Publications

The relatively thin web of salt that separates Bayou Choctaw Caverns 15 and 17 was evaluated using the finite-element method. The stability calculations provided insight as to whether or not any operationrestrictions or recommendations are necessary. Because of the uncertainty in the exact dimensions of the salt web, various web thicknesses were examined under different operating scenarios that included individual cavern workovers and drawdowns. Cavern workovers were defined by a sudden drop in the oil side pressure at the wellhead to atmospheric. Workovers represent periods of low cavern pressure. Cavern drawdowns were simulated by enlargening the cavern diameters, thus decreasing the thickness of the web. The calculations predict that Cavern 15 dominates the behavior of the web because of its larger diameter. Thus, giventhe choice of caverns, Cavern 17 should be used for oil withdrawal in order to minimize the adverse impacts on web resulting from pressure drops or cavern enlargement. From a stability point of view, maintaining normal pressures in Cavern 15 was found to be more important than operating the caverns as a gallery where both caverns are maintained at the same pressure. However, during a workover, it may be prudent to operate the caverns under similar pressures to avoid the possibility of a sudden pressure surge at the wellhead should the web fail.

A feasibility study for developing an improved tool and improved models for performing event assessments is described. The study indicates that the IRRAS code should become the base tool for performing event assessments, but that modifications would be needed to make it more suitable for routine use. Alternative system modeling approaches are explored and an approach is recommended that is based on improved train-level models. These models are demonstrated for Grand Gulf and Sequoyah. The insights that can be gained from importance measures are also demonstrated. The feasibility of using Individual Plant Examination (IPE) submittals as the basis for train-level models for precursor studies was also examined. The level of reported detail was found to vary widely, but in general, the submittals did not provide sufficient information to fully define the model. The feasibility of developing an industry risk profile from precursor results and of trending precursor results for individual plants were considered. The data sparsity would need to be considered when using the results from these types of evaluations, and because of the extremely sparse data for individual plants we found that trending evaluations for groups of plants would be more meaningful than trending evaluations for individual plants.

The discrete Fourier transform (DFT) is used frequently used in the computation of the signal-to-noise ratio (SNR) and harmonic distortion. To estimate the SNR or harmonic distortion, a sine wave is applied to the digitizing system under test. When the data record contains an integer number of cycles of the sine wave, energy from the sine wave and its harmonics does not leak into adjacent DFT frequency bins. Each harmonic occupies one an only one DFT frequency bin. To find the root-mean-square (RMS) value of a harmonic from its DFT, one computes the magnitude of the DFT value at the single frequency of the harmonic. When the DFTs of the fundamental and its harmonics are single lines, the SNR and harmonic distortion are easy to compute. When the data record contains a non-integer number of cycles of the sine wave, energy leaks from the sine wave and its harmonics to adjacent frequencies. The literature contains several approaches to problem of determining which DFT components correspond to a sine wave harmonic. This paper describes how to estimate the RMS value of a sine wave from its DFT with special attention to the selection of the DFT window. The set of DFT frequencies which comprise a harmonic depends on the DFT window, the length of the DFT, and the number of bits of the digitizer. Criteria are developed for choosing the DFT frequencies that correspond to a sine wave. These criteria lead to better choices of DFT windows for SNR and harmonic distortion calculations.

Sandia has developed an advanced operational control system approach, caged Graphical Programming, to design and operate robotic waste cleanup and other hazardous duty robotic systems. The Graphical Programming approach produces robot systems that are faster to develop and use, safer in operation, and cheaper overall than altemative teleoperation or autonomous robot control systems. The Graphical Programming approach uses 3-D visualization and simulation software with intuitive operator interfaces for the programming and control of complex robotic systems. Graphical Programming Supervisor software modules allow an operator to command and simulate complex tasks in a graphic preview mode and, when acceptable, command the actual robots and monitor their motions with the graphic system. Graphical Progranuning Supervisors maintain registration with the real world and allow the robot to perform tasks that cannot be accurately represented with models alone by using a combination of model and sensor-based control. This paper describes the Graphical Programming approach, several example control systems that use Graphical Programming, and key features necessary for implementing successful Graphical Programming systems.

Hazardous operations which in the past have been completed by technicians are under increased scrutiny due to high costs and low productivity associated with providing protective clothing and environments. As a result, remote systems are needed to accomplish many hazardous materials handling tasks such as the clean up of waste sites in which the exposure of personnel to radiation, chemical, explosive, and other hazardous constituents is unacceptable. Traditional remote manual operations have proven to have very low productivity when compared with unencumbered humans. Computer models augmented by sensing and structured, modular computing environments are proving to be effective in automating many unstructured hazardous tasks.

