Publications

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Advances in technology have resulted in the need for electronic devices to continue functioning even when placed in harsh environments. Widespread use of cell phones, laptop computers, and other personal electronic devices, the increased number of electronic controls in home appliances, and the ever more extensive utilization of digital technology in the automotive industry have led to a growing demand for printed circuit boards (PCBs) that can perform under difficult conditions. Conformal coatings provide a protective barrier that enables the PCBs to function in these demanding environments. This growth in demand comes despite the cost and numerous difficulties associated with the application of these coatings. Many conformal coatings manufacturers are investing in the development of new technologies that minimize these difficulties. Others are involved in developing disruptive technologies that will serve as alternatives to traditional conformal coatings processes.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Given pre-existing Groundwater Modeling System (GMS) models of the Horonobe Underground Research Laboratory (URL) at both the regional and site scales, this work performs an example uncertainty analysis for performance assessment (PA) applications. After a general overview of uncertainty and sensitivity analysis techniques, the existing GMS site-scale model is converted to a PA model of the steady-state conditions expected after URL closure. This is done to examine the impact of uncertainty in site-specific data in conjunction with conceptual model uncertainty regarding the location of the Oomagari Fault. A heterogeneous stochastic model is developed and corresponding flow fields and particle tracks are calculated. In addition, a quantitative analysis of the ratio of dispersive to advective forces, the F-ratio, is performed for stochastic realizations of each conceptual model. Finally, a one-dimensional transport abstraction is modeled based on the particle path lengths and the materials through which each particle passes to yield breakthrough curves at the model boundary. All analyses indicate that accurate characterization of the Oomagari Fault with respect to both location and hydraulic conductivity is critical to PA calculations. This work defines and outlines typical uncertainty and sensitivity analysis procedures and demonstrates them with example PA calculations relevant to the Horonobe URL. Acknowledgement: This project was funded by Japan Nuclear Cycle Development Institute (JNC). This work was conducted jointly between Sandia National Laboratories (SNL) and JNC under a joint JNC/U.S. Department of Energy (DOE) work agreement. Performance assessment calculations were conducted and analyzed at SNL based on a preliminary model by Kashima, Quintessa, and JNC and include significant input from JNC to make sure the results are relevant for the Japanese nuclear waste program.

Abstract not provided.

Solution stamping nanolithography (SSNL) was used to print patterns of metallic copper and high-temperature-superconducting YBa{sub 2}Cu{sub 3}O{sub 7}. SSNL combines soft lithography and chemical-solution deposition to achieve direct printing of inorganic materials. The size of the printed patterns is determined by both the stamp feature size and the wetting properties of the solution.

Abstract not provided.

Abstract not provided.

Abstract not provided.

We present techniques and a system for synthesizing views for video teleconferencing between small groups. In place of replicating one-to-one systems for each pair of users, we create a single unified display of the remote group. Instead of performing dense 3D scene computation, we use more cameras and trade-off storage and hardware for computation. While it is expensive to directly capture a scene from all possible viewpoints, we have observed that the participants viewpoints usually remain at a constant height (eye level) during video teleconferencing. Therefore, we can restrict the possible viewpoint to be within a virtual plane without sacrificing much of the realism, and in cloning so we significantly reduce the number of required cameras. Based on this observation, we have developed a technique that uses light-field style rendering to guarantee the quality of the synthesized views, using a linear array of cameras with a life-sized, projected display. Our full-duplex prototype system between Sandia National Laboratories, California and the University of North Carolina at Chapel Hill has been able to synthesize photo-realistic views at interactive rates, and has been used to video conference during regular meetings between the sites.

Abstract not provided.

Abstract not provided.

Abstract not provided.

This Corrective Measures Evaluation report was prepared as directed by a Compliance Order on Consent issued by the New Mexico Environment Department to document the process of selecting the preferred remedial alternative for Tijeras Arroyo Groundwater. Supporting information includes background concerning the site conditions and potential receptors and an overview of work performed during the Corrective Measures Evaluation. The evaluation of remedial alternatives included identifying and describing four remedial alternatives, an overview of the evaluation criteria and approach, comparing remedial alternatives to the criteria, and selecting the preferred remedial alternative. As a result of the Corrective Measures Evaluation, monitored natural attenuation of the contaminants of concern (trichloroethene and nitrate) is the preferred remedial alternative for implementation as the corrective measure for Tijeras Arroyo Groundwater. Design criteria to meet cleanup goals and objectives and the corrective measures implementation schedule for the preferred remedial alternative are also presented.

Abstract not provided.

Abstract not provided.