sandia Laboratov Directed Research & Development project to develop a technique that can identifi atoms in atomically engineered nanostructures. The report provides a detailed description of the experimental measurement techniques and subsequent image analysis procedures used in the identification process, followed by examples of the technique's successful application to several atomic surface features. Use of this technique requires the experimental measurement of both constant-current topographic and multi-bias conductance data from an atomic surface with the scanning tunneling microscope. These measurements are rendered as a collection of topographic and single-bias conductance images of the surface. Image pixels are then grouped into classes by a computed grouping algorithm, according to the shared conductance characteristics exhibited at each pixel. The image pixels are then color-coded by class to produce a false-color image of the scanned surface that chemically distinguishes surface electronic features over the entire area of the measured atomic surface.

Technical support for the Hanford Tank Closure Program focused on evaluation of concepts for immobilization of residual contaminants in the Hanford AX tanks and underlying soils, and identification of cost-effective approaches to improve long-term performance of AX tank farm cIosure systems. Project objectives are to develop materials or engineered systems that would significantly reduce the radionuclide transport to the groundwater from AX tanks containing residual waste. We pursued several studies that, if implemented, would help achieve these goals. They include: (1) tank fill design to reduce water inilltration and potential interaction with residual waste; (2) development of in-tank getter materials that would specifically sorb or sequester radionuclides; (3) evaluation of grout emplacement under and around the tanks to prevent waste leakage during waste retrieval or to minimize water infiltration beneath the tanks; (4) development of getters that will chemically fix specific radionuclides in soils under tanks; and (5) geochemical and hydrologic modeling of waste-water-soil-grout interactions. These studies differ in scope from the reducing grout tank fill employed at the Savannah River Site in that our strategy improves upon tank fill design by providing redundancy in the barriers to radionuclide migration and by modification the hydrogeochemistry external to the tanks.

Abstract not provided.

Sol-gel chemistry has been the focus of much attention in the design and preparation of highly crosslinked polysiloxane gels. Preparation of sol-gel processed silica or polysilesquioxane gels is carried out by the hydrolysis and condensation of alkoxysilyl monomers, usually in the presence of catalytic acid or base and an excess of water. Removal of the alcohol and water byproducts of the condensation reactions, in addition to the alcohol needed to co-dissolve the hydrophobic monomers with water, leads to substantial shrinkage during drying of the resulting gels. This limits the utility of sol-gel processing for applications requiring net-shape casting of artifacts, crack free coatings, or low vaporous organic contaminants (VOCs). It would be advantageous to have a sol-gel process based on an organosilicon monomer that would not require water as a reactant or produce water and alcohol condensation products and still result in siloxane network polymers capable of forming gels. Here, the authors show the synthesis and preparation of a novel sol-gel monomer which can easily be polymerized by ring opening polymerization to give highly crosslinked polysiloxane gels with no condensation byproducts.

An air sparging and high vacuum extraction was installed as an alternative to a containment pump and treat system to reduce the long-term remediation schedule. The site is located at the DOE Mound facility in Miamisburg, Ohio, just south of Dayton. The air sparging system consists of 23 wells interspersed between 17 soil vapor extraction wells. The SVE system has extracted about 1,500 lbs of VOCs in five months. The air sparging system operated for about 6 weeks before shutdown due to suspected biochemical fouling. Technical data are presented on the operating characteristics of the system.

Advanced radiographic applications require a constant source size less than 1 mm. To study the time history of a relativistic electron beam as it interacts with a bremsstrahlung converter, one of the diagnostics they use is a multi-frame time-resolved hard x-ray camera. They are performing experiments on the ETA-II accelerator at Lawrence Livermore National Laboratory to investigate details of the electron beam/converter interactions. The camera they are using contains 6 time-resolved images, each image is a 5 ns frame. By starting each successive frame 10 ns after the previous frame, they create a 6-frame movie from the hard x-rays produced from the interaction of the 50-ns electron beam pulse.

The authors report 77K operation of an optically pumped vertical cavity surface emitting laser with an Sb-based cavity. The structure consists of 15 and 20 pair AlGaAsSb/AlAsSb top and bottom reflectors and a bulk InGaAs active region.