Testing and analysis of shock wave characteristics such as produced by detonators and ground shock propagation frequently require a method of measuring velocity and displacement of the surface of interest. One method of measurement is doppler interferometry. The VISAR (Velocity Interferometer System for Any Reflector) uses doppler interferometry and has pined wide acceptance as the preferred tool for shock measurement. An important asset of VISAR is that it measures velocity and displacement non intrusively. The conventional VISAR is not well suited for portability because of its sensitive components, large power and cooling requirements, and hazardous laser beam. A new VISAR using the latest technology in solid state lasers and detectors has been developed and tested. To further enhance this system's versatility, the unit is fiber optic coupled which allows remote testing, permitting the VISAR to be placed over a kilometer away from the target being measured. Because the laser light is contained in the fiber optic, operation of the system around personnel is far less hazardous. A software package for data reduction has also been developed for use with a personal computer. These new advances have produced a very versatile system with full portability which can be totally powered by batteries or a small generator. This paper describes the solid state VISAR and its peripheral components, fiber optic coupling methods and the fiber optic coupled sensors used for sending and receiving laser radiation.

Thick film Au metallizations are commonly used as conductors in hybrid microelectronics that operate at high frequencies. Discrete components are attached to these conductors with 5OPb/5OIn solder. Intermetallic compounds form and grow in the solid state with time; AuIn[sub 2] is the primary compound formed in the Au-5OPb/50In system. A hybrid failed after being artificially aged to consume all of the Au and then subjected to normal thermal cycle and vibration testing. Postmortem analysis revealed that three capacitors had debonded. The failed parts were studied to determine the failure mechanism(s) and define a parametric study to characterize the mechanisms that bond the Au thick film to the ceramic substrate.

This is a peer review report of the Environmental and Molecule Sciences Laboratory. Although the Pretreatment, Treatment, and Waste Forms comments are focused specifically on pretreatment treatment, and waste forms, the group recognizes that the life cycle designation is a somewhat arbitrary breakdown of a series of activities that form a continuum in the environmental restoration and waste management program. Consequently, some of the comments made here are relevant in a broader context or even for EM as a whole. particular, characterization activities pervade all life cycles in environmental restoration/waste management. As we use the term in this section, characterization'' refers to the process monitoring and control that are required during pretreatment and treatment. Most of the technology presentations during the review identified links to support this area and delineated to varying degrees the specific ties to the Hanford Site cleanup requirements. Overall, the EMSL especially its planned facilities, are most impressive, and DOE and PNL are urged to proceed with all due haste toward its completion. Specific issues or concerns identified during the review are included in the following section.

Scientific visualization is playing an increasingly important role in the analysis and interpretation of massively parallel CFD simulations due to the enormous volume of data that can be generated on these machines. In this paper we will describe the development of a visualization technique based on a parallel analogue to the Marching Cubes algorithm. The algorithm has been developed for Multiple-Instruction, Multiple-Data (MIMD) massively parallel computers and is designed to take advantage of the heterogeneous programming capabilities of the MIMD architecture. We examine several different configurations and conclude that for producing animations the best one, in terms of both frame generation time and disk usage, is to run the two applications heterogeneously and send the resulting geometry description directly to a workstation for rendering, thereby totally eliminating the use of files from the animation process.

Sandia National Laboratories is prototyping a service for providing a distributed visualization capability between its Albuquerque, New Mexico and Livermore, California sites. The service will allow TCP/EP LAN users to process computationally intensive codes on the Cray Y-MP 8/864 and use the Application Visualization System, (AVS) running on a visualization server to display the results to desktops in Livermore (or Albuquerque). The long-haul environment presents several technical challenges such as high delays (up to 42 milliseconds), potential error rates, and security concerns which can affect the quality of the services. The network design requires low latency switch gear and high speed LAN connections (FDDI) to make the visualization/computational services useful to the customer. This paper will describe tie network design used and will report performance characteristics of the applications utilizing this service.

AC impedance and x-ray diffraction measurements versus temperature and pressure ternary intercalation compounds are reported. Results support our previously established empirical correlation between superconducting onset temperature and 300K fcc lattice constant. Compounds which do not follow this correlation either phase separate or are otherwise unstable at low T and/or high P.

We have demonstrated removal of H from a H-passivated Si(100) surface by low energy ([approximately]50 eV) He ion bombardment. The extent of the removal of H from the surface can be controlled by varying the duration of He bombardment and plasma parameters. This, in turn, means that the growth rate by this method can also be controlled. Si[sub 2]H[sub 6] was shown to adsorb in a self-limiting manner on the Si(100) surface.

The earth`s ionosphere consists of an ionized plasma which will interact with any electromagnetic wave propagating through it. The interaction is particularly strong at vhf and uhf frequencies but decreases for higher microwave frequencies. These interaction effects and their relationship to the operation of a wide-bandwidth, synthetic-aperture, space-based radar are examined. Emphasis is placed on the dispersion effects and the polarimetric effects. Results show that high-resolution (wide-bandwidth) and high-quality coherent polarimetrics will be very difficult to achieve below 1 GHz.

SAFSIM (System Analysis Flow SIMulator) is a FORTRAN computer program that provides engineering simulations of user-specified flow networks at the system level. It includes fluid mechanics, heat transfer, and reactor dynamics capabilities. SAFSIM provides sufficient versatility to allow the simulation of almost any flow system, from a backyard sprinkler system to a clustered nuclear reactor propulsion system. In addition to versatility, speed and robustness are primary goals of SAFSIM development. The current capabilities of SAFSIM are summarized and some sample applications are presented. It is applied here to a nuclear thermal propulsion system and nuclear rocket engine test facility.

Photovoltaic (PV) systems offer a cost-effective solution to provide electrical power for a wide variety of applications, with battery performance playing a major role in their success. This paper presents some of the results of an industry meeting regarding battery specifications and ratings that photovoltaic system designers require, but do not typically have available to them. Communications between the PV industry and the battery industry regarding appropriate specifications have been uncoordinated and poor in the past. This paper also discusses the effort under way involving the PV industry and battery manufacturers, and provides a working draft of specifications to develop and outline the information sorely needed on batteries. The development of this information is referred to as ``Application Notes for Batteries in Photovoltaic Systems.`` The content of these ``notes`` has been compiled from various sources, including the input from the results of a survey on battery use in the photovoltaic industry. Only lead-acid batteries are discussed

In one design of molten-salt central receivers, the molten salt flows in a serpentine path, down one panel of tubes then up the next and down again continuing in this fashion through the receiver. There have been concerns about this design because in the down flow sections, the heat flux incident on the tubes can cause flow instability since the flow is in direct opposition to the buoyant forces. In extreme cases the buoyant forces can cause flow stagnation or reversal. An analysis of flow stability within individual tubes and down flow sections of receiver panels is presented. When the partial derivative of the pressure drop with respect to mass flow rate is negative ({partial_derivative}{Delta}P/{partial_derivative}{sup {lg_bullet}} < 0), the flow is unstable and could cause serious damage to the receiver. Stability maps are developed that show safe operating regimes where inertial forces dominate over buoyant forces. The data is then normalized using the Grashof and Reynolds numbers.

United States Department of Energy has established its first Advanced Research Objective in the Solids Transport Program. The scientific, engineering, and management goals are discussed in some detail. Scientific progress to date is summarized. Comments are made on the technical direction of further Advanced Research Objectives.

We have developed a Li/SOCl{sub 2} ``D`` cell for applications requiring 10 to 15 years life at very low drain rates, typically less than 150 {mu}A. Maximizing cell safety and reliability, while delivering very good energy density, have been the goals of our study. We have achieved these goals by designing the cell to be application specific. The low-rate cell has been optimized to deliver up to 16 Ah at drain rates of less than 70 mA. By virtue of its low surface area, 145 cm{sub 2}, the cell has demonstrated excellent safety behavior. Safety testing has been performed on individual cells as well as on two-cell and four-cell batteries. Single cells did not vent when short-circuited. We were able to produce benign venting in a two cell string, but only when the string was partially discharged before shorting. The vent mechanism is a 300 psi rupture pressure burst disc manufactured by BS&B Safety Systems. We define benign venting as full opening of the 3/8 in. dia vent hole without deformation of the case. Material is expelled from the cell without flame, and the cell stack remains largely intact. We have not produced venting of the Sandia-designed low rate cell under any other abuse test conditions. The vent functions as an ultimate safety mechanism in the case of severe abuse, but resistance to venting under normal use and mild abuse conditions is key to the achievement of high reliability.

A new class of ion-exchange materials that can selectively separate low parts per million level concentrations of Cs{sup +} from 3--6 molar concentrations of Na{sup +} over a wide pH range has recently been developed as a result of a collaborative effort between Sandia National Laboratories and Texas A&M University. The materials, called crystalline silicotitanates, show potential for application in the treatment of aqueous nuclear waste solutions.

In order to develop a procedure for measuring cation diffusion coefficients below 1000{degrees}C, we have examined the suitability of several diffusion couple configurations involving single crystals of garnet. Initial experiments using an enriched {sup 25}MgCl{sup 2} proved ineffective in providing a uniform and coherent surface for analysis by ion microprobe. A technique was developed using thin film deposition. Thin films ({approximately} 1000 {Angstrom}) of MgO{sub x} (x < 1) can be applied to polished mineral surfaces by evaporating MgO powder under high vacuum with a thermal-resistance strip heater. Thermal resistance evaporation is efficient. Samples of single crystal grossular and pyrope garnets with thin films of MgO, as created by these techniques, were annealed for various times at 800, 900, and 1000{degrees}C, at several log fO{sub 2} values, and 1 atm. Optical, SEM, and ion microprobe analyses reveal no disruption of the interface. Profiles of elemental counts vs depth exhibit expected patterns going through the thin film into the garnet substrate. Our experimental matrix of garnet diffusion runs includes over 60 cut and polished crystals of pyrope composition that are being run at various oxygen fugacity conditions from 600 to 1000{degrees}C.

The Los Alamos National Laboratory (LANL) Mechanical Engineering and Electronics Division, in partnership with Sandia National Laboratories and Programmed Composites, is advancing the development of thin-walled, high modulus short-fiber compression-molded composite materials fabrication. In this paper, we investigate component uniformity, structural integrity, thermal conductivity, and radiation resistance; discuss the scanning-electron microscopic inspection of the graphite fiber distribution and orientation, and describe the process used in selecting the reinforcement fiber length and modulus and for choosing the hydrophobic, cyanate-ester resin.

During the last two decades there has been considerable interest in developing alternatives to conventional chemical propulsion for space missions. Laser propulsion has been identified as a serious contender for the task of inexpensively delivering small payloads to low-earth orbit. Recent advances in the development of lasers powered directly by nuclear reaction products offer the potential for new propulsion methods, namely, reactor-laser propulsion. Such systems would allow ``nuclear propulsion`` without placing nuclear systems in space.

Alternate organometallic Sb sources are being investigated to improve the characteristics of InSb grown by MOCVD. InSb grown using trimethylindium (TMIn) and trimethylantimony (TMSb) or triethylantimony (TESb) yielded similar quality materials under similar growth conditions. InSb grown using triethylindium (TEIn) and TESB under similar growth conditions yielded very poor quality n-type material. Three new organometallic Sb sources, triisopropyl-antimony (TIPSb), tris(dimethylamino)antimony (TDMASb), and tertiarybutyldimethylantimony (TBDMSb) are being investigated. Growth of InSb using TIPSb, TDMASb, or TBDMSb and TMIn was investigated over 350 to 475{degrees}C. InSb grown from TDMASb had similar properties to InSb grown from TMIn and TMSb when using a similar temperature and V/III ratio range. Growth rates of InSb using TMIn and either TIPSb or TBDMSb at temperatures {le} 425{degrees}C were proportional to both TMIn flow rate and temperature. Surface morphology of InSb grown using either TIPSb or TBDMSb was rough for growth temperatures {le} 425{degrees}C; this may be due to complex decomposition and methyl groups on surface. The InSb with the highest mobility was grown at 400{degrees}C and a V/III ratio of 3 using TIPSb. It was n-type with a carrier concentration of 2.5 {times} 10{sup 15} cm{sup {minus}3} and a mobility of 78,160 cm{sup 2}/Vs at 77 K. Both n- and p-type InSb were grown using TBDMSb with mobilities up to 67,530 and 7773 cm{sup 2}/Vs, respectively at 77 K. Mobility for InSb using either TIPSb or TBDMSb was optimized by going to lower temperatures, pressures, V/III ratios; however, surface morphology improved with higher temperature, pressure, V/III ratio. High mobility InSb with smooth surfaces at T {le} 425{degrees}C was not obtained with TIPSb or TBDMSb and TMIn.

We present the use of an STM to make quantitative observations of time-dependent mass flow associated with the decay of two-dimensional clusters on the Au(lll) surface. When formed and observed in air, layered islands with well-defined edges located on larger terraces are generally found to decay in such a way that their areas decrease linearly in time over periods ranging from minutes to several hours depending on the island size. This is in contrast to the behavior of similar features formed and observed under ultra high vacuum conditions, which do not appear to decay over experimental periods of several days. The linear decay is consistent with models that have been used previously to describe growth of 2-dimensional clusters on surfaces. We discuss possible decay mechanisms`, and the role that adsorbates may play in influencing the decay.

In support of the UST, WeDID, VOC/Non-Arid, and VOC/Arid, and VOC/Arid Integrated Demonstrations, organic contaminants and nitrates in Hanford Underground Storage Tank (UST) wastes, polymeric organics in weapon components, and chlorocarbon soil contaminants have been destroyed by exposure to high-temperature steam during bench tests with a quartz reactor and full-scale tests that used the Synthetica Detoxifier, a commercial one-ton-per-day steam reforming waste destruction system. Reactivation of Granular Activated Carbon (GAC) in the Detoxifier and Thermal Gravimetric Analyses (TGA) of the decomposition of sodium nitrate have also been performed.

We have successfully grown ZnMnTe alloys by molecular beam epitaxy using GaAs as a substrate. Bulk MnTe has the wurtzite crystal structure but the structural phase of the material was confirmed to be zinc-blende by standard {theta}-2{theta} x-ray diffraction techniques. The composition was also determined using x-ray diffraction techniques. Manganese concentration was also estimated from magnetization measurements taken as a function of temperature. Magnetoluminescence studies were performed at 1.4K on the acceptor-bound exciton in the semimagnetic semiconductor ZnMnTe alloys. As expected, the photoluminescence peak energy decreased with increasing magnetic field.

At some landfills, hazardous wastes were placed into disposal pits with other waste oils. Volatile organic wastes, such as cleaning solvents, when combined with oil are much more difficult to remove from the soils because the oil makes the volatile organic chemical evaporate much slower. The typical vacuum extraction remediation method could become a lengthy campaign. Since all chemicals evaporate faster when they are heated, if the contaminated soil could be heated, the chemicals would be easier to remove from the soil. By using heating techniques developed by the Oil and Gas Industry to enhance the removal of oil and gas resources from the soil, the problem of removing contamination from the soils could be solved. The Thermal Enhanced Vapor Extraction System (TEVES) demonstration will combine vacuum vapor extraction technology with powerline frequency soil heating and radiofrequency soil heating to accelerate the soil decontamination process. The premise that soil heating technology can actually reduce the costs of soil decontamination is complicated by the high capital costs of the soil heating equipment and the cost of electrode installation. By performing this field demonstration, Sandia will be able to collect the information needed to see if this new technology will improve the decontamination of soils.

Sandia National Laboratories is a large multiprogram Research and Development laboratory which is operated by a contractor for the US Department of Energy. In the Laboratories, lasers are both the subject of research and the tools that are used in other research, development, and testing activities. Since 1979, laser safety training has been the primary focus of the Laboratories` laser safety program. Approximately 1 100 personnel have been trained in formal courses during that time period. The formal course, presented on site by a contractor, consists of two full days of instruction. The course contents include the following topics: Laser technology and safety overview; Federal and ANSI laser standards summaries; Biological effects of laser radiation; Classification of lasers; Laser hazard analysis; Review of ANSI Z136.1 control measures; Laser eye protection. Recent emphasis on regulatory requirements, conduct of operations, and quality management has revealed a need to change the laser safety training curriculum. A new course for users of low power lasers (Class 2 and 3a) is being developed. A refresher course, a management awareness (self-study) course, and major changes in the current course are planned.

Short communication.

A solar photocatalytic process has been under development at both Sandia National Laboratories and the National Renewable Energy Laboratory (formerly the Solar Energy Research Institute). This process uses solar ultraviolet light to activate a titanium dioxide catalyst which oxidizes organic contaminants in water. In the summer of 1991, a solar photocatalytic detoxification of water system was installed and tested at a California Superfund Site located at Lawrence Livermore National Laboratory. The site was designated a Superfund Site because of widespread groundwater contamination which resulted from the release of chlorinated solvents, principally trichloroethylene, when the site was a Naval Air Station in the early 1940s. The objectives of these experiments were to measure the effects of process variables and the process efficiency in an actual remediation setting, to collect experimental data and operating experience in photocatalytic oxidation of organic contaminants, to develop accurate models of the system operation and to develop control strategies.

The Materials Interface Interaction Tests (MIIT) program involves the comparative performance-evaluation testing of multiple US and foreign nuclear waste glasses (nonradioactive), potential canister and overpack metals, brine, and geologic materials in the rock salt repository environment at the Waste Isolation Pilot Plant (WIPP) facility. We emplaced about 2000 materials specimens onto fiftn, separate test assemblies and exposed them to a heated, salt-brine environment at the WIPP for multi-year periods. We successfully terminated the in situ conduct of the MIIT in July 1991, after five years of testing, and retrieved all samples for posttest laboratory analyses. These 5-year glass and metal samples, along with samples previously retrieved after 0.5, 1, and 2 years, are being analyzed in multiple international laboratories, in a cooperative testing effort. Individual test participants will present available laboratory results, and interpretations, on MIIT specimens in this workshop. Our focus in this paper is to summarize technical details and repository-relevant observations on the in situ conduct, sampling, and termination operations of the MIIT experimental program. Such information should be useful for the interpretation of the laboratory-based analyses. This information also will be relevant and instructive for other organizations contemplating, planning, or conducting additional materials-related, in situ tests.

A comparison between numerical calculations with use of commercial thermal analysis software packages and experimental data simulating a horizontally oriented spent fuel rod array was performed. Twelve cases were analyzed using air and helium for the fill gas, with three different heat dissipation levels. The numerically predicted temperatures are higher than the experimental data for all levels of heat dissipation with air as the fill gas. The temperature differences are 4{degree}C and 23{degree}C for the low heat dissipation and high heat dissipation, respectively. The temperature predictions using helium as a fill gas are lower than the experimental data for the low and medium heat dissipation levels. The temperature predictions are 1{degree}C and 6{degree}C lower than the experimental data for the low and medium heat dissipation, respectively. For the high heat dissipation level, the temperature predictions are 16{degree}C higher than the experimental data. Differences between the predicted and experimental temperatures can be attributed to several factors. These factors include experimental uncertainty in the temperature and heat dissipation measurements, actual convection effects not included in the model, and axial heat flow in the experimental data. This work demonstrates that horizontally oriented spent fuel rod surface temperature predictions can be made using existing commercial software packages. This work also shows that end effects, such as axial heat transfer through the spent fuel rods, will be increasingly important as the amount of dissipated heat increases.

Magnetic force microscopy (MFM) has been applied to image currents in internal IC conductors. We present a model for the MFM imaging of IC currents, describe MFM signal generation, and demonstrate the ability to analyze current direction and magnitude with a sensitivity of {approximately} 1 mA dc and {approximately} 1 {mu}A ac. Our experimental results are a significant improvement on the 100 mA ac resolution previously reported using an electron beam to detect IC currents [1].

The Waste Isolation Pilot Plant: (WIPP) in southeastern New Mexico is being developed by the US Department of Energy as a disposal facility for transuranic waste. In support of this project, Sandia National Laboratories is conducting an ongoing performance assessment (PA) for the WIPP. The ordered triple- representation for risk proposed by Kaplan and Garrick is used to provide a clear conceptual structure for this PA. This presentation describes how the preceding representation provides a basis in the WIPP PA for (1) the definition of scenarios and the calculation of scenario probabilities and consequences, (2) the separation of subjective and stochastic uncertainties, (3) the construction of the complementary cumulative distribution functions required in comparisons with the US Environmental Protection Agency`s standard for the geologic disposal of radioactive waste (i.e., 40 CFR Part 191, Subpart B), and (4) the performance of uncertainty and sensitivity studies. Results obtained in a preliminary PA for the WIPP completed in December of 1991 are used for illustration.

Short communication.

As applications for hybrid circuits and multichip modules create demand for higher density circuits and higher power components, new substrate materials are required to deal with the heat generated on the circuit. Sandia National Laboratories is developing diamond substrate technology to meet the requirements of high thermal conductivity. Thin film processes were developed and characterized to delineate conductor-resistor networks on free standing diamond substrates having fine line gold conductors and low and high sheet resistivity resistors. Thin film hybrid circuit technology was developed on CVD-processed, polycrystalline diamond substrates having as-deposited surface finishes as well as those with polished surfaces. Conductors were defined by pattern plating gold and resistors were processed from sputtered tantalum nitride films which were deposited to sheet resistivities of 5 and/or 100 ohms per square. Resistor films on diamond substrates were evaluated for Temperature Coefficient of Resistance (TCR), stability with time and temperature, and trimmability using YAG laser processing. Plated gold conductors were patterned on diamond to feature sizes of 25 microns and successfully tested for adhesion and bondability. Advanced YAG laser trimming techniques were developed to allow resistor trims on both low and high value resistors to within 1% of desip value while maintaining required resistor stability, new trim techniques were needed to offset the carbonization of diamond in the laser trim area. Reliability studies were carried out on the diamond thin film networks which showed them to compare favorably with the same thin film technology on alumina substrates.

Photocreation mechanisms and properties of nitrogen dangling bonds in amorphous hydrogenated silicon nitride (a-SiN{sub x}:H) thin films are investigated. We find that the creation kinetics are strongly dependent on the post-deposition anneal; this thermal process can be described by a simple exponential function which yields an activation energy of 0.8 eV. The compositional dependence of the nitrogen dangling bond center suggests that its energy level lies close to the valence band edge, in agreement with theoretical calculations. This energy level position can explain why a-SiN{sub x}:H films often become conducting following a high post-deposition anneal.

Path planning needs to be fast to facilitate real-time robot programming. Unfortunately, current planning techniques are still too slow to be effective, as they often require several minutes, if not hours of computation. To overcome this difficulty, we present an adaptive algorithm that uses previous experience to speed up future performance. It is a learning algorithm suitable for incrementally-changing environments such as those encountered in manufacturing of evolving products and waste-site remediation. The algorithm extends our previous work for stationary environments in two directions: For minor environmental change, an object-attached experience abstraction scheme is introduced to increase the flexibility of the learned experience; for major environmental change, an on-demand experience repair scheme is also introduced to retain those experiences that remain valid and useful. In addition to presenting this algorithm, we identify three other variants with different repair strategies. To analyze the respective performance of these algorithms, we develop an analytic model that quantifies and relates training effort, experience value and utility, and environmental change through intuitive terms of energy and work. It is a general and simple model that should be very useful in characterizing other types of learning processes as well. Using this model, we formalize the concept of incremental change, and prove the optimality of our proposedalgorithm under such change. Empirically, we also characterize the performance curve of each variant, confirm our theoretical optimality results, and demonstrate the practicality of our algorithm.

A method of solving the two-phase fluid flow equations using a genetic algorithm on a NCUBE multiprocessor computer is presented. The topics discussed are the two-phase flow equations, the genetic representation of the unknowns, the fitness function, the genetic operators, and the implementation of the algorithm on the NCUBE computer. The efficiency of the implementation is investigated using a pipe blowdown problem. Effects of varying the genetic parameters and the number of processors are presented.

A method is described for parallelizing molecular dynamics (MD) simulations by block-decomposing the matrix of bonded and non-bonded force computations. It is particularly useful for organic simulations (polymers, proteins) because unlike spatial-decomposition methods, it requires no geometric information about the simulation domain. Because its communication cost scales as N/{radical}P. rather than N as in the all-to-all broadcast or ring-exchange techniques commonly used in this type of MD simulation, larger numbers of processors can be used effectively, yielding greater parallel speed-ups.

Two major initiatives are underway in the US that are creating a significant financial impact on both the US taxpayer and on users of electric power. First, the US Department of Energy (DOE) has been tasked with cleaning-up the defense complex. This task is managed under the direction of the Office of Environmental Restoration and Waste Management (EM) of the DOE. The waste that EM must address includes radioactive, hazardous, and mixed that consists of both radioactive and hazardous constituents. Second, the DOE is required by the Nuclear Waste Policy Act (NWPA) to take title to commercial nuclear spent fuel assemblies starting in 1998. The DOE Office of Civilian Radioactive Waste Management (OCRWM) was established to carry out this charter. Since a final repository is not scheduled for opening until 2010 at the earliest, the DOE is planning on providing a Monitored Retrievable Storage (MRS) facility for centralized storage to bridge the time gap between 1998 and 2010. The NWPA requires that nuclear utilities pay a fee into a specific fund that Congress uses to pay the DOE for the development of the MRS, the transportation system, and the repository. This fund, along with the EM budget, constitutes a multi-billion dollar effort to manage DOE nuclear waste and to store and dispose of commercial spent nuclear fuel. These two seemingly unrelated problems have aspects of commonality that can be considered for the benefit of both programs, the US taxpayer, and the utility rate payer. Both programs are the responsibility of the DOE, and both will require engineered packages for storage, transportation, and disposal of the EM waste and commercial spent fuel. Rather than using specialized systems for each step (storage, transport, and disposal), a concept for a Universal Container System has been developed that could potentially simplify the overall waste management system, reduce expensive handling operations, and reduce total system cost.

Inadvertent alloying of Cu braze metal can compromise metal/ceramic seals. Electron microprobe analyses have quantified alloying of Cu brazes in metal/ceramic feedthroughs. Pin material and processing parameters above 1084C both affect alloying levels. Using either Kovar or Ni-plated 316L stainless steel pins limits alloying compared to Palco pins. Minimizing the time during which the braze is molten also avoids excessive alloying. The original thickness of the Ni plating on the Mo-Mn metallization of the ceramic also influences the alloying content of these brazes. Metal/ceramic brazes made with long brazing cycles, Mo-Mn metallization, and Kovar components grow a layer of Mo{sub 6}(Fe{sub 3.5}CO{sub 3.5}){sub 7} on the metallization. Layer thicknesses observed do not appear to compromise joint integrity. Ni additions of approximately 10 and 20 wt.% to Cu apparently increases the stress required for stress relaxation during cooldown. to maintain creep rates required for stress relaxation during cooldown. Relative to unalloyed Cu, this strengthening effect tends to increase as temperature is decreased.

In this paper we investigate the applicability of the feature extraction mechanisms found in the neurophysiology of mammals to the problem of object recognition in synthetic aperture radar imagery. Our approach is to present multiple views of objects to be recognized to a two-stage self-organizing neural network architecture. The first stage, a two-layer Neocognitron, performs feature extraction in each layer The resulting feature vectors are presented to the second stage, an ART-2A classifier self-organizing neural network which clusters the features into multiple object categories. The feature extraction operators resulting from the self-organization process are compared to the feature extraction mechanisms found in the neurophysiology of vision. In a previous paper, the Neocognitron was trained on raw SAR imagery. The architecture was able to recognize a simulated vehicle at arbitrary azimuthal orientations at a single depression angle while rejecting clutter as well as other vehicles. Feature extraction on raw imagery yielded features that were robust but very difficult to interpret. In this paper we report the results of some new experiments in which the self-organization process is applied separately to shadow and bright returns from objects to be recognized. Feature extraction on shadow returns yield oriented contrast edge operators suggestive of bipartite simple cells observed in the striate cortex of mammals. Feature extraction on the specularity patterns in bright returns yield a collection of operators resembling a twodimensional Haar basis set. We compare the performance of the earlier two-stage neural network trained on raw imagery with a modified network using the new feature set.

The Mixed Waste Landfill Integrated Demonstration (MWLID) is testing noninvasive site characterization methods at several locations, including the Chemical Waste Landfill (CWL) at Sandia National Laboratories. The CWL comprises shallow, unlined pits that were used for the disposal of acids, oils, solvents, and inorganic compounds from 1962 until the CWL was closed in 1985. The soils of the landfills are alluvial, predominantly sand, gravels and cobbles with small quantities of silts and clays. The focus of this study is an unlined chromic acid pit (UCAP). The UCAP pit is rectangular (approximately 4 {times} 10 m), which reportedly received unknown volumes of chromium in the form of chromic acid (liquid) and other hazardous materials. At this location, we have demonstrated a continuous waveform (CW) system for site characterization. During this year, we will also utilize a crossborehole pulsed radar system. Both methods are sensitive to variations in either electrical conductivity or dielectric constant in the soils or host rock at a waste site. These earth properties are some of the most responsive geophysical indicators of metallic, acidic and water-based subsurface contaminants.

Using Saturn as a driver, we are pursuing both photoresonantly pumped and photoionization/recombination lasers. Our lasing targets are gas cells with thin windows that are pumped by a z pinch 2 cm away radiating 10 TW. In both schemes the lasant and gas fill is neon. To increase our chances of measuring the resonantly photopumped lasing transition we have introduced potassium into a sodium z pinch and have eliminated oxygen from the gas cell windows. We have measured the spatial dependence of ionization balance across the gas cell, and this measurement is consistent with propagation of a shock front across the gas cell target. We have measured blue-shifted satellites to several Li-like neon transitions that may indicate return-current driven jetting a high 1.5e8 cm/sec velocity. Using a gold z-pinch we have shown that key radiation is necessary to excite the He-like lines of neon. An attempt at a single shot gain measurement also indicates that radiation is not the only source of gas cell heating.

This paper presents a full-field dye concentration measurement technique that extends our experimental capabilities to the measurement of transient dye concentration fields within steady state flow fields under unsaturated or saturated conditions. Simple light absorption theory provides a basis for translating images into high resolution dye concentration fields. A series of dye pulse experiments that demonstrate the combined use of the full-field saturation and dye concentration techniques was conducted at four different degrees of saturation. Each of these experimental sequences was evaluated with respect to mass balance, the results being within 5% of the known dye mass input. An image windowing technique allowed us to see increased dispersion due to decreasing moisture content, tailing of concentration at the rear of the dye pulse and slight velocity changes of the dispersive front due to changes in moisture content. The exceptional resolution of dye concentration in space and time provided by this laboratory technique allows systematic experimentation for examining basic processes affecting solute transport within saturated/unsaturated porous media. Future challenges for this work will be to use these techniques to analyze more complex systems involving heterogeneities, scaling laws, and detailed investigations of the relationship between transverse and longitudinal dispersion in unsaturated media.

The Beam Characterization System is being employed at the Sandia`s National Solar Thermal Test Facility to characterize the optical performance of heliostats, point-focus solar collectors, and their optical sub-elements as part of the on-going task to develop solar thermal technologies. With this measurement system, images of concentrated solar flux are acquired using digital imaging and processed to obtain such measures of the collector`s optical performance as beam power, flux distribution, and beam diameter. Key system elements are a diffusely reflective target for imaging collector beams, meteorological instrumentation including a flux gauge to measure flux at one point in the beam, and a calibration technique to establish a pixel-intensity-to-flux-density conversion factor for the image. The system is employed in a variety of collector tests such as beam quality, tracking error, and wind effects. The paper describes the Beam Characterization System and its components and presents, for illustration, sample test results. An analysis of the Beam Characterization System`s sources of measurement error is presented. Lastly, measurement techniques that employ the BCS to align heliostats and to measure or estimate collector surface slope errors are described.

We have measured the laser emission spectra of several vertical cavity surface emitting lasers following pulsed laser excitation, with a time resolution of < 1 ps. Correlations between the observed pulse widths and cavity lifetimes were observed.

A series of constant strain rate, unconfined compression experiments was performed on saturated welded tuff specimens collected from Busted Butte near Yucca Mountain, Nevada. Twenty specimens were loaded to failure at strain rates ranging from 10{sup {minus}9}s{sup {minus}1} to 10{sup {minus}3}s{sup {minus}1}, under ambient pressure and temperature conditions. The strength of the specimens showed a continuous decrease with decreasing strain rate between 10{sup {minus}9} s{sup {minus}1} and 10{sup {minus}5} s{sup {minus}1}. At the highest strain rate, 10{sup {minus}3} s{sup {minus}1}, strengths were less than those observed at 10{sup {minus}5} s{sup {minus}1}, likely due to hydrofracturing within the specimen at rapid loading rates. Reduction in strength, corresponding to the decrease in strain rate, is explained in terms of stress corrosion cracking. A detailed examination of six specimens tested at a strain rate of 10{sup {minus}9} s{sup {minus}1}, using acoustic wave velocities and CT scans, shows a correlation between the nature of the microstructure of the specimens and the observed strengths and elastic moduli.

Pore scale invasion percolation theory is modified for imbibition of.wetting fluids into fractures. The effects of gravity, local aperture field geometry, and local in-plane air/water interfacial curvatureare included in the calculation of aperture filling potential which controls wetted structure growth within the fracture. The inclusion of gravity yields fingers oriented in the direction of the gravitational gradient. These fingers widen and tend to meander and branch more as the gravitational gradient decreases. In-plane interfacial curvature also greatly affects the wetted structure in both horizontal and nonhorizontal fractures causing the formation of macroscopic wetting fronts. The modified percolation model is used to simulate imbibition into an analogue rough-walled fracture where both fingering and horizontal imbibition experiments were previously conducted. Comparison of numerical and experimental results showed reasonably good agreement. This process oriented physical and numerical modeling is-a necessary step toward including gravity-driven fingering in models of flow and transport through unsaturated, fractured rock.